SolMan Adapter HP QC, not able to link documents in Quality Prerequisites

Hello Everyone: I am currently using Solution Manager 4.0 with the adapter for HP Quality Center activated.
Within the Quality Prerequisites tab (formerly  known as Quality Standards tab) if I try to add a Quality Prerequisite document with the option "Link to a Solution Manager Document" I am not able to find any existing Solution Manager Document except for those that were previously created within the same Quality Prerequisites tab.
I would like to know if this is an issue or is it a normal behavior for this adapter.
Link:[http://img185.imageshack.us/img185/8909/solmanqualityprelinktodjd6.png]
I will appreciate your help on this matter.
Thank you ,
Jerry Rodriguez
Edited by: CESAR RODRIGUEZ on May 16, 2008 12:27 AM
Edited by: CESAR RODRIGUEZ on May 21, 2008 2:10 PM

Hello,
If you want to create a link, it is the normal behaviour as only object of this type are available for linking.
If you want to create a copy, you would be able to select documents from the other tabs.
Regards,
Thierry

Similar Messages

  • Acrobat Professional 7.0 not able to PDF documents

    Acrobat Professional 7.0 was working fine, then I got a message to update to Acrobat 7.1. I clicked yes, it installed, I restarted, and now I can't PDF documents anymore.
    The document opens a pop-up, "Missing PDFMaker files. Do you want to run the installer in repair mode?" immediately after I save the to-be-pdf'ed document. When I click "yes", It slowly runs the repair mode, then the computer shuts down and restarts. I go to PDF again, and I get the same "Missing PDFMaker files". I don't know what to do about this.

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:14:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: Acrobat Professional 7.0 not able to PDF documents
    Yes! Thank you. I played around with it some and found that is the case, that I can PDF through the printer as well as bring the application up. I suppose it's just not install-able in full because it just cannot link up with Windows 7 in any capacity.
    That's all the ability that I need at the present time. Nothing special, just whether it can or can't. Thanks!
    >

  • I'm not able to open documents saved from the internet.

    I'm not able to open documents saved from the internet. I'm using a macbook pro en Adobe Acrobat X 10.1.10. I tried: file - export als PDF and save as PDF, none of this works. I always receive a message stating an error and saying that I need to go back to the original file what I did without result. Does anyone have (or had) the same problem?

    What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

  • I AM NOT ABLE TO RECIVE DOCUMENTS IN MY EMAIL, if some one sends me a word document I am not able to see it

    I AM NOT ABLE TO RECIVE DOCUMENTS IN MY EMAIL, if some one sends me a word document I am not able to see it

    Do you have MS Office installed? If not, you need to either:
    1) buy a compatible copy of MS Office†, or
    2) get one of the free, open-source Office-compatible packages like LibreOffice.
    We possibly can offer further enlightenment if you tell us more about tyour iMac. Do "About this Mac" from the Apple menu and post what the resulting window says about your Mac OS version and the processor type.
    †-- NOTE: The pre-2006 Macs this forum serves can use no higher version of MS Office that Office 2008. Office 2008 requires a 500mHz G4 processor, any G5 processor, or Intel processor, and a minimum Mac OS of 10.4.9

  • I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

    I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

    You mean take the cover off of the iPhone, to look inside?  I'd recommend against it.  Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
    Other than that, any repair/service options are going to cost money.  You might want to see if a wireless carrier will let you get a new contract & phone.
    Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider?  Did I understand that correctly?

  • Not able to see document when I click Generate Document link in SSHR

    Hi,
    I have created a 'Generate Document' link on 'Change Hours' page of SSHR.
    But When I click on that link,I am seeing a blank screen and could not get the document.
    Please help me in this tio resolve the issue.
    Thanks,
    Srinivas

    Dear Srinivas,
    Since I am not able to understand the specifics of the SSHR Page, its slightly difficult to suggest something. If you can share the technical details of the page, it might be easier to make a guess. Btw, in case this is standard page behaviour, Oracle Metalink might be a place to look out for resolution.
    Regards
    Sumit

  • I am not able to link my bank account with the store .... So I am not able to download anything from the store plz help

    Plz help in liking my account with the apple store     Because I am not able to download anything from apple store

    Have you called your credit card issuer? They may be able to provide a reason for the declined purchased.
    Also, you can only register for and use the App Store in the country your credit card is issued. Be sure you are buying apps from the correct App Store.

  • I am not able to link my sensor with my iPod nano

    I was recalibrating my nike plus with my nano and now I am not able to like the two.

    Have you called your credit card issuer? They may be able to provide a reason for the declined purchased.
    Also, you can only register for and use the App Store in the country your credit card is issued. Be sure you are buying apps from the correct App Store.

  • Not able to attach document duirng SC creation

    Hi All,
    We are using SRM 5.0 classic scenario. While creating SC we trying to attach the document by uploading it but we are not able to do so.  It does not give any error as well. Just the page refreshes and no link to document is available.
    I am new to SRM . Request to pls guide how to trace the error.
    With Regards,
    Darshan

    Hi Darshan,
    Its not clear from your message that whether the Documents and attachments functionality in shopping cart was working before or not.
    However for this functionality you need to activate the required service using SICF transaction.
    Execute the SICF transaction and then drill down to doc server service under default_host  sap  ebp and then click on Service/Host in Menu and click on activate option to activate the service.
    Once the service gets activated the greyed out service will become bold.
    Only after that the documents can be attached in Shopping cart / P.O. using the Documents & Attachments node.
    You can also restict the size and type of documents attached using BBP_ATT_CHECK BADI.
    Please check the above mentioned settings and let us know in case of any issues / clarifications.
    Award points for answers that help you in resolving your issues.
    Regards,
    Teja

  • ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!

    Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
                             (ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
                             (iii) ADRMS Running on Windows Server 2008.
                             (iv) Clients are using either Windows 7  with Office2010 pro or Windows 8 with Office 2013.
    Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
    configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
    I checked > 'rms.company.com' is added to local intranet site using IE.
    So far I think clients computers are not able to retrieve the rms url.
    Kindly, suggest how should I approach to the solution.
    NB:- I am  new to ADRMS.

    Hi Ashim Kumar Nath,
    Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
    CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • Not able to upload Documents using  BAPI_DOCUMENT_CREATE2 (From SE37)

    Hi
    Not able to upload and created Document in SAP DMS Repository using Function BAPI_DOCUMENT_CREATE2.
    I'm using this BAPI directly from SE37.
    Alwasy it is giving Error - E26 253 Error while checking in and storing:c:\ZANALYSIS_PATTERN.XLS
    Inputs I have given -
    In Document Data -
    Document Type - SDC
    Document Version- 00
    Document Part - 000
    Description - TEST
    In Document Files -
    Document Type - SDC
    Document Version- 00
    Document Part - 000
    Storage Category - ZHCL_CS
    WS Application - XLS
    DocPath - C:\
    DocFile - C:\ZANALYSIS_PATTERN.XLS
    Language - EN
    CheckedIn - X
    PF_FTP_DEST - SAPFTPA
    PF_HTTP_DEST - SAPHTTPA
    DEFAULTCLASS - X
    Please advice if I had skipped something and mentioned anything wrong.
    Thanks
    Prashant

    HI,
    I am also uploading a pdf file to dms through bapi_document_checkin.
    I am getting error E26 253 Error while checking in and storing:C:\DOCUMENTS AND SETTINGS\AGARW01S\DESKTOP\10 2_VIEW 1.PDF
    Inputs I have given -
    In Document Data -
    Document Type - SPE
    Document Version- A
    Document Part - 000
    Description - UPLOAD
    In Document Files -
    Document Type - SPE
    Document Version- A
    Document Part - 000
    Storage Category - DMS_C1_ST
    WS Application - PDF
    DocPath - C:\DOCUMENTS AND SETTINGS\AGARW01S\DESKTOP\10 2_VIEW 1.PDF
    DocFile - 10 2_VIEW 1.PDF
    Language - EN
    CheckedIn - X
    PF_FTP_DEST - SAPFTPA
    PF_HTTP_DEST - SAPHTTPA
    can u please help me as it is urgent.
    Shilpa

  • Not able to post document using BAPI_ACC_GL_POSTING_POST

    Hi all,
    While trying to post documents in FB60 using BAPI_ACC_GL_POSTING_POST we are getting error Account not assigned to company code. But we are able to post documents manually using the same account and company code. Couls any one help me out to resolve this issue.
    Thanks & Regards,
    Neela.

    This is complete procedure to use 'BAPI_ACC_DOCUMENT_POST'. It can be used for GL, AR or AP documents.
    Step 1:
    For Header information, fill u201CDocumentHeaderu201D structure as:
    obj_type = 'BKPFF'
    obj_key  = '$'
    obj_sys = CONCATENATE syst-sysid 'CLNT' syst-mandt
    bus_act = 'RFBU'
    username  = syst-uname .
    comp_code = Company Code
    doc_date  =  Document Date
    pstng_date = Posting Date
    doc_type = Document Type like AB, SA.
    ref_doc_no = Reference Document
    To populate the line item data, fill internal table u201Caccountglu201D or  u201Caccountpayableu201D or u201Caccountreceivableu201D as:
    itemno_acc = Line Number (like 10,20)
    gl_account = GL Account Code (For GL Line Items only)
    vendor_no  = Vendor Number (For AP Line Items only)
    customer   = Customer Number (For AR Line Items only)
    acct_type  = 'S' or u2018Ku2019 or u2018Du2019. (GL = u2018Su2019, AP = u2018Ku2019, AR = u2018Du2019)
    costcenter = Cost Center
    orderid    = Internal Order
    tax_code   = Tax Code
    item_text  = Item Text
    quantity   = Quantity
    base_uom   = Unit for Quantity
    Note:
    u2022 Separate internal tables should be created for GL lines, AP Lines and AR Lines.
    u2022 If posting GL line items then only u201Caccountglu201D internal table should be filled.
    u2022 If posting AP document then GL lines should be filled in table u201Caccountglu201D and Vendor lines should be filled in table u201Caccountpayableu201D.
    u2022 If posting AR document then GL lines should be filled in table u201Caccountglu201D and Customer lines should be filled in table u201Caccountreceivableu201D.
    u2022 Extension of each line of u201Caccountglu201D, u201Caccountpayableu201D and u201Caccountreceivableu201D must be there in u201Ccurrencyamountu201D.
    To populate the amount, fill u201Ccurrencyamountu201D structure as:
    itemno_acc   = Line Number (like 10,20, but pair of u201Caccountglu201D line)
    amt_doccur = Amount {Credit amount should be with sign
    currency  = Currency
    Step 2:
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = st_documentheader
      IMPORTING
        obj_key        = w_objkey
      TABLES
        accountgl      = i_gl  {GL Line Items}
        accountpayable = i_ap {AP Line Items
        accountreceivable = i_ar {AR Line Items}
        currencyamount = i_amt {Amount of all above}
        return = i_bapiret. {Return messages}

  • Not able to display document at sost transaction

    I am sending a mail by using the function module SO_NEW_DOCUMENT_ATT_SEND_API1. Initially I was able to see the document at SOST transaction. But now I am not able to display the document even though I had not done any changes in the program.

    Hi,
    In SOST goto SEND STATUS tab and check all the check boxes ie, Waiting, Errors & Sent.
    Hope this works.
    Regars
    Bikas

  • Not able to link more than one EO to the VO.

    Hi All,
    I have to add a new column from another table to the existing VO.
    I have followed the below steps.
    Step1: I have created a new EO for the new table
    Step2: I have created a new VO which extends the existing VO.
    Step3: While extending the new VO, i have added the new EO and old EO is also there and modified the query as per my requirement.
    Step4: I have substituted the VO and bounced.
    Step5: Through personalization, I have added a new field to the page and assigned the new column name as view instance.
    Now when i run the page, values are not going to the database for the new column.
    When i clicked on Aboutthis page, VO is substituted with the new VO, but it is attached to only one EO which is the existing one, And the new EO link is missing.
    Can you please tell me whether i missed any steps or did any mistakes while performing the above steps.
    It is urgent, please help me ...
    Thanks,
    Manjula

    I am little bit confused.
    Can you tell me whether I can have more than one EO updateable in a VO or not?
    In my case, this is simple join, there is no Outer Joins in my query.
    Yes you can an have more than one EO updateable in a VO if there is no Outer Joins in query.Can you tell me the subject of the thread or threadid. I couldn't find the thread what you are saying.
    Actually that thread, i have followed the approach Tapash, mentioned ...at that time...but somehow it didn't worked in my case, anyways, you can surely give a try.I had 3-4 EOs with all outer joins.--Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Not able to link Vendor and Customer

    I have created a vendor (V) and customer (C) without linking.
    Now when I edit the customer to associate vendor to it - when i add the vendor in 'Vendor' field and when saving it is giving error saying Vendor V is not linked to Customer C. This is happening other way round also. When I am creating Vendor and trying to give customer C in 'Customer' field, it is giving error - Customer C is not linked to Vendor V.
    What is happening here ? Am I doing anything wrong ? Which one to create first ? How exactly to associate ?

    Hi,
    You might have not read the above replies to your question correctly.
    Hope you are getting the below message.
    *Customer XXXXXX is currently not linked and will be updated accordingly
    Message no. F2293*
    Since the above is an warning message and can be ignored.
    If this is not the message that you are getting, then provide us the message number and long text in order to suggest you with the solution.
    Regards,
    Srinu

Maybe you are looking for