SOLMAN_SETUP not working after login

Hi,
We have installed solution manager,
and trying to configure it using Tcode SOLMAN_SETUP,
this Tcode is not working, it opens browser fine, but with some warnings:
Then after I input the password and user name of user "ddic" and press the login button the page then goes to "The Website cannot be displayed HTTP500" as follow screenshot:
and if i do refresh it gives me the following error:
pls advise.
Thanks
Adiac

Hi Galan,
Check the below parameters and also make sure that services are activated in SICF.
icm/host_name_full
SAPGLOBALHOST
SAPLOCALHOSTFULL
SICF Services are :
/sap/bc/webdynpro/sap/ags_work_incident_man
/sap/bc/webdynpro/sap/ags_workcenter
/sap/bc/ags_workcenter/ags_work_appln
/sap/bc/ags_workcenter/ags_work_webgui
/sap/bc/webdynpro/sap/ags_work_trans_print
/sap/bc/webdynpro/sap/ags_work_incident_create_app
/sap/bc/webdynpro/sap/ags_work_change_man
/sap/bc/webdynpro/sap/ags_work_setup
/sap/bc/webdynpro/sap/ags_work_job_sch_man
/sap/bc/webdynpro/sap/ags_work_implementation
/sap/bc/webdynpro/sap/ags_work_bp_iterf_mon
/sap/bc/webdynpro/sap/ags_work_services
/sap/bc/webdynpro/sap/ags_rbe
/sap/bc/solman/nwbc/solmanwork
/sap/bc/webdynpro/sap/ags_work_gui_selection
/sap/bc/dal/demoA
/sap/bc/webdynpro/sap/wdc_wba_rfc_monitoring
/sap/bc/bsp/sap/wba_start_smdia
/sap/bc/webdynpro/sap/ags_work_gui_default_set
Thanks & Regards,
Sandeep

Similar Messages

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

Satellite Pro M10 Fn-F5 not working after login???

Im hoping someone can help me. Im totally confused.
Im running a projector off of a Satellite Pro M10. The Fn-F5 works perfectly all the way up until the CTRL - ALT - DEL prompt. Even at this point I can still Fn - F5 and flip through the settings. As soon as I login the FN - F5 doesnt do anything? I have removed all the monitors, reinstalled the video card with the latest driver and installed the Device Function key utility from the website?
I am assuming it must be something with the display settings once the user logs in but I cant work it out? I have tried taking the setting down to the basic 16bit and 800 x 600 but it makes no difference?
Any help or pointers would helpful?
Thanks
Mark

Hi
Sorry but you posting is a little be confused.
The FN+F5 combination allows you to switch between display devices. You can choose an external monitor, TV etc.
If you want to use the FN keys you have to install the Driver for Toshiba Display Devices Change Utility (Display Device Change) and the Hotkey Utilities for Display Devices.
These both applications are responsible for the correctly usage of the FN+F5 option.
The display graphic driver has nothing to do with the FN+F5 keys.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

Zsh completion can not work after re-login

I follow http://www.linux-mag.com/id/1106/
my .zshrc
autoload -U compinit
compinit
zstyle ':completion:*' verbose yes
zstyle ':completion:*:descriptions' format '%B%d%b'
zstyle ':completion:*:messages' format '%d'
zstyle ':completion:*:warnings' format 'No matches for: %d'
zstyle ':completion:*' group-name
if [ -d ~/zshfunc ] ; then
r() {
local f
f=(~/zshfunc/*(.))
unfunction $f:t 2> /dev/null
autoload -U $f:t
fpath=(~/zshfunc $fpath)
autoload -U ~/zshfunc/*(:t)
fi
There is a ~/zshfunc/_fossil script, but it can not work after re-login.
The temp workaround is re-type 'compinit' manually.
fossil <tab> # will use file name as completion
compinit
fossil <tab> # will show commands for fossil
Last edited by dlin (2014-11-10 00:47:14)

Hi
Thanks for the tip. However, I elected not to save the XP SP2 uninstall files when I installed SP2. so I appear to be stuffed.
There must be some creative drivers that work with an audigy with XP SP2 installed!
If not then its either re-format the Hard Dri've and re-install everything again (Doh!!) or get another (not Creative Labs) soundcard.
this is really bugging me.
Zonker

Apple Mail not working after internet outage.

10.9.5 Mail not working after internet outage. Connection doctor shows everything green. Other apps connecting to internet fine. Mailboxes show online. I can login and get mail via web iCloud.com. But Mail app will not send or receive. Tried rebooting Mac, and restarting Mail. Tried Rebuild. Second day with this problem.

Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

USB Keyboard Not Working At Login Screen

After waking my brand new Mac Pro (OS X 10.7.4) from sleep, my usb keyboard sometimes becomes unresponsive. So, at the login, I am unable to type my password in order to restore my session.
Is there a reason for usb devices to not work after waking the mac up? I tried all of the usb ports on the mac, as well as all the ports on both monitors. Thankfully, I have a bluetooth mouse and that works. But no idea why the usb devices stop working all together...
My software is completely up to date. And since this computer is less than a month out of the box, I'm puzzled as to why there would be any issues with it. Please let me know if there is a setting that affects this and what I need to do to fix it.
Thanks!

Maybe it needs to be plugged into the Mac before it goes to sleep...
Because when it wasn't letting me type anything I tried every USB port on the Mac itself, as well as the monitors, and even using an extender. Nothing worked.
However, I did eventually leave the keyboard plugged into the Mac and it woke up without a problem this morning. So, I'm hoping your solution did the trick!
Thanks

ISight not working after screen repair

My iSight is not working after a screen repair (which was damaged during Apple fixing the topboard!). Could it be possible that the camera is damaged in some way during a screen being replaced? I am a bit annoyed that they did not check the machine after all of teh repairs were made as I have a number of adverse issues with it now.
Has anyone else experience this after a screen replacement? I get the message that there is no camera attached, or that it is in use. I have followed threads regarding checking login items etc, to no avail.
The iSight is important to me as I am a long way from home. It is annoying that something seems to go wrong with the MacBook, when I most need it.

When an iSight isn't working, there are a variety of simple things you can try (see further below), but one thing few people think of, is to connect a Firewire or USB drive that contains a bootable system, which has previously been tested on a known-good Mac to make sure the iSight works when booted from that drive, and see if the problem still occurs with the Mac that's under test. That's a quick way of testing whether the problem is hardware or software.
Other things to try:
- Reset PRAM, NVRAM, and Open Firmware.
- Reset your Mac's SMU--see documentation for your Mac for specifics.
- Repair permissions.
- Make a new user account, and see if it happens there.
- Check Login Items in the Accounts prefpane for anything that might be causing the trouble, like printer or scanner items.
- Try what's suggested at www.eriymati.com.ar/isight/
- Reset the printing system in Printer Setup Utility, since some printer/scanner drivers can stop the iSight from working--if that helps, see if your printer/scanner can work with OS X's built-in drivers; if it can't, download the latest driver for your printer/scanner from its manufacturer's web site, and see if that allows the printer/scanner to work, without interfering with the iSight, but some manufacturers, including HP, Epson, etc. are still dragging their feet about making such drivers. If the printer/scanner driver still causes trouble, uninstall it, then replace the printer/scanner with one whose manufacturer has enough brains to write a driver that doesn't interfere with the iSight (some specifically state now, in their System Requirements, that they don't work with Macs that contain built-in iSights, so check this before you buy another printer/scanner).
Sometimes a non-working iSight is caused by something wrong at a "deep" System level (meaning, it might be caused by a single bad or missing file, but it might take days to find it)--if you find that to be the case, the quickest fix if you find the steps above (and others described here and elsewhere), is to reinstall OS X, either by doing an Archive and Install, or by making a bootable backup of the drive, erasing it, then using Migration Assistant to copy the data from the backup.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Wi-Fi not working after upgrading to 3.0

Has anyone experienced their Wi-Fi not working after upgrading to 3.0? It has happened to me on my home network. I know the internet connection is good because I can successfully connect via my Mac. When I turn off the Wi-Fi and use AT&T, I can connect to the internet. I go back to Wi-Fi and no connection.
Any suggestions would be appreciated.

Hi There,
Yep I can confirm that I am having problems with wifi as well.
My problem is that it is not re-joining known networks.
Also the auto login feature designed for hotspots does not seem to work well either. The Log In Screen slides up then an error keeps repeating on the page...."Error Opening Page - The page could not be opened because an error occurred"

Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

Fingerprint Reader not working after windows password reset

Hi There
I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
Why finger print is not working after windows password reset? What should I do to login?
Help would be appreciated!!

I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
1. You should change fingerprint while changing windows password. I don't understand the reason behind it, btw is this true?
2. We can't do anything for this issue.

T40 KEYBOARD NOT WORKING AFTER STARTUP

IBM THINKPAD LAPTOP
T40 237372M
OS WINDOWS XP PRO SP3
•86 key keyboard with imbedded numeric keypad and
integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
SUBJECT; KEYBOARD NOT WORKING
AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
I HAVE A TEMPORARY SOLUTION TO OVERCOME THIS PROBLEM BY;
1 )USING MOUSE OPEN START/ THEN NOTEPAD
STILL UNABLE TO ENTER TEXT
2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
WITHOUT SAVING
I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
CAN ANYONE CAN HELP ME THANKS

Hi and welcome to the forum!
Does the keyboard work fine inside the BIOS?
Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
Keep us informed.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Magic Trackpad's One Finger "Tap to Click" Not Working in Login Window?

Magic Trackpad's *One Finger* "Tap to Click" Not Working in Login Window:
All of my iMac's accounts have *One Finger* "Tap to Click" turned on (checked) in System Preferences. However, in the Login Window where the user decides which account to login to, the Magic Trackpad's clicking ability does not work even though moving the arrow does work. How do I turn on the Magic Trackpad's ability to click in the Login Window?

After accidentally pressing down on the Magic Trackpad, I realized the trackpad has tactile feedback, that is, it is a big button that can be pressed down and pop back up like old computer mice. Though this will allow the trackpad to select the account I want to open in the Login Window, it still doesn't explain why "tap to click" isn't working in the Login Window. Nevertheless, my question can be considered as answered.

SOLMAN_SETUP not working after login

Similar Messages

Maybe you are looking for