SOLMAN 7.1 Setup

Hi All,
We are in the phase of configuring SOLMAN 7.1
We have completed phase System Preparation and Basic Configuration.
But in Basic Configuration we left step of Wily Introscope.
Now can we proceed with configuration of Maintenance Optimizer (MOPZ) or we need to do any more configuration.
We have entries of SAP ECC n SAP SRM systems in System Landscape (SMSY) of SOLMAN.
Can anyone please send me proper link for MOPZ configuration in SOLMAN 7.1
Thanks & Reply
Ishan

Hi,
If all other phases except this is executed successfully then you should be able to use MOPZ.
Thanks
Sunny

Similar Messages

Solman 7.0 : setup system monitoring

hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regards

hi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance

SolMan 7.1 setup problem: Activate ESR

Hello experts,
I face a problem in SolMan setup activity Activate ESR (transaction ESR_ACT):
ESR: BI content data exchange setup is not successful.Extractor setup is not executed.
I have already activated Info cube 0SM_BPMRH as described in Setup Guide BP Analytics. Everything worked fine with the activation. But the problem still exists.
Can anybody tell me how to solve this problem or where I can find additional information why the activation was not successfull?
Thanks and kind regards, Basti

Hello,
Please access transaction RSA1 in the BI client. It will ask you to activate the content, choose activate only.
if you didn't choose a different BI client, it is the same as the one you used in solman_setup.
Best regards,
Guilherme

SolMan 7.1 Setup Monitoring - Custom Template is not display to Assign

Hi All,
SAP Solution Manager Configuration: Technical Monitoring - System Monitoring
While creating custom template, i am facing issue, Please check it out below screens,
After done, all setup, the custom template should display to apply and active.But it is not displaying
This is the error msg below,
Please help me out
Regards
Jay

Hello Jagadish,
thanks for your support.
I went with Visual Admin tool to node SID - Server - Services - SLD Data Supplier.
I saw some information - how can I check here?
Afterwards I went to node SID - Server - Services - JCo RFC Provider and saw informations about client, user password. How can I check these informations? I stopped the SAPSLDAPI_SID RFC listener and started again. This worked without problems.
I closed visual administrator and tried to login again via http://hostname:50000/sld. After cklick on button "Administration" there is no reaction - I get a blank site with no information on it.
When I start configuration again through SOLMAN_ADMIN system hangs now in step 107 " SLD Server Configuration".
Regards,
Julia
Edited by: Julia Bayrhammer on Oct 26, 2011 9:04 AM

SolMan 7.1 setup: Activity Services aktivieren is required and must be perf

Hi experts,
I try to configure the new SolMan 7.1 and I am facing the following error in step "System preparation" => Post processing of central correction note:
Activity Services aktivieren is required and must be performed for SM1
I have implemented SAP note 0001552585 SAP Solution Manager: Basic functions 7.1 SP1
Existing Version in Solution Manager: 0027
I don't find any hint which services have to be activated. Any ideas?
Thanks and kind regards, Basti

bd wrote:
All services are active except /sap/bc/webdynpro/sap/wd_ags_uda_display_sap_note (part of SM_IMPLEMENTATION). I cannot found this service in SICF. Has anybody faced a similar issue?
Thanks for highlighting this issue.
Web dynpro application wd_ags_uda_display_sap_note was removed in ST 710, but the activation of the services was not updated.
It's controlled via this table entry:
Table: ICFINSTACT
NAME           SM_IMPLEMENTATION
APPL           SV-SMG
COUNTER        17
PATH           /sap/bc/webdynpro/sap/wd_ags_uda_display_sap_note
EXPAND
HOSTNUMBER     0
STATUS         Service activated
CUSER          SAP
CDATE          28.10.2009
CCLNT          200
DESCRIPTION    WC Implementierung UDA: DISPLAY
INACTIVE
I have created customer message 2511076 2011 (not accessible for you) for easier follow-up. I will let you know, as soon as I have response from the development team.
In the meanwhile, please ignore the warning.
Thanks,
Ruediger

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Solution Manager 7.1 SOLMAN_SETUP - BPO Dashboard Setup stays on red LED

Hi.
We have another strange behaviour in Solman 7.1 Setup->Basic Configuration->Automatic Activities. Step "BPO Dashboard Setup" was first red LED because "Cube 0SM_BPMRH is not active and will now be activated automatically" and then "System status failed for system" without further information in the log.
Now if we execute the step again, the Job AGS_BPO_DASHBOARD finishs successfully, but nonetheless the LED stay red. Also the log below the Automatic Activities list is not updated and has still the two old messages from above in it. I think we refreshed pretty much all buttons on the website and cleared the browser cache.
And by the way: I can't find the mentioned cube in RSA1, isn't this the place where all the cubes should be listed?
Any ideas?
Cheers, Tobias

Hi,
My ST level is on SP08 and the note above can't be implemented. The BPO Dashboard Setup is still in RED icon.
What should I do to resolve this?
screenshot below:
Thank you!
Regards,
AJ

Solution Manager Enterprise Edition - Creating Service Desk

Hi All...
Being a Channel Partner of SAP we have authority to sell sap licenses to our customers.
Now we want to setup a service desk for them in our Solution ManagerEE.
Could you please help me to understand....
1> I am not able to understand the extra functionality of SolMan EE with respect to Service Desk creation.
     Do we really required EE for Service Desk? or with just normal SolMan we can setup that?
     2nd is...
2> I am not able to understand how do I can create system in SMSY, because possibility of having same SID for any of our customers.
     I am not sure how do I can setup a Service Desk for each customers separately.
     If any one of you guys have did same kinda config. before, please guide me....
Thanks!
Amit
Edited by: amit bhisekar on Oct 28, 2008 7:12 AM

> 1> I am not able to understand the extra functionality of SolMan EE with respect to Service Desk creation.
>      Do we really required EE for Service Desk? or with just normal SolMan we can setup that?
SolMan EE has some additional functionality but that is not related to the service desk. A "normal" solMan is enough.
> 2> I am not able to understand how do I can create system in SMSY, because possibility of having same SID for any of our customers.
You can use SIDs like "SID_A" and "SID_B".
>      I am not sure how do I can setup a Service Desk for each customers separately.
Follow the IMG - and note 1023598 - SAP Solution Manager Service Desk for service providers
Additional info:
Out of my experience with the service desk: We are using it since SolMan 2.2 and if we could choose again we would definitely use a different product because
- as soon as you drift away a little bit from the standard configuration, that you can use by default (but often needs adaption) it becomes really complex. Support desk is based on CRM so make sure that you have CRM knowledge (including PPF) in house if you want to do the configuration alone
- after each service pack/support stack installation something is not working and almost each time we need help of the support (OSS/CSS) to get things fixed again
- Bidirectional communication is not possible, you can send answers/inquiries to the message creator but answers are not "automatically" put back into the system (e. g. Mail parsing). That is the biggest drawback
- The UI (if you use the GUI) is.. well... not really intuitive
Markus

SMD E2E: Configuration Analysis

Hi!
I can already see the data for E2E Workload Analysis.
Unfortunately I cannot see the data under the tab "E2E Configuration".
Can some one tel me how to proceed with with errors/warnings?
No SID found for value 'E11 0020198811012003146909000001927' of characteristic 0SMD_FSRC
Invalid filter on 0SMD_FSRC: Filter changed
Characteristic 0SMD_CSAL was changed in InfoCube 0SMD_CA01. Adjust the query
What I have already done
tcode RSRT --> Gen. query directly --> "0SMD*"
tcode CCMSBISETUP --> Sceanrio "E2E"
Any helpful information will be appreciated
regards
Thom

Hi,
I'm trying to setup E2E. Diagnostics server (BI client in solman) & Managed system setup was done.
I don't see any graphs(at least plain) in solman. I observed that extractor jobs are failing, also i dont see any info objects under solman diagnostics in TC - RSA1.
Please guide.
Thanks in advance.

CHARM - how to assign

Hi,
I have configured ChaRM in our solman system, and setup STMS. I get some warning on the check, but no errors.
Now I can create the change request either by going to crmd_order or thru service desk. My question is - how do I assign reporter, change manager, tester etc and get them emails when a task is assigned to them?
Thanks..

following is a change scenario i am working on .. please help me / advise..
1 - Key User creates a Support Message > An email is sent to the key user after message is created - OK
2 - The message arrives to HR Support Team > An email arrives to Support team - OK
3 - Processor is assigned -> An email goes to processor, and to the reporter - OK
4 - Processor identifies a CHANGE - Informs CHANGE MANAGER - An email should be sent. How can I do this???
5 - Change Manager assigns to DEVELOPER - An email need to be sent - How can I do this?
6 - Tester - An email need to be sent - How can I do this?
7 - Back to the processor - OK
first of all, Is this a good scenario? can you please advise on any different scenarios?
many thanks for all your suggestions... appreciate your help...
JZKALH

SAP EHP 1 for SAP Solution Manager 7.0 configuration check

Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM

Monitor oracle tablespaces in CEN

Hi,
I have managed to setup auto reaction methods for filesystems, which was a bit of a long method i opted for but it works wonders and i get emails for the specific system and file path. One aspect i am having trouble with is monitoring tablespaces. in DSWP i have setup the threshold levels for all the tablespaces and in RZ21 in SolMan i have setup an auto reaction method to monitor PSAPUNDO which quite often hits 80% and use this to test it. In the CEN system's RZ20 i cannot see the remote system's list of tablespaces other than SolMan's own tablespaces so opted to configure RZ21's "Manage Central Autoreactions" but the tablespace has hit pass 90% and no email was triggered. i have used the MTE class CCMS_ORAucPSAPUNDO and i wish the names were more meaningful which i assume 'u' means "used"
Has anyone setup this sort of monitoring?
thanks Mani

Need to check does your agent uploading XML files? some cases it fails to upload then you need to upload manually
emctl upload agentor reconfigure if any problem occurs still

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

PI monitoring setup in Solman 7.1

Hi Experts
I have to setup PI monitoring in solman 7.1 I have followed following document for this:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/408e1501-fb8c-2e10-edba-f51f13cde64e?overridelayout=true&51556787604320
"Setup GuideCentral Monitoring of SAP NetWeaver Process Integration 7.3 with SAP Solution Manager 7.1"
As per this guide following are the prerequisites for this setup:
–Landscape Setup (once/per PI SLD)---Done
–Managed System Configuration (per Technical System)---Done
–System Monitoring Setup (per Technical System)----Done
–PI Monitoring Setup (per PI Domain)--- Not able to see the PI domains in step 4 (define scope)
The solman SLD version is 7.0212.20120528123254.0000
Can you please suggest some solution so that I can get the PI domains listed in PI monitoring
Thanks in advance

Hello Vineet,
Please also see the following Central PI Monitoring Documentation and Help Area Wiki page which includes How to/Installation/Setup and Troubleshooting guides:
PiMon_Home - Technical Operations - SCN Wiki
Regards,
Ruth

Solman Setup system Monitoring alert threshold value for Filesystem issue

Hi,
Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
The same works fine for filessytems if target system OS is unix.
I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

Hi Sonal
when you want to save the thresholds for only the one MTE you set
you need to click on
EDIT
-> PROPERTIES
-> USE FOR INDIVIDUAL MTE
Kind Regards
Marius

SOLMAN 7.1 Setup

Similar Messages

Maybe you are looking for