Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Hi all,
I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box:
Installation of these packages generated errors: SUNWiiimr
Installation of these packages generated warnings: SUNWcnetr
The zone creation log shows:
*** package -SUNWiiimr- failed to install with fatal errors:
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postin stall: /export/zones/newzone/root/lib/postrun: not found
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postinstall: /export/zones/newzone/root/lib/postrun: not found
pkgadd: ERROR: postinstall script did not complete successfully
Installation of -SUNWiiimr- on zone -newzone- failed.
*** package -SUNWcnetr- installed with warnings:
pkgadd: ERROR: unable to create package object -/export/zones/newzone/root/etc/dladm-.
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/aggregation.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/linkprop.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/secobj.conf- failed
owner name -dladm- not found in passwd table(s)
Installation of -SUNWcnetr- on zone -newzone- partially failed.
-newzone- was configured to be a whole root zone. Are there any ways to solve these installation errors?
Thanks in advance.

This problem seems some strange - this time with Solaris 10u4, from 10 containers installed on a brand new X2200 (2x cpu) only one do not output those errors, but just this one cannot install the dsee or proxy. This time the errors were from:
Installation of <SUNWxwplr> on zone <dsee-proxy> partially failed.
Installation of <SUNWdtdmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWmconr> on zone <dsee-proxy> partially failed.
Installation of <SUNWrmwbr> on zone <dsee-proxy> partially failed.
Installation of <SUNWlvmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWzebrar> on zone <dsee-proxy> partially failed.
So the machine was, too, just installed. After several hours, anoter atempt to install a zone, this time just this one, returned no errors - and the dsee installed without any complains. All configurations were for whole root zones. Used was Solaris 10u4 with the most recent patch cluster applied.

Similar Messages

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

App Install error with iTunes 7.7 (Facebook and MySpace Apps)

Whenever I try to sync either the Facebook or MySpace apps from the App Store, I receive the following error:
The application "Facebook" was not installed on the iPhone "Ray's iPhone" because an unknown error occurred (0xE8000013).
and
The application "MySpace" was not installed on the iPhone "Ray's iPhone" because an unknown error occurred (0xE8000013).
I've tried deleting and redownloading the apps multiple times. Anyone else had this problem or gotten around it?
Thanks - Ray

I downloaded a few free apps also and it didn't take. When I tried downloading it again it said that it's already downloaded and I have to sync the phone up with iTunes and click Store -> Check for purchases.
Well I did that, but the Store is still down so it didn't sync it with the phone. I'll keep trying.

SQL Server Express 2014 Installation Completes with Failures and Repair Does Nothing to Help

I am attempting to install SQL Server Express 2014 on a development machine and as usual old versions of SQL and the remnants of them are a plague to the installation.
I have used to Revo Uninstaller to scrub the old installations and with my first attempt after some additional work on the registry I was able to get an instance to install and remarkably I was able to connect to the instance. However, I removed an application
reference to SQL Server 2008 after the SQL Express 2014 installation (through Control Panel > Programs > Programs and Features) and it stopped working immediately.
So I removed (uninstalled using Revo Uninstaller) every reference to any SQL Server application as well as removed all of the registry references (using Revo) and I can now install SQL Server Express 2014 with
"Feature" failures [Reporting Services, Database Engine Services, Full-Text and Semantic Extractions for Search and SQL
Server Replication] and of course it doesn't work.
Now when I attempt "Repair" the installation the process ends normally (no errors) and reports "Success" however SQL still has no instance and the services are not running nor are they visible when I open the "SQL Server Configuration
Manager".
This is the "Repair" log:
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-12-21 17:21:37
End time: 2014-12-21 17:29:10
Requested action: Repair
Machine Properties:
Machine name: EDWARD-PC2
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2014 Management Tools - Basic 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Edward\Downloads\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition:
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\SystemConfigurationCheck_Report.htm
However this is what the "SQL Sever Configuration Manager" look like:
Why does this appear to not be working properly? I can not connect the the "local" instance and I would guess that the service either does not exist or is not running.
Edward Walker

Hello,
To my knowledge, Revo is not a supported way to uninstall SQL Server.
Please try to uninstall all you can using Control Panel -> Programs and Features, then perform a manual uninstall to
remove remnants. Try the following procedure:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
After performing above procedure, try to reinstall SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Install error on CC and ERROR code 50. Also AE would crash due to full disk cache and close unable to select from menu to change.

I have recently installed and used Creative Cloud and also install several applications. The apps and cc ran fine but Adobe AE would crash upon startup of the app in which is prompted a message stating ...the drive which it is installed on does not have enough memory or disk cache is full. Please change in preferences. I attempt to do so but AE shuts down after I select ok. I installed the cleaner tool and uninstalled all Adobe products and attempted to reinstall creative cloud and now I get a "...We've encountered the following issues: Creative Cloud desktop failed to install. (Error code:50)
I have been trying to resolve this issue for three weeks now which I did finally get it to work by opening the AE by selecting a AE file. I was able to use it 3 times for the amount charged for the monthly fee and I also downloaded several of the other apps but was
unable to use them due to this issue then uninstalled with Adobe cleaner tool!
PLEASE HELP!
Message was edited by: Paul Whitehurst

Jeff,
I have tried to install on another drive after downloading Creative Cloud clean-up and uninstalled all adobe creative cloud. So if I erase my temp folders it might work?
Please help I have basically paid for my 2nd month and only used a few times.
Thanks,
Paul

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

Listener error with dg4odbc and mysql

Hi all,
First of all, sorry for my English, I'm learning :-)
I'm trying to create a dblink from oracle to mysql, but for now this seems impossible. I have read lots of manuals and post, but no way. I can connect to remote mysql server with "isql my_portal", so, unixodbc and the mysql driver for odbc are working in the server.
The oracle database 10.2 is installed in a Red Hat 64 bits server. Due to hsodbc for 10.2 is only for 32bit i installed the gateway version for 11g without problems (no errors showed, so...) But I have always the same error: "TNS-12541: TNS:no listener dg4odbc" But my configuration seems correct. Can anyone find the error in my config? Thank you
This is the documentation that I have used:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=561033.1
After apply the modifications to the configuration files, this is what lsnrcntl start says:
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/liste ner.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/srv-bbdd1/listener/alert/lo g.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=1.0.2.42)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cl-oracle.jferrer.es)(PO RT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 16-MAR-2011 10:54:38
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/list ener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/srv-bbdd1/listener/alert/ log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=1.0.2.42)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLServerA3" has 1 instance(s).
Instance "SQLServerA3", status UNKNOWN, has 1 handler(s) for this service...
Service "dbjde" has 1 instance(s).
Instance "dbjde", status UNKNOWN, has 1 handler(s) for this service...
Service "my_portal" has 1 instance(s).
Instance "my_portal", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Then I try tnsping to my_portal:
tnsping:
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 16-MAR-2011 11:36:45
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = my_portal)) (HS=OK))
TNS-12541: TNS:no listener
Some information:
- unixodbc driver is in /usr/lib64 (libodbc.so)
- mysql for odbc driver is in /usr/lib64 (libmyodbc.so)
This is my odbc.ini (/etc/odbc.ini):
[ODBC Data Sources]
odbcname = my_portal
[my_portal]
Description = my_portal
Driver = MySQL
SERVER = 1.0.2.98
PORT = 3306
USER = root
PASSWORD = desarrollo
Database = portal_clientes
[MySQL]
Description=ODBC for MySQL
Driver=/usr/lib64/libmyodbc.so
Setup=/usr/lib64/libodbcmyS.so
Added to listener.ora
(SID_DESC =
(SID_NAME = my_portal)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = dg4odbc)
(ENVS = LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.0/db_1/hs/lib:/u01/app/oracle/product/10.2.0/db_1/lib:/usr/lib64)
Added to tnsnames.ora
my_portal =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = localhost)
(PORT = 1521)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = my_portal))
(HS=OK))
initmy_portal.ora
HS_FDS_CONNECT_INFO=my_portal
HS_FDS_SHAREABLE_NAME=/usr/lib64/libodbc.so
HS_FDS_TRACE_LEVEL=ON
UseCursorLib=0
set ODBCINI=/etc/odbc.ini

Thank you for the response. The problem was the solved when change the 1.2.0.40 to 42 :-)
Another issue I saw is your ORACLE_HOME - did you install DG4ODBC in your 10.2 OH?Yes, the documentation said that is certified to work with Oracle 10.2.0.4 that is our version, is this a problem? (¿...?) I had no problem to install dg4odbc with the universal installer.
But I have another problems now. I can't remember the exact error, but my first problem was solved adding this line to initmy_portal.ora:
HS_FDS_QUOTE_IDENTIFIER="'"
Now, when I try to make a select oracle returns this:
ORA-00942: la tabla o vista no existe
[MySQL][ODBC 3.51 Driver][mysqld-5.1.41-3ubuntu12.10]Table 'portal_clientes.CLIENTES' doesn't exist {42S02,NativeErr = 1146}[MySQL][ODBC 3.51 Driver][mysqld-5.1.41-3ubuntu12.10]Table 'portal_clientes.CLIENTES' doesn't exist {42S02,NativeErr = 1146}
ORA-02063: 2 lines precediendo a MY_PORTAL_DBLINK
The table exists, I'm sure, and if I change the query to other tables the result is the same: the table doesn't exist. Any idea?
Thank you for the help

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Install error with Photoshop CS6

I am trying to install the trial version of Photoshop cs6. I have attempted the install three times now and if keeps finishing with the same message, "Some items for the following product(s) could not be installed successfully."
The programs does not run correctly, for example a 3d object that I use in cs4 works perfect, in cs6 it places transparent areas that do not exist.
What did not get installed and is it causing the trial version to fail to run properly?

This is what it says:
DW050: The following payload errors were found during install:
DW050: - Adobe Bridge CS6 (64 Bit): Install failed
DW050: - Adobe Player for Embedding 3.3: Install failed
DW050: - Adobe CSXS Infrastructure CS6: Install failed
DW050: - Adobe WinSoft Linguistics Plugin CS6 x64: Install failed
DW050: - Adobe Extension Manager CS6: Install failed
DW050: - Adobe Player for Embedding x64 3.3: Install failed
DW050: - Adobe WinSoft Linguistics Plugin CS6: Install failed
DW050: - Adobe Bridge CS6: Install failed
DW050: - Adobe Linguistics CS6 x64: Install failed
DW050: - DynamiclinkSupport: Install failed
DW050: - Adobe ExtendScript Toolkit CS6: Install failed
[ 6436] Tue Aug 21 16:53:36 2012 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 942284 milliseconds (942.284 seconds) DTR = 1786.11 KBPS (1.74425 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 25 error(s), 0 warning(s)
----------- Payload: {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\APE\3.3\adbeapeengine.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 4)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 4)
----------- Payload: {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\APE\3.3\adbeapecore.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
----------- Payload: {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\boost_date_time.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1)
----------- Payload: {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\CS6ServiceManager\adobe_caps.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1)
----------- Payload: {94FEA41F-7345-429F-AA31-5C615F24CE29} Adobe WinSoft Linguistics Plugin CS6 1.3.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\Linguistics\6.0\Providers\Plugins2\WRLiloPlugin1.3\\CNSWin_MacEnc.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 3)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 3)
----------- Payload: {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Plugins2\WRLiloPlugin1.3\\MORPHLibs.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 13)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 13)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Linguistics\6.0\UserDictionaryMigrationTool\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 453)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 453)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Bridge CS6 (64 Bit): Install failed
ERROR: DW050: - Adobe Player for Embedding 3.3: Install failed
ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS6 x64: Install failed
ERROR: DW050: - Adobe Extension Manager CS6: Install failed
ERROR: DW050: - Adobe Player for Embedding x64 3.3: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS6: Install failed
ERROR: DW050: - Adobe Bridge CS6: Install failed
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
ERROR: DW050: - DynamiclinkSupport: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS6: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 6436] Tue Aug 21 16:53:37 2012 INFO
Exit Code: 6 - Silent workflow completed with errors.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF024, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
From what I can tell from the start menu they do show all of these being installed with short cuts on the start menu.

Itunes install error codes 2503 and 2502

I have purchased a new PC for Windows and cannot install Itunes. I am getting error codes 2503 and 2502. My music is in the Music / itunes file.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Shared technologies install error with PSE9

I'm having trouble installing PSE 9, it continues to fail the install at the Shared technologies install.
I've already been through the other discusson threads on the forum to see if they could help with the install, so I've turned off AV and Firewall, killed any related Adobe processes, updated AIR to 2.7.1 and set the extract/install point to C:\PSE9 and I'm still failing at the same point.
Having reviewed the log file the Error's are:
- 0 fatal error(s), 5 error(s), 3 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Elements Camera Raw: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - ElementsSTIInstaller: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
The log file references a cache issue.
I've also run Adobe Support Advisor and that wasn't able to help me and effectively sent me here with the following support code: 00-81862-051703092011
Anyone have any ideas of where to go from here?
Any help gratefully received.
Simon

Try this tech note for a solution:
http://kb2.adobe.com/cps/858/cpsid_85843.html#main_Error__Below_mentioned_applications_hav e_failed_to_install__Shared_technologies_

Constant & erratic "Page Load Error" with Safari and Firefox

A week or two ago, I started getting constant "Page Load Errors" ('this page cannot be found', etc) when browsing with either Safari or Firefox. These are not dead sites that time out, but are very live (and cannot be summoned no matter how many times refresh)!
Something is wrong on my computer's end: I have strong wireless, have tried connecting with ethernet, and have used a different network. All of these produce the same result, where about half of the sites I try to connect to are instantly declared as dead by any browser I use.
I am not using any firewall, and have emptied both browser's caches.
Any ideas would be greatly appreciated.
Thanks!
Cliff

I'm having the same problem. It only happens at home over my DSL connection. Here is what I have tried and the results.
This really started bothering me since I upgraded to a recent Macbook Pro. I tried my original MBP with Leopard and found it doing the same thing. I ended up testing from my G4 and it works fine. The problem occurs over wireless and wired. I tried changing my MTU size with no change. I thought it was DNS but changed to other DNS and it didn't make a difference. Happens in Safari and Firefox. I am thinking it has an effect on iTune store also. The problem goes away when I VPN in to work, comes back when I close the VPN.
Just tonight I installed an clean 10.5 Leopard on my original MBP. Safari works perfectly. Instead of updating to 10.5.6, I download the 10.5.5 update. After updating the problem reappeared.
Again, my G4 with latest Tiger update work fine and both Macbook Pros with the latest Leopard have a problem over my DLS connection. They work perfectly fine at work and other locations.
Ted

Error with calculations and printing output

Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. It gives me an error with rentalCost when it goes to printout the value, does not seem calculate the values, and does not print any of the things I call for at the end. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
import java.util.Scanner;
public class Test
     public static void main (String [] args)
          String season, cabinGrade;
          double rentalCost, days, finalCost;
          Scanner input = new Scanner(System.in);
          System.out.print("What season will you be staying during? ");
          season = input.nextLine();
          System.out.print("What kind of cabin? ");
          cabinGrade = input.nextLine();
          System.out.print("How many days are you staying? ");
          days = input.nextDouble();
          input.close();
          if (season == "pre-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .9) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .9) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .75) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days < 7))
               rentalCost = ((days * 100) * .85) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .85) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days < 7))
                    rentalCost = ((days * 100) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .75) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days < 7))
               rentalCost = (days * 55) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = (300 + (days * 55)) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days < 7))
               rentalCost = (days * 100) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days >= 7))
               { days = days - 7;
                 rentalCost = (600 + (days * 100)) * 1.0925;
          System.out.println("Season : " + season);
          System.out.println("Cabin grade: " + cabinGrade);
          System.out.println("No. of days: " + days);
          System.out.println("Rental cost: " + rentalCost);
}

Lgndryhr wrote:
Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
At the very least you need to tell us what you expected this code to do and what it actually did...

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Similar Messages

Maybe you are looking for