Solaris 10 6/06 Software companion installation
Hi Friends
I wnat to install the whole utilities available in sol 6/06 software companion dvd , during the course of installation its not giving me to select "solaris software companion" selection option , but in sol 10 1/06 it shows , what i do to install those utils
thanks
regards
Kinshuk
I know, you asked about CD, not DVD but...The download is in ISO format. Just use lofiadm to do a loopback mount of the image and you can install from it. No need to burn a DVD.
Similar Messages
-
Download Solaris 10 6/06 Software Companion S10U2 (SPARC) as ISO?
So the Software Companion CD is released on 24-Aug-2006, but when I go to download I discover that the companion software is actually distributed individually, not as a cd.
Is there any way to get the whole cd as an ISO? I need about 90 of the applications and would prefer to get them in one shot.
DemianI know, you asked about CD, not DVD but...The download is in ISO format. Just use lofiadm to do a loopback mount of the image and you can install from it. No need to burn a DVD.
-
I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
ManuelYou can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record. -
Linux, Solaris 8-10 Software Update Library Inactive
Hello All.
In the Navigation pane , in libraries , when i open Linux, Solaris 8-10 Software Update Library , the options on the left such as Upload config file , Upload local action and others are disabled.
I cannot click on them and perform an action! How can I get them enabled ?Hello
I have same problem. Could you help us. -
Hi, maybe somebody has similarly problem... After fresh windows ( XP prof) on a t61 all of windows updates, I was trying to install fingerprint reader software. Installation was OK, but first running show license agreement, that's the end - software is freezing, can't accept, go next . I was trying to run in safe mode, license is going OK, but no drivers for reader. After normal startup, software is freezing on edit or enroll fing... Ok, maybe some of windows updates. After format c:, new windows installation, I started from installing fingerprint software, and it nothing changed... I was trying to install latest version 5.82, and after format, also 5.62. First time I have this problem, I had a few t61, and never had problem, like this... In control panel , I can enroll finger and it shows ok, so reader is working... I will try to install xp sp2 not sp3... but it was working before on sp3 but on different computer, this is new one ( I had hdd from old computer t61 and reader was working fine). hope somebody help with this...
You might want to post this in the installing iTunes for Windows forum. Here's the link.
http://discussions.apple.com/forum.jspa?forumID=792 -
Cannot install software, getting installer.exe containes a virus and has been deleted
Windows Vista, IE 9. I'm conintually getting the and AVG message when I try to open IE. I've tried to reinstall the Free AVG and I receive the message "Cannot install software, getting installer.exe containes a virus and has been deleted"
Please help?I would suggest reposting your inquiry to the experts in the dedicated
Virus and Malware Forum.
Carey Frisch -
EBS software or installer for windows 2008 R2 84 bit
Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system
Hi;
The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
Please see:
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Regard
Helios -
OBIEE 11g Software only installation on Linux-64
Hi All,
I have installed Weblogic10.3 on linux-64 system and then installed OBIEE 11.1.1.5.0 software only installation in the same middleware(as cerated by weblogic)on the same linux-64 system.
So far so good.
Now i am able to see wlserver, Oracl_BI1 and /opt/beainstall/Oracle/Middleware/user_projects/domains/Weblogic/ObiEE11g(domain name).....
But i am not able to see Instance folder ?????
Even system didn't ask me for DEV_BIPLATFORM and DEV_MDS Schema path and password.
How to get this Instance folder?
Do i need to do any more configuration ?
How to make obiee11g run ??
I dont have any clue for next step..Please guide me here.....:)Hi Dpka,
Step no. 1, 2 , 3 and 4 is already done successfully.
Now today i started configuration step and get failed by ""Step Restaring Admin server failed "" error.
Error while setting control flag {0}.
Cause:
An internal operation has failed: AdminServer not Stopped.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.stopDomain(ASDomain.java:3322)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:822)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainRestartTask.doExecute(DomainRestartTask.java:32)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: AdminServer not Stopped.
at oracle.as.provisioning.weblogic.ASDomain.stopDomain(ASDomain.java:3301)
... 17 more
Executing Task: Restarting AdminServer
AdminServer port is 7001
trying to connect to DWAPPDEV.fgb.ae 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to DWAPPDEV.fgb.ae 7001
Successfully connected to the Domain Runtime ...
trying to connect to DWAPPDEV.fgb.ae 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@1e14352f
Stopping AdminServer
Stopping the domain ...
ASDomain.getMBeanServerConnection ...
ASDomain.getMBeanServerConnection ...
SVR_GRP =
Stopping Weblogic Server...
Unrecognized VM option '-UseSSE42Intrinsics'
Could not create the Java virtual machine.
Done
Stopping Derby Server...
java.lang.Exception: AdminServer not Stopped.
Can anybody know this error... byheart.....Please guide here..:) -
How can get osb software and installation and guidance ?
hi
Friend i need OSB software and installation guidance please help me any one
Thanks&Regarding
[email protected]You can download it from: http://www.oracle.com/technetwork/middleware/service-bus/downloads/index.html
Installation guide: http://docs.oracle.com/cd/E28280_01/install.1111/e15017/toc.htm
Regards,
Fabio. -
Verizon Software Update Installer??
have my S4 connected to my PC via USB... in the autoplay no Verizon Software Update Installer shows up.. how do I d/l the installer software.. trying to set this up for when the new Update comes thru for my S4.. should be soon from what i am reading... tried d/l Kies to the PC from Samsung.. all it does is freeze my FF and Chrome.. so this Verizon Software Update Installer should work hopefully once I get it d/l..
any help appreciated...I finally got it to Pop-up after numerous tries... it then took 1 hr 20 minutes to complete from start to finish... whew... all I cared about was putting just about all my apps on the 32gb micro-sd card rather than have them take up all that space on the phone
thanx -
Download problem - Solaris 10 Software Companion GA x86
i am using SDM to download the CD image
and seeing the failure (reproduceable)
Any ideas ?
Warning:Sun Dec 25 12:29:39 PST 2005:Verification failed for downloaded data at offset 0
Information:Sun Dec 25 12:29:39 PST 2005:Disconnecting via http from server sdlc-esd.sun.com
Information:Sun Dec 25 12:29:39 PST 2005:Reconnecting via http with request method GET and range 0 to server sdlc-esd.sun.com
Information:Sun Dec 25 12:29:43 PST 2005:Server sdlc-esd.sun.com reported response code 206 for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:29:43 PST 2005:Server sdlc-esd.sun.com reported response message (Partial Content) for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:29:43 PST 2005:Downloading data from server sdlc-esd.sun.com to file software_companion_x86.iso.bz2
Warning:Sun Dec 25 12:30:08 PST 2005:Verification failed for downloaded data at offset 0
Information:Sun Dec 25 12:30:08 PST 2005:Disconnecting via http from server sdlc-esd.sun.com
Information:Sun Dec 25 12:30:08 PST 2005:Reconnecting via http with request method GET and range 0 to server sdlc-esd.sun.com
Information:Sun Dec 25 12:30:12 PST 2005:Server sdlc-esd.sun.com reported response code 403 for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:30:12 PST 2005:Server sdlc-esd.sun.com reported response message (Forbidden) for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:30:12 PST 2005:Disconnecting via http from server sdlc-esd.sun.com
ERROR:Sun Dec 25 12:30:12 PST 2005:Connection to server sdlc-esd.sun.com failed for file software_companion_x86.iso.bz2
ERROR:Sun Dec 25 12:30:12 PST 2005:Unable to complete downloading of data from server sdlc-esd.sun.com to file software_companion_x86.iso.bz2i am using SDM to download the CD image
and seeing the failure (reproduceable)
Any ideas ?
Warning:Sun Dec 25 12:29:39 PST 2005:Verification
failed for downloaded data at offset 0
Information:Sun Dec 25 12:29:39 PST
2005:Disconnecting via http from server
sdlc-esd.sun.com
Information:Sun Dec 25 12:29:39 PST 2005:Reconnecting
via http with request method GET and range 0 to
server sdlc-esd.sun.com
Information:Sun Dec 25 12:29:43 PST 2005:Server
sdlc-esd.sun.com reported response code 206 for file
software_companion_x86.iso.bz2
Information:Sun Dec 25 12:29:43 PST 2005:Server
sdlc-esd.sun.com reported response message (Partial
Content) for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:29:43 PST 2005:Downloading
data from server sdlc-esd.sun.com to file
software_companion_x86.iso.bz2
Warning:Sun Dec 25 12:30:08 PST 2005:Verification
failed for downloaded data at offset 0
Information:Sun Dec 25 12:30:08 PST
2005:Disconnecting via http from server
sdlc-esd.sun.com
Information:Sun Dec 25 12:30:08 PST 2005:Reconnecting
via http with request method GET and range 0 to
server sdlc-esd.sun.com
Information:Sun Dec 25 12:30:12 PST 2005:Server
sdlc-esd.sun.com reported response code 403 for file
software_companion_x86.iso.bz2
Information:Sun Dec 25 12:30:12 PST 2005:Server
sdlc-esd.sun.com reported response message
(Forbidden) for file software_companion_x86.iso.bz2
Information:Sun Dec 25 12:30:12 PST
2005:Disconnecting via http from server
sdlc-esd.sun.com
ERROR:Sun Dec 25 12:30:12 PST 2005:Connection to
server sdlc-esd.sun.com failed for file
software_companion_x86.iso.bz2
ERROR:Sun Dec 25 12:30:12 PST 2005:Unable to complete
downloading of data from server sdlc-esd.sun.com to
file software_companion_x86.iso.bz2 -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
hi, my software for example games , installation with another apple id and i want to update software but i cant , how can do this change ? i should go to itunes store to do this change or i cant at all?
you can change your apple id or password etc here http://www.apple.com/support/appleid/
Good Luck
Matthew -
Installing Office 2011-Says software for installation not available
I've seen this same issue posted, but never found a resolution to the problem. Office 2011 14.3.9 will not install on Mac Air that is running OS X Version 10.8.5. Message says that the software needed for installation is not available on my computer.
What version of Office do you now have? You must have 14.3.8 to install 14.3.9. And 14.3.8 requires 14.3.7, etc.
-
Software-Driver Installation with Windows 8.1
After installing the Win8.1 "upgrade", I was able to print with my Photosmart Premium C410a, but several days later when I first attempted to scan, I was unable to. Though there is an HP Printer Control tile on my Start screen, when I launch it, there is an option to install the full-featured software (which used to be functional). When I'm able to download the software--and it's not always successful--I get the splash screen with the option to Install or Exit. When I choose Install, I get an error message telling me that the system cannot find the file specified. Meanwhile, I have what used to be a fully functional all-in-one that only prints!
Per HP guidance on Facebook, I did a fully uninstall, a clean boot, and then attempted to install, and get the same results.
Needless to say, I'm quite frustrated with HP.Hi kdbeatty_75
I understand you are unable to install the software. You are getting a message that the file specified can't be found.
Run the installation again.
When you get the error find out the file specified not found name.
Then copy the 7z directory to another folder on the desktop by the name file specified can't find.
Go to the start up screen, (tiles menu) type
%temp%. Look for the 7z folder (example 7zs2356) right click on the folder and select copy, close that window, on the desktop, right click and select paste. Right click the folder and select rename, type in the name of the file not found, press the enter key.
Close out the installation.
Run the installation from the new folder. Should have one called setup or setup.exe.
Here is a post of the same issue that had been resolved. Click Here.
Let me know if those steps worked properly.
If not please let me know the results.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Maybe you are looking for
-
I have an ipod nano ( the small square one) which is 3 mo old. Yesterday, after charging, I noticed that the face was black - totally blank. I tried turning it on but of course nothing happened. I can't tell if it's on or off. No sound, no screen
-
How can i check for virus in my macbook pro
Hello every body is any one have a trouble shooting to open their cam automatically
-
What is the incentive for us to gain points?
Hello everyone, what is the incentive to gaining points and getting badges (other than reputation building) please?
-
WLC-5508 Authorization failed to create SSID
Hi All, I have two WLC-5508 for 50 AP's deployed. One is primary controller & other is secondary. Recently noticed an unknown "authorization failed, no sufficient privileges for user" message poping up while making configuration changes in WLC. Speci
-
Daemon and signal handling in Sol 9
hi, Is there any change in the was the daemon are created in sol 9. I am creating a thread from a process. I am waiting for a signal in the thread using sigwait. Also I am making the main thread a daemon. The sigwait function is returning an error in