Solaris exam form (Oracle Solaris 10 System Administrator Certified Professional Exam)

Hello,
In comming days I'm going to try above Solaris 10 exam. Have some questions regarding form of exam (I couldn't find it on Oracle website):
1. Is it multiple choice test with indication in each question how many answers are correct?
2. Is it possible to switch questions during exam and get back later to ones which I'm not sure?
3. Are the results given just after or later 
regards
pete

2698137 wrote:
As you see in the section header there's word Network Printers. However in description below there's nothing about printers. There some more examples. Should I also be prepared for questions about printers?
thanks in advance!
pete
In the days of the Sun when even an ultrasparc 2 could run solaris 10 and some brainless clot still allowed access to the obp updates there were exams cx-310-201 and cx-310-202.
In fact yours truly got 100% for his "manage network printers and systems processes" despite in practice my setup for printers in Glasgow coming out in Galashields.  In some ways I was quite good at printers.  
Then around the exam had a update for S10u5 when the old ZFS and zones etc started to get really going.
( I completed the cx-310-202 under that update).
Refering to Calkins ISBN-13: 978-0-7897-3790-8 for the section he considers as "Managing System processes" there is no mention of printers.
HOWEVER there was a whole section on managing the lp printer service in that book in the very next chapter!
But we are talking history here .... and the exam may have been through further updates ... indeed the current exam is validated against s10u11 (which is about 2/3 years old I would guess without looking it up).
So printing may well have been dropped.  Any other topics may have had to be tweaked.
It's obviously best you know about printing ..... but quite frankly its somewhat rate nowadays.  It can also be a but of a minefield as its been through changes with the releases.  It's quite possible it's dropped from the exam altogether.
You have 2 reasonable choices:-
- Study all you can about printers at s10u11.  (Go over what the online documentation says for s10u11).  I'm sure some of this stuff changed throughout the life of Solaris 10.  It shouldn't be more than one or two questions so don't spend too much time on it.
- Raise an SR at  Oracle University - Support Form   ... Question the discrepancy on the title versus the underlying topics.  ( .. there isn't a category for this .... exam results/score report might be best) questioning the discrepancy in the topics.  Put the SR number back on this thread as if Brandye is happening to pass she might pick it up).
... I can't be sure of anything I have said here.  I may end up confusing rather than helping over Matthew's earlier reply.

Similar Messages

  • R12 Applications Database Administrator Certified Professional. (1Z0-238)

    Hi everyone
    I am OCP and would like to get Oracle E-Business Suite R12 Applications Database Administrator Certified Professional. I need to take test (1Z0-238). I cannot take a class since I travel all the time. Does anyone know of a good book?
    Thanks

    Hi,
    I do not think there is any book available in the market that covers the topics of this exam/certification. However, I would suggest the following references/links, it should be helpful.
    Oracle Applications DBA - Covers 11i and R12
    http://www.amazon.com/Oracle-Applications-DBA-Covers-11i/dp/0070077290
    Applications Releases 11i and 12
    http://www.oracle.com/technology/documentation/applications.html
    Oracle E-Business Suite R12 Applications Database Administrator Certified Professional
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=210
    E-business suite book recommendations
    E-business suite book recommendations
    Regards,
    Hussein

  • Passed 310-200 (OCP Solaris 10 System Administration, Part I) Exam!!!

    Hello Everybody,
    Let's share our exam experience and knowledge in this thread.
    Thank you a lot!

    NOTHING is allowed, you can come back and refer to ZIP.
    I believe, anyway.
    I can also share my thoughts of my first Solaris exam. The lighting was good, the chair was comfortable and I picked locker No.5 outside of the exam room for all of my valuables (remember, you're allowed to take nothing with you .... not even a pen!) on the basis that this used to be my football shirt number and I thought it would bring me luck.
    I also had a great view of the Berkshire countryside as it was a lovely, sunny day.

  • Oracle Enterprise Linux: System Administration certification

    I want to prepare for this certification, Can someone has notes/Documents for this....
    http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D49366GC10

    I need Book/Documents for Oracle Enterprise Linux: Linux Fundamentals
    also
    http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D49366GC10

  • System Administrator Responsibility

    Hi hussein/helios,
    As an Apps Dba, I guess the most used responsibilty you choose in Oracle Apps is System Administrator.
    What other responsibility does an Apps DBA be of interest in, aside from it?
    Thanks a lot
    MsK

    Hi Msk;
    As an Apps Dba, I guess the most used responsibilty you choose in Oracle Apps is System Administrator.
    What other responsibility does an Apps DBA be of interest in, aside from it?As you mention in my company we use mostly System Administrator but many times in day we are using System Administration or some others too. It depends what you get request from client side(problem,request etc) so you can choose reponsibility via this request.For instance you can choose Workflow if you are doing something related wiht it.
    By the way i suggest check Hussein Sawwan greatest post about similar topic:
    apps dba utilities
    apps dba utilities
    DBA and APPS DBA Activities
    Re: DBA and APPS DBA Activities
    oracle apps dba documentations
    oracle apps dba documentations
    Hope it helps
    Regard
    Helios

  • Beta Testing Begins for New "Oracle Linux 5 and 6 System Administrator" (OCA) Certification Exam (1Z1-100)

    Oracle Certification begins beta testing this week for the new upcoming certification - Oracle Certified Associate, Oracle Linux 5 and 6 System Administrator. READ MORE

    We do have things in the works but cannot be announced prematurely. We'll put the word out on the [Oracle Certification Blog|http://blogs.oracle.com/certification/] as soon as possible.
    Cheers,
    - Harold

  • About Solaris Operating System Platform for E-Business Suite 11.5.10.2

    Hello All,
    I have installed Solaris Operating System 10 (x86) on Sun Server V40z which has AMD processor.
    I have media pack of Oracle E-Business Suite 11.5.10.2 for Solaris Operating System (SPARC).
    Q. 1 ) is above media pack will work on my sever?
    I was checking this on http://edelivery.oracle.com
    but I am not able to find Platform Solaris Operating System (x86) for E-Business Suite 11.5.10.2
    Why it is not available ?
    Regards
    Chirag Patel
    Nairobi

    Q. 1 ) is above media pack will work on my sever?No.
    I was checking this on http://edelivery.oracle.com
    but I am not able to find Platform Solaris Operating
    System (x86) for E-Business Suite 11.5.10.2
    Why it is not available ?Because it is not certified.
    Certify - Oracle's Certification Matrices
    http://www.oracle.com/technology/support/metalink/index.html

  • Oracle 11i System Administrator Certification

    Hi,
    Please advice which book or pdf doc would be appropriate for "Oracle 11i System Administrator Certification"?
    Please also advice if any question bank for practice.
    ANy experience sharing would be great.
    Thanks

    Both Transcender and SelfTestSoftware are the official and authorized providers of certification practice exams. If you could not find any practice material in their websites you can use "Oracle 11i System Administrator Fundamentals for 11i10 Self Study CD Course (Netg Oracle)" as an alternative. Self-Study CD-ROMs are an excellent tool to help you prepare for your exam. SSCDs reinforce the course material and allow you to focus on sections that you need to review. Note: the SSCDs do not count towards your course requirements for certification and should be used as a study aid only.
    Oracle 11i System Administrator Fundamentals for 11i10 Self Study CD Course (Netg Oracle)
    http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D42141

  • How to install Oracle FM Forms 11g on client system.

    Problem 1.
    I have an weblogic server installed on a server, now i have to install oracle Forms 11g in client system. its ask me weblogic server path whatever i try, its ask weblogic on client. what is the solution how installation of Oracle 11g form connect with weblogic server."
    Problem 2.
    i have install 64-bit OS windows 7.
    1. I Installed JDK 6 (64bit).
    2. Installed Weblogic Server. (its work fine)
    3. Now i m installing Oracle forms 11g 64(-bit). its show me an error (INST-07407: Unable to detect machine platform or JVM bits)
    please help me out. waiting for your positive reply.

    3. Now i m installing Oracle forms 11g 64(-bit). its show me an error (INST-07407: Unable to detect machine platform or JVM bits)It looks like you are installing the 32-bit version of Oracle Fusion Middleware (FMw) 11g - not the 64-bit version. As a test, install the 32-bit JRE and run the FMw installer again. If it continues past this point - you've got the 32-bit installer and not the 64-bit installer. :)
    Craig...

  • Ldap client with directory server 6.0 on solaris 9 systems

    I have a directory server 6.0 running on a solaris 9 system. I have set up idsconfig, vlvindex and certificate database on the server side. The client ldap I am trying to set up is also solaris 9 system. I have set the certificate database on this ldap client using the Resource Kit certutil and import the server certificate to client certificate database. It seems the TLS secure connection did work between LDAP server and client. (I use the Resource Kit ldapsearch command to test it) I use 'ldapclient -v init ...' command using 'profileName=tlsprofile' to initialize the LDAP client and the information returned from that command said LDAP client configed sucsessfully. But when I run ldapaddent command to import /etc/passwd. I got error:
    Passwd container does not exist.
    The ldapaddent command I ran like this:
    ldapaddent -v -f <passwd file> -D "cn=Directory Manager" passwd
    Then I tried to use 'ldapclient -v manual ....' command to set up LDAP client. That command finishes succefully. But I still can not import /etc/passwd using ldapaddent with same error.
    What is wrong with my set-up?
    Thanks,
    --xinhuan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    I looked into the /var/adm/messages, and I have the following error:
    ldap_cachemgr[1640]: [ID 605618 daemon.error] libldap: CERT_VerifyCertName: cert server name 'directory server' does not match 'hostname.mycompany.com': SSL connection denied
    It seems I have problem with SSL certificate set-up. I did generate the server side 'hostname.mycompany.com' certificate then use the Resource Kit certutil import that certificate to the client side. Is that right way to do?
    Thanks,
    --xinhuan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Patch Solaris 8 systems

    Hi
    Is there anyone that has successfully been able to patch Solaris 8 systems using this tool? If you have a guide I would be happy. I have tried a couple of times but failed even though I have installed required patches.
    Regards Jerry

    Does anything show up in the agent logs directory? You may have missing packages, such as SUNWbash, SUNWswmt, and SUNWgzip which are often missing on Solaris 8 systems.
    If you are unable to find anything in the logs then I would advise opening a support case. Note that it is likely that we will ask you to collect information from the system using the [GDD script|http://www.sun.com/bigadmin/scripts/sunScripts/SUN-GDD_sun-connection-collect_noarch.tar.gz] . It would be worthwhile if you could collect the information whilst attempting to run a job against the system.
    Run the script on the agent:
    # ./SUN-GDD_SunConnection.sh -debugAgent -auto 1800 -o /var/tmpThis will enable debug-level logging on the agent and automatically collect the logs after 30 minutes - you may wish to adjust the time to suit.

  • Need Documents/Materials on Oracle 11i system administrator

    Dear all,
    Oracle System administrator was just added to my role. I'm very new to this role with no little knowledge. Can anybody in the house help me out please.
    Thank you.

    All Oracle EBS documentation can be found at http://www.oracle.com/technology/documentation/applications.html
    HTH
    Srini

  • OIM Process Form System Administrator Permissions Disappeared

    Hi,
    We have OIM 9.1.0.2 in our environment. Since past few days we are noticing that 'System Administrator' permission from process form gets removed completely. We cant even add the permission for System Admin as it gives as error that 'You do not have permission'.
    Finally we have to import our back up xml (thank God that we took backup) to import the permission back.
    Anybody has seen this issue before. Please help as this is becoming a major problem for us.
    Regards
    Rahul

    Hi,
    We have OIM 9.1.0.2 in our environment. Since past few days we are noticing that 'System Administrator' permission from process form gets removed completely. We cant even add the permission for System Admin as it gives as error that 'You do not have permission'.
    Finally we have to import our back up xml (thank God that we took backup) to import the permission back.
    Anybody has seen this issue before. Please help as this is becoming a major problem for us.
    Regards
    Rahul

  • Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

    Dear Techies,
    We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
    1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
    2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
    System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
    Kindly share some ideas  to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
    Thanks and Regards
    Dileep Kumar.

    Hi Mahesh,
    Thanks for reply.
    I have gone through the link that you have suggested. But our EIT user hook validations doesn't  have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
    Thanks and Regards
    Dileep Kumar.

  • Verify LUN ID's on Solaris 9 System

    Hi Experts,
    SAN Team just added LUN's to a Solaris 9 system. How can I verify that LUN's are added? Where can I find the LUN ID's?
    Let me know if you need more information.
    Sunil.

    luxadm probe - will all the fabric disk details
    Note: If this is the first time lun is being provisioned to the said server, then there could be additional configuration required on the server side specific to your SAN environment.

Maybe you are looking for

  • Create table statement in Dynamic SQL

    Hello, I am trying to create a table as a select query through a PL/SQL block using dynamic SQL. Following is the query, declare stmt varchar2(2000); begin stmt := '''CREATE TABLE output AS SELECT PATIENT_ID, FIRST_NAME FROM employee'''; execute imme

  • MB26 How can I avoid the Manual selection of stocks?

    Dear experts When I use Stock Determination function in MB26 (picking list) the systems (obviously) uses our stock determination rules to determine which stocks to pick. However, when it fails to automatically locate the required stock , it brings th

  • File name of region

    If I have a puzzle of pieces of real recordings scattered over my timeline - how can I know the filename of a certain snippet in my Media folder? That can be useful sometimes, e.g. if you want to edit it using an audio editor, or if you want to re-bu

  • Configure P6 V7 on Windows 7 professional 32-bit,

    HI, I need to configure P6 V7 on Windows 7 professional 32-bit, I already installed client and oracle client 10g, but it is giving me an error "Bad public user name or password. Database Server Error: ORA-12154: TNS:could not resolve the connect iden

  • Missing AVI Codec in QuickTime

    Hello: I am trying to convert some old home videos from AVI to MOV so that they can play on AppleTV.  The videos play fine in VLC Media Player on OSX, but I can't get them to open in QuickTime for export to MOV.  I get the well known "A Required Code