Solaris 8 installs but wont boot

I am trying to install Solaris 8 on a Compaq Proliant DL360 i am using software cd 1 to do the install, downloaded the raid array drivers for Solaris and the install seems to go fine with no errors. The problem is when it reboots it goes the the screen where you choose which partition to boot from. the choices are:
1 diagnostics(compaq utilities)
2 x86boot active
3 Solaris
when you choose "2" it just boots to the setup screen like i was booting from the CD. If you choose "3" it switches to a screen that says 'booting selected partition' and it says at the bottom of the screen, "BAD PBR SIG" What am i doing wrong?

Hmm, you're using the raid array driver diskettes from compaq.
At the end of the installation (copying stuff from the
software 1 of 2 cdrom), did it copy the compaq
array drivers from the diskette to the fresh solaris
installation; before it rebooted?
Otherwise, your system seems to crash with a kernel
panic. The strange thing is that the install kernel booted
from the software 1 of 2 cd together with the raid drivers
from the compaq itu diskette had no problems installing
the OS to the scsi raid array.
Can you post more details about the crash / kernel panic?
If the system automatically reboots before you can take
some notes about the kernel panic, try to give the
command "b kadb -v" at the "(b) boot or (i) interpreter ..."
prompt.
What's the size of the raid array?
What happens it you boot from the DCA floppy, add the scsi
raid drivers from the compaq itu floppy and boot from the
software 1 of 2 cdrom. After the GUI starts, try to
open a shelltool/commandtool window (right click on the
desktop background). From the commandtool window you
can try to fsck / mount the scsi raid array. Does that
work?

Similar Messages

  • I reinstalled osx 10.8.2 from recovery disk, now verify disk says my hard drive is there but wont boot into it regardless which partition i select to boot into , everytime it boots me into the recovery, i need help!

    Mb pro running like garbage with 10.8.2 tried a reinstall of osx from recovery utility now the utility says my hard drive is ok but wont boot into it keeps booting me back into recovery tried restart option to select disk tried using the select startup disk from recovery, gives a message asking if i really want to boot to it and in that message is the only rime it shows a question mark on the drive dont know what to do cant find similar issue

    Your rushing and not making much sense.
    Your machine was running like garbage, so you tried to reinstall 10.8---did you do this or not?
    Disk Utility says your drive is ok, that's good.
    But when you boot it keeps booting Recovery HD, so perhaps the firmware has made a mistake, it can forget.
    You held the option key down to boot into Startup Manager, why didn't you select OS X for the boot volume?
    When you get into OS X you change the Startup Disk in System Preferences, that should take care of the Flashing Question mark issue.
    attemtping to ireinstall osx from recovery partition bar is full on install screen, but im now at -6hours remaining
    So now your reinstalling OS X like you set out to do before, it does take some time as it has to download from Apple's servers.
    If your Internet connection is slow and/or Wifi is slow then it will take awhile.
    So you should have the Flashing Question Mark and Reinstall Only OS X covered.
    You should be able to boot the machine, but your performance issues may be something else and still remain.
    Why is my computer slow?
    Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • HI my Ipad Upgrade to Ios7 but wont boot up

    HI
    my Ipad Upgrade to Ios7 but wont boot up , and when connected to the itunes 11 show IOS7, HI my Ipad Upgrade to Ios7 but wont boot up , and when connected to the itunes 11 show IOS7 but hanged in apple logo
    I wait for 7hours but it cant loaded.

    If the reset doesn't work, force the iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Have a late 2006 iMac with new Ram installed in late 2011 . I am currently running Mountain lion. Did/ hit something while half asleep and was asked for my recovery password didn't know it.Not sure what i did after that but wont boot just searches,

    I have a late 2006 iMac with new Ram installed in late 2011or early2012 . I am currently running lion. Did/ hit something while half asleep and was asked for my recovery password, I didn't know it & not sure what I did after that but it wont boot up just searches with a light grey whit -ish screen. Cant get it to clear. Any advice?
    Charlies Secret Angel-

    Try to boot in Safe mode, see if you are able: Hold down shift and then power on. For wireless keyboards, hold down shift after the chime.
    Safe Boot
    Resolve startup issues and perform disk maintenance with Disk

  • Flash Player Installs but wont work.

    Hello,
           I am currently having a proble with my parents computer and Adobe Flash Player 10.1.
    It downloades and installs but when I go to a site to check it for example poker on facebook, all it says is i need the latest version of Adobe Flash Player.
    Theyr copmuter OS is Windows Vista 32-Bit, Have java 6 u 23. I have uninstalled and reinstalled multiple ties, still the same thing. I tried the logo thing that Adobe offers to check as well and it doesnt show either. I looked in the C:/ folder area where it tells you to look and the only file in there was a Flash text document. That i know is not right, but every install is the same one file. Got tired of fighting with it for an hour and decided to come home and post on here and see if anyone could help. And using IE8.

    Hi, if there are no files in the Flash folder(system32) except a text doc, then Flash Player is not Installed.
    The Administrator Account must be used to Uninstall/Install Flash Player.
    When you were Installing did you receive any error messages? If not then you would need to Uninstall and Install again.
    Download and SAVE to your Desktop the Uninstaller:
    http://kb2.adobe.com/cps/141/tn_14157.html 
    Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
    Close all browser windows, you only want to be looking at your Desktop.
    Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
    If you use Norton or McAfee Anti-Virus, you would want to disable that also as they can block the Shockwave Flash Object.
    Be sure to use the Administrator Account.
    Run the Uninstaller and when finished, Reboot(restart) your computer.
    Run the Installer for IE, Run the Installer for FF and when finished, Reboot.
    Then go to this test site and test each browser:
    http://www.adobe.com/software/flash/about/
    You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
    Thanks,
    eidnolb
    http://forums.adobe.com/people/insu**

  • I updated my mac and after the installation it wont boot up, i updated my mac and after the installation it wont boot up

    i updated my mac and after the installation it wont bootup

    No chimes just the normal startup sound and then that's it stops with the apple logo and shuts down tried most of the short cuts like command +r command p+r nothing works

  • Solaris Installed but wont boot

    Compaq Deskpro 266
    This is a straigt forward machine, no whacky install or hardware.
    3 Gig HD
    Whole harddrive has been allocted for sun.
    The installation goes like a charm, I reboot the machine and pull the cd.
    It autoboots to the correct partition (I selected nothing and let is select). Then it seems to hang after that (blank screen with a blinking cursor in the top left).

    Is there an option in the BIOS to disable "USB interrupts"?
    Even if you have no USB peripherals connected, make sure
    to enable such an option (USB IRQ: Enabled) in the BIOS.
    Upto MU3 this setting didn't matter, but the latest
    USB patch - which is part of the MU4 update (Solaris 8
    4/2001) - hangs if the kernel sees the USB hardware but
    the hardware's IRQ is not working.

  • Tiger 4.6 won't install - keeps restarting but wont boot from the dvd

    hello,
    I purchased a brand new Tiger 4.6 retail directly from apple.com to install on my second computer, which is an imac that meets the system requirements. I am having exactly the same issue - i load the dvd, and the window opens and i double click on the installer. This prompts me to restart by clicking the button in the window, which I did. Then the computer restarts but the installer does not run. When i click on the installer it gives me the same restart window. I have tried holding the C button during reboot, and i have tried changing the boot drive through system preferences as well, but this does not work either.
    Can someone PLEASE offer information that will help me to install this OS?
    thanks
    [email protected]

    I went back to look because I wanted to make sure I wasn't crazy and was clear on what I saw before, and why it was unclear and ambiguous.This is the page with the complete sys requirements(the photos wont display here, but there is a photo of my model of imac, under the "imac" category):
    http://www.apple.com/macosx/upgrade/requirements.html
    Make sure your hardware can run Mac OS X Version 10.4 Tiger
    Mac OS X Version 10.4 requires a Macintosh with:
    * PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256MB of physical RAM
    * A built-in display or a display connected to an Apple-supplied video card supported by your computer
    * At least 3.0 GB of available space on your hard drive; 4GB of disk space if you install XCode 2 developer tools
    * DVD drive for installation (get CD media for $9.95)
    Note: Mac OS X does not support processor upgrade cards. The amount of disk space required depends on your computer and the way you are installing Mac OS X. (this would have been the place to include the text about not supporting the imac 350)
    Verify your hardware is supported from the list below.
    Power Mac
    PowerBook
    (photos)
    Mac mini & iMac
    (photos)
    eMac
    (photos)
    iBook
    Power Mac G5
    Power Mac G5 PowerBook G4 (12,15, 17-inch aluminum series)
    PowerBook G4
    (12, 15, 17-inch aluminum series) Mac mini
    Mac mini eMac (ATI graphics)
    eMac (ATI graphics) iBook (12.1" & 14.1")
    iBook (12.1" & 14.1")
    G4 Dual Processor
    Power Mac G4
    (Dual Processor)
    PowerBook G4 (DVI Video)
    PowerBook G4
    (DVI Video)
    iMac G5
    iMac G5
    eMac
    eMac
    iBook, SE (FireWire)
    iBook (FireWire)
    iBook SE (FireWire)
    G4 Quicksilver
    Power Mac G4
    (Quicksilver)
    PowerBook G4 (550,667)
    PowerBook G4 (400,500,550,667)
    iMac G4 flat panel
    iMac (flat panel)
    Cube
    Power Mac G4 Cube
    PowerBook G3 (Firewire)
    PowerBook G3 (FireWire)
    iMac (slot loading)
    iMac (slot loading)
    (photo looking just like my imac)
    G4
    Power Mac G4
    Power Mac G3
    Power Mac G3
    dell dimension 8200   Windows XP   imac 350 power pc G3 Mac OS X (10.3.9), ipod 2nd gen nano

  • Hard Disk verifies OK but wont boot. Can't re-install or erase.

    I have a problem with my Powerbook (Tibook) G4 667.
    It won’t boot. After the initial grey screen, it gets as far as a completely blue screen and eventually resorts to the Darwin console (?).
    I'm running OS X 10.4.? (sorry - can’t remember when I last updated this machine). The 40 Gb internal drive is partitioned: HDA (start-up disk) 35 GB; HDB 2.5 Gb; HDC 2.5Gb.
    This is the ‘family’ computer and is shared by five users for internet and general use.
    I don’t use this machine often as I also have a 17” G4 1.5 (Alubook) running 10.4.7.
    When I was told that it was behaving oddly I managed to save the ‘Users’ folder onto an external FW drive.
    I can access the drive from my Alubook connected to the sick Tibook in FW target mode, although the Tibook HDA (the start-up partition) takes ages to show up on the Alubook desktop.
    I have run Disk Utility from both the Tiger installation DVD and via FW from the Alubook and each time all partitions verify OK. I’ve run repair as well and this also gives an OK verdict.
    As I now have copies of the data on the drive I have tried reinstalling the system from the Tiger DVD but the drive does not appear as a destination for installation (it doesn’t appaear at all, just the DVD and Network options are visible). I have tried to erase the drive but I get an ‘I/O error’ message when attempting to erase from the DVD disk utility and a ‘Can’t unmount disk’ error when attempting via FW from the Alubook.
    I’ve tried everything along the lines of ‘fsck’ etc. as advised by Apple at the link below
    http://docs.info.apple.com/article.html?artnum=106214
    Everything checks out ‘OK’ though I did get a line mentioning I/O error on one ‘fsck’ cycle but it still reported everything as being OK.
    It may well be that the drive is dead, but all the tests keep telling me it is alive.
    Does anyone have any ideas?
    Thanks very much.
    Phil

    Hi Phil,
    Welcome to Apple Discussions.
    It sounds like while booted from the Tiger install disc, DU can see the HD to run Repair Disk (which returns an "ok" message), but the installer cannot see the HD to do an installation? As arnie has said, it could be the HD, but could also be other hardware such as the logic board, RAM, or a cable.
    Any chance the external FW HD you mention is a 2.5"/portable? If so, I would install it in the PB, boot from the Tiger install disc, and see if the installer will recognize it as an installation destination (make sure you don't go beyond that step or you will be installing the OS over the data you have saved on the HD). If it is recognized, looks like time to purchase a new HD. If not, time to start looking at other components.

  • HP HDX18t light up but wont boot. Blinks once

    I own a HP HDX18t
    Windows Vista SP1
    8 Cell Lithum Battery
    9600 M GT Graphic
    Intel Core 2 Duo Processor P6700 (2.53)
    Purchased new online in May 2009.
    Laptop lights will come on when pushing power on button and I can hear it starting but after a few seconds lights by capslock and numlock begin to blink.  Sequence appears to be one blink, then about 2 second pause, then one blink again, then it repeats.  I've taken battery out, waited a few minutes and replaced.  I have take battery out, held down power button for 60 seconds, then replaced battery.  I have tried powering on with battery removed.  No matter what I do, it's the same results as stated above.
    When ordering I got the graphics card upgrade, but applications that utilize the card crash the laptop in a few minutes from overheating, so I just stopped using graphics intensive applications.  Volume controls stick often going all the way up or all the way down with one momentary press of the button.  Power cord connection has worn out so much that I purchased a new battery charger, but it still fits in loosely.  I had been using the new charge for about a month before today when it wont even turn on.   I was considering ordering the dc power interface that's built into the laptop because even with new batter charger you had to wiggle it just right to get the light to come on showing that it was charging.
    All this I can live with or work on later and I only mention it in case it pertains to the major problem of not being able to start the laptop.  Forum searchs suggested that "one blink" indicates a CPU failure, so I'm looking for confirmation on that.
    I have a fair amout of experience building desktop PCs from scrach but have not yet attempted repairs or upgrades on laptops.
    Any help is appreciated.

    I have worked on the HDX18 series quite a bit buying up old used ones and rebuilding them.
     I am not familiar with the codes, but CPU failure is rare, remove one stick of RAM and see if it will boot up, if not try the other stick. It also sounds like a corrupted BIOS and I have a fix for that too, if it's not too far gone.
     The cooling vents need cleaning out and some new thermal greece applied and possibly some new thermal pads, that should solve the overheating and crashing problems, IC Diamond is great.
     The power plug on the laptop is not part of the MoBo and e-bay has tons of these.
     http://www.ebay.com/sch/i.html?_trkparms=65%253A12%257C66%253A4%257C39%253A1%257C72%253A5559&rt=nc&_...
     http://www.ebay.com/itm/New-DC-IN-Cable-Power-Jack-HP-Pavilion-DV8-HDX18-Series-/300572963177?pt=LH_...
     HP Media Services Library to take it apart.
     http://h20574.www2.hp.com/default.htm?lang=en&cc=US&hpappid=psml
     A thread from me to help address the volume OSD problems, there are some youtube videos there as well to help get it apart. The most difficult is the speaker cover and the hot key bezel around the keyboard.
     http://h30434.www3.hp.com/t5/Notebook-Hardware/dv8-and-HDX-Series-OSD-Pop-Up-Solution/td-p/816295

  • Iq touchsmart black screen , beeps but wont boot

    My touchsmart IQ510 stop working, tries to boot but drive but stops , screen black but beeps, re installed factory recovery on other pc but stiil the same , cannot get to bios settings as per trouble shoot or anything as it sits whiring away but no screen, only used this machine about ten times top from new, fans etc all clean

    Hello Oscar
    Which notebook model do you have?
    Have you created recovery DVD?
    Is recovery installation finished properly?
    Do you have this problem now at first start after recovery installation?
    Can you start OS in safe mode?
    > How do I get the Product Recovery disc to reload onto the Hard Disc?
    As far as I know there is no mechanism to force recovery disc to do this.
    All you can do is to set BIOS to default settings and try again.
    I cannot say for sure but somehow I think your HDD is troublemaker.

  • Itunes installs but wont load up

    I have installed itunes 9.0.2 64 bit on windows 7 64 bit computer. It wont load at all. itunes.exe*32 starts up in the task manager applications then quickly disappears and nothing more happens. I have tried downloading again, and removing all apple applications and registry refs then reinstalling but that doesnt work either. I have tried turning off virus programs, checking computer for malware and spyware.
    I dont know what to do next. I just cant get it to load. It worked prior to the itunes 9 upgrade. but now i cant go back as I have uninstalled everything.
    I was dreaming of an iphone - I guess that is out of the question if I cant get the software to work at all

    I do use norton 360 so maybe some vodoo there?
    Possibly, although I tend to associate a Norton-related (generally speaking, "firewall-related") error-message-free iTunes launch failure with an iTunes.exe appearing in process manager and never going away (rather than the quick flash of an iTunes.exe that you're seeing).
    Could you check something for me, please? Try to launch your QuickTime Player. Does it launch properly, or do you get odd things happening when you try to launch that too? If odd things happen, could you describe them for us?

  • SO8 Prod Update 2 installs but wont allow prog to open

    I've dowonloaded 120187-02.zip for Windows and installed it on my machine. After an apparently successful update I go to launch Writer (or any programme) to get an error message which reads ...
    The application cannot be started.
    Configuration - descendant Element 'CrashReporter' not found in Node
    /org.openoffice.Office.Recovery
    I'm using XP Pro svs pack 2
    AMD ATHLON 64 XA DUAL CORE PROCESSOR 3800+
    2.00GHZ 1.00GB RAM

    I Have noticed this on machines that update from update 1 to update 2...the solution is
    as follows. Uninstall Update two from Add/Remove programs. Run the add/remove from the add/remove for Star Office, or the installer from the original disk...and choose "repair" option...let it do the repair....then install the update 2 and it will work. I have noticed that you can install update 2 on a new intallation of Star Office, but if it already has Update 1 in...it's messed up and will give this error....
    I have also noticed that if you UNINSTALL update 1 first...then put in update 2, it will cleanly install.
    This must be a bug...but you'll get it working again following the procedure above

  • Help a partion shows up (Bootable) but wont boot to it!!! PLEASE URGENT

    I noticed that it had zero space left, when I boot to another partition, I can copy files and even open files...but when I boot to the Snow Leo partition, it says to copy then backup, then refomat as soon as possible.
    I would try Snow Leo install again with migration, will that work, the most important is Logic, I do not want to reinstall all my software for logic again.
    Here is the error code from disk util.
    After trying and failing to repair, it says restore and back up your files.
    Invalid sibling link
    What if I used Carbon Copy...is this a HD problem or OS problem.
    I just want to either CC it (LEOPARD) or use SNOW INSTALL and migration assistant (although there have been times when it asks for some of the serials again, not all, but some, but the music program and my website are the most important.
    What would you do? I don't like SL due to watching TV online, many of the players still do not work with SL, Lost, Numb3rs, NCIS...
    Will CC work?
    Thanks all!!! This is my living and I need it fixed. Must get a backup and time machine going
    Tiger10.11
    Leopard 10.5.8
    SL 10.1
    SL 10.2 Clean
    Those are my partitions on two EXTERNAL HD and I need the LEOPARD TO WORK, LOGIC and it's plug ins.
    Thanks - can I just drag the plug ins folder? No, that won't work - why dont we have a migration asst. that lets you pick individual programs - that would make the most sense.
    Ok. Thanks again Geniuses.

    Sure it is a 2.4 MBP The last before it went with the swipe twist and has express slot.
    Early 2008.
    The hard drive had zero space on it at one time and DW said it had no where to write the new rebuild, but I was unable to delete anything from it, I could however copy and move files from it but not delete. It now has free space as I was able to delete at one point during this process.
    The other important thing is, the one time I was able to boot from it, mail kept quiting and logic just froze the system, so am hoping maybe OYNX could help too with DW? I also use this for my web site using rapid weaver.
    As well, many of the software plug ins are huge and would take a long time to reinstall, just FYI.
    The HD is WD. It is Leopard 10.5.8 (also the one tied to my iPhone).
    It is showing on the desktop now. If I do a disk util, it is grayed out. But after the rebuild it said it was fine and I was able to delete some files. The OS I boot to is 10.5.7, all the time the repair permissions have been grayed out. I am basically back to where I was last night before using DISK WARRIOR and wondered if I should have tried CC it to another HD and see what happened, but did not.
    So what else can I tell you? The partition I need is 10.5.8, would upgrading this 5.7 to 5.8 make a difference? Surely there must be a way to get this to work. The HD is a little over a year old, never moves. Neither does the MBP for that matter. It used to move a bit but not that much anymore.
    I did not install all my logic and things on snow as the open GL was slower than leopard, plus it had trouble playing back movies online, ABC, NBC.
    Basically I want to be able to boot to this HD but when I try, the Mac just shuts down and as mentioned before DW says it is locked.
    Two External HD's
    Old one 500GB
    Partition 1 (the one that seems to be failing) has four partitions on it.
    Leopard 10.5.8 (what I need)
    Clean Snow install
    Partition 4 is a copy of my SL so if I wanted to reinstall I would not have to look for it.
    The new HD 1 Terabyte
    Snow Leopard with migrations assistant
    Free Space
    And what I am using now, 10.5.7.
    Then of course, on the mac itself is 10.4, Tiger, which I never use any more but does have important info on it.
    I also have a USB HD that I could use for Time Machine, but think it's only 150GB or so,
    The partion I need to boot, 10.5.8 is 167GB on older external 1 year and has 5,5 GB free now.
    I thought maybe snow leopard with migration assitant but is only 250 GB, or I could wipe it, do a new install and migration asst into it as a last resort, What say you.
    Thanks
    Free Space.
    Message was edited by: avidfcp

Maybe you are looking for

  • Combining Sections

    I have a newsletter in progress and I'm learning Pages as I go. But I can't seem to figure this out, I wonder if someone can help? In making the newsletter I created multiple section breaks in order to create new blank pages within which I could work

  • How to stop gpupdate /force from asking press Y / N to restart computer in cmd?

    Each time after gpupdate /force finish to refresh the policy in cmd it popup a message press Y / N to restart computer after pressed Y it popup a dialogbox press O.K to restart PC. How to prevent gpudate /force from asking press Y / N and then dialog

  • Error Sending proxy from 2 different business system to PI

    Hi All, We are trying to send the proxy to XI system from 2 different business systems. One is ECC and other is POSDM, It is successfully sent from ECC but when sending the same from POSDM we are getting following error "An error occurred when determ

  • Should n't there be a separate forum for JDev 10g and another for 11g?

    Dear experts, Since there are still long and ongoing projects using JDev 10g, it would be convenient to split this forum into two , so that searches would be faster and finding the right solution for the correct version of JDev would be easier and qu

  • BAPI_GOODSMVT_CREATE return with M7 300 Error?

    I try to create goods movement with function 'BAPI_GOODSMVT_CREATE' as following:   CALL FUNCTION 'BAPI_GOODSMVT_CREATE'     EXPORTING       goodsmvt_header = wa_gmvtheader       goodsmvt_code   = gmcode     TABLES       goodsmvt_item   = gmvtitem