Solaris Managment console in Java desktop release 3

Hi Experts,
I have recently installed Solaris 10/8 on a x86 based system.When I try to login to the server through CDE it gives a message "CDE has been deprecated and will be removed in future release of Solaris. Please move to the Java Desktop System (aka JDS)"
If I login using JDS I am unable to see Solaris Managment console. Is there any new console that is been used in the JDS or we have to do the managment manually?
Revert back if you have any questions.
Regards,
Sunil.

How I've always done it is open up a shell and just type SMC that always seems to work for me, even in the days when I was using cde I would do the same.
I guess, that for me, an X session was just a way to have a lot of terminal windows open, but that's just me :)
~Ivy

Similar Messages

Solaris Management Console toolbox could not be loaded

Hello,
when I start SMC I get this error, toolbox http://ultra:989/toolboxes/smc.tbx could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget http://ultra:898/toolboxes/smc.tbx I got these headers
HTTP/1.0 200 OK
Date: Thu, 27 Oct 02005 21:21:52 GMT
Server: Tomcat/2.1
Content-Type: text/plain
Servlet-Engine: Tomcat/2.1 (Java 1.4.0_01; SunOS 5.9 sparc; java.vendor=Sun Microsystems Inc.)
Last-Modified: Tue, 31 Aug 02004 21:27:14 GMT
and wget complains of
Last-modified header invalid -- time-stamp ignored.
perhaps it is this header that's invalidating the download and so SMC complains?
This is solaris 9 on an ultra 5, fully patched (up to yesterday).
Thanks for your help!

I seem to have come across the same issue as well. On an Ultra 2, I'm running Solaris 10 1/06 (after an upgrade from Solaris 10 5/05). SMC 2.1 was working fine before I applied the latest Recommended Solaris 10 patch cluster. Now when starting smc, I get the message,
"Server Not Running
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running."
with stop signs for all the management tools. I do not have patch 121309 installed which I suspect applies to the 6/06 release. In comparison to a working system, neither workstation had the entry for "smc 898/tcp" in its /etc/services file. I added it but did not make a difference so I removed the entry.
"/etc/init.d/init.wbem stop/start" did not do the trick. Using dananderson's advice in,
http://forum.java.sun.com/thread.jspa?threadID=5057915
I ended up having to completely remove and re-add all packages that had to do with smc using the Solaris 1/06 installation CD set. I confirmed smc was working again without the error. Update Manager suggested I add patches 121308-08 and 124188-02. Hesitantly, I added those two patches, rebooted and confirmed smc produced the error message again. I removed patches 121308-08 and 124188-02 and smc started working again. I will have to refrain from applying those patches so it continues to run.
I wish I had further explanation as to why those updates are killing my smc.

Problem with solaris management console

I have installing solaris 9 x86 12/02 on my PC. After start solaris management console 2.1 and after loged in as root, smc display this message:
System Information is not able to connect to the server because the WBEM server daemon does not appear to be running. If it is running, try stopping and restarting it. After restarting the daemon, please also exit and restart the Solaris Management Console.
SMC server is running ok.
# /etc/init.d/init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Thank you for help.
lukas

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Jds-help and Solaris Management Console compatible with jdk6u1?

Hello,
I am running Sol 10 11/06 for sparc on a Sun Blade. I just upgraded to jdk6u1 from jdk5. I installed all required j6 packages, and then installed patches for j6u1. I then used pkgrm to remove all jdk5-related packages (I searched for all packages starting with SUNWj5 and then removed them). Java seems to be working fine.
Now, my Desktop Overview and other java-related help functions do not work. I get this error:
# jds-help ghelp:jdsoverview
** (jdshelp:826): WARNING **: An exception occured 'Unknown CORBA exception id: 'IDL:omg.org/CORBA/COMM_FAILURE:1.0''
A large jre error log is produced that mentions a problem with JVM:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xfc94dd6c, pid=1338, tid=1
# Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x14dd6c]
Solaris Management Console does not work either, and gives an error that no suitable java 2 version is installed in /usr/java.
Maybe I removed a j5 package I shouldn't have. Which j5 packages are related to the operation of jds-help? Any ideas as to what is causing my problem with jds-help and smc?
Does anyone know FOR SURE that jdshelp and smc are compatible with jdk6u1?
Thank you...

I got rid of jdk6 and re-installed 1.5.0.11. Solaris Management Console 2.1 works again, so it appears as if smc and Sun Studio 11 are both INCOMPATIBLE with jdk/jre6.
jds-help still does not work, with a jvm error, so perhaps it is also incompatible with jdk/jre 1.5.0.10+.

Managing LDAP users with Solaris Management Console

I'm using Solaris Management Console (SMC) to manage users in our Directory Server. Unfortunately, the default "user manager" in SMC does not have a tab to manage netgroups. Does anybody else use SMC to manage users and have you created a custom tool to manage netgroups? If so, how did you do it?

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Messed Java Desktop Release 3

for some reason I can only get into CDE on my Solaris 10 x86 last update.
when I log into the JAva Desktop.. it just hangs without any error msg of any kind.
What I've done that might be due to:
1. trying to set up IPFilter (think it should be working OK now)
2.to change my hostname from the unknown
3. via smc (Solaris Management Console) played with assigning users rights/groups , as I hated it too much when I need to install something to log as root then finding out I have to re-install it for the regular user from his account... like the StarOffice-I've installed it as root, but as a regular used it still wants me to install it..
So what I've done - it seems that I have the same desktop in JD when I log in with a reg. user.. but now it JD does not start..
Oh,I've edited also /etc/passwd for the shells assigned /bin/bash and addded Super-User to my regular user..
At last I'm not 100% sure that no.3 is the problem as I'm not 100% whether I did restart after doing number 3. Basically I'm not sure if I did the reboot prior to no.1,2 or after I 've done all the 3 things....
So how can I get the JD working again?
Any Ideas?
Many Thanks in Advence!

Ok, I don't know which logs to look at.. tried in /var/log.. everythings seems to be OK,no errors , just one warnning which I'm 101% is irrelevant- in xorgl log about something keyboard related.
Now I've tried to log in again into JD and hit Alt+Ctrl+Del to see :
stdprocess
no such file.......
I've tried to start this from console-voila it's a process manager/monitor.. it works..
Any ideas what is messed up?
Anyone?
Many Thanks!

Cannot start Solaris Management Console in Solaris 9

I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else.
There is a error: "Assertion Fail: Offset < fFileSize ..." something like that.
Please help me~~~~~~~

Java Bug 4838130:
http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
env JAVA2D_DEBUGFONTS=1 smc
The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
/usr/openwin/lib/X11/fonts/TrueType, i.e.
env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

Enhanced Storage Problem in Solaris Management Console Started in XManager

I have Sun Fire 480 with solaris 5.9 installed on it. I use XManager 1.3.9 on windows 2000 workstation to connect to it and launch Solaris Management Console (smc). After starting smc I point to Management Tools -> This Computer (sf480dbs) -> Storage -> Enhanced Storage. At that moment Log In dialog appears and I give root user name and password. After a few seconds SMC disappears (exits). If I look at CDE Error log there is the following exception
Thu Jul 31 21:00:36 2003 (/usr/dt/bin/dtexec) /usr/sbin/smc
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@4db52b
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:148)
at javax.help.search.MergingSearchEngine.merge(MergingSearchEngine.java:82)
at javax.help.JHelpSearchNavigator.merge(JHelpSearchNavigator.java:160)
at javax.help.JHelp.addHelpSet(JHelp.java:322)
at javax.help.JHelp.helpSetAdded(JHelp.java:288)
at javax.help.HelpSet.fireHelpSetAdded(HelpSet.java:344)
at javax.help.HelpSet.add(HelpSet.java:256)
at com.sun.management.viper.console.gui.help.VHelpViewer.consoleAction(VHelpViewer.java:138)
at com.sun.management.viper.console.VConsole.notifyListeners(VConsole.java:566)
at com.sun.management.viper.console.VConsole.consoleAction(VConsole.java:512)
at com.sun.management.viper.console.gui.VGUIConsole.consoleAction(VGUIConsole.java:566)
at com.sun.management.viperimpl.console.gui.SMCConsole.consoleAction(SMCConsole.java:292)
at com.sun.management.viperimpl.console.BaseConsoleManager.notifyListeners(BaseConsoleManager.java:370)
at com.sun.management.viperimpl.console.gui.GUIConsoleManager.loadOnlineHelpForTool(GUIConsoleManager.java:1198)
at com.sun.management.viperimpl.console.BaseConsoleManager.loadToolAndReplaceStub(BaseConsoleManager.java:2139)
at com.sun.management.viperimpl.console.BaseConsoleManager$ClickLoader.run(BaseConsoleManager.java:2060)
at com.sun.management.viper.util.ThreadPool$ThreadWorker.run(ThreadPool.java:138)
Caused by: java.security.InvalidParameterException
at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
... 21 more
Can anyone tell me anything what is problem?
I am newby to solaris and any ideas will be appreaciated.
Thanks in advance
David Suladze

Try search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
As I know, smc runs only in graphical mode.
I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.

Solaris Management Console (SMC) - Solaris 9 x86

I�ve just installed Solaris 9 (x86) version. I�m unable to install Solaris Management console.
I was using below command to add listed patches:
pkgadd -d . SUNWpmgr SUNWrmui SUNWlvmr SUNWlvma SUNWlvmg
I�m unable to find these packages on cd1. Somehow they�re on cd2. These cd�s are direct extract from Sun�s web site.
Anyway when I run the pkgadd command I�m getting the following error:
�No package associated with (SUNWpmgr)�
When I look into the SUNWpmgr, there are 2 files (pkgmap., pkginfo.) and 3 dir (install, archive, reloc)
Same with other packages
Please help me.

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

Root password fails on auth to Solaris Management Console Server

I've setup Solaris 10 x86 on a VA linux 1220 server, all is good so far except when I try to create additional users. I am logged in as root, and the root password logs in to the CDE, but fails on authentication to Solaris Management Console Server when I try to use any of the management apps like computers and networks or Users. So I'm stalled at the point where I should be configuring the system. I have been very careful about typing in the password exactly as I use it in the login screen, but it never works in the System Management tools for This Computer. The password I'm using is 26 characters long, is it too long? Or is there a step I'm missing?
Thanks,
Brian

One of my famous guesses, but unless you changed the default password algorithm the maximum length of your password is 8 characters, when logging in on the console or desktop, anything typed after those eight characters will be ignored (unless this behaviour changed very recently).
Its possibly that SMC, and its server component WBEM does not ignore the extra characters, which could cause this behavior.
What happens if you try and login to SMC with the root user and only the first eight characters of your password?
Btw, if this was the problem i think there is a way to change the default crypto algorithm to something that supports more characters.
.7/M.

SMC (Solaris Management Console)

On a fresh install of Sparc Solaris 9 - the SMC app works. Upon patching to yesterday's 9_Recommended - it fails - the applets all have red stop signs in the console, and it says someting like - 'There is no server running...' and 'No Solaris Management Console server was available on the specified server.'
This is in the console:
kermit console login: java.io.FileNotFoundException: /var/sadm/smc/properties/.s
erver (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at com.sun.management.viperimpl.util.security.SMCSSLConfig.setu pServer(S
MCSSLConfig.java:114)
at com.sun.management.viperimpl.server.ViperWbemServer.main(Vip erWbemSer
ver.java:61)
Starting Solaris Management Console server version 2.1.0.
endpoint created: :898
Solaris Management Console server is ready.
I have tried to stop/start/restart the server with the init.wbem script in /etc/init.d
Thanks for any hints!
S7

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

Solaris Management Console hanging

Did anyone have a similar problem?
We are running Solaris Management Console 2.1 on Solaris 10 update 3
It was working fine until recently.
Now, it hangs forever.
We have no problem in launching it, loging to using our normal account, and switching to sysadmin role.
However, it hangs forever every time we try to do some action with the following error message showing on the terminal screen:
Exception in thread "Thread-21" java.lang.NoClassDefFoundError: com/sun/admin/cis/common/ShowCommands
        at com.sun.admin.usermgr.client.users.UserContent$MyListFetch.listAll(UserContent.java:1133)
        at com.sun.admin.cis.common.ListFetch.run(ListFetch.java:284)I am not an expert in Java, but the above message seems to indicate a Sun JRE classpath problem. The symptom in the X-Windows session is always the same: hangs forever when trying to browse users to perform necessary operations, such as adding, deleting, changing groups, and so on.
We have the following JDK installed
$ java -version
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_14-b03)
Java HotSpot(TM) Server VM (build 1.5.0_14-b03, mixed mode)
$All the Java symbolic links seems OK
$ ls -l /usr | grep j
lrwxrwxrwx   1 root     root           4 Apr 15 14:10 j2se -> java
drwxr-xr-x   9 root     bin          512 Jun 21 2007 j2se.old
lrwxrwxrwx   1 root     other         15 Feb 2 02:33 java -> jdk/jdk1.5.0_14
drwxr-xr-x   4 root     bin          512 Feb 2 02:33 jdk
$

I have received the following reply from Sun tech support:
Hello again Shen,
After I got your email I went back through your files and did an internal search on the breaking of classpath and java.lang.NoClassDefFoundError error. I found a case that had similar error messages and the root cause was determined to be the order of the patch installation.
Here is a clip from that case;
===
The patch install order for 121308-12 and 119313-19 can have a negative affect on SMC.
Please have the customer try the following workaround:
patchrm 121308-12 and 119313-19
In this order, patchadd 119313-19 and then patchadd 121308-12
===
Your netinfo files show that you are only up to 119313-16 on your wbem patch. The latest patch is;
119313-19
SunOS 5.10: WBEM Patch
Date: Mar/27/2008
You may find that updating to this patch will make the edit to the /usr/sadm/lib/smc/bin/smc file unnecessary.
Since your original problems have been resolved, I will go ahead and close the case. You may want to consider updating to the latest WBEM patch on your next update cycle.
Thanks,
Dave
I guess patch 119313-19 solves the problem.
I have launched SMC on a few servers that I haven't changed /usr/sadm/lib/smc/bin/smc file.
SMC didn't hang.
So, I checked for patch level and they all have patch 119313-19 installed.

Installing Solaris Management Console

I'm trying to get Solaris Management Console working on my Solaris 9 host. I've installed all the SMC packages:
SUNWmc
SUNWmcc
SUNWmccom
SUNWmcdev
SUNWmcex
SUNWwbmc
Unfortunately, I found out that Solaris Management Console also requires a SUNWCprog cluster install (Developer install) and this host was built last year with the SUNWCuser (End user) install.
Does anybody know what additional pkgs I need to install to get Solaris Management Console to work? I don't have the option of rebuilding the machine and I don't want to install every single pkg in the developer install. It's a waste of space.

I've resolved this issue. On Solaris 9 x86, the default Java installation resides in /usr/j2se. The JavaHelp packages required by SMC install their files to this directory. The Java 5.0 SE installation instructions advise you to redirect the /usr/j2se link to /usr/jdk/jdk1.5.0 if you want Java 5.0 to be your default Java installation. If you do this, you will lose the JavaHelp files and SMC will break.
I resolved this issue by:
1) removing the JavaHelp packages (SUNWjhdem, SUNWjhdev, SUNWjhdoc, SUNWjhrt)
2) deleting the /usr/j2se directory
3) linking /usr/j2se to /usr/jdk/jdk1.50
4) reinstalling the JavaHelp packages (available on disc 2 of the installation set)
SMC now starts and runs normally. It uses the new Ocean laf which I think is much more attractive than Metal. Good work, Sun!
Chris

Patch 121308-12 breaks solaris management console

Dear Moderator,
Hope not asking too much.
Could you notify your counterparts that patch 121308-12 breaks Solaris Management Console?
SMC doesn't load the tool box after patch 121308-12 is applied. I backed out the patch and SMC works fine. Patch 121308-11 is fine.
I had to remove the patch from 50+ servers.
I am running Solaris 10 update 3 on my servers.
What I really want is a version 13 of the patch 121308 that obsoletes version 12. This way, I don't have to worry about this anymore everytime sunUC patches my servers.
Edited by: shen on Feb 20, 2008 5:32 PM

Here it is
# pkginfo -l SUNWCsmap SUNWlvm SUNWCwbem SUNWCwsdk SUNWwbpro SUNWfsmgtu
   PKGINST: SUNWfsmgtu
      NAME: Solaris Local File System Management APIs (usr)
CATEGORY: system
      ARCH: sparc
   VERSION: 1.0,REV=2005.01.09.23.05
   BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
      DESC: Solaris Local File System Management APIs (usr)
    PSTAMP: on10-adms-patch20071214193019
INSTDATE: Feb 21 2008 12:02
   HOTLINE: Please contact your local service provider
    STATUS: completely installed
     FILES:        8 installed pathnames
                   5 shared pathnames
                   5 directories
                   1 executables
                 283 blocks used (approx)
   PKGINST: SUNWwbpro
      NAME: WBEM Providers (usr)
CATEGORY: system
      ARCH: sparc
   VERSION: 2.0,REV=2005.01.09.23.05
   BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
      DESC: Solaris WBEM Providers (usr)
    PSTAMP: on10-adms-patch20071214193040
INSTDATE: Feb 21 2008 12:03
   HOTLINE: Please contact your local service provider
    STATUS: completely installed
     FILES:       72 installed pathnames
                  15 shared pathnames
                  15 directories
                   5 executables
                5051 blocks used (approx)
ERROR: information for "SUNWCsmap" was not found
ERROR: information for "SUNWlvm" was not found
ERROR: information for "SUNWCwbem" was not found
ERROR: information for "SUNWCwsdk" was not found
#4 packages are missing.
Are they supposed to be installed?
We run Solaris 10 update 3.
# more /etc/release
                       Solaris 10 11/06 s10s_u3wos_10 SPARC
           Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 14 November 2006
#Our standard Solaris installation is "Entire Distribution plus OEM support".

Solaris management console 2.1 error

Hi All,
Solaris 5.9 sparc
I am trying to run Solaris management console 2.1
Toolboxes loaded successfully.
But errors appear - There are no solaris management server running on server. LegacyAppTool.client.LaunchLegacyAppTool.

Java Bug 4838130:
http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
env JAVA2D_DEBUGFONTS=1 smc
The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
/usr/openwin/lib/X11/fonts/TrueType, i.e.
env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

Solaris Managment console in Java desktop release 3

Similar Messages

Maybe you are looking for