[SOLVED] Getting freezes after using dwm for some time and exiting it
Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)
I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]---
Similar Messages
-
I do not have an Apple computer, I have had Itunes previously but had not used it for some time, I have Itunes gift cards but can not get ,on to use them. I have tried to download Itunes again but the following keeps poping up, "The Itunes library is locked on a locked disc, oryou do not have write permission for this file." How can I overcome this?
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
-
On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends
See:
iOS: Troubleshooting Messages
However, I suspect it is just a tempery network problem beyond your control -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
I rented the movie "Green Hornet". It was downloaded but when i try to play it black screen shows up for some time and then I'm the home screen.
Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
Iphone 3 GS was not being used for some time. When I charged it for use the screen is not becomeing bright. The images are very dim although i increased the brightness. Pls assist.
Since it's a new machine, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. That also might apply to newly bought ones inside the first 90 days.
FWIW, IMO, the AppleCare extended plan's the cheapest insurance you can get for your new desktop machine. -
I have been using the xfinity ap for some time with no problem. Now every time I open the ap it shuts down. I have updated software, reset, done a sync, rebooted to no avail any ideas
My Xfinity App does the same thing. Hope they are coming out with a app update.
-
I have used Firefox for a few years with great success but now I cannot receive my email from the Virgin Media site. The rest of the site is fine but as soon as I click on "Check your e-mail" I get an error message. This is very frustrating.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Click the menu button [[Image:New Fx Menu]], choose History, and then "Clear Recent History...".
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the "Clear Now" button.
Further information can be found in the [[Delete browsing, search and download history on Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.
If this doesn't work, contact Virgin for more assistance. -
IPod suddenly starts playing after being inactive for some time
After using my iPod I press the play/pause button and keep it pressed for some seconds to turn the iPod off.
Some hours later -I don't know exactly how long since this usually occurs overnight- the iPod starts playing music!!!
Am I missing something when turning the iPod off?
Does someone have the same problem?
If so, have you been able to fix it?Is this happening all the time? because i sort of had the same problem..for some unknown reason to me, my iPod kept turning on every morning, and i couldn't find out why. Then i realised i had set the alarm thing on my iPod to 9am every morning, months ago! it could be your alarm setting, otherwise i have no idea! hope i helped!
-
I have loaded about 100 pictures into iPhoto on my new Mac (old PC user) but now am certain that I want to continue with Adobe Photoshop which I have used for quite some time. Should I uninstall iPhoto completely as well as removing the IPhoto Library? Please tell me how best to proceed so as to avoid conflicts.
Thanks,
JerryI currently have Elements 9, but as I said I am a complete novice on the Mac.
When I bought the Mac, I had all of my photos already on an external hd for securitiy purposes, and have since moved them onto the Mac hard drive. I have not yet imported them into iPhoto, although, as I mentioned above I have loaded some pix into iPhoto from a camera just to see how it works. Also I have not yet installed Elements 9 on the Mac.
If I use IPhoto as the program to upload from the camera, do the photos go directly into iPhoto Library?
Does the library function the same as my storing them in My Pictures/My Documents, etc on a pc? Can I move pictures about within the iPhoto Library?
What is the advantage of using both programs simultaneously? If, as TeenTitan mentions above, I could put iPhoto back into the applications folder and not use it at all, and then use Elements 9 as the total package, what features, etc., would I lose?
If I choose to move iPhoto into the app folder, is it a simple matter or dragging it back? If not, how should I do it?
Thanks for your patience. I just want to get off to a clean start with my pictures. -
After running KDE for some time, it will stop suspending on lid close
I can use KDE for a day or two and it will behave just fine, but inevitably, after some time, it will stop going to sleep when I close the lid or after my 15 minute timeout that I have set up in the power manager thing.
A reboot will fix it for a while. This does not happen in Xfce or Gnome. Hitting the suspend button works.
There are about 10,000 things that could affect suspending, so I'm just wondering if anyone else has had a similar problem?I can use KDE for a day or two and it will behave just fine, but inevitably, after some time, it will stop going to sleep when I close the lid or after my 15 minute timeout that I have set up in the power manager thing.
A reboot will fix it for a while. This does not happen in Xfce or Gnome. Hitting the suspend button works.
There are about 10,000 things that could affect suspending, so I'm just wondering if anyone else has had a similar problem? -
My iPad 10W charger isn't work after using it for 2 times only.
I used the new iPad 10w charger for only 2 times and it didn't work.
Does anyone get the same problem as me?There have bee a few reports of faulty chargers. Take your charger, cable & iPad to a Apple Store for evaluation. It will be replaced if defective. Make sure the 30-pin connector is fully seated, especially if you are using a cover.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
Cheers, Tom -
I recently upgraded from my iPhone 3 to iPhone 4s. My old iPhone had not completed a sync in some time because of a faulty cable. But the old phone still will not sync properly even with the new cable.
Now that I have my new iPhone, I would like to first sync the old phone so all the data will be available for the new phone. I would also like to have an extra copy of my audio ebooks on the old iPhone so my husband and I can both listen at the same time using earphones while driving long distances in the car and then discuss the book. We have been unable to do this with the old iPhone alone due to constant road noise.I'm not sure what made the difference, but I tried again and it worked this time. ???????????
-
My Macbook freezes after using it for awhile
I startup my MacBook (aluminum 2008 verions) running lion 10.7.1 and after about 5 minutes of using it, my computer displays the rainbow cursor and freezes. I am unable to click on anything or force quit.
My processor is 2.4 Ghz and has 2Gb ram.
It would be great if someone could give me any thoughts ASAP as I have an assignment due next week and need my computer.
Thanks in advanceYour problem is caused by third-party software that you installed. I'd need more information to be more specific.
Reboot as usual (not in safe mode) if you haven't already done so. Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Next, do the same thing with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Next, this command:
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Again, one line. Finally, one more:
ls -1 /Library/{InputManagers,StartupItems}
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal. -
I lived in the uk and have now lost some of the music I purchased there. Not all of the music. I still have reciept numbers. Can I get it back?
try changing your appleID to whatever you were using when you were acessing the UK store. Then try to re-download the purchased music. I am not sure if re-downloading music works from the UK store, however. It might be US only. If this is the case, you will need to contact iTunes support.
Maybe you are looking for
-
can not retrieve emails from iCloud.
-
Scripting Guide referenced scripts
All over the CS3 scripting guide there are parts of scripts and it says in parentheses (for the complete script, see ...). Where do I find these scripts that are being referenced to?
-
Map marker + geolocation (google maps)
I'm currently working on embedding a google map in my app. The geolocating already works ( I used this code: DPS Tips HTML5 Examples, thanks Bob!), but I just can't add markers to the map. I tried different codes but none seem to work. I would also n
-
How do I know if iCloud really backed up my stuff?
I have recently backed up my stuff with Icloud again and I have less stuff now then I did before but the number of GB has always been the same and has never changed. Does this mean it didnt back up my stuff?
-
BT Infinity and laptop processor compatability
I have just ordered BT Infinity to be installed in October 2012. My laptop is a Toshiba Satellite with an Intel Pentium Dual Core !.60 GHz processor. The laptop utilises Vista Home Edition with Service Pack 2. The RAM memory is 2 GB and have installe