Solman system configuration to monitor a ECC system

Hi Experts
I know theer is something called system monitoring in solman system.
Can you help me wtith the guide of solman 7.0 to do such configuration.
Cheers
Pooja

i have referred all these links.
but not what i wanted.
i am  looking for a guide for system monitoring purpose.
to configure a ECC/NW to solman and monitor its performance.
Can any one help me in this.
Regards
Pooja

Similar Messages

  • Implementation/Configuration/Best Practises for the Solman System.

    Hello Guys,
    In our landscape, we tried to configure the Solman system for Service Desk Functionality.
    But the system does not work as expected, I am sure there has been a lot of misconfiguration and setups.
    e.g.
    1. When we directly try to create a message to SAP from the Support Message it goes to the webpage but does not detect the system in SMSY (  shows the error that system is not maintained in SMSY though they are maintained there ).
    2. The S user Id is not detected.
    3. How should we connect and synchronize the Solman of our system with that of other external Solman system so that we can directly see the issues/support messages in the landscape of that Solman system.
    Similarly there are various questions related to the Solman.
    This is a learning project for us but soon we are to implement this in actual business scenarios.
    Can you please suggest any Best Practice kind of guide/document/paper for the purpose?
    PL guide guys,
    Thanks and Regards,
    Yuvi.

    Hi Fabricius,
    Thanks for providing that link.
    It lists a lot of information but not what we are looking for.
    e.g. If you see the Service Desk under Incident Management, in the prerequisites itself it says that "The Service Desk is configured for the Solution Manager according to the configuration guide."
    And this is exactly we are trying to do - Configure the SolMan system.
    Now which is this "Configuration Guide" mentioned in this prerequisite?
    In the "http://service.sap.com/instguides" ,or on SAPNET itself for that matter, I could not find it!
    Any idea?
    Pl help.
    Regards,
    Yuvi.

  • "Table VSEOPARENT is not in the database" after SolMan system copy to x64

    Hi SDNners,
    We've just completed a system copy of our SolMan 3.1 system onto a new
    (Xeon x64 based) server. This system copy is part of the process of
    moving SolMan 3.1 from an old server onto 64bit hardware and then
    upgrading it to SolMan v4 and Oracle 10G.
    Although the system appears to start properly in the MMC, we are unable
    to log into the system through SAPGUI - we get a SYNTAX_ERROR window
    instead of a logon screen.
    I've checked the SysLog from within the MMC and noticed a number of
    errors stating:
    Database: Table VSEOPARENT is not in the database
    Database: Table VSEOIFIMPL is not in the database
    Database: Table VSEOIFCOMP is not in the database
    I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
    it confirmed that the table didn't exist. I then ran the same command
    on the source SolMan system and it showed that VSEOPARENT DID exist. I
    don't understand how these VSEO* tables could have gone missing between
    the source and target systems.
    I've searched OSS for VSEO* and cannot find anything. Please help!
    Thanks,
    Arwel.

    We have 640 kernel, ECC 5.0 and BASIS patch 23.
    For me the problem was with SAPVIEW table wasnt imported from source to target becuase SAPVIEW.STR file was 0 byte. STR files gets created in export preparation phase.
    It did happen because on source side master DVD, there was no option for export preparation. I had only option for tablesplit and export db.
    I did use ECC 5.0 SR2 Master DVD which had option for export preparation phase and that created SAPVIEW.STR file.
    Using migration monitor I did re-export and re-import and this time all views are imported in target.
    Regards,
    Mamadi.

  • Risks when maintain only one SolMan system for DEV, QAS and PRD systems

    What are the risks involved when maintaining only one solution manager system for entire client landscape(Small size).
    Or No risks are involved?
    Or Is this the SAP rrecommended approach for small size landscapes?
    One SolMan system -> DEV and QAS and another SolMan system -> PRD.

    >
    Sanjai Prabu Govindan wrote:
    > What are the risks involved when maintaining only one solution manager system for entire client landscape(Small size).
    > Or No risks are involved?
    Anand: Risks Involved depends on what all aspects\Scenarios the Solution Manager System is used for. It Could be used for the following purposes
    1) Service Desk
    2) Solution Monitoring
    3) System Monitoring
    4) Change Management
    How do you propose to use the Solman system ?
    >
    > Or Is this the SAP rrecommended approach for small size landscapes?
    > One SolMan system -> DEV and QAS and another SolMan system -> PRD.
    Anand: This is the most idealistic and SAP recommended way of using Solman....it always better to have it this way no matter in how many scenarios you intend to use Solman for....
    Regards,
    Anand.....

  • Can I use Solman 3.2 for EWA reports and Monitoring for ECC 6.0/BI 7.0?

    We are upgrading to ECC 6.0 / BI 7.0 and need to know if solman 3.2 will continue to work OK with these systems? or do we need to upgrade to 4.0..?
    thanks,
    Linwood

    Hi Linwood,
    the Service Content ST-SER which is available for SolMan 3.2 will not include ECC 6.0 / BI 7.0 specific checks.
    I agree with Ragu, plan the upgrade and benefit from the new E2E Diagnostics capabilities for the entire landscape.
    [http://www.service.sap.com/solutionmanager|http://www.service.sap.com/solutionmanager]
    [http://www.service.sap.com/diagnostics|http://www.service.sap.com/diagnostics]
    Regards,
    Ruediger

  • Solman system not shown RCA Change reporting for ABAP_Transport store

    Hi,
    We have configured RCA in Solman system.
    We try to get Change reporting comparison of ABAP_transport for Dev and
    Qas system.
    But it shows error as Different technical system in Reference and CustomValue.
    SAP Solution Manager 7.01 SP20
    Regards,
    Karthik

    Jansi,
    After selecting my QAS and DEV system in System Analysis for Change Reporting.
    Select ABAP_Software(6store) of both system and then i click Comapre
    And the status displayed as u201Cu2260u201DChanges were detected of Dev system, then i select the Dev system showing
    Name                                                                 Reference Value                          Status                         Custom Value Details
       ABAP-SOFTWARE
       ABAP_NOTES
       ABAP_PACKAGES
       ABAP_SWITCH_FRAMEWORK
       ABAP_TRANSPORTS                                Different Technical System    Not allowed/Not Relevant    Different Technical System
    I am comapring ABAP_Transport of QAS and Dev system. but its showing  not relevant status.
    Regards,
    Karthik

  • Send/receive IDOCs to SOLMAN system using AS2 protocol!

    Hi All,
    I want to send/receive IDOC file to/from web based SOLMAN system. Currently I'm using FTP server to send/receive IDOC file.
    As of now the current process is to send the IDOCs from ECC to FTP server and from FTP to third party and vice-versa. But due to some constraints, I'm bound to use web based SOLMAN system. Please, can you let me know how to send/receive IDOC files to SOLMAN. Is there standrad FM/method to connect to SOLMAN from ECC as in case of FTP we have FM 'FTP_CONNECT'. Heard that same functionality in case of SOLMAN can be achieved  through AS2 protocol.
    Kindly help.
    Thanks.
    Regards,
    Mukesh

    Hello Patrice
    We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
    Since your que is three years old, I'm sure you must have found some method for this.
    We'll highly appreciate your help.
    Regards: Gaurave

  • ChaRM migration to New Solman System

    Hi,
    We are planning to Migrate old Solman system ChaRM to new Solman ChaRM.
    Now how can I migrate RFCs & CDs to new Solman system ChaRM.
    Regards
    P K

    Hi PK
    There is no tool for moving the SLFN documents from one solman to the other. The only option to keep the already created tickets is to upgrade the the existing solman system to release 7.1.
    In SOlman 7.1 SM* transaction types are comming so during the upgrade we don´t make any changes to the old transaction types like SLFN, so the upgrade should not change your current configuration in solman 7.0 for incident management.
    You will not have any impact on Service Desk when using the old transaction type SLFN.
    So there can be only one recommendation for your situation:
    Perform an UPGRADE and please don't go for a fresh installation with data migration afterwards.
    There is no easy transfer of CRM document (as incidents, change requests, issues, top issues, ...) available.
    Advantages of the upgrade:
    - standard procedure
    - configuration and data is available after the upgrade
    The solman 7.1 is coming with new transaction types that you need to customizing  and it is not touching the old transaction types existing in solman 7.0.
    Please, take a look at this:
    http://scn.sap.com/docs/DOC-30133
    Also check below note which answers few FAQ's:
    1567003:  FAQ: ST710 Incident Management Frequently Asked
    Check below Wiki as well:
    http://wiki.sdn.sap.com/wiki/display/SAPITSM/Configuration+and+Administration+of+ITSM
    (all in one line)
    And select Configuration Guide - Application Incident Management
    Also check the External Service Desk Functionality.
    Please follow the path to the nodes listed below.
    SAP Solution Manager Implementation Guide
      SAP Solution Manager
        Capabilities (Optional)
          IT Service Management
            External Integration
                 Service Desk
                     External Service Desk
    Thanks
    Vikram

  • Error 513 while creating support message help menu in Solman system.

    Hi Expert
    I am trying to create support message though help in the Solman system. But i am getting an "error 513 message has not created in the Solution manager system".
    - maintained the BCOS_CUST table with RFC - NONE
    - have SAP ALL authorisation
    - using the transaction type SLFN for support message.
    - Check the Action profile for SLF1 and found OK.
    - Also refered some notes in the sap and implemented but still i am getting the same error.
    Please advice.
    Regards
    Kumar.

    HI
    Do u have BP existing for ur id in solman
    Use BP_GEN to create bp for ur user id
    otherwise using BP tcode and check if the identification tab is carrying details for solman system with curent client and userid
    Hope it solv ur prb
    Regards
    Prakhar

  • Bacground job cancelled in Solman system.

    Hi experts,
    Two bacground job cancelled in Solman system.
    1. SM:SELFDIAGNOSIS
    Job started
    Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000001018, user ID SAP*)
    ABAP/4 processor: MOVE_TO_LIT_NOTALLOWED_NODATA
    Job cancelled
    2.SM:SYNC SAP SESSIONS
    Job started
    Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000001018, user ID SAP*)
    Your user has no SAP Support Portal user assigned
    Job cancelled after system exception ERROR_MESSAGE
    Please give me the soltuin to fix it.
    Regards,

    Hi Vivek,
    1). Adobe forms (TCode SFP) offers a feature where you can pass the value of the table instead of table iteself. For this yuo have to go to SFP > INTERFACE > Interface (Tab) >(Click on) Import
    Here, you should see all the parameters listed. On the parameter that you want to meddle with, tick the "Pass Value" checkbox. This solved the issue and prevented the dump.
    Exception MOVE_TO_LIT_NOTALLOWED_NODATA
    Refer to the  Note 834318 ...
    2). please maintain the your S - user id in AISUSER t-code. Refer to below link for screenshots.
    http://wiki.sdn.sap.com/wiki/display/SM/HowtomaintainthetransactionAISUSERforstandardandVARscenarios
    Regards,
    Arjun
    Edited by: Arjun Venkateswarlu. on Jan 12, 2012 9:35 PM

  • How many SLD's require for 2 solman system requirements?

    Scenario1:
    One solman system for entire landscape->One SLD is required.
    Is this SLD should be a seperate system or can be within solman?
    Scenario2:
    One solman system for DEV/QAS and other solman system for PRD.
    How many SLDs are required? Can we manage with single SLD?
    If two SLDs, Then both should be seperate systems. i.e, One SLD -> DEV/QAS Solman, Another SLD ->PRD Solman.
    If only one SLD, Then it should be seperate system or can be within solman?
    We do have EP in client enviroinment. Can we use SLD of EP?

    Hi,
    you can use one SLD for all your systems if you want. You can either use an existing one or the one which comes with Sol Man. That's up to you.
    Any scenario is possible.
    /cheers

  • In my solman system , DBACOCKPIT , "SLD System Import" tab is inactive

    Dear All,
    My SOLMAN system has SAP_BASIS 702 0012 and ST 710 0008
    In DBACOCKPIT "SLD System Import" tab is inactive.
    Please let me know if there is a way to make this tab active , and execute  "SLD System Import" in DBA cockpit
    Let me know in case you need more details
    Thanks & Regards,
    Sudhir

    Hi Sudir,
    No, you have not selected the dedicated system. Still you are in overview page.
    It is saying active 53, inactive 5.
    You select the system from the left panel. I am not sure where it is in your screen, But Try in SAP GUI as below
    Thanks
    Jansi

  • Need informaiton on upgarde solman system from 7.0 to 7.1

    Hi Experts ,
    Iam new to upgrade in Secuirty. Currently we are doing upgrade for Solman system from 7.0  to 7.1. Can you please help me how we can approach on this from Secuirty perspective.
    Thanks,
    Sudhakar.

    This will be upgrade and if you read the upgrade guide (http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000735220&_SCENARIO=01100035870000000202&) Point 5) then I am sure you will understand the upgrade process. If you still have any queries then please update.

  • SolMan 7.1 Setup Monitoring - Custom Template is not display to Assign

    Hi All,
    SAP Solution Manager Configuration: Technical Monitoring - System Monitoring
    While creating custom template, i am facing issue, Please check it out below screens,
    After done, all setup, the custom template should display to apply and active.But it is not displaying
    This is the error msg below,
    Please help me out
    Regards
    Jay

    Hello Jagadish,
    thanks for your support.
    I went with Visual Admin tool to node SID - Server - Services - SLD Data Supplier.
    I saw some information - how can I check here?
    Afterwards I went to node SID - Server - Services - JCo RFC Provider and saw informations about client, user password. How can I check these informations? I stopped the SAPSLDAPI_SID RFC listener and started again. This worked without problems.
    I closed visual administrator and tried to login again via http://hostname:50000/sld. After cklick on button "Administration" there is no reaction - I get a blank site with no information on it.
    When I start configuration again through SOLMAN_ADMIN system hangs now in step 107 " SLD Server Configuration".
    Regards,
    Julia
    Edited by: Julia Bayrhammer on Oct 26, 2011 9:04 AM

  • Steps to configure Solution Monitoring for Satellite Syst.

    Hi Experts,
    I am using my friend's ID for posting my query.
    I need to configure Solution monitoring of different Satellite Systems in our Solution Manager server.
    Could you please give me the steps for configuring the same.
    Please help.
    Thanks in advance,
    Sandeep.

    Sandeep,
    You will get good documentation & tutor files from https://websmp206.sap-ag.de/ -> Knowledge Exchange,Solution Manager -> Solution Manager 4.0.
    Hope this will help.If not please let me know.
    Regards,
    Cherry

Maybe you are looking for