Solaris 10 installation problem on IBM Thinkpad - T43

Dear All,
I have a major problem while installing Solaris 10 on my IBM T43 Laptop. Here is my problem:
- I boot from Solaris 10 DVD
- I select the option "Solaris" from the grub menu
- I get 6 installation options
1. Solaris interactive(Default)
2. Custom jumpstart
3. Solaris interactive text(desktop session)
4. Solaris interactive console
5. Driver update
6. Single user shell
- I select option 1(solaris interactive)
- After some processing, I get the "proposed configuration" screen, and an option to accept/reject it.
- I reject the proposed configuration and, as a result enter the "kdmconfig" wizard.
- After this screen, I tried selecting various resolutions, but no matter, I get a blank screen in place of the graphical installation wizard after quitting kdmconfig.
As a result, I am never given a chance to install solaris at all. Can anyone you please dig me out of this hole?
Regards,
Thejasvi V

after some time a console login came with no graphics
I logged in with root and password everything went ok
but still no graphics was there then console
automatically tried to lunch the x windows by giving
message starting x login in display 0x...... butWhile you still have no graphics type, /usr/dt/bin/dtconfig -d as fast as you can and press enter. This will prevent the GUI from starting. Then type kdmconfig and set your parameters. Then use the "test" button to see if the settings that you chose actually do anything. If they just result in a blank screen or a system freeze, then head over to Linux Laptops and search for your Laptop brand.
Most of the systems on that site have thier X.org configuration online available for viewing. This will help guide you to setting up your graphics/monitor on your system.
alan
after that my monitor screen got blanked and I had to
restart my pc, I tried 3-4 times but still its not
supporting the display of my monitor and also I am
not able to find the settings to change the display.
Please help me ...
Abdul Mohsin
[email protected]

Similar Messages

Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

Hello,
I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
loading stage2 ....
GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for 1x50, v60x and v65x
SunOS Release 5.10 version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
Use is subject to license terms
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
Thanks

Did you try install check CD before the installation?
I think that there might be two main reasons:
1. Your computer is not supported
2. Hard drive may need to be formated to FAT32 or UFS

Solaris 8 installation problem on an Intel base PC

I'm quite new with Solaris. I got stuck in Solaris 8 installation just at almost the very beginning. After booting up the system from floppy and conituing pressing F2 and selecting booting from CD, I got an error message like:
cannot mount on pci@0; 0/pci-ide@7; 1/ide01/sd@0; 0:a
panic[cpu0]thread=FEC17440 vfs:mountroot
then, the system reboots itself again and again every time it reaches this point. I guess it's a problem with my CD-ROM. But the problem persists even if I change CD-ROM or move CD-ROM from secondary master to primary slave, etc. I also tried to change harddisk, but did no good to the problem. Is there any experienced users who could provide me with some solutions?
I'm using a system with: Pentium 133, 32 MB Ram, 4GB HDD, 3C905TX, ATI Rage II PCI, Matshita CR-587 CD-ROM, Serial mouse and so on. I also tried another system with: P III 450, Asus P3BF, 192MB Ram, Pioneer DVD-ROM, same HDD, and so on. The problem was still there with the latter system. However, I successfully installed Solaris 7 with the latter system before. Why can't it work with Solaris 8?
Thanks a lot for the help.

I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug

[Solaris 10] Installation problem on nForce4 Ultra - SATA II - raid 0

hi,
Like I was read on HW web page, Solaris 10 should work fine with 'nForce4' (without 'Ultra'),
but on mine mainboard (nForce4 Ultra) instalator was unable to found my array.
I have ASUS A8N-E (nForce4 Ultra) with 2x 250GB Seagate on SATA II RAID 0.
Is it posible to install this OS on 'nForce4 Ultra' or maybe I am doing sth wrong ?

Hi, I have the similiar problems on Solaris 10 installation.
I have a Compaq SR1710 AMD Sempron™ + 1GB RAM. I am trying make it a mini workstation.
However, the installation was never able to throught.
It always stop or freeze on the "dos" screen after I select "interactive" installation.
The last error message I got was something "Skipped rtls01" something.
I am trying to install Solaris 9 now, so far on disc 2.
Very smooth. No problem..
hope someone can give me advise on how to install version 10 on the machine.
BTW, I checked teh HCL. It seems ok, given my machine is very basic.

Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails

Dear colleagues,
tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Documentation states 'AIX 4.3.3 or later required', no clear indication for AIX5, though. Any ideas or suggestions?
I understand, it is possible to roll back to AIX 4.3.3, although machine came with 5.1 pre-installed.
Alexei

I had the same problem and finally used the loadext program from the 64-bit cpio-archive (Disk1). Just replace the file and startover again.
It worked and still works!
Hope this helps.

Solaris 10 Installation Problems

I recently tried (several times) to install Solaris 10 on an x86_64 AMD machine with a SATA hard drive, but I kept running into problems. When using the boot DVD, it booted a temporary desktop, and asked me several questions. At the end it asked if I wanted to install from a CD/DVD or somewhere else. I clicked CD/DVD and clicked continue, and it said "Unable to read from disk, please ensure your disk drives are powered up" or something similar. From there, I am unable to eject the CDROM, and if I click Cancel it brings up the terminal - but I can't figure out how to reinitiate the installation from there.
Any ideas why it keeps doing this? I really want to use Solaris but I can't even get it installed!
Thanks.

Another error message:
Auto-layout was not successful because of disk space problems.
to resolve this problem, you can reduce the number of file
systems for auto-layout, or you can manually layout file systems.

Solaris 8 installation problem on Dell PowerEdge 500SC

Hi,
I am having TWO PROBLEMS installing Solaris 8 on Dell PowerEdge 500SC.
This hardware spec is:
Pentium-III at 1GHz
256MB 133MHz ECC SDRAM
20GB 7200RPM ATA100 EIDE hard drive (on integrated ATA-100 controller)
48X EIDE CD-ROM drive (on integrated ATA-100 controller)
Motherboard: unknown
more details: http://www.dell.com/us/en/esg/topics/esg_pedge_sc_towermain_servers_3_pedge_500sc.htm
FIRST PROBLEM is the following message was shown at the hardware probe.
WARNING: ACPI Tables not in Reclaim Memory
Warning: Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
Port: C00-C01, C06-C08, C14, C50-C52, C6C-C6F,
CD6-CD7
F50-F57
ACPI device: PNP0C01
Port 814-85B, 580-58F, C00-CD7, F50-F58
At this time, I was using "Solaris 8 (Intel Platform Edition) 10/01" released version.
I am not sure what this means, but it was RESOLVED with using newer "x86 DCA boot diskette (Patch-ID# 110930-05)".
But, the SECOND REAL PROBLEM is another one. It just happens booting the kernel after the hardware probe. I get the following messages about 2 minutes later, after beginning to load kernel.
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: abort request, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: about device, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: reset target, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: reset bus, target=0 lun=0
After another 1 or 2 minutes I get more error and the system reboots.
Please give me any suggestion or advice!
Thanks.
Kazuyoshi

I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug

Solaris 8 installation problem on Dell laptop

Hi
I have Dell Latitude CPx laptop which has windows now.
I have freed space from the disk and removed the freed partition from windows control using fdisk and tried installing Solaris 8, 7/01 release using interactive install.
After initial screens scanning devices, config building, prompts for language selection. As soon as I enter 0 for English, the screen prints junk charcters and beeps continuosly and hangs.
Do any of you have a clue, to get over this problem.
Also please let me know, how to disable PnP feature in BIOS, since I didn't find PnP in BIOS setup.
Thanks in advance for help.
Ram

There seems to be a patch available at http://sunsolve.sun.com
Patch-ID # 112352-01
Hope it's what you were looking for.

Solaris 8 installation problems

Hello,
I'm trying to install Solaris 2.8 on a Compaq server.
I have the tree cd's downloaded from your site.
config: internal ultra scsi 2 ctrlr with 1 * 18gb H/D
internal ide ctrlr with cd drive and diskette drive
In both ways , i do an update driver to recognize the internal H/D .(F4 menu at first screen)
1.When i tried to boot from Installation cd , I've a message saying : no disks that meet the criteria in the Solaris installer documentation found !! (but the disk is present when i do a format cmd and i don't know which criterias are needed ?
2.When i tried to boot on software cd 1 , i can load the software on the disk, but after that, the installer ask me to put the diskette labeled CPQNCR26350 in the diskette drive .
I put the diskette in the drive (the previously used diskette i use to update drivers at first screen) but the program said : driver cpqncr not on diskette ??
I'm sure it's the correct one .
Can anybody help me ?
Thanks for answer !!

Thanks for answer.
I've tried this m�thod:
1. Booting from dca diskette
2. Updating drivers with DU diskette (cpqncr.itu,smartii;itu,cpqfcs.itu,cpqary2.itu)
3. Continuing using cdrom 1 of 2 in interactive mode.
After that i've the message :
Solaris 8 s/w installation succeeded
Customizing system files --> ok
Customizing system devices --> ok
Installing boot information --> ok
Installing unbundled device driver support
Extracting driver list from tree ..
CPQNCR26350 drv/cpqncr
Please insert the DU diskette labeled CPQNCR26350
Press <ENTER> when ready
... I insert the diskette here ... and --> following message appears :
Driver cpqncr not on diskette
What's wrong ?
The only things I've seen is :
When i've construct the 4 DU diskettes, when QRST5.EXE has been executed to make the 4 disks, the messages on screen was :
Compaq Solaris DU diskette for Solaris 2.6 !!!!! and also in the readme files on DU diskette, 2.6 appears, but these drivers have been take from Solaris 2.8 link !!!
Perhaps it's the reason it doesn't see it as the correct drivers ?
Do you have other link to download the drivers ?
Thanks for your support.

Solaris? Aolaris? - Solaris 10 installation problem

Hi, gurus,
I downloaded the Solaris 10 GA bits, and successfully installed it in 1 of my PCs very smoothly, the feeling is so good. But when I tried to install it into another PC, I meet big problem.
I can not boot from the CD, the system hangs when I got the messages bellow (The first message of the booting progress):
" Aolaris Primary Boot Subsystem" "v2.0"
Something strange that here "Aoloris" not "Solaris".
I know that someone solve this problem by disable "FDD Legacy Support" from BIOS settings. But I checked my BIOS, there is no such setting.
Any suggestions? comments?
BTW, my hw is "Tsinghua Tongfang Computer" from a Chinese manufacturer.

Finally I got the solution. Just change the USB settings in BIOS, and the problem solved.

Solaris 10 installation problems through IP-KVM and Realtek NIC drivers

I'm on an IP-KVM connection to the server, the installation failed with the message:
ERROR: Could not create the product file
ERROR: Could not install all packages. Product installation failed
mkdir: "/a/var/sadm/launcher": I/O error
Could not install all packages. Product installation failed
I tried a full install, I'm going to remove some of the unnecessary packages from the install list and try again. This media has been successfully used to install before so I'm hoping that would work. If anyone has any info though regarding the failure, please advice.
One of the problems is that the IP-KVM doesn't allow me to power the server off and on. When the install fails in the desktop console mode like this, is there a way to send a command to reboot the server? Sending ctrl-alt-del through the kvm client doesn't do anything. In case this happens again I'd like to be able to reboot myself.
I'm retrying the install in the console desktop mode so if it fails again I can probably open up a terminal window and issue the reboot command.
Also, the install is not recognizing the Realtek nic. It's an onboard controller in an Intel motherboard. Has anyone had any luck/tips on getting the drivers from www.realtek.co.tw to work? I haven't gotten to that stage yet but any advice would be appreciated for when I do.
Thanks

I'm on an IP-KVM connection to the server, the installation failed with the message:
ERROR: Could not create the product file
ERROR: Could not install all packages. Product installation failed
mkdir: "/a/var/sadm/launcher": I/O error
Could not install all packages. Product installation failed
I tried a full install, I'm going to remove some of the unnecessary packages from the install list and try again. This media has been successfully used to install before so I'm hoping that would work. If anyone has any info though regarding the failure, please advice.
One of the problems is that the IP-KVM doesn't allow me to power the server off and on. When the install fails in the desktop console mode like this, is there a way to send a command to reboot the server? Sending ctrl-alt-del through the kvm client doesn't do anything. In case this happens again I'd like to be able to reboot myself.
I'm retrying the install in the console desktop mode so if it fails again I can probably open up a terminal window and issue the reboot command.
Also, the install is not recognizing the Realtek nic. It's an onboard controller in an Intel motherboard. Has anyone had any luck/tips on getting the drivers from www.realtek.co.tw to work? I haven't gotten to that stage yet but any advice would be appreciated for when I do.
Thanks

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

How to install Solaris 8 on IBM Thinkpad T20 laptop

Hello,
I would like to install Solaris 8 on my IBM Thinkpad T20 laptop and I am facing two kinds of problems:
-1- I cannot boot on the Matshushita DVDROM which is shipped with : i have got a boot panic ;
-2- My SAVAGE/IX 8MB Video Card is not recognised.
ANY HELP APPRECIATED
[email protected]

Hi There,
Although laptops are not officially supported, I am aware that another
customer managed to install their system over a network connection
due to local CDROM issues.
This may be something to try if you have access to another SOlaris System with a local CDROM.
As for the Video Card, I have not found any records of anyone
else attempting to use this particular chipset and so you may be
limited to just standard VGA in this case.
Regards
Derek SUN-DTS

T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no netowork

T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no network, so installed drivers for the chipset and network. Still no way to go on inernet.
Folloing drivers i installed from following site. What do I do now:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT035703
Oss50w – chipset driver
7ora09ww – Ethernet driver
1ywc54ww – wifi driver

Hi guys and thanks for your help. Yes, after authenication and working on this Windows partition, I have less than 3GB space. Also, I cannot drag and drop files from desktop, like a text file into the Windows partition. Says it doesn't have permissions to drop files.
It looks like now I will in fact have to start from scratch and repartition the HD but put in a minimal 12GB or so into the Windows partition. Also, I tried to name the Windows label, but it's locked and under get info, it says the Windows partition is read only, ownership grayed out and says it is NT coded format. Shouldn't that be MS-DOS or FAT 32 automatically?
I have to tell all of you that this is getting time consuming, too complicated and when I get my own ProBook, I have no desire to install VISTA or MS whatever. Plus, we have to still do the MS security pack updates and install virus software for the Windows partition, isn't that correct?
Is there a step by step link here like a BootCamp/Windows XP Pro installation tutorial so I can move a bit faster on my next attempt?
Thanks SteveB

Solaris 8 on Intel STL2 server board - installation problem

Hi,
I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
Booting kernel/unix...
SunOS Release 5.8 Version...
then reboots after 2 seconds.
Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
Finally, I found the very strange specification update info of STL2 board, published by Intel:
"13. Sun* Solaris* 8 installation issues
PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
I would appreciate any help. Thanks.
Matt

The problem has been resolved.
I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
Matt

Solaris 10 installation problem on IBM Thinkpad - T43

Similar Messages

Maybe you are looking for