Solaris 8 x86: Resource Conflict

Hello,
My x86 PC has:
- Elitegroup K7S5A mainboard
- AMD Athlon K7 XP 2400+ Socket A thoroughbred CPU
- AmiBIOS
- 256 MB SDRAM
- 2 Hard Disks with 40 GB each
When I start Solaris 8 installation with the installation CD, the following is displayed in the screen "Bus Enumeration":
Determining bus types and gathering hardware configuration data ...
Warning: Resource Conflict - both devices are added
NON-ACPI device: ISY0050
Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2
ACPI device: ISY0050
Port: 3F2-3F3, 3F4-3F5; 3F7; IRQ: 6; DMA: 2
Next screen with "Bus Enumeration" shows:
Warning: Resource Conflict - both devices are added
NON-ACPI device: CSC0001
Port: 200-207
ACPI device: CSC0001
Port: 201-208
Next screen "Scanning Devices" works o.k.
Then the boot starts in line modus and shows the following:
error: Configuration error - missing controller?
The root file system is not mounted and the configuration assistant has exited prematurely. Booting is unlikely to succeed.
Shortly later boot stops.
Please, can anybody tell me what the root of the error is? Is there something to be configured in the BIOS?
Thank you very much in advance!
Thomas

Continuing installation of my Solaris 8 x86 after a long break.
As mentioned above, the installation works now with the patched ata.bef. The installation seems to work o.k. After completion of the installation, I boot to the second hard disk where my Solaris 8 x86 installation is located. Solaris boot manager appears, Solaris boot process begins but shortly after, it stops with the following message:
error: Configuration error - missing controller?
The root filesystem is not mounted and the configuration assistant has exited prematurely. Booting is unlikely to succeed. CRL-ALT-DEL may be used to reset the machine.
Failover to boot interpreter - type ctrl-d to resume boot
Pressing ctrl-d leads to
boot: source: open of '/etc/bootrc' failed
My configuration as mentioned at the beginning of the thread did not change in the meantime. Is there any idea what is wrong?
Thanks in advance!
Thomas

Similar Messages

Resource Conflict Warning (ACPI/NON-ACPI devices) while installing solaris

Hi,
I am trying to install Solaris 8 on my system.
Intel Celeron 1.7 Ghz
128 MB RAM
Gigabyte 8LD 533K Motherboard with Intel Chipset.
While installing, the second installation screen titled "Bus
Enumeration" gives the following warning.
Warning: Resource Conflict:
ACPI Device: PNP0C01.
Memory: (about 5 to 6 memory addresses in hexadecimal form are shown)
NON-ACPI Device: PNP0C01.
Memory: (about 5 to 6 memory addresses in hexadecimal form are shown,
which are different from the ones shown under the ACPI device list)
I ignored the message and pressed F2 key as suggested.
The next screen "Solaris Boot" comes and after choosing the CD (as
the target from which the OS is to be installed), The next screen
comes up asking me to chose the type of installation 1) Solaris
Interactive and 2) Jumpstart. No matter which option I choose, the
system shows 2-3 messages, and even before I can read them, the
system reboots. Thus I am unable to install Solaris.
I searched on Google and as one person had suggested tried tweaking
the BIOS. (Disable APM etc). But it did not work, because I don't
have an option that specifically gives the Disable/Enable option for
APM. I get the Advanced Power Management screen, but it shows some
different options.
I spoke about this problem with a friend who has some experience on
Solaris and he put the CD Drive and the Hard Disk on two different
buses, but it didn't help. I still get the same message.
I would be very grateful if someone could suggest a method so I can
install Solaris.
Regards,
pmu

The next screen comes up asking me to chose the type of installation 1) Solaris
Interactive and 2) Jumpstart. At this screen, type
b kadb -v
instead of choosing 1) or 2). Now you should be able to read the error messages from the kernel that
prevent booting into Solaris.

Resource Conflict on Solaris 8 Intel Edition

Installing Solaris 8 on a Compaq Presario getting a resource conflict: Non-ACPI device: PNP0C01 MEmory:20000000-203FFFFF, FFEE0000-FFEFFFFF, FFFE0000-FFFFFFF ACPI device: PNP0C01 Memory: CA000-CBFFF, 13BF0000-13BFFFFF, FFFF0000-FFFFFFF, 9E800-FFFF, 40F0000-13BEFFFF, FFEF0000-FFEFFFFF. Install finishes device scan and hangs after selecting installation options. How do I get around this resource conflict which I think causes the install to hang?

hi
I have got same problem .....but ignore the problem ...it should be fine.
Reply me if you find any other useful information .
Thanks

Warnig: Resource Conflict - both devices are added

What is the solution for this:
Warnig: Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
memory: 9FC00-9FFFF, 7EE0000-7EF7FFF, 7EF8000-7EFFFFF, 7EC0000-7EDFFFF, FFF00000-FFFFFFFF
ACPI device: PNP0C01
memory: 9FC00-9FFFF, E0000-EFFFF,40FFC00-7EFFFFF

I got the same message every time I installed Solaris 8 yet it didn't hinder the installation nor the OS to run. But I am interested in some in-depth-info if somebody knows about.
regards, E. Sanio

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
 at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
 at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
 at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
 at oracle.net.ca.InitialSetup.<init>(Unknown Source)
 at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000 /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000 /lib/libthread.so.1
0xfefd0000 /lib/libdl.so.1
0xfeed0000 /lib/libc.so.1
0xfea00000 /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000 /usr/lib/libCrun.so.1
0xfee50000 /lib/libsocket.so.1
0xfedc0000 /lib/libnsl.so.1
0xfeda0000 /lib/libm.so.1
0xfeeb0000 /usr/lib/libsched.so.1
0xfe9a0000 /lib/libm.so.2
0xfed50000 /lib/libscf.so.1
0xfe980000 /lib/libdoor.so.1
0xfe960000 /lib/libuutil.so.1
0xfe940000 /lib/libmd5.so.1
0xfe920000 /lib/libmp.so.2
0xfe8e0000 /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000 /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000 /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000 /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000 /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000 /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000 /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000 /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000 /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000 /usr/dt/lib/libXm.so.4
0xf0cf0000 /usr/openwin/lib/libXt.so.4
0xf0cc0000 /usr/openwin/lib/libXext.so.0
0xf1890000 /usr/openwin/lib/libXtst.so.1
0xf0c30000 /usr/openwin/lib/libX11.so.4
0xf0be0000 /usr/openwin/lib/libdps.so.5
0xf0a90000 /usr/openwin/lib/libSM.so.6
0xf0a70000 /usr/openwin/lib/libICE.so.6
0xf0a30000 /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000 /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000 /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000 /lib/libkstat.so.1
0xefc40000 /lib/libgen.so.1
0xefc20000 /lib/librt.so.1
0xefbf0000 /lib/libaio.so.1
0xefbd0000 /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1 localhost.localdomain localhost
#192.168.100.1 bt.lan.home bt
#192.168.100.5 jacek.lan.home jacek
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

How to upgrade oracle 32 to 64 bit on sun solaris x86 64 bit OS?

Hi,
I want to upgrade/convert 32 bit Oracle Database 10.2.0.2 to 64 bit database. Existing 32 bit database is RAC and it is running on Sun Solaris X86 64 bit OS.
First, I want to know is it possible?
If yes, then what are the exact steps?

Hi,
Such a migration can be done, just follow the steps in Metalink note 62290.1
It is important to remember that 64-bit database requires more shared pool memory so you should increase your shared pool size.
Liron Amitzi
Senior DBA consultant
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Edited by: Liron Amitzi on Jul 1, 2009 3:08 PM

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

How to integrate Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

From 7.3 on NT to 8 on Solaris x86?

Has Oracle ported Oracle8 for Solaris x86?

Hi,
usually I expect people to do a little research and I do not give everything chewed.
Point 4:
go to the
Oracle9i Database Migration Release 2 (9.2)
go to the chapter 3
Upgrading a Database to the New Oracle9i Release
go to the point:
Upgrade the Database Manually
Exactly from here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
Keep in mind
1) that the EXACT procedure you are following it is not indicated in this manual
2) you have to think a little ( do you have all the windows services created on the destination system? if not, you have to create them ... )
3) this procedure is not supported by SAP. It is a valid option but not supported by them. You have to practice until you get all the points correctly

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Resource conflict- pci network controller in slot 09

hi there!
im looking for help with this problem which ive had for teh last 3 months.
basically one day, when i turned my laptop on it didnt log straigh into windows, it came to a screen that said
'resource conflict - pci network controller in slot 09'
press f1 to resume , f2 to enter setup, f1 would take me to windows and f2 to bios.
after this my wireless card dint work, so i ended up buying an external one which i used. now i decided to format thinking it would help the situation, but no luck. ive looked around on the net asked alot of friends but no one seems to be able toi give me a solution. is there anybody who could tell me what to do?
thanks
lefteris

I have the same problem im my lap (ThinkPad R50e) and i perform the following steps to resolve
F1 --> Config --> Network --> Disable --> F10
then repeat the same steps but enable network
F1 --> Config --> Network --> Enable --> F10
it working fine with me

Help with evaluation for Solaris x86

Hello,
I would like to evaluate Oracle Identity Manager and Access Manager products at the latest version possible -- the host system(s) are Solaris x86 (SunOS .5.10) Unfortunately, I am having a bit of trouble compiling the list of packages/versions to achieve this for this platform. For instance, on the downloads page it appears that OIM is not available for Solaris x86, not even in older versions(?)
Thank you in advance,
Scott

Hi Scott,
I'm pretty sure that x86 Solaris is not yet certified to run the Identity Management suite. I've been involved in an evaluation process and we ran it all on RedHat Enterprise Server Release 4 Update 5, without too many problems.
cheers,
James

Solaris 8 x86: Resource Conflict

Similar Messages

Maybe you are looking for