[solved] Arch freezes before login

Question

Hello there,
today I restarted my computer after about 4 days uptime to clean the dust and reconnect my DVD derive. For this I removed my radeon graphics card and a usb device I didn't need.
After cleaning and reconnecting everything I tried to start my computer. My BIOS didn't let me and told me that my hard disk drive was failing and I should back it up and insert a 'proper' boot medium. I didn't really believe it because not so a long time ago I checked this device and it was completly fine. I disconnected the DVD drive and indeed my BIOS let me pass without any trouble.
But now Arch boots to the login shell and just freezes. I only get enough time to enter the first few letters of my username. Before the boot screen clears for the login screen I always get a glance on a error about my graphics card (a radeon hd 6850, I use the radeon driver) and another device and that they are initialized in a generic mode or something. Couldn't find anything in the logs about that.
Here are they and I hope someone is able to help:
errors.log;
Apr 10 11:00:32 localhost kernel: [13239.127128] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 11:00:32 localhost kernel: [13239.230302] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 11:00:32 localhost kernel: [13239.333550] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 11:29:11 localhost /usr/sbin/crond[757]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Apr 10 11:29:12 localhost kernel: [ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
Apr 10 11:29:13 localhost dhcpcd[661]: eth0: sendmsg: Cannot assign requested address
Apr 10 11:39:02 localhost kernel: [ 600.497461] sd 6:0:0:0: [sdb] No Caching mode page present
Apr 10 11:39:02 localhost kernel: [ 600.497466] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Apr 10 11:39:02 localhost kernel: [ 600.500091] sd 6:0:0:0: [sdb] No Caching mode page present
Apr 10 11:39:02 localhost kernel: [ 600.500095] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Apr 10 11:39:02 localhost kernel: [ 600.656186] sd 6:0:0:0: [sdb] No Caching mode page present
Apr 10 11:39:02 localhost kernel: [ 600.656190] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Apr 10 15:41:56 localhost kernel: [ 5876.442283] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 15:41:56 localhost kernel: [ 5876.544457] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 15:41:56 localhost kernel: [ 5876.647780] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 23:27:41 localhost kernel: [16940.661233] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 23:27:41 localhost kernel: [16940.766765] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 10 23:27:41 localhost kernel: [16940.869935] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 17:21:00 localhost kernel: [20588.434135] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 17:21:00 localhost kernel: [20588.435869] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 17:21:00 localhost kernel: [20588.539596] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 19:02:41 localhost kernel: [25592.893677] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 19:02:41 localhost kernel: [25592.995809] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 19:02:41 localhost kernel: [25593.099094] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 11 19:05:39 localhost ata_id[12267]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
Apr 11 19:07:59 localhost kernel: [25917.827291] sd 8:0:0:0: [sdc] No Caching mode page present
Apr 11 19:07:59 localhost kernel: [25917.827295] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Apr 11 19:07:59 localhost kernel: [25917.830813] sd 8:0:0:0: [sdc] No Caching mode page present
Apr 11 19:07:59 localhost kernel: [25917.830817] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Apr 11 19:07:59 localhost kernel: [25917.906660] sd 8:0:0:0: [sdc] No Caching mode page present
Apr 11 19:07:59 localhost kernel: [25917.906664] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Apr 11 19:31:46 localhost ata_id[23321]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
Apr 11 19:31:48 localhost ata_id[23349]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
Apr 11 19:31:49 localhost ata_id[23358]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
Apr 12 10:31:46 localhost kernel: [41074.655485] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 10:31:46 localhost kernel: [41074.757712] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 10:31:46 localhost kernel: [41074.860847] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 17:27:02 localhost kernel: [43038.005295] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 17:27:02 localhost kernel: [43038.107420] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 17:27:02 localhost kernel: [43038.210662] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 18:03:40 localhost kernel: [45244.094026] hub 6-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
Apr 12 22:57:48 localhost kernel: [46996.101540] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 22:57:48 localhost kernel: [46996.203669] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 12 22:57:48 localhost kernel: [46996.306895] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 06:48:04 localhost kernel: [49544.131279] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 06:48:04 localhost kernel: [49544.233392] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 06:48:04 localhost kernel: [49544.234948] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 10:22:52 localhost kernel: [50732.517856] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 10:22:52 localhost kernel: [50732.620028] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 10:22:52 localhost kernel: [50732.723191] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 10:24:40 localhost kernel: [50848.424796] sd 9:0:0:0: [sdb] No Caching mode page present
Apr 13 10:24:40 localhost kernel: [50848.424800] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Apr 13 10:24:40 localhost kernel: [50848.427413] sd 9:0:0:0: [sdb] No Caching mode page present
Apr 13 10:24:40 localhost kernel: [50848.427417] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Apr 13 10:24:40 localhost kernel: [50848.515912] sd 9:0:0:0: [sdb] No Caching mode page present
Apr 13 10:24:40 localhost kernel: [50848.515916] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Apr 13 19:52:08 localhost kernel: [81867.864800] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 19:52:08 localhost kernel: [81867.966901] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 13 19:52:08 localhost kernel: [81868.070164] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 03:47:04 localhost kernel: [88628.314034] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 03:47:04 localhost kernel: [88628.416250] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 03:47:04 localhost kernel: [88628.522848] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 16:52:01 localhost kernel: [88690.920669] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 16:52:01 localhost kernel: [88690.922415] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Apr 14 16:52:01 localhost kernel: [88690.924031] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
pacman.log
[2012-04-10 11:46] Running 'pacman-color -Syu'
[2012-04-10 11:46] synchronizing package lists
[2012-04-10 11:46] starting full system upgrade
[2012-04-10 11:46] upgraded akonadi (1.7.1-1 -> 1.7.2-1)
[2012-04-10 11:46] upgraded arch-wiki-docs (20111219-1 -> 20120410-1)
[2012-04-10 11:46] upgraded girara-common (0.1.1-1 -> 0.1.2-1)
[2012-04-10 11:46] upgraded girara-gtk2 (0.1.1-1 -> 0.1.2-1)
[2012-04-10 11:47] upgraded gparted (0.12.0-2 -> 0.12.1-1)
[2012-04-10 11:47] unregistering X11-1.5.0.1 would break the following packages: xmonad-0.10 (ignoring)
[2012-04-10 11:47] Reading package info from stdin ... done.
[2012-04-10 11:47] --read-interface=array-0.4.0.0,array-0.4.0.0/array.haddock --read-interface=base-4.5.0.0,base-4.5.0.0/base.haddock --read-interface=binary-0.5.1.0,binary-0.5.1.0/binary.haddock --read-interface=bin-package-db-0.0.0.0,bin-package-db-0.0.0.0/bin-package-db.haddock --read-interface=bytestring-0.9.2.1,bytestring-0.9.2.1/bytestring.haddock --read-interface=Cabal-1.14.0,Cabal-1.14.0/Cabal.haddock --read-interface=containers-0.4.2.1,containers-0.4.2.1/containers.haddock --read-interface=deepseq-1.3.0.0,deepseq-1.3.0.0/deepseq.haddock --read-interface=directory-1.1.0.2,directory-1.1.0.2/directory.haddock --read-interface=extensible-exceptions-0.1.1.4,extensible-exceptions-0.1.1.4/extensible-exceptions.haddock --read-interface=filepath-1.3.0.0,filepath-1.3.0.0/filepath.haddock --read-interface=ghc-prim-0.2.0.0,ghc-prim-0.2.0.0/ghc-prim.haddock --read-interface=haskell2010-1.1.0.1,haskell2010-1.1.0.1/haskell2010.haddock --read-interface=haskell98-2.0.0.1,haskell98-2.0.0.1/haskell98.haddock --read-interface=hoopl-3.8.7.3,hoopl-3.8.7.3/hoopl.haddock --read-interface=hpc-0.5.1.1,hpc-0.5.1.1/hpc.haddock --read-interface=integer-gmp-0.4.0.0,integer-gmp-0.4.0.0/integer-gmp.haddock --read-interface=mtl,mtl/mtl.haddock --read-interface=old-locale-1.0.0.4,old-locale-1.0.0.4/old-locale.haddock --read-interface=old-time-1.1.0.0,old-time-1.1.0.0/old-time.haddock --read-interface=pretty-1.1.1.0,pretty-1.1.1.0/pretty.haddock --read-interface=process-1.1.0.1,process-1.1.0.1/process.haddock --read-interface=syb,syb/syb.haddock --read-interface=template-haskell-2.7.0.0,template-haskell-2.7.0.0/template-haskell.haddock --read-interface=time-1.4,time-1.4/time.haddock --read-interface=transformers,transformers/transformers.haddock --read-interface=unix-2.5.1.0,unix-2.5.1.0/unix.haddock --read-interface=utf8-string,utf8-string/utf8-string.haddock --read-interface=X11,X11/X11.haddock
[2012-04-10 11:47] upgraded haskell-x11 (1.5.0.1-2 -> 1.5.0.1-3)
[2012-04-10 11:47] upgraded mpd (0.16.7-3 -> 0.16.8-2)
[2012-04-10 11:47] upgraded zathura (0.1.1-4 -> 0.1.2-1)
[2012-04-10 15:58] Running 'pacman-color -Syu'
[2012-04-10 15:58] synchronizing package lists
[2012-04-10 15:59] starting full system upgrade
[2012-04-10 15:59] upgraded vim-runtime (7.3.475-1 -> 7.3.495-1)
[2012-04-10 15:59] upgraded gvim (7.3.475-1 -> 7.3.495-1)
[2012-04-10 16:22] Running 'pacman-color -Syu'
[2012-04-10 16:22] synchronizing package lists
[2012-04-10 16:22] starting full system upgrade
[2012-04-11 00:27] Running 'pacman-color -Syu'
[2012-04-11 00:27] synchronizing package lists
[2012-04-11 00:27] starting full system upgrade
[2012-04-11 00:28] upgraded libpciaccess (0.13-1 -> 0.13.1-1)
[2012-04-11 00:28] upgraded lib32-libpciaccess (0.13-1 -> 0.13.1-1)
[2012-04-11 00:28] upgraded xorg-server-common (1.12.0.901-1 -> 1.12.0.902-1)
[2012-04-11 00:28] upgraded xorg-server (1.12.0.901-1 -> 1.12.0.902-1)
[2012-04-11 17:24] Running 'pacman-color -Syu'
[2012-04-11 17:24] synchronizing package lists
[2012-04-11 17:25] Running 'pacman-color -Syu'
[2012-04-11 17:25] synchronizing package lists
[2012-04-11 17:25] Running 'pacman-color -Rns gcc-libs-multilib'
[2012-04-11 17:25] Running 'pacman-color -Syu gcc-libs'
[2012-04-11 17:25] synchronizing package lists
[2012-04-11 17:26] Running 'pacman-color -S pacman'
[2012-04-11 17:26] upgraded pacman (4.0.2-1 -> 4.0.3-1)
[2012-04-11 17:26] Running 'pacman-color -Syu'
[2012-04-11 17:26] synchronizing package lists
[2012-04-11 17:26] starting full system upgrade
[2012-04-11 17:26] Users no longer need to be in the 'camera' group to use camera devices
[2012-04-11 17:26] upgraded libgphoto2 (2.4.13-1 -> 2.4.13-2)
[2012-04-11 17:26] upgraded ntfs-3g (2012.1.15-1 -> 2012.1.15-2)
[2012-04-11 17:26] upgraded perl-list-moreutils (0.33-1 -> 0.33-2)
[2012-04-11 17:26] Updating vim help tags...done.
[2012-04-11 17:26] upgraded vim-bufexplorer (7.2.8-4 -> 7.2.8-5)
[2012-04-11 17:26] upgraded vim-colorsamplerpack (8.03-2 -> 8.03-3)
[2012-04-11 17:26] upgraded vim-doxygentoolkit (0.2.13-1 -> 0.2.13-2)
[2012-04-11 17:40] Running 'pacman-color -Syu'
[2012-04-11 17:40] synchronizing package lists
[2012-04-11 17:40] starting full system upgrade
[2012-04-11 17:41] Running 'pacman -U /home/jonas/opera-next/opera-next-12.00_1362-1-x86_64.pkg.tar.xz'
[2012-04-11 17:41] upgraded opera-next (12.00_1359-1 -> 12.00_1362-1)
[2012-04-11 20:56] Running 'pacman-color -Syu'
[2012-04-11 20:56] synchronizing package lists
[2012-04-11 20:56] starting full system upgrade
[2012-04-11 20:58] upgraded lib32-gcc-libs (4.7.0-3 -> 4.7.0-4)
[2012-04-11 20:58] upgraded gcc-libs-multilib (4.7.0-3 -> 4.7.0-4)
[2012-04-11 20:58] upgraded gcc-multilib (4.7.0-3 -> 4.7.0-4)
[2012-04-11 20:58] upgraded vimpager (1.6.7-1 -> 1.6.8-1)
[2012-04-11 21:09] Running 'pacman-color -Syu'
[2012-04-11 21:09] synchronizing package lists
[2012-04-11 21:09] starting full system upgrade
[2012-04-11 21:11] Running 'pacman -U /home/jonas/pacman-color-testing/pacman-color-testing-4.0.3-1-x86_64.pkg.tar.xz'
[2012-04-11 21:11] upgraded pacman-color-testing (4.0.2-1 -> 4.0.3-1)
[2012-04-12 17:46] Running 'pacman -S --asdeps libqtgtl libpqxx freetds fftw libspnav automoc4 boost cmake eigen pstoedit libwpg create-svn libgsf'
[2012-04-12 17:46] Running 'pacman -S --asdeps llvm opengtl'
[2012-04-12 17:47] installed llvm (3.0-2)
[2012-04-12 17:47] installed opengtl (0.9.16-1)
[2012-04-12 17:47] Running 'pacman -S --asdeps cmake'
[2012-04-12 17:48] installed cmake (2.8.7-2)
[2012-04-12 17:48] Running 'pacman -U /home/jonas/calligra-filters-git/libqtgtl/libqtgtl-0.9.2-1-x86_64.pkg.tar.xz'
[2012-04-12 18:07] installed libqtgtl (0.9.2-1)
[2012-04-12 18:07] Running 'pacman -S --asdeps libpqxx freetds fftw libspnav automoc4 boost eigen pstoedit libwpg create-svn libgsf'
[2012-04-12 18:08] Running 'pacman -U /home/jonas/calligra-filters-git/libspnav/libspnav-0.2.2-2-x86_64.pkg.tar.xz'
[2012-04-12 18:12] installed libspnav (0.2.2-2)
[2012-04-12 18:26] Running 'pacman -S --asdeps libpqxx freetds fftw automoc4 boost eigen pstoedit libwpg create-svn libgsf'
[2012-04-12 18:26] Running 'pacman-color -Syu'
[2012-04-12 18:26] synchronizing package lists
[2012-04-12 18:26] starting full system upgrade
[2012-04-12 18:31] upgraded consolekit (0.4.5-2 -> 0.4.6-1)
[2012-04-12 18:31] upgraded libwbclient (3.6.3-4 -> 3.6.4-1)
[2012-04-12 18:31] upgraded mkinitcpio (0.8.6-2 -> 0.8.7-1)
[2012-04-12 18:31] upgraded smbclient (3.6.3-4 -> 3.6.4-1)
[2012-04-12 18:31] upgraded transmission-cli (2.50-1 -> 2.51-1)
[2012-04-12 18:31] upgraded udev (181-9 -> 182-1)
[2012-04-13 11:31] Running 'pacman-color -D --asdeps libqtgtl libspnav'
[2012-04-13 11:35] Running 'pacman -S --asdeps sdl_image'
[2012-04-13 11:35] installed sdl_image (1.2.12-2)
[2012-04-13 11:38] Running 'pacman -U /home/jonas/flare-rpg/flare-rpg-0.15.1-2-x86_64.pkg.tar.xz'
[2012-04-13 11:40] installed flare-rpg (0.15.1-2)
[2012-04-13 13:49] Running 'pacman-color -Syu rtorrent'
[2012-04-13 13:49] synchronizing package lists
[2012-04-13 13:49] starting full system upgrade
[2012-04-13 13:49] installed libtorrent (0.12.9-1)
[2012-04-13 13:49] installed xmlrpc-c (1:1.29.2-1)
[2012-04-13 13:49] installed rtorrent (0.8.9-2)
[2012-04-13 13:49] upgraded consolekit (0.4.6-1 -> 0.4.6-2)
[2012-04-13 13:49] upgraded flashplugin (11.2.202.228-1 -> 11.2.202.233-1)
[2012-04-13 13:49] upgraded libmysqlclient (5.5.22-1 -> 5.5.23-1)
[2012-04-13 13:49] upgraded mysql-clients (5.5.22-1 -> 5.5.23-1)
[2012-04-13 13:49] upgraded mysql (5.5.22-1 -> 5.5.23-1)
[2012-04-13 13:51] Running 'pacman-color -Rns rtorrent'
[2012-04-13 13:51] removed rtorrent (0.8.9-2)
[2012-04-13 13:51] removed xmlrpc-c (1:1.29.2-1)
[2012-04-13 13:51] removed libtorrent (0.12.9-1)
[2012-04-13 13:55] Running 'pacman -U /home/jonas/transmission-gtk2/transmission-gtk2-2.51-1-x86_64.pkg.tar.xz'
[2012-04-13 13:55] installed transmission-gtk2 (2.51-1)
[2012-04-13 13:56] Running 'pacman-color -Rns transmission-cli'
[2012-04-13 13:56] removed transmission-cli (2.51-1)
[2012-04-13 16:32] Running 'pacman-color -Syu'
[2012-04-13 16:32] synchronizing package lists
[2012-04-13 16:32] starting full system upgrade
[2012-04-13 18:27] Running 'pacman-color -Scc'
[2012-04-13 18:27] Running 'pacman-color -Sc'
[2012-04-13 18:32] Running 'pacman-color -Rns 0ad'
[2012-04-13 18:32] removed 0ad (a9-1)
[2012-04-13 18:32] removed gamin (0.1.10-6)
[2012-04-13 18:32] removed enet (1.3.3-2)
[2012-04-13 18:32] removed 0ad-data (a9-1)
[2012-04-13 18:32] Running 'pacman-color -Sc'
[2012-04-14 18:14] Running 'pacman-color -Syu'
[2012-04-14 18:14] synchronizing package lists
[2012-04-14 18:14] starting full system upgrade
[2012-04-14 18:14] upgraded dbus-core (1.4.16-1 -> 1.4.20-2)
[2012-04-14 18:14] upgraded dbus (1.4.16-1 -> 1.4.20-1)
[2012-04-14 18:14] upgraded dbus-python (0.84.0-1 -> 1.0.0-1)
[2012-04-14 18:14] upgraded garcon (0.1.11-1 -> 0.1.12-1)
[2012-04-14 18:14] upgraded mkinitcpio (0.8.7-1 -> 0.8.7-2)
[2012-04-14 18:14] upgraded qt (4.8.1-1 -> 4.8.1-2)
[2012-04-14 18:15] upgraded wine (1.5.1-1 -> 1.5.2-1)
[2012-04-14 18:15] upgraded xorg-server-common (1.12.0.902-1 -> 1.12.1-1)
[2012-04-14 18:15] upgraded xorg-server (1.12.0.902-1 -> 1.12.1-1)
dmesg;
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT Tue Apr 3 06:46:17 UTC 2012
[ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3205 06/07/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000430000000 aka 17152M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 0430000000 page 2M
[ 0.000000] kernel direct mapping tables up to 430000000 @ cfe8e000-cfe90000
[ 0.000000] RAMDISK: 37d2b000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cfe90000 0003C (v01 060710 RSDT1948 20100607 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 060710 FACP1948 20100607 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120111/tbfadt-579)
[ 0.000000] ACPI: DSDT 00000000cfe90450 0E856 (v01 A1160 A1160000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 060710 APIC1948 20100607 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 060710 OEMMCFG 20100607 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 060710 OEMB1948 20100607 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cfe9f450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfe9f540 00038 (v01 060710 OEMHPET 20100607 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-430000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,430000000) -> [0,430000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000
[ 0.000000] NODE_DATA [000000042fffb000 - 000000042fffffff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00430000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00430000
[ 0.000000] On node 0 totalpages: 4193823
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831184 pages, LIFO batch:31
[ 0.000000] Normal zone: 52224 pages used for memmap
[ 0.000000] Normal zone: 3290112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s82176 r8192 d24320 u262144
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125210
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 16366888k/17563648k available (4507k kernel code, 788356k absent, 408404k reserved, 4315k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3210.762 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.08 BogoMIPS (lpj=10702540)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003356] Security Framework initialized
[ 0.003360] AppArmor: AppArmor disabled by boot time parameter
[ 0.004359] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009978] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011818] Mount-cache hash table entries: 256
[ 0.011918] Initializing cgroup subsys cpuacct
[ 0.011920] Initializing cgroup subsys memory
[ 0.011926] Initializing cgroup subsys devices
[ 0.011928] Initializing cgroup subsys freezer
[ 0.011929] Initializing cgroup subsys net_cls
[ 0.011931] Initializing cgroup subsys blkio
[ 0.011952] tseg: 0000000000
[ 0.011963] CPU: Physical Processor ID: 0
[ 0.011964] CPU: Processor Core ID: 0
[ 0.011966] mce: CPU supports 6 MCE banks
[ 0.012513] ACPI: Core revision 20120111
[ 0.016673] ftrace: allocating 17413 entries in 69 pages
[ 0.023719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058830] CPU0: AMD Phenom(tm) II X4 840 Processor stepping 03
[ 0.059996] Performance Events: AMD PMU driver.
[ 0.059996] ... version: 0
[ 0.059996] ... bit width: 48
[ 0.059996] ... generic registers: 4
[ 0.059996] ... value mask: 0000ffffffffffff
[ 0.059996] ... max period: 00007fffffffffff
[ 0.059996] ... fixed-purpose events: 0
[ 0.059996] ... event mask: 000000000000000f
[ 0.076711] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103360] Booting Node 0, Processors #1
[ 0.103363] smpboot cpu 1: start_ip = 9a000
[ 0.116684] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136704] #2
[ 0.136706] smpboot cpu 2: start_ip = 9a000
[ 0.150015] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.170030] #3
[ 0.170032] smpboot cpu 3: start_ip = 9a000
[ 0.183357] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.190007] Brought up 4 CPUs
[ 0.190010] Total of 4 processors activated (25696.35 BogoMIPS).
[ 0.190521] devtmpfs: initialized
[ 0.191849] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
[ 0.191849] NET: Registered protocol family 16
[ 0.191849] node 0 link 0: io port [1000, ffffff]
[ 0.191849] TOM: 00000000d0000000 aka 3328M
[ 0.191849] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.191849] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.191849] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.191849] node 0 link 0: mmio [a0000, bffff]
[ 0.191849] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.191849] TOM2: 0000000430000000 aka 17152M
[ 0.191849] bus: [00, 07] on node 0 link 0
[ 0.191849] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.191849] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.191849] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.191849] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.191849] bus: 00 index 4 [mem 0x430000000-0xfcffffffff]
[ 0.191849] ACPI: bus type pci registered
[ 0.191849] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.191849] PCI: not using MMCONFIG
[ 0.191849] PCI: Using configuration type 1 for base access
[ 0.191849] PCI: Using configuration type 1 for extended access
[ 0.191849] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.191849] mtrr: probably your BIOS does not setup all CPUs.
[ 0.191849] mtrr: corrected configuration.
[ 0.193356] bio: create slab <bio-0> at 0
[ 0.193359] ACPI: Added _OSI(Module Device)
[ 0.193359] ACPI: Added _OSI(Processor Device)
[ 0.193359] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193359] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.194088] ACPI: EC: Look up EC in DSDT
[ 0.195267] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.263709] ACPI: Interpreter enabled
[ 0.263714] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.263732] ACPI: Using IOAPIC for interrupt routing
[ 0.263752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.264484] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.284239] ACPI: No dock devices found.
[ 0.284239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.284239] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.284239] PCI host bridge to bus 0000:00
[ 0.284239] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.284239] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.284239] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
[ 0.284239] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.284246] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.284258] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.284295] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.284329] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.284346] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
[ 0.284380] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.284393] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.284426] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.284455] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.284474] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.284484] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.284493] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.284502] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.284512] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.284521] pci 0000:00:11.0: reg 24: [mem 0xfbcfe400-0xfbcfe7ff]
[ 0.284541] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.284589] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.284602] pci 0000:00:12.0: reg 10: [mem 0xfbcf6000-0xfbcf6fff]
[ 0.284667] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.284680] pci 0000:00:12.1: reg 10: [mem 0xfbcf7000-0xfbcf7fff]
[ 0.284750] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.284769] pci 0000:00:12.2: reg 10: [mem 0xfbcfe800-0xfbcfe8ff]
[ 0.284853] pci 0000:00:12.2: supports D1 D2
[ 0.284854] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.284878] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.284891] pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
[ 0.284956] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.284969] pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
[ 0.285039] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.285058] pci 0000:00:13.2: reg 10: [mem 0xfbcfec00-0xfbcfecff]
[ 0.285142] pci 0000:00:13.2: supports D1 D2
[ 0.285143] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.285169] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.286657] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.286673] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.286682] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.286691] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.286701] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.286710] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.286768] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.286789] pci 0000:00:14.2: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit]
[ 0.286856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.286871] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.286948] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.286990] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.287003] pci 0000:00:14.5: reg 10: [mem 0xfbcff000-0xfbcfffff]
[ 0.287071] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.287088] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.287101] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.287115] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.287132] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.287184] pci 0000:04:00.0: [1002:6739] type 0 class 0x000300
[ 0.287198] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.287209] pci 0000:04:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit]
[ 0.287216] pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.287230] pci 0000:04:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
[ 0.287263] pci 0000:04:00.0: supports D1 D2
[ 0.287285] pci 0000:04:00.1: [1002:aa88] type 0 class 0x000403
[ 0.287299] pci 0000:04:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.287363] pci 0000:04:00.1: supports D1 D2
[ 0.293342] pci 0000:00:02.0: PCI bridge to [bus 04-04]
[ 0.293347] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.293350] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.293353] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.293404] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.293419] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.293443] pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.293470] pci 0000:03:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.293533] pci 0000:03:00.0: supports D1 D2
[ 0.293535] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.293557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.293564] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.293567] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.293569] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.293618] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
[ 0.293647] pci 0000:02:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit]
[ 0.293662] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.293790] pci 0000:02:00.0: supports D2
[ 0.293792] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.300012] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.300017] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.300019] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.300085] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.300095] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.300096] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.300098] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.300100] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.300101] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.300103] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.300119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.300277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.300294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.300325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.300363] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.300365] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.300366] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.303051] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.303079] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.303104] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.303127] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.303151] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.303175] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.303200] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.303224] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.303334] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303336] vgaarb: loaded
[ 0.303337] vgaarb: bridge control possible 0000:04:00.0
[ 0.303372] PCI: Using ACPI for IRQ routing
[ 0.312318] PCI: pci_cache_line_size set to 64 bytes
[ 0.312324] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.312393] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.312395] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 0.312472] NetLabel: Initializing
[ 0.312473] NetLabel: domain hash size = 128
[ 0.312474] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.312483] NetLabel: unlabeled traffic allowed by default
[ 0.312491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.312493] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.314334] Switching to clocksource hpet
[ 0.317535] pnp: PnP ACPI init
[ 0.317549] ACPI: bus type pnp registered
[ 0.317637] pnp 00:00: [bus 00-ff]
[ 0.317639] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.317640] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.317641] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.317643] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.317644] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.317646] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.317649] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.317689] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.317713] pnp 00:01: [dma 4]
[ 0.317714] pnp 00:01: [io 0x0000-0x000f]
[ 0.317716] pnp 00:01: [io 0x0081-0x0083]
[ 0.317717] pnp 00:01: [io 0x0087]
[ 0.317718] pnp 00:01: [io 0x0089-0x008b]
[ 0.317719] pnp 00:01: [io 0x008f]
[ 0.317720] pnp 00:01: [io 0x00c0-0x00df]
[ 0.317739] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.317745] pnp 00:02: [io 0x0070-0x0071]
[ 0.317753] pnp 00:02: [irq 8]
[ 0.317770] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.317774] pnp 00:03: [io 0x0061]
[ 0.317791] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.317797] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.317800] pnp 00:04: [irq 13]
[ 0.317818] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.317846] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.317864] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.317910] pnp 00:06: [io 0x0060]
[ 0.317911] pnp 00:06: [io 0x0064]
[ 0.317913] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.317914] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.317955] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.317957] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.317959] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.318069] pnp 00:07: [io 0x0010-0x001f]
[ 0.318071] pnp 00:07: [io 0x0022-0x003f]
[ 0.318072] pnp 00:07: [io 0x0062-0x0063]
[ 0.318073] pnp 00:07: [io 0x0065-0x006f]
[ 0.318074] pnp 00:07: [io 0x0072-0x007f]
[ 0.318075] pnp 00:07: [io 0x0080]
[ 0.318077] pnp 00:07: [io 0x0084-0x0086]
[ 0.318078] pnp 00:07: [io 0x0088]
[ 0.318079] pnp 00:07: [io 0x008c-0x008e]
[ 0.318080] pnp 00:07: [io 0x0090-0x009f]
[ 0.318081] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.318082] pnp 00:07: [io 0x00b1]
[ 0.318084] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.318085] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.318086] pnp 00:07: [io 0x040b]
[ 0.318087] pnp 00:07: [io 0x04d6]
[ 0.318088] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.318089] pnp 00:07: [io 0x0c14]
[ 0.318090] pnp 00:07: [io 0x0c50-0x0c51]
[ 0.318092] pnp 00:07: [io 0x0c52]
[ 0.318093] pnp 00:07: [io 0x0c6c]
[ 0.318094] pnp 00:07: [io 0x0c6f]
[ 0.318095] pnp 00:07: [io 0x0cd0-0x0cd1]
[ 0.318096] pnp 00:07: [io 0x0cd2-0x0cd3]
[ 0.318099] pnp 00:07: [io 0x0cd4-0x0cd5]
[ 0.318100] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.318101] pnp 00:07: [io 0x0cd8-0x0cdf]
[ 0.318102] pnp 00:07: [io 0x0b00-0x0b3f]
[ 0.318103] pnp 00:07: [io 0x0800-0x089f]
[ 0.318105] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.318106] pnp 00:07: [io 0x0b00-0x0b0f]
[ 0.318107] pnp 00:07: [io 0x0b20-0x0b3f]
[ 0.318108] pnp 00:07: [io 0x0900-0x090f]
[ 0.318110] pnp 00:07: [io 0x0910-0x091f]
[ 0.318111] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.318112] pnp 00:07: [io 0x0060]
[ 0.318113] pnp 00:07: [io 0x0064]
[ 0.318114] pnp 00:07: [mem 0xcff00000-0xcfffffff]
[ 0.318116] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.318117] pnp 00:07: [mem 0xfec10000-0xfec1001f]
[ 0.318176] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.318178] system 00:07: [io 0x040b] has been reserved
[ 0.318179] system 00:07: [io 0x04d6] has been reserved
[ 0.318181] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.318183] system 00:07: [io 0x0c14] has been reserved
[ 0.318184] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.318186] system 00:07: [io 0x0c52] has been reserved
[ 0.318187] system 00:07: [io 0x0c6c] has been reserved
[ 0.318189] system 00:07: [io 0x0c6f] has been reserved
[ 0.318190] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.318192] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.318194] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.318195] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.318197] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.318199] system 00:07: [io 0x0b00-0x0b3f] has been reserved
[ 0.318200] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.318202] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.318204] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.318205] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.318207] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.318209] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.318211] system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved
[ 0.318213] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.318214] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.318217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.318531] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.318535] pnp 00:08: [irq 4]
[ 0.318536] pnp 00:08: [dma 0 disabled]
[ 0.318598] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.318929] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.318930] pnp 00:09: [io 0x03f7]
[ 0.318933] pnp 00:09: [irq 6]
[ 0.318934] pnp 00:09: [dma 2]
[ 0.318969] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.319088] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.319090] pnp 00:0a: [io 0x0230-0x023f]
[ 0.319091] pnp 00:0a: [io 0x0290-0x029f]
[ 0.319092] pnp 00:0a: [io 0x0f40-0x0f4f]
[ 0.319093] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.319126] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.319127] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.319129] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.319131] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.319133] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319154] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.319183] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.319185] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319881] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.319883] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.319885] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.319886] pnp 00:0c: [mem 0x00100000-0xcfefffff]
[ 0.319887] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.319893] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.319896] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.319899] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.319901] pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.319973] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.319976] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.320068] pnp: PnP ACPI: found 13 devices
[ 0.320069] ACPI: ACPI bus type pnp unregistered
[ 0.326686] PCI: max bus depth: 1 pci_try_num: 2
[ 0.326706] pci 0000:00:02.0: PCI bridge to [bus 04-04]
[ 0.326709] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.326711] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.326714] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.326717] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.326719] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.326722] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.326725] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.326727] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
[ 0.326730] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.326733] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.326770] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.326772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.326773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.326775] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.326776] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.326778] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.326779] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.326781] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.326783] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.326784] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.326786] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.326788] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.326789] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.326791] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.326792] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.326794] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.326795] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.326797] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.326799] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.326829] NET: Registered protocol family 2
[ 0.327110] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.328540] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.330488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.330723] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.330725] TCP reno registered
[ 0.330745] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.330836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.330971] NET: Registered protocol family 1
[ 0.756738] pci 0000:04:00.0: Boot video device
[ 0.756749] PCI: CLS 64 bytes, default 64
[ 0.756788] Unpacking initramfs...
[ 0.798057] Freeing initrd memory: 2836k freed
[ 0.800187] PCI-DMA: Disabling AGP.
[ 0.800278] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.800280] PCI-DMA: using GART IOMMU.
[ 0.800282] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802774] IBS: LVT offset 1 assigned
[ 0.802804] perf: AMD IBS detected (0x0000001f)
[ 0.802963] audit: initializing netlink socket (disabled)
[ 0.802978] type=2000 audit(1334050141.799:1): initialized
[ 0.803936] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.806526] VFS: Disk quotas dquot_6.5.2
[ 0.806569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.806635] msgmni has been set to 32100
[ 0.806971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.807061] io scheduler noop registered
[ 0.807064] io scheduler deadline registered
[ 0.807124] io scheduler cfq registered (default)
[ 0.807339] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.807533] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.807750] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.807957] GHES: HEST is not enabled!
[ 0.808045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.828667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.849559] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.849760] Linux agpgart interface v0.103
[ 0.849805] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.850193] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.850234] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.850352] mousedev: PS/2 mouse device common for all mice
[ 0.850406] rtc_cmos 00:02: RTC can wake from S4
[ 0.850557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.850580] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.850589] cpuidle: using governor ladder
[ 0.850590] cpuidle: using governor menu
[ 0.850724] TCP cubic registered
[ 0.850812] NET: Registered protocol family 10
[ 0.851112] NET: Registered protocol family 17
[ 0.851114] Registering the dns_resolver key type
[ 0.851253] PM: Hibernation image not present or could not be loaded.
[ 0.851260] registered taskstats version 1
[ 0.852170] rtc_cmos 00:02: setting system clock to 2012-04-10 09:29:02 UTC (1334050142)
[ 0.852195] Initializing network drop monitor service
[ 0.853114] Freeing unused kernel memory: 732k freed
[ 0.853269] Write protecting the kernel read-only data: 8192k
[ 0.857266] Freeing unused kernel memory: 1620k freed
[ 0.859285] Freeing unused kernel memory: 660k freed
[ 0.867016] udevd[74]: starting version 181
[ 0.889751] SCSI subsystem initialized
[ 0.890757] usbcore: registered new interface driver usbfs
[ 0.890779] usbcore: registered new interface driver hub
[ 0.891269] usbcore: registered new device driver usb
[ 0.892313] libata version 3.00 loaded.
[ 0.892491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.892633] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.892672] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.892682] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.892712] ehci_hcd 0000:00:12.2: debug port 1
[ 0.892736] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800
[ 0.894588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900033] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.900335] hub 1-0:1.0: USB hub found
[ 0.900340] hub 1-0:1.0: 6 ports detected
[ 0.900579] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.900591] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.900599] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.900621] ehci_hcd 0000:00:13.2: debug port 1
[ 0.900645] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00
[ 0.910028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.910295] hub 2-0:1.0: USB hub found
[ 0.910299] hub 2-0:1.0: 6 ports detected
[ 0.910565] ahci 0000:00:11.0: version 3.0
[ 0.910649] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 0.910748] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.910751] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.913392] scsi0 : ahci
[ 0.913744] scsi1 : ahci
[ 0.913950] scsi2 : ahci
[ 0.914322] scsi3 : ahci
[ 0.914729] ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 43
[ 0.914733] ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 43
[ 0.914736] ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 43
[ 0.914739] ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 43
[ 0.915322] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.915334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.915365] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000
[ 0.970892] hub 3-0:1.0: USB hub found
[ 0.970899] hub 3-0:1.0: 3 ports detected
[ 0.971078] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.971089] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.971107] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000
[ 1.027554] hub 4-0:1.0: USB hub found
[ 1.027561] hub 4-0:1.0: 3 ports detected
[ 1.027748] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.027757] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.027782] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
[ 1.084224] hub 5-0:1.0: USB hub found
[ 1.084230] hub 5-0:1.0: 3 ports detected
[ 1.084422] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.084430] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.084446] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000
[ 1.140874] hub 6-0:1.0: USB hub found
[ 1.140880] hub 6-0:1.0: 3 ports detected
[ 1.141059] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.141069] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.141087] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000
[ 1.197575] hub 7-0:1.0: USB hub found
[ 1.197581] hub 7-0:1.0: 2 ports detected
[ 1.233428] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.233482] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.233530] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.233597] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.234129] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.236194] scsi4 : pata_atiixp
[ 1.236384] scsi5 : pata_atiixp
[ 1.236884] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.236886] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.408804] ata5.00: ATA-7: GENERIC, BAJ41G20, max UDMA/133
[ 1.408807] ata5.00: 398297088 sectors, multi 16: LBA48
[ 1.422031] ata5.00: configured for UDMA/100
[ 1.422229] scsi 4:0:0:0: Direct-Access ATA GENERIC BAJ4 PQ: 0 ANSI: 5
[ 1.424626] sd 4:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 1.424739] sd 4:0:0:0: [sda] Write Protect is off
[ 1.424741] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.424759] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.487336] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.488267] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.510062] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 1.677918] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
[ 1.678062] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-3/input0
[ 1.678078] usbcore: registered new interface driver usbhid
[ 1.678079] usbhid: USB HID core driver
[ 1.776721] usb 2-6: new high-speed USB device number 2 using ehci_hcd
[ 1.803379] Refined TSC clocksource calibration: 3210.938 MHz.
[ 1.803389] Switching to clocksource tsc
[ 2.366725] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[ 2.415746] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.530590] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
[ 2.530660] generic-usb 0003:24AE:2000.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input0
[ 2.536738] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input2
[ 2.536864] generic-usb 0003:24AE:2000.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input1
[ 4.045730] udevd[189]: starting version 181
[ 5.247350] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.254193] EDAC MC: Ver: 2.1.0
[ 5.347684] Linux media interface: v0.10
[ 5.401241] MCE: In-kernel MCE decoding enabled.
[ 5.406762] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 5.410134] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.410236] ACPI: Power Button [PWRB]
[ 5.410305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.410331] ACPI: Power Button [PWRF]
[ 5.423440] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.427224] wmi: Mapper loaded
[ 5.442807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.442941] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 5.443253] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9001269c000, 20:cf:30:19:3e:02, XID 18000000 IRQ 44
[ 5.443255] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 5.465393] AMD64 EDAC driver v3.4.0
[ 5.465442] Floppy drive(s): fd0 is 1.44M
[ 5.465464] EDAC amd64: DRAM ECC disabled.
[ 5.466318] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module wil

Answer 1

Hm, dis- and reconnecting the graphics card solved the problem. Did this because I figured a hardware problem after freezes in three different live systems.
Last edited by null (2012-04-15 11:32:41)