Solution for 0x80070035 Error When Connecting to Non-Windows Shares

My situation:
Using Windows 7 64-bit OS I needed to connect to two Haas mills. Both Haas machines have internal hard drives that have been shared and made available to the network. Using Windows XP we were able to map drives or create shortcuts that pointed
to these shares. When we tried connecting to the shares with Windows 7 we received the error "Windows cannot access \\servername\sharename." Looking at the details of the error I found the error number 0x80070035.
The solution was found in another forum:
"On your “file server,” what is the underlying OS? If it is a Linux based OS that uses Samba or CIFS to share out to Windows clients, you may need to adjust your NTLM authentication properties.
At the Start menu search dialog box, type secpol.msc. Navigate to Local Policies >> Security Options.
Go down to Network security: LAN Manager authentication level and first read the Explain tab.
Then go ahead and change the authentication level to Send LM & NTLM - use NTLMv2 session security if negotiated.
If this fails to work, make sure you set your authentication properties back to the default level."
Once I made the registry change, the shared areas were accessible.

Hi,
This could be an issue if the security software is interfering with the connection.
You may temporarily try to disable the security software and check what happens.
Also change the Windows Firewall settings and check if that is causing the issue.
The error code 0x80070035 indicates that the network path is not found.
This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
1.Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2.Right click on the connection that you use for the local connection, and then click "Properties".
3.Click Continue button to verify the administrator permission.
4.Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5.Click "Advanced" button in the open window.
On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
Thanks.

Similar Messages

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Error when connecting to terminal

Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.

Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP

Solution for iTunes error 0x80092013

Hello everybody!
You receive this error when you try to log in to your account iTunes or try to get access to iTunes Store.
I found a solution for this error.
Try these instructions, and if it helps, please write about it here. Thank you!
1. Disable updating Windows.
2. Open a command line as administrator.
3. Enter this command: "wusa.exe /uninstall /kb:2872339"
4. Restart your computer.
5. Open a command line as administrator again.
6. Enter this command: "wusa.exe /uninstall /kb:2882822"
7. Restart your computer.
And try to log in to your iTunes.
I hope it will help you!

Hi, chau.satish.
Thank you for visiting Apple Support Communities.
I understand that you are receiving error 11556 when attempting to connect to the iTunes Store. Here are the steps for this specific error that I would suggest going through.
"Error 11556"
This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
If the above steps do not resolve the issue, make sure that the iTunes Store is not disabled in Parental controls.
Use Parental Controls in iTunes to set content restrictions
-Jason H.

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
http://docs.info.apple.com/article.html?artnum=301580
A user meet the above problem connecting to Windows 2003 server but have no this error if connected to Windows 2000 Server.
According to the above solution, will you configure Windows 2003 server or just configure user's Macintosh platform?

EL2006 wrote:
Actually, win2003 server's default security options are shown as follows.
1. MS network client: Digitally sign communications (always) - Disabled
2. MS network client: Digitally sign communications (if server agrees) - Enabled
3. MS network server: Digitally sign communications (always) - Disabled
4. MS network server: Digitally sign communications (if client agrees) - Disabled
We could both be right on this one; it depends on your setup. By default, if you're running a domain then the Domain Controller is:
*Microsoft network client: Digitally sign communications (always) Policy Setting: not defined*
That defaults to the Group Policy setting, which is enabled.
The local computer group policy for Windows Server 2003 is:
*Microsoft network client: Digitally sign communications (always) Security Setting: disabled*
I'm referencing this KB article on Microsoft's website: <http://support.microsoft.com/kb/887429>.
This does not take into consideration that you may have upgraded from Windows 2000 Server to Windows Server 2003.
Regardless, you seem to have already eliminated this as a possibility as you mention below.
In my case, user can connect to win2003 server without problem in the same LAN 192.168.8.x. If connect it from remote lan 192.168.10.x (e.g. smb://192.168.8.250/artwork) error -36 will appear. Since remote lan is connected to local lan by secured VPN, all traffic or any ports are allowed to passe through VPN.
Rather than a server or client problem I would speculate your VPN connection is the problem. Do you have port TCP 445 open or blocked at your VPN concentrator? I believe this needs to be open.
Hope this helps!
bill

4.0EA1 Diff Carts Unable to compare carts when connected as non-owner

Unable to compare carts when connected as non-owner.
Background:
We have 2 identical environments and I want to compare their objects. I login as user3 with select_catalog_role
Steps:
Connect as user3 then populate two carts. One selecting tables from schema1 another cart selecting tables from schema2. Now run Diff Carts.
Behavior:
Text field for Connection is disabled: When there are 2 carts loaded Diff Carts does not allows to compare to Connection. This field remains disabled even when one of the cart tab is closed and Diff Carts is started again.
Unable to compare: Diffing with another cart has connection issues. Diff report shows error (table icon with exclamation mark).
For Schema1 it says
<schema1>.<table_name> using null connection.
Unable to compare objects.
Ensure that you have the required permissions.
You must own the objects or have select_catalog_role.
For schema2 it says
<user3>.<table_name> using null connection.
It is trying to find table for user3 although owner is schema2 in cart2

I am able to reproduce your issues with the diff from cart ui and have filed a bug and identified a fix for it. The issue is that if the combo box is disabled, it remains disabled and the only way to get it enabled again is to restart sqldev.
When diffing between two carts, the connection that is used for the add to cart is used for the authorization so if you add it to the cart from user3, user3 will be used for permissions. This is the intended behavior. have also filed a bug for the error message with "null" for the connection.

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

When deploy: Wizard error a connection to the deployment share could not be made "check physical connection"

Hello everybody,
yet another issue with deploying a masterdisk. I will give you a short explanation of the situation.
I need to deploy Windows 8.1 PRO x86.
Using: Microsoft Deployment Workbench Microsoft Version: 6.2.5019.0
1. Reference PC: Windows 8.1 PRO x86 is installed on ORACLE Virtual Box.
2. I installed MDT on my workstation Windows 7 x64, where "C:\DeploymentShare\Windows8" is located.
3. To change the Unattended.xml file, I have second ORACLE Virtual Box with
Windows 8.1 PRO x86 with MDT, which connected to the DeploymentShare of Windows 7 x64.
- The reason is because the Reference PC is x86 and the Unattended.xml file can be changed only if MDT is installed on x86 Windows, otherwise it is not possible.
The image capture is successful.
Then I create bootable USB device using rufus-1.4.12.exe. I use: C:\DeploymentShare\Windows8\Boot\LiteTouchPE_x86.iso
I use a real PC (not virtual machine) and when the deployment starts
I see:
1 Welcome screen, where I select: Run the deployment wizard to install a new operating system.
2. The next screen is an error screen where I see the error:
"Wizard error
A connection to the deployment share (\\ComputerName\C\DeployemntShare )could not be made
DHCP Lease was not obtained for any Networking devices!
Possible cause: Check physical connection
I am relatively new with MDT.
Any suggestions are more than welcome.

Nick,
Thank you for the answer!
Yesterday, I figured out that I need to create an offline bootable disk.
The issue is caused, because creating a bootable disk with rufus.exe include only the ISO file and not the WIM file. That is the reason why during OS installation process it asks me for the shared folder...

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

Error when connecting to system

Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
Markus

Hello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

Solution for 0x80070035 Error When Connecting to Non-Windows Shares

Similar Messages

Maybe you are looking for