[SOLVED] Dell 1558: audio doesn't work!

Hi,
the sound does not work on my Dell 1558. these are some details:
[tiziano@arch64 ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
02:00.1 Audio device: ATI Technologies Inc Device aa68
[tiziano@arch64 ~]$ ls -l /sys/module/snd/holders
totale 0
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_hda_codec -> ../../snd_hda_codec
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_hda_codec_idt -> ../../snd_hda_codec_idt
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_hda_intel -> ../../snd_hda_intel
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_hwdep -> ../../snd_hwdep
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_mixer_oss -> ../../snd_mixer_oss
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_pcm -> ../../snd_pcm
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_pcm_oss -> ../../snd_pcm_oss
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_seq -> ../../snd_seq
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_seq_device -> ../../snd_seq_device
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_seq_oss -> ../../snd_seq_oss
lrwxrwxrwx 1 root root 0 6 nov 02.47 snd_timer -> ../../snd_timer
[tiziano@arch64 ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[tiziano@arch64 ~]$ cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
I tried to follows various wiki pages and tutorial such as this (http://programminglinuxblog.blogspot.co … ebook.html) and change modprobe.conf such as:
options snd-hda-intel index=0
options snd-hda-intel model=auto
options snd-hda-intel model=dell-m6
options snd-hda-intel index=0 model=auto
but I can't hear anything... I tried also the headphone.
This is amixer:
[tiziano@arch64 ~]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 44 [69%] [-15.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 48 [75%] [-12.00dB] [on]
Front Right: Playback 48 [75%] [-12.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-48.00dB] [off]
Front Right: Playback 0 [0%] [-48.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Digital Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
and my rc.conf MODULES:
MODULES=(fglrx uvcvideo acpi-cpufreq cpufreq-ondemand cpufreq-powersave cpufreq-userspace lib80211_crypt_tkip wl !b43 !ssb !lib80211 !snd-pcsp !pcspkr)
Someone can help me? Thanks
Last edited by monotiz (2010-11-07 10:03:08)

surfed wrote:
my /etc/modprobe.d/modprobe.conf:
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options snd-hda-intel model=dell-m6
options snd-hda-intel enable_msi=1
and i dont have /etc/modprobe.d/sound.conf
make sure everything is un-muted
thanks, this is work!

Similar Messages

I installed an HP update for audio driver, now audio doesn't work,

downloadde and installed an HP update for audio driver, don't think it installed successfully however now my audio doesn't work. is it possible to do a system restore on win 8.1?
HP Pavilion 500-214
This question was solved.
View Solution.

Actionhero, welcome to the forum.
Yes, it is possible to do a System Restore. Here is a guide that will help you with it.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Video audio doesn't work

video audio doesn't work
video runs but no sound
please help

ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608
Again:
It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

Anyone having this problem on the Mac Pro 8 Core
USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

Audio doesn't work after encoding

I have finished editing a video and gone to export it as a WMV and the audio doesn't work; there is just a buzzing noise.
The audio works fine on the timeline, but i just cannot export it.
Any ideas what's gone wrong?

Hi ATR, thanks for getting back to me. Here is all the info you required:
It's Premiere Elements 10 on a Windows 7 PC.
The source media is a mix of WMV, MP3 audio and JPGs.
The project settings are:
Editing Mode: DSLR
Timebase: 25.00 frames/second
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
The export settings are:
Windows Media:
Presets: HD 720p 25
File type: Windows media
Frame size: 1280 x 720
Fps: 25
Audio settings: 440 kbps, 96kHz, 2 channel 24 bit VBR (I have tried it with a number of different variations on this and still had no luck)
I’ve tried opening with Windows media player as well as VLC. Neither are having it.

5.0.2 Lollipop equalizer & clear audio+ doesn't work anymore (except in walkman)

In 5.0.2 Lollipop update equalizer & clear audio+ doesn't work anymore (except in walkman). In 4.4.4 equalizer works without problem! Sony please fix, because I can't listen other content without adjusted equalizer.
xperia tablet Z2 wifi

Solution by Rickard
"I have got some more information about this and it's up to the app if the equalizer is used or not. It's not on by default for all apps, the developer of an app must state that they want to use it in their code."
Android team turn this features off in default. Pffff why?? ))
And now we have to wait that all application developers have added this feature, Facepalm.

[solved]vlc audio doesn't work for HD videos on spdif

As said vlc doesn't work with HD videos, and now I tried to get it to work my normal videos have echo.
I have spdif output and use alsa. Everything worked just few day back. It might be the update to KDE4.4.1, but I'm no sure.
I'll give more ifo when I get it.
Never mind I reset the vlc settings and everything works fine.
Last edited by Primoz (2010-03-07 10:51:59)

Wow...looks like I spent waaaaay too much time on this problem. The mute button on my IR remote wasn't working which is why I thought it couldn't be a mute problem, but it seems that is just an LIRC mapping problem. When I use the keyboard +, it un-muted. Now to fix LIRC...
Thanks kid

X-fi Xtreme Audio doesn't work in Windows 7 64 bit

Hello everyone,
I know this is a known issue and I've found many topics on this, but still I can't find any solution and I hope you can help.
I've a Creative X-fi Xtreme Audio that was working perfectly under Windows XP SP3 but then I've upgraded to Windows 7 64 bit and the sound coming out from my speakers is awful. I've installed the latest driver from creative home site, I've updated the OS via "microsoft Update", I've tried many suggestions I've found on the web to solve this, like phisically change the PCI slot of the sound card, or reduce the ram ammount via msconfig but it didn't work. I've tried some custom driver either, the support pack 2.7 by Daniel?K. but nothing... I'm still at the starting point.
What should I do?
This is my actual configuration:
OS: Microsoft Windows 7 Premium SP v 6..760
CPU: AMD Athlon 64x2 6000+
MB: Asus M3N78 SE (with the latest bios version 002)
Ram: 4gb
Video: nVidia GeForce GT 220

I use CS4 on a Windows 7 64-bit computer.
I noticed that none of the extensions I installed with the Extension Manager don't appear at all in any of the CS4 programs.
Can anyone tell me why this doesn't work or how to solve this problem?
Try posting to the Extension Manager forum:
http://forums.adobe.com/community/creativesuites/extensionmanager
HTH,
Randy

[SOLVED]Xorg 1.8 doesn't work

Hello, I've just upgraded to linux-firmware and the newest X.org, which doesn't work.
Xorg.0.log tells me:
[ 934.318]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[ 934.322] X Protocol Version 11, Revision 0
[ 934.323] Build Operating System: Linux 2.6.33-ARCH x86_64
[ 934.325] Current Operating System: Linux staerseus 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 934.326] Kernel command line: root=/dev/disk/by-uuid/727c4683-ee4c-4b32-8a59-370264cb7d9f ro i915.modeset=1 init=/sbin/bootchartd
[ 934.327] Build Date: 26 May 2010 07:50:07PM
[ 934.329]
[ 934.330] Current version of pixman: 0.18.2
[ 934.331] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 934.334] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 934.338] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 21 10:15:38 2010
[ 934.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 934.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 934.343] (==) No Layout section. Using the first Screen section.
[ 934.343] (==) No screen section available. Using defaults.
[ 934.343] (**) |-->Screen "Default Screen Section" (0)
[ 934.343] (**) | |-->Monitor "<default monitor>"
[ 934.343] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 934.343] (==) Automatically adding devices
[ 934.343] (==) Automatically enabling devices
[ 934.343] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 934.343] Entry deleted from font path.
[ 934.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 934.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 934.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 934.343] (II) Loader magic: 0x7ce880
[ 934.343] (II) Module ABI versions:
[ 934.343] X.Org ANSI C Emulation: 0.4
[ 934.343] X.Org Video Driver: 7.0
[ 934.343] X.Org XInput driver : 9.0
[ 934.343] X.Org Server Extension : 3.0
[ 934.352] (--) PCI:*(0:0:2:0) 8086:2a42:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 934.352] (--) PCI: (0:0:2:1) 8086:2a43:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2100000/1048576
[ 934.352] (II) Open ACPI successful (/var/run/acpid.socket)
[ 934.352] (II) LoadModule: "extmod"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 934.352] (II) Module extmod: vendor="X.Org Foundation"
[ 934.352] compiled for 1.8.1, module version = 1.0.0
[ 934.352] Module class: X.Org Server Extension
[ 934.352] ABI class: X.Org Server Extension, version 3.0
[ 934.352] (II) Loading extension MIT-SCREEN-SAVER
[ 934.352] (II) Loading extension XFree86-VidModeExtension
[ 934.352] (II) Loading extension XFree86-DGA
[ 934.352] (II) Loading extension DPMS
[ 934.352] (II) Loading extension XVideo
[ 934.352] (II) Loading extension XVideo-MotionCompensation
[ 934.352] (II) Loading extension X-Resource
[ 934.352] (II) LoadModule: "dbe"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 934.352] (II) Module dbe: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension DOUBLE-BUFFER
[ 934.353] (II) LoadModule: "glx"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 934.353] (II) Module glx: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (==) AIGLX enabled
[ 934.353] (II) Loading extension GLX
[ 934.353] (II) LoadModule: "record"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 934.353] (II) Module record: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.13.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension RECORD
[ 934.353] (II) LoadModule: "dri"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 934.353] (II) Module dri: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension XFree86-DRI
[ 934.354] (II) LoadModule: "dri2"
[ 934.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 934.354] (II) Module dri2: vendor="X.Org Foundation"
[ 934.354] compiled for 1.8.1, module version = 1.2.0
[ 934.354] ABI class: X.Org Server Extension, version 3.0
[ 934.354] (II) Loading extension DRI2
[ 934.354] (==) Matched intel as autoconfigured driver 0
[ 934.354] (==) Matched vesa as autoconfigured driver 1
[ 934.354] (==) Matched fbdev as autoconfigured driver 2
[ 934.354] (==) Assigned the driver to the xf86ConfigLayout
[ 934.354] (II) LoadModule: "intel"
[ 934.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.354] (II) Module intel: vendor="X.Org Foundation"
[ 934.354] compiled for 1.7.6, module version = 2.11.0
[ 934.354] Module class: X.Org Video Driver
[ 934.354] ABI class: X.Org Video Driver, version 6.0
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)
[ 934.356] (II) UnloadModule: "intel"
[ 934.356] (II) Unloading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.356] (EE) Failed to load module "intel" (module requirement mismatch, 0)
[ 934.357] (II) LoadModule: "vesa"
[ 934.357] (WW) Warning, couldn't open module vesa
[ 934.357] (II) UnloadModule: "vesa"
[ 934.357] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 934.359] (II) LoadModule: "fbdev"
[ 934.359] (WW) Warning, couldn't open module fbdev
[ 934.359] (II) UnloadModule: "fbdev"
[ 934.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 934.360] (EE) No drivers available.
[ 934.362]
Fatal server error:
[ 934.364] no screens found
[ 934.365]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 934.370] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 934.372]
What does the problem with modules mean? Archlinux was warning me, that "in future releases /etc/modprobe.d/framebuffer_blacklist.conf.save will be ignored, but it is the same file as /etc/modprobe.d/framebuffer_blacklist.conf.
I don't understand, why it cannot find any screens (I use a laptop screen)
I tried to start with and without xorg.conf, which is:
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
The graphic driver I use is xf86-video-intel-newest from archstuff, but it is the same version as xf86-video-intel.
I am not sure if I provided all needed info, but I hope so. Thank you for your help.SOLVED
Last edited by Staerseus (2010-06-21 09:18:03)

Use the arch version. It is actually built against the xorg version that you are using... here is the relevant section of your log:
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)

[SOLVED] - xset at startup doesn't work

I use the following command to set my screensaver options
xset dpms 30 60 300
After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
Contents of xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "StandbyTime" "2"
Option "SuspendTime" "3"
Option "OffTime" "5"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 1520 WXGA+ LCD"
VendorName "Dell"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "BlankTime" "0.1"
Option "StandbyTime" "0.5"
Option "SuspendTime" "1"
Option "OffTime" "5"
EndSection
Contents of ~/.xprofile
xset dpms 30 60 300
I even added this to crontab
0 * * * * ~/Wallpapers/change-background-folder.py
0 * * * * /usr/bin/xset s 30
0 * * * * /usr/bin/xset dpms 60 120 300
@reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
@reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
@reboot ID=vu AFTER=1m vuze
Still after doing all this, when I give xset q after a reboot, I get
[theta@boolean-pc ~]$ xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 3/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
Server does not have the FontCache Extension
The parameters are still all 0.
Please suggest a solution.
Apoorv
Last edited by theta (2011-08-02 15:56:06)

jasonwryan wrote:
If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
(sleep 15s && xset dpms 30 60 300) &
exec yourwm
That may get around the problem bernarcher describes...
Thank you! This works very well for me.
It's the only way I can get it to work.
For the records, so the smart people can find the problem, here is my xorg.conf:
Section "ServerLayout"
Identifier "ServerLayout0"
Screen 0 "BenQ" 0 0
#Option "BlankTime" "0"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Screen"
Identifier "BenQ"
Device "Intel4000"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
#Depth "24"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Intel4000"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
# Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "se"
EndSection
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
$ xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
And the xorg log:
[ 17738.153]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17738.194] X Protocol Version 11, Revision 0
[ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
[ 17738.254] Build Date: 14 April 2014 08:39:09AM
[ 17738.269]
[ 17738.285] Current version of pixman: 0.32.4
[ 17738.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
[ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17738.406] (==) ServerLayout "ServerLayout0"
[ 17738.406] (**) |-->Screen "BenQ" (0)
[ 17738.406] (**) | |-->Monitor "HDMI2"
[ 17738.406] (**) | |-->Device "Intel4000"
[ 17738.406] (**) Option "StandbyTime" "10"
[ 17738.406] (**) Option "SuspendTime" "20"
[ 17738.406] (**) Option "OffTime" "30"
[ 17738.406] (==) Automatically adding devices
[ 17738.406] (==) Automatically enabling devices
[ 17738.406] (==) Automatically adding GPU devices
[ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17738.406] Entry deleted from font path.
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17738.406] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17738.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17738.406] (II) Loader magic: 0x804c80
[ 17738.406] (II) Module ABI versions:
[ 17738.406] X.Org ANSI C Emulation: 0.4
[ 17738.406] X.Org Video Driver: 15.0
[ 17738.406] X.Org XInput driver : 20.0
[ 17738.406] X.Org Server Extension : 8.0
[ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17738.424] Initializing built-in extension Generic Event Extension
[ 17738.439] Initializing built-in extension SHAPE
[ 17738.454] Initializing built-in extension MIT-SHM
[ 17738.468] Initializing built-in extension XInputExtension
[ 17738.482] Initializing built-in extension XTEST
[ 17738.495] Initializing built-in extension BIG-REQUESTS
[ 17738.509] Initializing built-in extension SYNC
[ 17738.523] Initializing built-in extension XKEYBOARD
[ 17738.536] Initializing built-in extension XC-MISC
[ 17738.548] Initializing built-in extension SECURITY
[ 17738.561] Initializing built-in extension XINERAMA
[ 17738.573] Initializing built-in extension XFIXES
[ 17738.585] Initializing built-in extension RENDER
[ 17738.597] Initializing built-in extension RANDR
[ 17738.608] Initializing built-in extension COMPOSITE
[ 17738.620] Initializing built-in extension DAMAGE
[ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 17738.643] Initializing built-in extension DOUBLE-BUFFER
[ 17738.654] Initializing built-in extension RECORD
[ 17738.665] Initializing built-in extension DPMS
[ 17738.677] Initializing built-in extension Present
[ 17738.688] Initializing built-in extension DRI3
[ 17738.700] Initializing built-in extension X-Resource
[ 17738.711] Initializing built-in extension XVideo
[ 17738.722] Initializing built-in extension XVideo-MotionCompensation
[ 17738.734] Initializing built-in extension XFree86-VidModeExtension
[ 17738.746] Initializing built-in extension XFree86-DGA
[ 17738.757] Initializing built-in extension XFree86-DRI
[ 17738.769] Initializing built-in extension DRI2
[ 17738.769] (II) "glx" will be loaded by default.
[ 17738.769] (II) LoadModule: "dri2"
[ 17738.769] (II) Module "dri2" already built-in
[ 17738.769] (II) LoadModule: "glamoregl"
[ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.0, module version = 0.6.0
[ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17738.770] (II) LoadModule: "glx"
[ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17738.770] (II) Module glx: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.1, module version = 1.0.0
[ 17738.771] ABI class: X.Org Server Extension, version 8.0
[ 17738.771] (==) AIGLX enabled
[ 17738.782] Loading extension GLX
[ 17738.782] (II) LoadModule: "intel"
[ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17738.782] (II) Module intel: vendor="X.Org Foundation"
[ 17738.783] compiled for 1.15.0, module version = 2.99.911
[ 17738.783] Module class: X.Org Video Driver
[ 17738.783] ABI class: X.Org Video Driver, version 15.0
[ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 17738.783] (++) using VT number 1
[ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 17738.783] (==) intel(0): RGB weight 888
[ 17738.783] (==) intel(0): Default visual is TrueColor
[ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
[ 17738.783] (**) intel(0): Option "TearFree" "true"
[ 17738.783] (**) intel(0): Framebuffer tiled
[ 17738.784] (**) intel(0): Pixmaps tiled
[ 17738.784] (**) intel(0): "Tear free" enabled
[ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
[ 17738.784] (II) intel(0): Output DP1 has no monitor section
[ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output DP2 has no monitor section
[ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 17738.784] (==) intel(0): DPI set to (96, 96)
[ 17738.784] (II) Loading sub module "dri2"
[ 17738.784] (II) LoadModule: "dri2"
[ 17738.784] (II) Module "dri2" already built-in
[ 17738.784] (==) Depth 24 pixmap format is 32 bpp
[ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 17738.784] (==) intel(0): Backing store enabled
[ 17738.784] (==) intel(0): Silken mouse enabled
[ 17738.784] (II) intel(0): HW Cursor enabled
[ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17738.784] (**) intel(0): DPMS enabled
[ 17738.784] (II) intel(0): [DRI2] Setup complete
[ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
[ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
[ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
[ 17738.784] (==) intel(0): hotplug detection: "enabled"
[ 17738.784] (--) RandR disabled
[ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 17738.789] (II) AIGLX: Loaded and initialized i965
[ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
[ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.839] (II) LoadModule: "evdev"
[ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
[ 17738.840] compiled for 1.15.0, module version = 2.8.2
[ 17738.840] Module class: X.Org XInput Driver
[ 17738.840] ABI class: X.Org XInput driver, version 20.0
[ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.840] (**) Power Button: always reports core events
[ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.840] (--) evdev: Power Button: Found keys
[ 17738.840] (II) evdev: Power Button: Configuring as keyboard
[ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17738.840] (**) Option "xkb_rules" "evdev"
[ 17738.840] (**) Option "xkb_model" "pc104"
[ 17738.840] (**) Option "xkb_layout" "se"
[ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 17738.870] (**) Video Bus: always reports core events
[ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 17738.871] (--) evdev: Video Bus: Found keys
[ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.871] (**) Power Button: always reports core events
[ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.871] (--) evdev: Power Button: Found keys
[ 17738.871] (II) evdev: Power Button: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.873] (II) No input driver specified, ignoring this device.
[ 17738.873] (II) This device may have been added with another device file.
[ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
[ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
[ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.873] (**) A..... G3: always reports core events
[ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
[ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
[ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.873] (--) evdev: A..... G3: Found relative axes
[ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
[ 17738.873] (II) evdev: A..... G3: Configuring as mouse
[ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
[ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
[ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.873] (**) A..... G3: (accel) acceleration profile 0
[ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
[ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
[ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
[ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.874] (**) A..... G3: always reports core events
[ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
[ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
[ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.874] (--) evdev: A..... G3: Found relative axes
[ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found absolute axes
[ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found keys
[ 17738.874] (II) evdev: A..... G3: Configuring as mouse
[ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
[ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
[ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
[ 17738.874] (**) Option "xkb_rules" "evdev"
[ 17738.874] (**) Option "xkb_model" "pc104"
[ 17738.874] (**) Option "xkb_layout" "se"
[ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
[ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.874] (**) A..... G3: (accel) acceleration profile 0
[ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
[ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
[ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
[ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
[ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
It would be nice to find out why the settings was being set to "0".
Last edited by Sne (2014-04-29 20:40:50)

[SOLVED] External USB mouse doesn't work

I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
Last edited by avli (2011-07-14 16:53:15)

Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
Hope this information will be helpful for users who probably faced with the same problem. Thank you!

Html5 audio doesn't work for mp3s.

I can't seem to get tag <audio> working with mp3s on my system(FF 24, Win 7 x64). I tried some wav files, those work ok. But whenever i try to play mp3 file, the html5 player just flashes for a few milliseconds and then disappears. So, is there a bitrate limitation (or any other limitation) for html5 audio tag on mp3s?
Here's an example of code and one of the mp3 files I am trying to use - http://dindo.wz.cz/jukebox.html .
(file http://dindo.wz.cz/Galaxy32Star4.mp3 )
The console (ctrl+shift+k) gives these errors (rough translation):
[14:07:48.861] Type HTTP "Content-Type" "audio/mpeg" is not supported. Loading of media http://dindo.wz.cz/Galaxy32Star4.mp3 has failed. @ http://dindo.wz.cz/jukebox.html
[14:07:48.862] Couldn't load any of candidate sources. Loading of media was suspended. @ http://dindo.wz.cz/jukebox.html
p.s: Even the w3c example doesn't work when i remove the ogg source. (http://www.w3schools.com/html/tryit.asp?filename=tryhtml5_audio_all).

can you replicate the issue, when you create a new profile for testing purposes?: [[Use the Profile Manager to create and remove Firefox profiles]]

Edge audio doesn't work in DPS project

Being very happy after latest update of Edge CC, I've decided to make DPS project for iPad.
First, when I chose "autoplay" button for audio timeline, I got a warning about sound autoplay option is not supported at digital devices (??). So what should I do? To not use the autoplay?
Second, a preview of Edge animation in web-browser works perfect (both background sound and a sound for user interaction) - BUT when I put .oam file in DPS, the sound just DOESN'T WORK.
I tried everything - check-uncheck "autoplay", check-uncheck "preload audio", put an audio as a trigger.. no sound in iPad.
And when I put audio file directly into Indesign, a sound works perfect in iPad.
What's going on?

Agapyla wrote:
so the idea is all projects for iOS cannot use Edge Audio feature that was just released last month? At least in full way, as it is shown in built-in Edge Tutorial (autoplay)?
No, not exactly. iOS and other mobile devices can playback HTML 5 audio, which is what Animate outputs.
But the fact of the matter is that autoplay for audio (and preloading) is not supported by mobile devices - it's a limitation manufacturers build into their devices. Therefore, to use audio from Animate in mobile devices, you have to initiate audio playback from a user event, such as touchstart or click.
We warn you of this in Edge Animate when you turn on autoplay (warnings appear at the bottom of the Stage).

[SOLVED] openbox menu command doesn't work with &&

I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)

hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you.

Audio doesn't work on my pavilion m6-1045dx

What can I do to fix it?

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56953.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[SOLVED] Dell 1558: audio doesn't work!

Similar Messages

Maybe you are looking for