[solved[KERNEL PANIC ARCH-3.4.4-2] can not boot Arch from liveCD (x64)
i have somes problems with several apps and want to fresh installed Arch.
my current file system:
i use: gpt, lvm2, luks, grub2.
/dev/sda1: bios partition
/dev/sda2: boot partition
/dev/sda3: lvm partition (var, usr, usr-local,....home...)
i keep partition structure (cause i want to keep home directory without damage, it's contain my data).
but when i try to boot from livecd to reinstall Arch, this proccess can't be done.
this is output:
mounting: /bootmnt/arch/any/repo-core-any-sys/....
mounting: /bootmnt/arch/x64/.....
I/O error on device sr0, logical block
buffer I/O error on device sr0, logical block
SQUASHFS error: .....
end_request: I/O error, device sr0, sector ....
kernel panic_not syncing: attempted to kill init !
pid: 1 comm: init Not tainted 3.0 - ARCH #1
call trace:
[<fffffffffffffffff812ae6al] panic+0xa0/0x1ad
[<fffffffffffffffff...............] do_exit ...
[.....................................] do_group_exit ...
[.....................................] get_signal_to_diver....
and caps lock & scroll lock blink.
any ideas?
thanks for reply !
EDIT: i tested /dev/sr0 and the result:
sudo mount /dev/sr0 /mnt
mount: /dev/sr0 is write-protected, mounting read-only.
Last edited by angelfalls (2012-07-13 17:09:56)
Yeah that's what I meant. Try to burn a new cd at a slower speed. When the new one is done create a hashsum of the new burn and compare it to the iso you used to burn it with. I only say this because a few times in the past when I had sr0 errors while booting live cds it was because the disk was messed up and I had to burn it again.
Similar Messages
-
Kernel panic won't go away and can't boot?
I am not sure what OS I have. It's an iMac and only a year and a half old. I know it doesn't have leopard and that's about it. Anyway, my problem started two days ago. I got the notification that updates were available so I went ahead and did it. I walked out of the office while it did its thing. Then I heard it say something like "Can't install updates". I was 2 rooms away so that may be wrong. Then it went to restart like normal but it did not boot up. It went to a gray screen with a black box in the middle that said you need to restart your computer in about 4 languages. Well, I did that seemingly a million times and it's still doing it. So I asked someone for help and he gave me these instructions,
1. Restart, and hold down AppleOption+PR to reset the Pram
2. Restart and hold down Apple+S once it brings you to a command prompt, type this:
/sbin/fsck -yf
This command will run a file system check and repair any problems.
3. Restart and hold down AppleOption+OF
when command prompt shows up on screen type:
reset-nvram (then press Enter)
set-defaults (then press Enter)
reset-all (computer will reboot)
The problem comes at step two.. it will not allow me to type anything it. I get something that says "Package 0 didn't get HPET". I can type about 4 letters in and then it restarts that "package 0 didn't get HPET" so I actually can't get the /sbin/fsck -yf part in to even attempt step 3. I bought this computer from someone so I have to disc with it. I've left a voicemail to see if he can fix it or if he has the disc still.
I've never had an issue with this thing before and I've had it since August. It's been an awesome computer and then, this. I can't afford to have it fixed for a few weeks yet and I really need to be able to use it. Classes just started and I need access to my online ones. I was lucky to be able to use what I am on now but I've had to go to someone else's apartment to do so. ANY help would be wonderful. I'm ready to shoot the thing. LOL.You will need the original OS X installer disc that came with the computer or the installer disc you used for the version of OS X presently installed. Since you've provided no machine information other than "iMac" and no information on the version of OS X you are using this advice may or may not work:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
If you cannot start the computer from an installer disc without getting a kernel panic, that means you have a hardware failure - most likely bad RAM. -
[SOLVED] Kernel panic for an unknown reason
[Solved] Steps done to solve it:
0. Panic because I couldn't play starcraft2 (this step is sooo important! ;)
1. Updated my mirrorlist.
2. Forced a refresh on the package list from the new mirrorlist. "pacman -Syy"
3. Downgraded the kernel.
4. Deleted the latest kernel package from the pacman cache.
5. Updated the system. (pacman -Syu)
6. Thanked lilsirecho for helping out!
7. Profit
Hi all
I just did a "pacman -Syu" this afternoon and after that I'm getting kernel panics for unknown reasons.
edit: I had kernel 3.0.4 befure syu and I have kernel 3.0.7 now. I tried downgrading wine and the kernel with no success.
It first happened when I tried to run StarCraft2 with wine. I even created a post looking for help because of that.
Later on I tested another game, just in case, and it crashed too.
Looks like a wine problem, right? Or even a graphics driver problem.
That's what I thought too. But then I tried to update with "yaourt -Syu --aur" and in the first package compression it freezed once again. And it does fail everytime I try to update with yaourt during the compression phase.
What do this situations have in common?
My opinion is that they all require a lot of resources. StarCraft 2 puts my PC at 100% almost all the time. The other game is pretty old, but it freezed during an "environment loading" phase, right when the map was loading. The compression phase of yaourt also consumes a lot of resources.
This is my view of this problem, but I could be completely wrong.
What I need is help finding what is the real source of this kernel panics. I don't know where to look for the logs or the error reports when a kernel panic occurs.
I hope someone can help me trace the problem somehow. I think I'm lost
ty in advance.
cheers!
Last edited by fatum (2011-11-10 23:16:10)lilsirecho wrote:
Possibly caused by a mirror download.
Perhaps you need to revert kernel and insure you have the latest mirrorlist and then syu again.
When I saw your response I thought: "Why should that be true? I downgraded the kernel with no success. Doesn't make much sense".
But then I did what you said:
Downgraded the kernel back to 3.0.4.
Moved the latest mirrorlist.pacnew I had to be the mirrorlist in use.
Then did a "pacman -Syyu".
And, miraculously, it works fine now.
How in the world did you know that could be the reason? It would have been the last possibility I would have thought about, no doubt about that
Thank you very much lilsirecho. Your post really helped me.
Not gonna mark this as SOLVED yet. Yesterday I marked my other thread as solved too soon and I regretted my decision.
I will leave a 1week time-frame to be 100% sure that it is fixed, just in case. -
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
[SOLVED] Can not boot after mishap with clonezilla
Hi
I was trying to back up my computer with Clonezilla. It kept telling me that the drive I was trying to back up (the only hard drive in my laptop and only has Arch Linux installed on it) had a GPT and MBR partition table. I thought that this was odd so booted back into Arch Linux and loaded up gparted and it said that the drive was MBR. So I ran clonezilla again and it said about a command to run to remove the GPT if you are sure that you are using MBR so I went ahead (stupidly) and ran it thinking that everything would be ok and now I can not boot back into my Arch Linux. I just get a black screen with GRUB and a flashing cursor. I think the command that I ran was either:
gdisk -z /dev/sda
or
sdisk -z /dev/sda
I'm not too sure and I should have written it down or researched it first. (That will teach me.) I have booted the computer from a Knoppix DVD and can see all the partitions on the drive (root, swap and home) and also read all the data. I have tried to reinstall grub (install-grub /dev/sda deom the Arch install cd) but this has not worked. I hope that as will most things Linux I can fix this. Please can you point me in direction I need to go to fix this?
Thanks
Robert
Last edited by toca180 (2012-02-25 17:20:11)Hi
I have fixed it. I ran testdisk from Knoppix and let it write out the partition table again as MBR then reinstalled grub from the Arch Linux install CD by doing the following from with in grub:
root (hd0,0)
setup (hd0)
Lesson learnt. I'll read and research before just blindly running commands again. Thank you all for reading.
Thanks
Robert -
[SOLVED] kernel panic - no init found
Hello:
After my last system update, (including kernel) two problems appeared. First the magic files problem, solved with pacman -Qo, delleting and reinstalling (perhaps it has something to do with this problem). Second, this kernel panic when I restarted the pc.
failed to execute /init
kernel panic - no init found
specify init= (or something similar)
I get only these lines as error, before is the message of the freed kernel memory.
At the moment I tried with the solutions that I have find at the forum:
- Run with livecd, mount all (including boot, proc, sys, dev), chroot and
mkinitcpio -p kernel26
- Check if the partitions uuids are the correct ones in grub config.
- Check if I have the symlink to asm in the includes, that someone report on the arch news that could be conflictive (I have a folder there).
- Reinstall the kernel26, mkinitcpio, klibc, etc. all the stuff that I thought that could be related.
- Specify in grub config init=/sbin/init, and check if the file was there-> there was a new message saying that also failed to execute /sbin/init
The problem persists, and google doesn't helps and in the forum I can't find an answer neither. I don't know what else I can do, so all help will be apreciated
Thank you
PD: sorry for my English
SOLVED:
The problem was that mkinitcpio outputed an error with zgrep and I think that it wasn't changing nothing. I reinstalled gzip and no errors were reported, so the new ramdisk was created and now the system boots ok. The error with zgrep I think that it comes from my last upgrade, because I didn't have enough space and a lot of errors in a few packages appeared, the errors were cannot execute or file already exists in the system.
Thanks for the answers.
Last edited by foucelhas (2009-05-13 13:05:02)Seems init is present in the initrd image (very small image?):
1199 blocks
/bin/kinit
/bin/run-init
/init
The initrd path I think it's also correctly setted up:
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /vmlinuz26 root=/dev/disk/by-uuid/bfb12545-43dd-49de-9a70-c8ab9926181c resume=/dev/sda5 ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /vmlinuz26 root=/dev/disk/by-uuid/bfb12545-43dd-49de-9a70-c8ab9926181c ro
initrd /kernel26-fallback.img
I have one separate boot partition, as you say, sda2, and the filesystem/general partition is sda6. I tried to put this names instead the uuids too, but didn't worked.
The fallback image neither helped.
I also tried to check if the partitions are ok (sda2 and sda6), with xfs_check and xfs_repair (filesystem it's xfs).
Last edited by foucelhas (2009-05-13 12:16:12) -
[SOLVED]Kernel Panic when removing (without unmounting) a NTFS Usb pen
Hi,
I am new to Arch linux, and I really like it, but since today i got a problem that i can't solve by myself...
When I plugged my EXT4 or Fat32 usb pen, and remove it without unmounting nothing bad happens, nautilus close the window the icon disapears.. everything is normal.
But if I do the same thing with my Usb pen formatted (on Windows 7) with NTFS, a Kernel Panic appears with a NTFS error code...
It is normal or it is any way to solve the problem ?
Thanks in advance,
Luis Da Costa
Last edited by aliasbody (2010-12-18 13:00:18)I'll reinforce what .:B:. said, removing a device _before_ unmounting it is a very bad idea, you are asking for trouble if you keep doing it regularly and you will probably be here sooner rather than later asking for help to recover your files because of that.
Take my words as a friendly warning, this things have a tendency to come back to bite you at the worst of times, and trying to recover data will take you more time and effort that properly unmounting the device before removing it. -
[SOLVED] Kernel panic at boot due to root FS not found
When I try to boot using a new kernel version (eg. 3.0.1 or 2.6.39), I get a kernel panic with an "init not found" error message. I haven't been able to get any more detailed error messages, but I assume that there's a problem with finding or mounting my root filesystem.
For now, I'm stuck with 2.6.38.7-1, which boots without any problems. (I keep trying the new kernel, then rolling it back using a Live CD.)
I have a shared EXT4 root and boot partition, and I'm using Grub 0.97. Other than that, I'm not sure what information would be helpful in tracking down this problem, and any help would be appreciated.
Last edited by dcecile (2011-08-10 00:41:46)No problem.
Here's my full Grub. It has a lot of trial-and-error entries, and I made *-old copies of my 2.6.38 kernel files:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 2
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux-fallback.img
title Arch Linux Ext4
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux-ext4.img
title Arch Linux Log
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Break
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro rootwait break=y panic=30 vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Nonboot Log
root (hd0,2)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /initramfs-linux.img
title Arch Linux Baduuid Log
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/1ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux LTS
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-lts.img
title Arch Linux LTS Fallback
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-lts-fallback.img
title Arch Linux LTS Log
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/kernel26-lts.img
title Arch Linux Old
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old.img
title Arch Linux Old Fallback
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old-fallback.img
title Arch Linux Old Log
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/kernel26-old.img
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
This is the 3.0 entry that doesn't work:
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux.img
And this is the 2.6.38 entry that does work:
title Arch Linux Old
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old.img
Here's "lsinitcpio /boot/initramfs-linux.img":
./etc
./etc/udev
./etc/udev/udev.conf
./etc/modprobe.d
./etc/modprobe.d/usb-load-ehci-first.conf
./init
./init_functions
./bin
./bin/busybox
./sys
./proc
./dev
./hooks
./hooks/udev
./run
./config
./usr
./usr/bin
./usr/sbin
./lib
./lib/udev
./lib/udev/usb_id
./lib/udev/firmware
./lib/udev/scsi_id
./lib/udev/path_id
./lib/udev/ata_id
./lib/udev/rules.d
./lib/udev/rules.d/50-udev-default.rules
./lib/udev/rules.d/80-drivers.rules
./lib/udev/rules.d/50-firmware.rules
./lib/udev/rules.d/60-persistent-storage.rules
./lib/modules
./lib/modules/3.0-ARCH
./lib/modules/3.0-ARCH/modules.alias.bin
./lib/modules/3.0-ARCH/modules.symbols.bin
./lib/modules/3.0-ARCH/kernel
./lib/modules/3.0-ARCH/kernel/fs
./lib/modules/3.0-ARCH/kernel/fs/ext4
./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/jbd2
./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
./lib/modules/3.0-ARCH/kernel/sound
./lib/modules/3.0-ARCH/kernel/sound/core
./lib/modules/3.0-ARCH/kernel/sound/core/seq
./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers
./lib/modules/3.0-ARCH/kernel/drivers/ata
./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb
./lib/modules/3.0-ARCH/kernel/drivers/usb/core
./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/input
./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
./lib/modules/3.0-ARCH/kernel/lib
./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
./lib/modules/3.0-ARCH/modules.dep.bin
./sbin
./sbin/blkid
./sbin/udevadm
./sbin/modprobe
./sbin/udevd -
WORKAROUND/SOLVED: Kernel panic on Macbook Air 5,2 on Lion 10.7.5 on wake
Hi all. I had been getting plagued by kernel panics with my relatively new Macbook Air (which I otherwise have had no issues with) when I did the following in sequence:
While connected to a power supply, lock screen
Close the lid
Disconnect power supply
Open the lid
For me, this seemed to have been caused by the Automatically adjust brightness option. To access it, go to System Preferences > Displays > Automatically adjust brightness, and uncheck the box. I also unchecked similar options that dim the screen before sleep in Energy Saver. This seems to have fixed it. I'm including the full kernel panic report -- if you're having problems with kernel panics, give it a try. I'm going to see for the next few days if this solves the issue. My guess is that this option and the display driver for this computer are really not playing well together in this version of Lion. I tried various other things:
Disabling bluetooth
Using pmset to set the hibernatemode to 0 as well as 25
Restting SMC
and none of them fixed it. This did, though, or at least it seems that way -- I am going to check for the next few days and see how it does. I am not running any third party kexts, though I do have a few third party launch agents for daemons, servers and such which have been installed via Homebrew. Feel free to comment. I am definitely a little underwhelmed by this kind of behavior coming from what is a several thousand dollar piece investment that is the most important piece of equipment for me to do my work on any given day, but if I can bypass it for now without too much of a loss in functionality, so be it.
Wed Nov 14 18:06:10 2012
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816a11f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010c0c4000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x3f1cb290b54fb5d7, RBX: 0xffffff80d17da000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80ef5cbb60, RBP: 0xffffff80ef5cbb70, RSI: 0x00000000b513b5c6, RDI: 0xffffff80d17da000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0x0000000000000200
R12: 0xffffff80d17da000, R13: 0x0000000000000000, R14: 0xffffff80d17da000, R15: 0xffffff80ef5cbbc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816a11f1, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x000000010c0c4000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80ef5cb810 : 0xffffff8000220792
0xffffff80ef5cb890 : 0xffffff80002c4794
0xffffff80ef5cba40 : 0xffffff80002da55d
0xffffff80ef5cba60 : 0xffffff7f816a11f1
0xffffff80ef5cbb70 : 0xffffff7f816a2413
0xffffff80ef5cbbb0 : 0xffffff7f81691e31
0xffffff80ef5cbca0 : 0xffffff7f816aec05
0xffffff80ef5cbce0 : 0xffffff7f81690257
0xffffff80ef5cbd10 : 0xffffff7f80c92832
0xffffff80ef5cbd50 : 0xffffff7f817184f0
0xffffff80ef5cbda0 : 0xffffff7f8171a692
0xffffff80ef5cbde0 : 0xffffff7f8171a7c4
0xffffff80ef5cbe20 : 0xffffff7f80c964c5
0xffffff80ef5cbe60 : 0xffffff7f80c96628
0xffffff80ef5cbe90 : 0xffffff7f80c99fd7
0xffffff80ef5cbef0 : 0xffffff800063d4d6
0xffffff80ef5cbf30 : 0xffffff800063c250
0xffffff80ef5cbf70 : 0xffffff800063c0f4
0xffffff80ef5cbfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000->0xffffff7f80cbffff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f8170d000->0xffffff7f8176afff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f80c30000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f8168d000->0xffffff7f816f3fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 108364440503
last loaded kext at 59338179474: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f807d9000, size 241664)
last unloaded kext at 78468272086: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814c7000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.7.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.75
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4As far as my question itself -- why does this happen? Has anybody had this issue on Lion and had it resolved on Mountain Lion?
-
[SOLVED] Kernel panic USB3 ExHDD (perhaps related to uas module?)
Greetings fellow Arch users!
Annoying problem:
Hitachi Touro Pro 1GB USB 3 external drive causing consistent, repeatable kernel panic on 3.15.2-1-ARCH #1 SMP PREEMPT. The same panic occurs whether the drive is already attached upon reboot or attached later. The same panic occurs whether this drive is attached to the front USB3 header or the rear of the case. The panic also occurs when all other external drives are removed from the machine. The drive is does not panic when attached by USB 2, but it is also not recognized by the system when attached to USB2.
Would prefer to post the photo I took, but unclear where online I could store it. Anyhow, the panic always says:
kernel BUG at block/blk-core.c:2511!
invalid opcode: 0000 [#1} PREEMPT SMP
kernel panic - not syncing: Fatal exception in interrupt
Shutting down CPUs with NMI
My bios is updated (ASUSP8Z68-V PRO/GEN3, BIOS 3603). I searched the forums and noticed a recent, similar problem related to uas module https://bbs.archlinux.org/viewtopic.php?id=183190. I blacklisted the uas module, and also added the text install uas /bin/false to the blacklist.conf file. Updated the kernel (mkinitcpio -p linux afterword, then rebooted). However, note that the uas module is still listed under modules below. Perhaps I need to do something more to prevent this uas module from loading? It seems like blacklisting had some effect: now I can attach the drive and no panic. However, the drive is also not recognized by the system. Other info:
dmesg: (note there are several ACPI warnings here - any ideas?)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 27 07:41:19 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000be38ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be390000-0x00000000be5f6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be5f7000-0x00000000be67afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be67b000-0x00000000be93ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be940000-0x00000000beb84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beb85000-0x00000000beb92fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beb93000-0x00000000bebbffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bebc0000-0x00000000bebc4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bebc5000-0x00000000bec07fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bec08000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x0c5f3018-0x0c603057] usable ==> usable
[ 0.000000] e820: update [mem 0x0c604018-0x0c613857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000c5f3017] usable
[ 0.000000] reserve setup_data: [mem 0x000000000c5f3018-0x000000000c603057] usable
[ 0.000000] reserve setup_data: [mem 0x000000000c603058-0x000000000c604017] usable
[ 0.000000] reserve setup_data: [mem 0x000000000c604018-0x000000000c613857] usable
[ 0.000000] reserve setup_data: [mem 0x000000000c613858-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040200000-0x00000000be38ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000be390000-0x00000000be5f6fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000be5f7000-0x00000000be67afff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be67b000-0x00000000be93ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000be940000-0x00000000beb84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000beb85000-0x00000000beb92fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000beb93000-0x00000000bebbffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bebc0000-0x00000000bebc4fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bebc5000-0x00000000bec07fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bec08000-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf800000-0x00000000df9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xbeb85000 ACPI 2.0=0xbeb85000 SMBIOS=0xbe428e98 MPS=0xfc9b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x000000000000e000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem10: type=4, attr=0xf, range=[0x0000000001100000-0x00000000013d7000) (2MB)
[ 0.000000] efi: mem11: type=3, attr=0xf, range=[0x00000000013d7000-0x00000000013db000) (0MB)
[ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x00000000013db000-0x000000000198a000) (5MB)
[ 0.000000] efi: mem13: type=3, attr=0xf, range=[0x000000000198a000-0x000000000198c000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x000000000198c000-0x000000000198f000) (0MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x000000000198f000-0x000000000199c000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000000199c000-0x0000000001d9f000) (4MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x0000000001d9f000-0x0000000001da0000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x0000000001da0000-0x0000000001da5000) (0MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x0000000001da5000-0x0000000001da6000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000001da6000-0x0000000001da9000) (0MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x0000000001da9000-0x0000000001daa000) (0MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x0000000001daa000-0x0000000001dad000) (0MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x0000000001dad000-0x0000000001dae000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x0000000001dae000-0x0000000001db0000) (0MB)
[ 0.000000] efi: mem25: type=3, attr=0xf, range=[0x0000000001db0000-0x0000000001db1000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000001db1000-0x0000000001dbb000) (0MB)
[ 0.000000] efi: mem27: type=3, attr=0xf, range=[0x0000000001dbb000-0x0000000001dc1000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000001dc1000-0x0000000001dc3000) (0MB)
[ 0.000000] efi: mem29: type=3, attr=0xf, range=[0x0000000001dc3000-0x0000000001dc4000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x0000000001dc4000-0x0000000001dc9000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x0000000001dc9000-0x0000000001dcb000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x0000000001dcb000-0x0000000001dd1000) (0MB)
[ 0.000000] efi: mem33: type=3, attr=0xf, range=[0x0000000001dd1000-0x0000000001dd4000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000001dd4000-0x0000000001de2000) (0MB)
[ 0.000000] efi: mem35: type=3, attr=0xf, range=[0x0000000001de2000-0x0000000001de4000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000001de4000-0x0000000001de6000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x0000000001de6000-0x0000000001de9000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x0000000001de9000-0x0000000001dea000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x0000000001dea000-0x0000000001deb000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000001deb000-0x0000000001def000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x0000000001def000-0x0000000001df1000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x0000000001df1000-0x0000000001df3000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x0000000001df3000-0x0000000001df7000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x0000000001df7000-0x0000000001dff000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x0000000001dff000-0x0000000001e03000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x0000000001e03000-0x0000000001e08000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x0000000001e08000-0x0000000001e0a000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x0000000001e0a000-0x0000000001e1a000) (0MB)
[ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x0000000001e1a000-0x0000000001e1e000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x0000000001e1e000-0x0000000001e22000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x0000000001e22000-0x0000000001e23000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x0000000001e23000-0x0000000001e43000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x0000000001e43000-0x0000000001e44000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x0000000001e44000-0x0000000001e50000) (0MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x0000000001e50000-0x0000000001e53000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x0000000001e53000-0x0000000001e6a000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x0000000001e6a000-0x0000000001e76000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x0000000001e76000-0x0000000001e85000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x0000000001e85000-0x0000000001e88000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x0000000001e88000-0x0000000001e8a000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x0000000001e8a000-0x0000000001e8b000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x0000000001e8b000-0x000000000229d000) (4MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x000000000229d000-0x000000000229e000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000000229e000-0x00000000022a3000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000022a3000-0x00000000022a7000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000022a7000-0x00000000022a8000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000022a8000-0x00000000022ad000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000022ad000-0x00000000022b9000) (0MB)
[ 0.000000] efi: mem69: type=3, attr=0xf, range=[0x00000000022b9000-0x00000000022bf000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000022bf000-0x00000000022c3000) (0MB)
[ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x00000000022c3000-0x00000000022c6000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000022c6000-0x00000000022c7000) (0MB)
[ 0.000000] efi: mem73: type=3, attr=0xf, range=[0x00000000022c7000-0x00000000022c8000) (0MB)
[ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x00000000022c8000-0x00000000022cd000) (0MB)
[ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x00000000022cd000-0x00000000022cf000) (0MB)
[ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x00000000022cf000-0x00000000022d4000) (0MB)
[ 0.000000] efi: mem77: type=3, attr=0xf, range=[0x00000000022d4000-0x00000000022d5000) (0MB)
[ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x00000000022d5000-0x00000000022f2000) (0MB)
[ 0.000000] efi: mem79: type=3, attr=0xf, range=[0x00000000022f2000-0x00000000022ff000) (0MB)
[ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x00000000022ff000-0x000000000230c000) (0MB)
[ 0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000000230c000-0x0000000002311000) (0MB)
[ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x0000000002311000-0x000000000231d000) (0MB)
[ 0.000000] efi: mem83: type=3, attr=0xf, range=[0x000000000231d000-0x0000000002323000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x0000000002323000-0x0000000002326000) (0MB)
[ 0.000000] efi: mem85: type=3, attr=0xf, range=[0x0000000002326000-0x0000000002329000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x0000000002329000-0x000000000232e000) (0MB)
[ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x000000000232e000-0x000000000232f000) (0MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000000232f000-0x000000000233f000) (0MB)
[ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x000000000233f000-0x0000000002349000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x0000000002349000-0x000000000235f000) (0MB)
[ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x000000000235f000-0x000000000236a000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x000000000236a000-0x000000000236e000) (0MB)
[ 0.000000] efi: mem93: type=3, attr=0xf, range=[0x000000000236e000-0x0000000002370000) (0MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x0000000002370000-0x0000000002376000) (0MB)
[ 0.000000] efi: mem95: type=3, attr=0xf, range=[0x0000000002376000-0x0000000002379000) (0MB)
[ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x0000000002379000-0x0000000002380000) (0MB)
[ 0.000000] efi: mem97: type=3, attr=0xf, range=[0x0000000002380000-0x0000000002383000) (0MB)
[ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x0000000002383000-0x0000000002389000) (0MB)
[ 0.000000] efi: mem99: type=3, attr=0xf, range=[0x0000000002389000-0x000000000238f000) (0MB)
[ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000000238f000-0x0000000002398000) (0MB)
[ 0.000000] efi: mem101: type=3, attr=0xf, range=[0x0000000002398000-0x000000000239b000) (0MB)
[ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000000239b000-0x000000000239c000) (0MB)
[ 0.000000] efi: mem103: type=3, attr=0xf, range=[0x000000000239c000-0x00000000023aa000) (0MB)
[ 0.000000] efi: mem104: type=4, attr=0xf, range=[0x00000000023aa000-0x00000000023b3000) (0MB)
[ 0.000000] efi: mem105: type=3, attr=0xf, range=[0x00000000023b3000-0x00000000023c8000) (0MB)
[ 0.000000] efi: mem106: type=4, attr=0xf, range=[0x00000000023c8000-0x00000000023cd000) (0MB)
[ 0.000000] efi: mem107: type=3, attr=0xf, range=[0x00000000023cd000-0x00000000023ce000) (0MB)
[ 0.000000] efi: mem108: type=4, attr=0xf, range=[0x00000000023ce000-0x00000000023cf000) (0MB)
[ 0.000000] efi: mem109: type=3, attr=0xf, range=[0x00000000023cf000-0x00000000023d1000) (0MB)
[ 0.000000] efi: mem110: type=4, attr=0xf, range=[0x00000000023d1000-0x00000000023d6000) (0MB)
[ 0.000000] efi: mem111: type=3, attr=0xf, range=[0x00000000023d6000-0x00000000023d8000) (0MB)
[ 0.000000] efi: mem112: type=4, attr=0xf, range=[0x00000000023d8000-0x00000000023d9000) (0MB)
[ 0.000000] efi: mem113: type=3, attr=0xf, range=[0x00000000023d9000-0x00000000023dc000) (0MB)
[ 0.000000] efi: mem114: type=4, attr=0xf, range=[0x00000000023dc000-0x00000000023e0000) (0MB)
[ 0.000000] efi: mem115: type=3, attr=0xf, range=[0x00000000023e0000-0x00000000023e2000) (0MB)
[ 0.000000] efi: mem116: type=4, attr=0xf, range=[0x00000000023e2000-0x00000000023e6000) (0MB)
[ 0.000000] efi: mem117: type=3, attr=0xf, range=[0x00000000023e6000-0x00000000023eb000) (0MB)
[ 0.000000] efi: mem118: type=4, attr=0xf, range=[0x00000000023eb000-0x00000000023fc000) (0MB)
[ 0.000000] efi: mem119: type=3, attr=0xf, range=[0x00000000023fc000-0x0000000002402000) (0MB)
[ 0.000000] efi: mem120: type=4, attr=0xf, range=[0x0000000002402000-0x0000000002409000) (0MB)
[ 0.000000] efi: mem121: type=3, attr=0xf, range=[0x0000000002409000-0x0000000002410000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x0000000002410000-0x000000000243e000) (0MB)
[ 0.000000] efi: mem123: type=3, attr=0xf, range=[0x000000000243e000-0x0000000002445000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x0000000002445000-0x000000000245a000) (0MB)
[ 0.000000] efi: mem125: type=3, attr=0xf, range=[0x000000000245a000-0x0000000002464000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x0000000002464000-0x0000000002471000) (0MB)
[ 0.000000] efi: mem127: type=3, attr=0xf, range=[0x0000000002471000-0x0000000002473000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x0000000002473000-0x0000000002474000) (0MB)
[ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x0000000002474000-0x0000000002476000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x0000000002476000-0x0000000002478000) (0MB)
[ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x0000000002478000-0x00000000024b6000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000024b6000-0x00000000024db000) (0MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x00000000024db000-0x0000000002506000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x0000000002506000-0x000000000251c000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x000000000251c000-0x0000000002520000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x0000000002520000-0x0000000002522000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x0000000002522000-0x0000000002532000) (0MB)
[ 0.000000] efi: mem138: type=4, attr=0xf, range=[0x0000000002532000-0x0000000002536000) (0MB)
[ 0.000000] efi: mem139: type=3, attr=0xf, range=[0x0000000002536000-0x0000000002538000) (0MB)
[ 0.000000] efi: mem140: type=4, attr=0xf, range=[0x0000000002538000-0x0000000002558000) (0MB)
[ 0.000000] efi: mem141: type=3, attr=0xf, range=[0x0000000002558000-0x000000000255f000) (0MB)
[ 0.000000] efi: mem142: type=4, attr=0xf, range=[0x000000000255f000-0x000000000257e000) (0MB)
[ 0.000000] efi: mem143: type=3, attr=0xf, range=[0x000000000257e000-0x0000000002591000) (0MB)
[ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x0000000002591000-0x0000000002599000) (0MB)
[ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x0000000002599000-0x000000000259c000) (0MB)
[ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000000259c000-0x00000000025a3000) (0MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000025a3000-0x00000000025a5000) (0MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000025a5000-0x00000000025a6000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000025a6000-0x00000000025ab000) (0MB)
[ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x00000000025ab000-0x00000000025ad000) (0MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000025ad000-0x00000000025af000) (0MB)
[ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x00000000025af000-0x00000000025b1000) (0MB)
[ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x00000000025b1000-0x00000000025b4000) (0MB)
[ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x00000000025b4000-0x00000000025ba000) (0MB)
[ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x00000000025ba000-0x00000000025bd000) (0MB)
[ 0.000000] efi: mem156: type=4, attr=0xf, range=[0x00000000025bd000-0x00000000026a9000) (0MB)
[ 0.000000] efi: mem157: type=3, attr=0xf, range=[0x00000000026a9000-0x0000000002ab7000) (4MB)
[ 0.000000] efi: mem158: type=4, attr=0xf, range=[0x0000000002ab7000-0x000000000c181000) (150MB)
[ 0.000000] efi: mem159: type=3, attr=0xf, range=[0x000000000c181000-0x000000000c187000) (0MB)
[ 0.000000] efi: mem160: type=4, attr=0xf, range=[0x000000000c187000-0x000000000c18f000) (0MB)
[ 0.000000] efi: mem161: type=3, attr=0xf, range=[0x000000000c18f000-0x000000000c191000) (0MB)
[ 0.000000] efi: mem162: type=4, attr=0xf, range=[0x000000000c191000-0x000000000c2ff000) (1MB)
[ 0.000000] efi: mem163: type=3, attr=0xf, range=[0x000000000c2ff000-0x000000000c319000) (0MB)
[ 0.000000] efi: mem164: type=4, attr=0xf, range=[0x000000000c319000-0x000000000c3cf000) (0MB)
[ 0.000000] efi: mem165: type=2, attr=0xf, range=[0x000000000c3cf000-0x000000000c3d2000) (0MB)
[ 0.000000] efi: mem166: type=7, attr=0xf, range=[0x000000000c3d2000-0x000000000c3d3000) (0MB)
[ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x000000000c3d3000-0x000000000c3ff000) (0MB)
[ 0.000000] efi: mem168: type=2, attr=0xf, range=[0x000000000c3ff000-0x000000000c403000) (0MB)
[ 0.000000] efi: mem169: type=7, attr=0xf, range=[0x000000000c403000-0x000000000c407000) (0MB)
[ 0.000000] efi: mem170: type=1, attr=0xf, range=[0x000000000c407000-0x000000000c41e000) (0MB)
[ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x000000000c41e000-0x000000000c5f3000) (1MB)
[ 0.000000] efi: mem172: type=2, attr=0xf, range=[0x000000000c5f3000-0x000000000c614000) (0MB)
[ 0.000000] efi: mem173: type=7, attr=0xf, range=[0x000000000c614000-0x000000000c9af000) (3MB)
[ 0.000000] efi: mem174: type=1, attr=0xf, range=[0x000000000c9af000-0x000000000cd6b000) (3MB)
[ 0.000000] efi: mem175: type=7, attr=0xf, range=[0x000000000cd6b000-0x000000000d000000) (2MB)
[ 0.000000] efi: mem176: type=2, attr=0xf, range=[0x000000000d000000-0x000000000df60000) (15MB)
[ 0.000000] efi: mem177: type=7, attr=0xf, range=[0x000000000df60000-0x0000000020000000) (288MB)
[ 0.000000] efi: mem178: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem179: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040000000) (510MB)
[ 0.000000] efi: mem180: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB)
[ 0.000000] efi: mem181: type=7, attr=0xf, range=[0x0000000040200000-0x000000007fbac000) (1017MB)
[ 0.000000] efi: mem182: type=2, attr=0xf, range=[0x000000007fbac000-0x0000000080000000) (4MB)
[ 0.000000] efi: mem183: type=7, attr=0xf, range=[0x0000000080000000-0x00000000be390000) (995MB)
[ 0.000000] efi: mem184: type=5, attr=0x800000000000000f, range=[0x00000000be390000-0x00000000be3d5000) (0MB)
[ 0.000000] efi: mem185: type=6, attr=0x800000000000000f, range=[0x00000000be3d5000-0x00000000be405000) (0MB)
[ 0.000000] efi: mem186: type=5, attr=0x800000000000000f, range=[0x00000000be405000-0x00000000be416000) (0MB)
[ 0.000000] efi: mem187: type=6, attr=0x800000000000000f, range=[0x00000000be416000-0x00000000be424000) (0MB)
[ 0.000000] efi: mem188: type=6, attr=0x800000000000000f, range=[0x00000000be424000-0x00000000be426000) (0MB)
[ 0.000000] efi: mem189: type=6, attr=0x800000000000000f, range=[0x00000000be426000-0x00000000be428000) (0MB)
[ 0.000000] efi: mem190: type=6, attr=0x800000000000000f, range=[0x00000000be428000-0x00000000be440000) (0MB)
[ 0.000000] efi: mem191: type=0, attr=0xf, range=[0x00000000be440000-0x00000000be5f7000) (1MB)
[ 0.000000] efi: mem192: type=10, attr=0xf, range=[0x00000000be5f7000-0x00000000be67b000) (0MB)
[ 0.000000] efi: mem193: type=0, attr=0xf, range=[0x00000000be67b000-0x00000000be8d5000) (2MB)
[ 0.000000] efi: mem194: type=0, attr=0xf, range=[0x00000000be8d5000-0x00000000be8e4000) (0MB)
[ 0.000000] efi: mem195: type=0, attr=0xf, range=[0x00000000be8e4000-0x00000000be8e6000) (0MB)
[ 0.000000] efi: mem196: type=0, attr=0xf, range=[0x00000000be8e6000-0x00000000be8ed000) (0MB)
[ 0.000000] efi: mem197: type=0, attr=0xf, range=[0x00000000be8ed000-0x00000000be940000) (0MB)
[ 0.000000] efi: mem198: type=10, attr=0xf, range=[0x00000000be940000-0x00000000be944000) (0MB)
[ 0.000000] efi: mem199: type=10, attr=0xf, range=[0x00000000be944000-0x00000000beb85000) (2MB)
[ 0.000000] efi: mem200: type=9, attr=0xf, range=[0x00000000beb85000-0x00000000beb93000) (0MB)
[ 0.000000] efi: mem201: type=10, attr=0xf, range=[0x00000000beb93000-0x00000000beba4000) (0MB)
[ 0.000000] efi: mem202: type=10, attr=0xf, range=[0x00000000beba4000-0x00000000beba7000) (0MB)
[ 0.000000] efi: mem203: type=10, attr=0xf, range=[0x00000000beba7000-0x00000000bebb2000) (0MB)
[ 0.000000] efi: mem204: type=10, attr=0xf, range=[0x00000000bebb2000-0x00000000bebbb000) (0MB)
[ 0.000000] efi: mem205: type=10, attr=0xf, range=[0x00000000bebbb000-0x00000000bebc0000) (0MB)
[ 0.000000] efi: mem206: type=9, attr=0xf, range=[0x00000000bebc0000-0x00000000bebc4000) (0MB)
[ 0.000000] efi: mem207: type=9, attr=0xf, range=[0x00000000bebc4000-0x00000000bebc5000) (0MB)
[ 0.000000] efi: mem208: type=10, attr=0xf, range=[0x00000000bebc5000-0x00000000bec08000) (0MB)
[ 0.000000] efi: mem209: type=4, attr=0xf, range=[0x00000000bec08000-0x00000000bed4e000) (1MB)
[ 0.000000] efi: mem210: type=3, attr=0xf, range=[0x00000000bed4e000-0x00000000befda000) (2MB)
[ 0.000000] efi: mem211: type=4, attr=0xf, range=[0x00000000befda000-0x00000000befe3000) (0MB)
[ 0.000000] efi: mem212: type=3, attr=0xf, range=[0x00000000befe3000-0x00000000befed000) (0MB)
[ 0.000000] efi: mem213: type=4, attr=0xf, range=[0x00000000befed000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem214: type=7, attr=0xf, range=[0x0000000100000000-0x000000041f600000) (12790MB)
[ 0.000000] efi: mem215: type=0, attr=0x8000000000000000, range=[0x00000000bf800000-0x00000000dfa00000) (514MB)
[ 0.000000] efi: mem216: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem217: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem218: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem219: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem220: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem221: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO GEN3, BIOS 3603 11/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 41F800000 mask FFF800000 uncachable
[ 0.000000] 5 base 41F600000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f] mapped at [ffff8800000fcd90]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0db3e000, 0x0db3efff] PGTABLE
[ 0.000000] BRK [0x0db3f000, 0x0db3ffff] PGTABLE
[ 0.000000] BRK [0x0db40000, 0x0db40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
[ 0.000000] [mem 0x41f400000-0x41f5fffff] page 2M
[ 0.000000] BRK [0x0db41000, 0x0db41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41f3fffff]
[ 0.000000] [mem 0x41c000000-0x41f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbe38ffff]
[ 0.000000] [mem 0x40200000-0xbe1fffff] page 2M
[ 0.000000] [mem 0xbe200000-0xbe38ffff] page 4k
[ 0.000000] BRK [0x0db42000, 0x0db42fff] PGTABLE
[ 0.000000] BRK [0x0db43000, 0x0db43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbec08000-0xbeffffff]
[ 0.000000] [mem 0xbec08000-0xbedfffff] page 4k
[ 0.000000] [mem 0xbee00000-0xbeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fbac000-0x7fffffff]
[ 0.000000] ACPI: RSDP 0x00000000BEB85000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEB85078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEB90C70 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BEB85170 00BAFE (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEBBEF80 000040
[ 0.000000] ACPI: APIC 0x00000000BEB90D68 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEB90DE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BEB90E20 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEB90E58 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000BEB911C8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BEB91B78 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000BEB92668 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
[ 0.000000] NODE_DATA [mem 0x41f5ed000-0x41f5f1fff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbe38ffff]
[ 0.000000] node 0: [mem 0xbec08000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x41f5fffff]
[ 0.000000] On node 0 totalpages: 4053286
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12111 pages used for memmap
[ 0.000000] DMA32 zone: 775048 pages, LIFO batch:31
[ 0.000000] Normal zone: 51160 pages used for memmap
[ 0.000000] Normal zone: 3274240 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbfa00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0c5f3000-0x0c5f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0c603000-0x0c603fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0c604000-0x0c604fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0c613000-0x0c613fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe390000-0xbe5f6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe5f7000-0xbe67afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe67b000-0xbe93ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe940000-0xbeb84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeb85000-0xbeb92fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeb93000-0xbebbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbebc0000-0xbebc4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbebc5000-0xbec07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041f200000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3989793
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15686384K/16213144K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 526760K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 65011712 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3310.903 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.71 BogoMIPS (lpj=11036343)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20140214
[ 0.005686] ACPI: All ACPI Tables successfully acquired
[ 0.224422] Security Framework initialized
[ 0.224427] Yama: becoming mindful.
[ 0.225168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.227553] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.228571] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.228586] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.228762] Initializing cgroup subsys memory
[ 0.228765] Initializing cgroup subsys devices
[ 0.228766] Initializing cgroup subsys freezer
[ 0.228767] Initializing cgroup subsys net_cls
[ 0.228768] Initializing cgroup subsys blkio
[ 0.228783] CPU: Physical Processor ID: 0
[ 0.228784] CPU: Processor Core ID: 0
[ 0.228787] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.228789] mce: CPU supports 9 MCE banks
[ 0.228799] CPU0: Thermal monitoring enabled (TM1)
[ 0.228808] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.228875] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.233934] ftrace: allocating 20223 entries in 79 pages
[ 0.241630] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.274603] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.274609] TSC deadline timer enabled
[ 0.274616] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.274622] ... version: 3
[ 0.274623] ... bit width: 48
[ 0.274623] ... generic registers: 8
[ 0.274624] ... value mask: 0000ffffffffffff
[ 0.274625] ... max period: 0000ffffffffffff
[ 0.274625] ... fixed-purpose events: 3
[ 0.274626] ... event mask: 00000007000000ff
[ 0.298004] x86: Booting SMP configuration:
[ 0.298007] .... node #0, CPUs: #1
[ 0.311168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.311330] #2 #3
[ 0.337783] x86: Booted up 1 node, 4 CPUs
[ 0.337786] smpboot: Total of 4 processors activated (26497.85 BogoMIPS)
[ 0.340161] devtmpfs: initialized
[ 0.342662] PM: Registering ACPI NVS region [mem 0xbe5f7000-0xbe67afff] (540672 bytes)
[ 0.342669] PM: Registering ACPI NVS region [mem 0xbe940000-0xbeb84fff] (2379776 bytes)
[ 0.342692] PM: Registering ACPI NVS region [mem 0xbeb93000-0xbebbffff] (184320 bytes)
[ 0.342695] PM: Registering ACPI NVS region [mem 0xbebc5000-0xbec07fff] (274432 bytes)
[ 0.343283] pinctrl core: initialized pinctrl subsystem
[ 0.343314] RTC time: 17:36:55, date: 06/28/14
[ 0.343349] NET: Registered protocol family 16
[ 0.343410] cpuidle: using governor ladder
[ 0.343411] cpuidle: using governor menu
[ 0.343434] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.343436] ACPI: bus type PCI registered
[ 0.343437] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.343477] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.343479] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.349799] PCI: Using configuration type 1 for base access
[ 0.350482] ACPI: Added _OSI(Module Device)
[ 0.350483] ACPI: Added _OSI(Processor Device)
[ 0.350484] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.350485] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.352637] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.363641] ACPI: SSDT 0x00000000BE8ED018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.363914] ACPI: Dynamic OEM Table Load:
[ 0.363916] ACPI: SSDT 0x0000000000000000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.373527] ACPI: SSDT 0x00000000BE8EEA98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.373839] ACPI: Dynamic OEM Table Load:
[ 0.373840] ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.383434] ACPI: SSDT 0x00000000BE8EFC18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.383709] ACPI: Dynamic OEM Table Load:
[ 0.383710] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.393757] ACPI: Interpreter enabled
[ 0.393764] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.393773] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.393775] ACPI: Using IOAPIC for interrupt routing
[ 0.393792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.398293] ACPI: Power Resource [FN00] (off)
[ 0.398349] ACPI: Power Resource [FN01] (off)
[ 0.398403] ACPI: Power Resource [FN02] (off)
[ 0.398459] ACPI: Power Resource [FN03] (off)
[ 0.398512] ACPI: Power Resource [FN04] (off)
[ 0.398770] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.398773] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.398775] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.398779] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.398942] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.398946] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.398990] \_SB_.PCI0:_OSC invalid UUID
[ 0.398991] _OSC request data:1 1f 0
[ 0.398994] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.399451] PCI host bridge to bus 0000:00
[ 0.399454] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.399455] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.399457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.399458] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.399459] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.399460] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.399461] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.399462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.399464] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.399470] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.399543] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.399568] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.399603] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.399635] pci 0000:00:02.0: [8086:0112] type 00 class 0x030000
[ 0.399643] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.399647] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.399651] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.399739] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.399760] pci 0000:00:16.0: reg 0x10: [mem 0xf7f2c000-0xf7f2c00f 64bit]
[ 0.399831] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.399906] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.399923] pci 0000:00:19.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff]
[ 0.399931] pci 0000:00:19.0: reg 0x14: [mem 0xf7f29000-0xf7f29fff]
[ 0.399939] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.400001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.400041] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.400076] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.400095] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f28000-0xf7f283ff]
[ 0.400180] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.400231] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.400264] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.400276] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f20000-0xf7f23fff 64bit]
[ 0.400338] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.400379] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.400409] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.400485] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.400528] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.400558] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.400634] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.400676] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.400708] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.400783] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.400826] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.400857] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.400934] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.400977] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.401012] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.401032] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f27000-0xf7f273ff]
[ 0.401117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.401188] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[ 0.401347] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.401364] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.401371] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.401378] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.401386] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.401393] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.401400] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f26000-0xf7f267ff]
[ 0.401442] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.401504] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.401518] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f25000-0xf7f250ff 64bit]
[ 0.401537] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.401633] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.401689] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.401778] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.401806] pci 0000:03:00.0: reg 0x10: [mem 0xf7e00000-0xf7e07fff 64bit]
[ 0.401961] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.401996] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.406680] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.406688] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.406813] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.406841] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d07fff 64bit]
[ 0.406996] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.407031] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.413342] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.413351] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.413462] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401
[ 0.413584] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.413608] pci 0000:00:1c.6: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.413612] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
[ 0.413616] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.413621] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.413623] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.413624] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.413625] pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.413626] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.413627] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.413629] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.413630] pci 0000:00:1c.6: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[ 0.413694] pci 0000:06:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.413725] pci 0000:06:02.0: reg 0x10: [mem 0xf7c00000-0xf7c007ff]
[ 0.413743] pci 0000:06:02.0: reg 0x14: [io 0xe000-0xe07f]
[ 0.413873] pci 0000:06:02.0: supports D2
[ 0.413874] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold
[ 0.413979] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.413989] pci 0000:05:00.0: bridge window [io 0xe000-0xefff]
[ 0.413995] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.414004] pci 0000:05:00.0: bridge window [io 0xe000-0xefff] (subtractive decode)
[ 0.414005] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[ 0.414007] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.414008] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.414009] pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.414010] pci 0000:05:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.414012] pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.414013] pci 0000:05:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.414014] pci 0000:05:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.414015] pci 0000:05:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.414016] pci 0000:05:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.414018] pci 0000:05:00.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[ 0.414205] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414243] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.414279] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.414350] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.414386] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414422] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.414456] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.414535] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.414550] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.414607] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.414609] vgaarb: loaded
[ 0.414610] vgaarb: bridge control possible 0000:00:02.0
[ 0.414661] PCI: Using ACPI for IRQ routing
[ 0.416047] PCI: pci_cache_line_size set to 64 bytes
[ 0.416097] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.416098] e820: reserve RAM buffer [mem 0x0c5f3018-0x0fffffff]
[ 0.416100] e820: reserve RAM buffer [mem 0x0c604018-0x0fffffff]
[ 0.416101] e820: reserve RAM buffer [mem 0xbe390000-0xbfffffff]
[ 0.416102] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.416103] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[ 0.416165] NetLabel: Initializing
[ 0.416166] NetLabel: domain hash size = 128
[ 0.416166] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.416175] NetLabel: unlabeled traffic allowed by default
[ 0.416188] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.416191] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.418207] Switched to clocksource hpet
[ 0.421414] pnp: PnP ACPI init
[ 0.421426] ACPI: bus type PNP registered
[ 0.421493] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.421496] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421505] pnp 00:01: [dma 4]
[ 0.421517] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.421533] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.421608] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.421640] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.421642] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.421643] system 00:04: [io 0xffff] has been reserved
[ 0.421644] system 00:04: [io 0xffff] has been reserved
[ 0.421646] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.421647] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.421649] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.421650] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.421652] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421676] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421712] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.421714] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421774] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.421776] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421812] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.421814] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421834] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.422038] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.422039] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.422041] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.422042] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.422043] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.422045] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.422046] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.422048] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.422049] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.422050] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.422052] system 00:0a: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.422053] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.422164] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.422165] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.422167] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.422182] pnp: PnP ACPI: found 12 devices
[ 0.422183] ACPI: bus type PNP unregistered
[ 0.428211] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.428213] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.428214] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.428250] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.428252] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.428253] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.428258] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 0.428262] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.428264] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.428265] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.428270] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.428272] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.428277] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
[ 0.428281] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.428286] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.428291] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.428298] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.428303] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.428310] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.428314] pci 0000:05:00.0: bridge window [io 0xe000-0xefff]
[ 0.428322] pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.428335] pci 0000:00:1c.6: PCI bridge to [bus 05-06]
[ 0.428338] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
[ 0.428342] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.428350] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.428352] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.428353] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.428354] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.428355] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.428357] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.428358] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.428359] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff]
[ 0.428360] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.428362] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
[ 0.428363] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.428364] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.428366] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.428367] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.428368] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.428369] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.428370] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.428372] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.428373] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.428374] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.428375] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.428376] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.428378] pci_bus 0000:05: resource 11 [mem 0xdfa00000-0xfeafffff]
[ 0.428379] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.428380] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.428381] pci_bus 0000:06: resource 4 [io 0xe000-0xefff]
[ 0.428382] pci_bus 0000:06: resource 5 [mem 0xf7c00000-0xf7cfffff]
[ 0.428384] pci_bus 0000:06: resource 8 [io 0x0000-0x0cf7]
[ 0.428385] pci_bus 0000:06: resource 9 [io 0x0d00-0xffff]
[ 0.428386] pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.428387] pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.428388] pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.428390] pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.428391] pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.428392] pci_bus 0000:06: resource 15 [mem 0xdfa00000-0xfeafffff]
[ 0.428407] NET: Registered protocol family 2
[ 0.428547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.428723] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.428830] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.428843] TCP: reno registered
[ 0.428856] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.428900] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.428957] NET: Registered protocol family 1
[ 0.428966] pci 0000:00:02.0: Boot video device
[ 0.461852] PCI: CLS 64 bytes, default 64
[ 0.461882] Unpacking initramfs...
[ 0.516863] Freeing initrd memory: 4432K (ffff88007fbac000 - ffff880080000000)
[ 0.516867] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.516869] software IO TLB [mem 0xba390000-0xbe390000] (64MB) mapped at [ffff8800ba390000-ffff8800be38ffff]
[ 0.517040] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.517065] Scanning for low memory corruption every 60 seconds
[ 0.517227] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.525884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.526849] zbud: loaded
[ 0.526961] VFS: Disk quotas dquot_6.5.2
[ 0.526984] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.527055] msgmni has been set to 31015
[ 0.527086] Key type big_key registered
[ 0.527196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.527224] io scheduler noop registered
[ 0.527225] io scheduler deadline registered
[ 0.527244] io scheduler cfq registered (default)
[ 0.527371] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.527582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.527592] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.527614] efifb: probing for efifb
[ 0.527815] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 1876k, total 1875k
[ 0.527816] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.527816] efifb: scrolling: redraw
[ 0.527817] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.528821] Console: switching to colour frame buffer device 100x37
[ 0.529808] fb0: EFI VGA frame buffer device
[ 0.529813] intel_idle: MWAIT substates: 0x1120
[ 0.529814] intel_idle: v0.4 model 0x2A
[ 0.529815] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.529932] GHES: HEST is not enabled!
[ 0.529969] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.530312] LinSolved.
Please integrate with the forum post below.
Blacklisting the uas module allowed me to see the vendor and product id, and follow the directions given by Da_Coynul. Before rebooting, I removed the initial file that globally blacklisted the uas module.
See: https://bbs.archlinux.org/viewtopic.php?id=183190
Thanks to Da_Coynul! -
[SOLVED] Kernel panic when using external USB hard drive
I have a desktop PC with a 64 bit arch install, on a Core2 Duo 6320 CPU. I have been using (and continue using right now) a 500 GB "Iomega Desktop Hard Drive" external USB hard disk without problems. But I have just bought a 3 TB "Seagate Expansion" external USB hard drive and I'm unable to use it from my Arch install. Each time I try to format it or to copy data from the PC, Arch freezes with a kernel panic. Sometimes it freezes faster and I cannot see anything, but others I am able to see the following kernel messages, repeating several times:
[11701.205071] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13380 tag 29, inflight: CMD
[11701.221297] sd 3:0:0:0: [sdf] abort completed
[11701.221313] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.221323] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13500 tag 30, inflight: CMD
[11701.237550] sd 3:0:0:0: [sdf] abort completed
[11701.237567] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.237576] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13680 tag 31, inflight: CMD
[11701.253922] sd 3:0:0:0: [sdf] abort completed
[11701.253936] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.253956] sd 3:0:0:0: uas_eh_device_reset_handler
[11704.252182] scsi host3: uas_eh_task_mgmt: LOGICAL UNIT RESET timed out
[11704.252196] scsi host3: uas_eh_bus_reset_handler start
[11704.252443] usb 5-6: stat urb: killed, stream 0
[11704.358882] usb 5-6: reset high-speed USB device number 3 using ehci-pci
[11704.483206] scsi host3: uas_eh_bus_reset_handler success
Strange enough, the drive is listed by lsusb command as a 2TB but I don't think this is related to the problem (as the OS sees the 3 TB). This is the lsusb output:
Bus 001 Device 003: ID 0bc2:3312 Seagate RSS LLC SRD00F2 [Expansion Desktop Drive 2TB]
I have tried the drive on other PCs and it works flawlessly. Also tried booting Windows 8 on the same PC I have Arch installed in, and in Windows it also works perfect. I have tried using ext2 and NTFS filesystems. Tried also changing the USB cable without success. And right now I'm out of ideas. Any suggestions?
Last edited by doragasu (2014-07-03 11:06:25)looks like it could be the UAS module , check https://bbs.archlinux.org/viewtopic.php?id=183190
-
[SOLVED] Kernel panic on poweroff/reboot only in X
Hi guys,
Another day, another noob. I've been enjoying my arch experience so far and looking forward to continuing the journey! I've hit a small roadblock along the way however, I seem to get a kernel panic (system hang/caps lock blinking) upon trying to poweroff/reboot in the terminal. This seems to be since I updated linux from 3.19.2-1 > 3.19.3-1. Interestingly enough the hangs only occur when trying to poweroff/shutdown from X. I have no issue with either command at the initial tty console.
*Possibly related - during the upgrade I got 2 warnings - Possibly missing firmware for module: aic94xx and Possibly missing firmware for module: wd719xx
I went hunting for log files but wasn't 100% sure what I was looking for tbh.
Any help would be greatly appreciated.
Cap
Last edited by CapricornOne (2015-04-07 22:18:36)mauritiusdadd wrote:
smirky wrote:Something like that. I guess he means that it's been acknowledged, discussed and probably someone made a patch for it. It's a matter of time for 3.19.4 to pop out and therefore be built in Arch [core].
Exactly: quoting the person who closed the original bug report
This is fixed upstream, and the relevant commit is cc: stable, i.e. should find its way to some v3.19.y. Closing, thanks for the report.
-- edit: the patch has been added in the package linux 3.19.3-3, the speed of Archlinux developers is awesome (and this should go also in the 'ooh, nice!' thread).
Issue still occurring. No change with 3-3. It's a strange one. -
I came home and had a kernel panic. Only thing that i could understand was xfce4taskman and rtl819 which is my wireless card. is there a way to determine the cause and solve it so it doesn't happen again. or is my wifi card dying or something? addittional info qbittorrent was running at the time. had a few before when it was running before. downgraded kernel and upgraded again before and all seemed well. maybe it's a qbittorrent bug?
Last edited by mamamia88 (2012-12-18 02:50:58)WonderWoofy wrote:Yeah, that last part of my last post I realized is filled with irony... lets hope you continue to stay shit outta luck.
well i tried transmission to download same files and no kernel panic. i think it might have something to do with the client since it's happened 3 times before all with the same client running. and it does mention my wifi card. maybe the torrents are overwhelming my wifi card? this is just guesswork though.
Last edited by mamamia88 (2012-12-18 17:45:41) -
[SOLVED] kernel panic on shutdown
Hi all,
I'm experiencing kernel panics when shutting down. My system is up to date.
No issues with boot.
I don't know what to look for or to check. I tried to boot with fallback image but shutdown gives the same messages.
after printing "power off" (until there everything is fine) it prints something like a stack backtrace...messages not understandable by me. Are they logged anywhere?
the last one is:
/etc/rc.shutdown:line 100: 1761 killed /sbin/poweroff -d -f -h -i
What can I do?
Hope you'll give some feedback
Last edited by virusso80 (2011-07-22 17:30:25)As Stebalien posted correction:
edit: /etc/rc.local.shutdown
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
run as root
nano /etc/rc.local.shutdown
add line
modprobe -r vboxdrv
You could also test if problem is caused with module vboxdrv, by simply running as root command mentioned above and see if your problem persist during shutdown. To check if you have vboxdrv running use this
lsmod | grep vboxdrv
Then, by editing /etc/rc.local.shutdown you make it permanent.
S-
This solved problem with hibernation (post 7):
https://bbs.archlinux.org/viewtopic.php?id=122957
Last edited by StenM (2011-07-23 09:43:10) -
[SOLVED] Kernel Panic - caps lock and scroll lock flashing
So I just spent a whole bunch of $$$ on a new desktop, and a couple of hours putting it all together, now I can't get anything except kernel panics when booting the Arch install CD
Hardware:
Core 2 Quad Q8400
Gigabyte EP43-UD3L
8gb RAM
2 x Seagate SATA 160gb
2 x Seagate SATA 1tb
So far I've tried:
- Arch ISO 2008.06 and 2009.02
- Fail Safe Defaults in the BIOS
- 'noapic' boot option
- HPET in 32 and 64 bit mode
The strange thing is that the panic comes at various stages - sometimes before the init scripts start, sometimes after, and also during boot it complains about errors with fd0 - except there is no floppy drive.
Any ideas folks?
Last edited by fukawi2 (2009-10-20 10:24:54)Urgh, appears to be bad RAM... Running memtest and switching sticks in and out only shows errors with one particular RAM stick installed. I'll leave this stick out and try installing Arch again once the current memtest pass is finished.
I'd have expected better from Patriot!
Last edited by fukawi2 (2009-10-20 04:50:34)
Maybe you are looking for
-
Verity Spider is licensed to only spider a local server. Because of this, it indexes my collection with http://localhost/ instead of http://www.mydomain.com/ My problem is that none of my users outside the network can access search results because al
-
Is LiveCache Mandatory even for a demo system
Hi, I am in the process of setting up a demo of SCM. ICH (working ok) and Demand planning. We have not installed LiveCache (SCM 41 and we don't have any 64 bit servers available). When I replicate my transactional data from R/3 I get a SQL eror -709
-
I rented a film last night and when visitors came I paused it, I can't get back into it now. When I try to I am told I have already rented it and to go to "downloads" in settings. There is no "downloads " in settings. I then read some similar complai
-
I want to buy lightroom 5 as standalone product. I do not want creative cloud. How can I make this possible?
-
I have recently upgraded and cannot really export any thing in any format the status of an export is waiting by default and when i start the queue this is the status msg - Source File: E:\Temp\shugal unlim.prproj - Output File: E:\Documents and Setti