Solved Freehand 10 Printing Problem

Apparently all that was needed was to reselect the printer in the Mac System Print & Fax Preferences. Freehand now prints as well as it ever did.
I deleted the old printer and found and reinstalled the Epson 88 and now all is well with Freehand. I locked the Print & Fax window!
Although the Epson was selected it was apparently not identified as the active printer. Rebooting the printer selection process ended the troubles. Very simple after trying every other imaginable solution.
Hopefully this may help others using Leopard 10.5.8 who are experiencing printer problems.

Effectively, downgrading to cups-1.5.3-6 solves the problem.
I followed the instructions at Downgrading Packages for downgrading, downloaded cups-1.5.3-6 from the Arch Rollback Machine, installed it with "sudo #pacman -U cups-1.5.3-6-i686.pkg.tar.xz" and restarted the Cups service (#sudo rc.d restart cupsd).
The whole process took about 10 minutes including print testing. No rebooting was necessary.
For me, this is amazing considering that this is my fourth day with Arch.
Thank you very much!

Similar Messages

Has anyone solved an Epson printing problem?

After I upgraded to Leopard, I noticed that my printing on my Epson Stylus Photo R1800 was poor in quality to say the least. I tried all of the usual troubleshooting techniques and then emailed Epson. They directed me to a new driver, and they also said that I had to "reset" my old printer driver. I followed directions (even though their directions weren't exactly correct), and I managed to print about five decent prints, but now my printer is back to its old crappy printing, with incorrect color, banding, and no menu in the print dialog box where I can save my choice of papers & resolutions, etc. I have tried to email Espon three more times, but they are not responding to me.
Can anyone advise?
Thanks.

I am using two Macs -- an Imac Power PC, and a MacBook Pro (intel). Leopard has screwed up printing on both. I just went to the Epson website, and while I find a new release driver, it is labelled "Printer Driver v3.0aAs" and it says it was posted on 12/6/06!!! I have found no reference to the 6.12 driver. Also, even this supposedly new driver (Printer Driver v3.0aAs) says iot if for Intel macs, and says nothing about Power PC Macs.
Relatedly, I am interested in exactly what you are experiencing with the 1800. In my case, the Power PC IMac prints are completely wrong re color. No relationship between the screen and the print. With the MacBook Pro, I am getting an error message that the "media is not loaded properly" even though the IMac is communicating fine with the printer and there is no error message.
Help!!!

10.5.2 solved my wireless printing problem

After installing 10.5.2 on my MPB I can now print to my Epson R260 printer that is connected to
my Airport Extreme Base Station. This worked under Tiger but would not work with Leopard.
I had to delete the printer and then add it again. Now wireless printing works again.
Very nice work Apple. Thank you.

Mine too, epson cx7400 now works connected to airport. Installed newest drivers from epsons website and redid the printer setup, now works.

Color shift printing problem from LR solved!!

Check this discussion for workaround to the color shift printing problem in LR. It's for the 3800, but I assume it also applies to other Epson printers, and quite possibly to other printer vendors.
http://www.adobeforums.com/webx/.3c05f2c5/6

Yes it applies to Canon as well.

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

Printing problems with HP Laserjet P1005

everything seems to be ok with my printer HP Lasejet P1005, but it just doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge" althrough I've changed the cartridge already. Also there is a message "HP:s part number"
What can or should I do??? Help!!!

Hi @rlp48,
I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid 5 times quickly. It should print out a page with lines on it.
Did it print the self test?
If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you using Genuine HP Toner?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Plus "unspecified printer problem"

I just set up my HP Officejet Pro 8600 Plus e-All-in-One. The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer. When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer." When I check the printer pannel, there are no problems reported. The machine seems to print okay, but I'd like to clear up this error that is shown. Any ideas?
Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting. Thanks.
This question was solved.
View Solution.

HELP!
I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
I'm a step away from taking this back and buying an Epson.
My experience with their support has bee stellar at a commercial printer level.
This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
any help will be appreciated.

Printing problem on HP Photosmart C5280 All-in-One

Hi,
I'm trying to print a single page calendar but it's coming out with streaks in 3 places. I tried 3x and the streaks are always in the same place. I'm using Konica Inkjet Paper QP Premium Photo Glossy, which is supposed to be suitable for all modern inkjet printers. Is this an ink problem, a printer problem or a paper problem?

My guess would be a print settings issue. I would suggest setting the media type to Photo paper rather than automatic and set the quality to "Best".
If that does not help please provide more details - are the streaks at a consistent spacing? Where are they on the page? What color are the streaks?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Reader 10.0 Printing Problem - Font changing while printing

Dear all,
can anybody help me on my printing problem with Adobe Reader 10.0 ?
While printing a pdf I cannot do anything else, it is not possible to touch the mouse
because when I do this, the font is changing while printing to something like grecian.
Can somebody help me on this ?
Reader 9 did not cause this problem.
Thanx and best Regards, Travelplan24

I have the same problem, but I didn't realize it could be set off by my working on another task. It is also triggered when the pdf has scientific notation, or a very extreme change in font and font size. E.g., text in boxes, algorithms, etc. seem to trigger the problem.
I have reinstalled my print driver (several times, latest on Sunday), and reinstalled Adobe Reader (now 10.0.1) but the problem remains.
Printer:
HP Officejet 6500 (E709n Series) wireless, now on USB.
Document properties: Most recent font conversion - yesterday:
Producer: Distiller 4.0.2 for Mac
PDF version: 1.3 (Acrobat 4.x)
Fonts: Helvetica-Neue, Type 1, Encoding: ANSI and Roman
The font is not converting into Greek. E.g. "Problem-Solving Process" became "Qspcrfm . Tpnwjoh!Qspdftt"' with the kerning overlapping characters.
The font 'conversion' has happened many, many times on a wide variety of pdf files in the past 6 months. Never had the problem before. I had downloaded new Reader, and purchased the new printer -- I do not know which change created the problem.
I will cease doing anything when I print as a temporary workaround, but that is not a good solution.
I sure hope you can figure out what the bug is. Thanks in advance.

Printing problem when PDF is sent to the printer with certain fonts - missing text

I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used. The text in large sections of the PDF is missing on the paper version, but the text is there on the screen. It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer. The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.). I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer. Same result each time, no call back. If anyone from Adobe is listening, it's case number 184891587. The font appears as an embedded subset when I look at the document properties. Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF. In all cases the PDF appears correct on the screen. Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer. If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.
The setup/process I'm using is as follows:
Windows 7 Professional SP1 64-Bit
Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio. Even other variations on documents.
I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1. Same Result
Printing to Adobe PDF as the printer, from the third party application
Printing to a Xerox printer from PDF using Acrobat - Text missing
Client prints to Konica printer - Text missing
I print to the wide-format Ricoh (which also does 11x17) and the text is present.
Is there something I'm missing? Is the entire font not getting embedded into the PDF file? I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone. Is it possible the font is too large to be completely embedded? Where can I go from here?

Success! At least for now. It looks like my problem was fixed with Adobe's most recent update, 11.0.06. From the release notes:
PDF creation
Added support for Lotus Notes 9.
Added support for WebCapture in IE 11.
Added support for conversions from AutoCAD 2013.
3652540 A blank pdf is created for files having hidden visual style.
3601108 Flow Chart converts as a multicolored square.
3654345 Word documents missing parts of images in conversion to PDF.
3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
3599407 Checkbox check marks do not appear in these files.
3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
3650244 ODA falis to convert DWG files to PDF for large files.
I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away. We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72. I'll come back to thread if we have printing problems at the end-user locations.

Printer problem

I have a MAC G3 I am running Mac OS 10.2.8 I am also running Mac OS 9.2.2
I had to buy a new printer. I replaced my Epson Stylus 740 with a
Epson Stylus C88+. The problem is the printer works with everything I want to print except when I try to print a Quark document. I get an alert that says
"Cannot open the printer. [64]"
The Quark 4.0 app only works on the OS9.2.2
Can a Quark document be saved to a PDF? That would solve the print problem I think.

Get the utility PrintToPDF http://www.jwwalker.com/pages/pdf.html Works in OS 9 like the PDF print option in OS X.
 Cheers, Tom

Re: Printer Problems after 10.4.6 Update

I cannot find a solution to my printing problems since having updated to 10.4.6
I am using an HP Deskjet 3620 which worked fine with 10.4.5
Since the update, my printer settings have disappeared. When I try to add a printer, all I get is an error message. I have tried reinstalling the printer software, but I receive a message that I do not have a system folder. I have tried resetting my printer system but this does not solve the problem, nor has repaiting disk permissions.
Does someone have a solution?
Sincerely frustrated,
Erich Zimmerman
Power Mac G-4 Mac OS X (10.4.6)

Thanks.
i will give that a try.
Erich Zimmerman
Power Mac G-4 Mac OS X (10.4.6)

G3 Pismo Powerbook and HP Deskjet 3325 Printing Problems

The problem is that the Deskjet fails altogether to print sometimes. The error message tells me to allocate more memory to the printer. I do so but this does not help at all. I have 128Mb virtual memory turned on in addition to the built-in RAM of 128Mb.
Might the problem simply be lack of RAM? There does seem to be plenty of memory available if I look at ‘About this Computer’
In order to try and solve this problem, I have updated
OS 9.1 to 9.2.1 to 9.2.2 successfully
downloaded and installed the latest printer driver v.6.4 from the HP download site
I now have two options, among others, in the left-hand window of the Chooser:
The old printer driver called something like Deskjet 5.3 and the new printer driver called Inkjet 6.4
If I select the former, which is what I always did in the past, the Deskjet 3325 printer appears in the right-hand window of Chooser, I select it (with AppleTalk inactive) and then the document sometimes, but sometimes not, prints OK.
If on the other hand, I select the Inkjet 6.4 driver in the left-hand window, no printer at all appears in the right-hand window. If I just continue from here and give the print command inside, for example a Word document, the print dialogue appears, I click on print, but am then told that I have selected a model called HP 6670, which is the wrong model of printer, and must therefore select the right model. The Inkjet Printer Utility does not offer me the option of selecting the right model viz the 3325, or indeed any model.
It may or may not be relevant, but I have Word 5.1 and Word 98 on the G3. Printing problems seem to occur far more with Word 98 than Word 5.1.
I would be most grateful for any help. Thanks.
Nick
G5 iMac Mac OS X (10.4.6)

Well. I'll answer my own question in case anyone is interested.
Uninstall the HP printer drivers.
To do this, delete all references to HP in the Extensions, Disabled Extensions, Preferences and Startup folders, all of them in the System folder, by selecting them, dragging them to the Trash and emptying the Trash.
Then do the same with all references to HP items in the Applications folder.
Download and reinstall the most-up-to-date printer driver avaialble for your printer from the HP website.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Solved Freehand 10 Printing Problem

Similar Messages

Maybe you are looking for