[Solved]kernel26-2.6.34.2-1 upgrade fails

Proceed with installation? [Y/n] y
:: Retrieving packages from core...
kernel26-2.6.34.2-... 22.2M 62.2K/s 00:06:05 [----------------------] 100%
kernel26-docs-2.6.... 5.3M 53.9K/s 00:01:42 [----------------------] 100%
kernel26-headers-2... 3.7M 59.8K/s 00:01:04 [----------------------] 100%
kernel26-manpages-... 2020.0K 59.9K/s 00:00:34 [----------------------] 100%
:: Retrieving packages from extra...
nvidia-utils-256.4... 14.1M 52.1K/s 00:04:37 [----------------------] 100%
nvidia-256.44-1-i686 2.1M 77.9K/s 00:00:28 [----------------------] 100%
checking package integrity...
(6/6) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
kernel26: /lib/modules/2.6.34-ARCH/modules.devname exists in filesystem
kernel26: /lib/modules/2.6.34-ARCH/modules.softdep exists in filesystem
Errors occurred, no packages were upgraded.
is it safe to use -f switch.
thanks
Note: thanks pressh. As I did not subscribe to dev public, I am not aware of the solution also not in the home page. The cobalt theme prevent me to switch to home from the forum page .
Last edited by kgas (2010-08-03 15:24:20)

O_O
Hmm, waiting a week or so before doing an update does not seem like a bad idea...
:: Synchronizing package databases...
testing is up to date
archlinuxfr is up to date
catalyst is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
error: failed to prepare transaction (could not satisfy dependencies)
:: Starting full system upgrade...
:: tiacx: requires kernel26<2.6.35
Oh. tiacx...not needed. /no more error.
Last edited by Skyalmian (2010-08-04 00:57:56)

Similar Messages

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713)

Pacman seg fault(Solved but with comments on pacman-db-upgrade)

Performed an install from FTP and booted into root login.
Performed pacman -Syu and received report system up to date.
Performed downloads via pacman of twelve packages including xorg and xfce4.
Performed download of abs package.
Downloaded abs repos.
Modified abs extra vlc package and performed pacman -U install of modified package.
Pacman working well at this point.
Rebooted.
After reaching xfce4 Desktop, attemptd to install firefox.
Pacman -S firefox produced..... /usr/bin/pacman/ report(forget the exact error)
Subsequent trials with ...pacman -U .... produces seg fault.
Cannot use pacman. All other programs seem to perform correctly. Perhaps have lost DNS.
Cannot perform ...pacman -Syu --debug.....segfaults.
Last edited by lilsirecho (2011-07-19 18:19:49)

Solved the difficulty but have no idea what can be done to prevent it from occuring for another user.
It seems that the db did not get upgraded when the ...pacman-db-upgrade ...command was executed. There was no statement for ..."pre 3.5 db" upgrade....while executing the command.
After re-install, the upgrade command performed correctly and pacman now performs correctly after reboots.
The question comes up as to what to do if the upgrade command does not work correctly and whether some indicator of correct response should appear in the beginners guide. Additionally, what can be done in the event that the upgrade command fails to meet the correct response.
These questions will in time be resolved by a new .iso but the present exposure is amazing in its consequences!
Perhaps the upgrade command is also a function of properly synced mirrors but the command requesting the upgrade was ...pacman -Syy... the mirror sync function!
What do we have...catch22?
The resultant segfaults make sense if the pacman sync db is not upgraded.
How is a user to know the upgrade failed? What to do about such a condition?
Marking this thread as solved ...with comments...

HT4623 My iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

[solved] Upgrade fails

Commanding 'pacman -Syu' says the following packages will be upgraded,
acpid-2.0.14-2 ati-dri-8.0.1-2 bash-4.2.024-1 blueman-1.23-3 bluez-4.99-1 boost-libs-1.49.0-1
dnsutils-9.9.0-1 e2fsprogs-1.42.1-1 ekiga-3.3.2-3 firefox-11.0-2 flashplugin-11.1.102.63-1
freetype2-2.4.9-1 gcc-4.6.3-1 gcc-libs-4.6.3-1 git-1.7.9.4-1 glproto-1.4.15-1 gmime-2.6.7-1
grep-2.11-2 gstreamer0.10-0.10.36-1 gstreamer0.10-bad-0.10.23-1
gstreamer0.10-bad-plugins-0.10.23-1 gstreamer0.10-base-0.10.36-1
gstreamer0.10-base-plugins-0.10.36-1 gstreamer0.10-good-0.10.31-1
gstreamer0.10-good-plugins-0.10.31-1 gstreamer0.10-ugly-0.10.19-1
gstreamer0.10-ugly-plugins-0.10.19-1 imagemagick-6.7.6.0-1 inputproto-2.2-1 intel-dri-8.0.1-2
kmod-6-1 krb5-1.10.1-1 lame-3.99.5-1 libcroco-0.6.4-1 libdmx-1.1.2-1 libedit-20120311_3.0-1
libgl-8.0.1-2 libglapi-8.0.1-2 libgphoto2-2.4.13-1 libltdl-2.4.2-4 libmpdclient-2.7-1
libmtp-1.1.2-1 libpciaccess-0.13-1 libpst-0.6.54-1 libsocialweb-0.25.20-0 libtiff-4.0.1-1
libtool-2.4.2-4 libwbclient-3.6.3-4 libx11-1.4.99.901-1 libxau-1.0.7-1 libxcb-1.8.1-1
libxcursor-1.1.13-1 libxdmcp-1.1.1-1 libxext-1.3.1-1 libxft-2.3.0-2 libxi-1.6.0-1
libxinerama-1.1.2-1 libxkbfile-1.0.8-1 libxmu-1.1.1-1 libxpm-3.5.10-1 libxrender-0.9.7-1
libxres-1.0.6-1 libxss-1.2.2-1 libxt-1.1.3-1 libxtst-1.2.1-1 libxv-1.0.7-1 libxvmc-1.0.7-1
libxxf86dga-1.1.3-1 libxxf86vm-1.1.2-1 linux-3.2.11-1 lirc-utils-1:0.9.0-12 lm_sensors-3.3.2-1
lua-5.1.5-1 man-pages-3.37-1 mesa-8.0.1-2 mkinitcpio-0.8.4-1 mkinitcpio-busybox-1.19.4-2
mpc-0.22-1 mpfr-3.1.0.p7-1 mtdev-1.1.2-1 mx-1.4.3-1 net-snmp-5.7.1-2 networkmanager-0.9.2.0-3
openssl-1.0.0.h-1 poppler-0.18.4-1 poppler-glib-0.18.4-1 powertop-1.13-3 ppl-0.12-1 qt-4.8.0-6
sane-1.0.22-7 smbclient-3.6.3-4 subversion-1.7.4-1 sudo-1.8.4.p4-1 svga-dri-8.0.1-2
tzdata-2012b-1 udev-181-4 usbutils-005-1 util-linux-2.21-5 xcb-proto-1.7-2
xf86-input-acecad-1.5.0-3 xf86-input-aiptek-1.4.1-3 xf86-input-evdev-2.7.0-1
xf86-input-joystick-1.6.1-1 xf86-input-keyboard-1.6.1-2 xf86-input-mouse-1.7.2-1
xf86-input-synaptics-1.5.99.901-2 xf86-input-vmmouse-12.8.0-1 xf86-input-void-1.4.0-3
xf86-video-apm-1.2.3-5 xf86-video-ark-0.7.4-1 xf86-video-ast-0.93.9-2 xf86-video-ati-6.14.3-2
xf86-video-chips-1.2.4-4 xf86-video-cirrus-1.3.2-8 xf86-video-dummy-0.3.5-1
xf86-video-fbdev-0.4.2-6 xf86-video-glint-1.2.7-1 xf86-video-i128-1.3.4-5
xf86-video-i740-1.3.2-8 xf86-video-intel-2.18.0-1 xf86-video-neomagic-1.2.5-6
xf86-video-nv-2.1.18-5 xf86-video-rendition-4.2.4-6 xf86-video-s3-0.6.3-7
xf86-video-s3virge-1.10.4-7 xf86-video-siliconmotion-1.7.5-4 xf86-video-sisusb-0.9.4-6
xf86-video-trident-1.3.4-6 xf86-video-tseng-1.2.4-6 xf86-video-v4l-0.2.0-10
xf86-video-vesa-2.3.0-8 xf86-video-vmware-12.0.1-1 xf86-video-voodoo-1.2.4-6
xf86-video-xgixp-1.8.0-5 xmms2-0.8DrO_o-5 xorg-fonts-encodings-1.0.4-3 xorg-server-1.12.0-1
xorg-server-common-1.12.0-1 xorg-xinput-1.5.99.1-1 xproto-7.0.23-1
The upgrade fails, however, with an error 'damaged package' or something (I have it in finnish). The file '/var/log/pacman.log'
does not give any info. I have no idea how to proceed.
EDIT: Thanks guys. I did
pacman -Sc
which fixed the problem. I should've known that from the start, but then again this was the first time I've had problems with upgrades.
Last edited by habbe (2012-03-17 10:44:03)

Could you please run it as:
LC_ALL=C pacman -Syu
That will cause the message to be created in English. Then, go ahead and post the full error message. Thanks.

[SOLVED]Full upgrade fails after new install

Hello,
Please note before reading that I know about the recent changes with the /lib symlink to /usr/lib and the filesystem (I read the home page).
After a fresh install, I try to upgrade the system :
pacman -Syy && pacman -Syu : it asks for pacman update, I say yes.
pacman -S pacman : fails because of glibc
pacman -S pacman --ignore glibc : fails, won't upgrade because glibc it's a dependency of pacman
pacman -Syu : say no to pacman upgrade, fails because of glibc and filesystem
pacman -Syu --ignore glibc --ignore fliesystem : upgrade almost nothing because most of the packages (~400M) need glibc
I can't upgrade anything at the end...
Thanks for any help
Last edited by John0000 (2012-07-19 14:52:17)

If either of this steps does not work (e.g. due to dependency version issues, file conflicts in /lib), refer to this G U I D E for more detailed instructions on performing this upgrade.
Did you read this guide?
There is thread about it also: https://bbs.archlinux.org/viewtopic.php?id=144620
And Allan wrote a blog entry about upgrading from core installation: http://allanmcrae.com/2012/07/updating- … e-install/
BTW as Pres suggested go with the net-install, core installation was always kind of a fallback for me and I had to do this just once because of network troubles. It just doesn't make much sense to do core installation if there is no holdback because with first pacman -Syu you'll end up downloading the same amount of data as if you would do a clean net-install, and it's faster and you probably won't get conflicts accumulated from year or so.
Last edited by masteryod (2012-07-19 14:38:38)

Help needed: iPhone 4 software upgrade failed many times

Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

ITunes upgrade fails due to QuickTime

I tried to upgrade my iTunes to version 9.3.xx. Unfortunately the upgrade failed. The application since then is not opened and the following error message appeared.
“Error writing the file c:\Program Files\Quick Time\QTTask.exe
Verify that you have access to that directory”
I followed all the support suggestions uninstalling all the Apple applications and re-installed them back but with no luck. The above message appears every time iTune is trying to install QuickTime and as iTunes needs QuickTime the whole upgrade fails.
Any suggestion how I can solve this issue?
BR// Markos

“Error writing the file c:\Program Files\Quick Time\QTTask.exe ... Verify that you have access to that directory”
That's consistent with disk/file damage, Markos.
Let's first try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
Does the chkdsk find/repair any damage? If so, are you able to successfully reinstall QuickTime afterwards?

Mail upgrade fails on import

Hi
When upgrading to Yosemite, the Mail app has gone into an endless loop of importing.
It tries to import, then reports that it has failed.
You then get a message about the Mail Index has been damaged and so you have to quit Mail.
It then starts the process all over again.
I have around 31K messages. But Mail is COMPLETELY unusable. Cant open/view/read/send/search/play with emails.
Very disappointing...
Here are some interesting entries from the system log:
20/10/2014 10:49:34.239 Mail[3459]: resolvedBaseMailDirectory /Users/amorton/Library/Mail
20/10/2014 10:49:48.805 Mail[3459]: Capturing diagnostics to trace took 14.565747
20/10/2014 10:51:07.133 Mail[3459]: open on /Users/amorton/Library/Mail/V2-Temp.noindex/[email protected]/Personal.mbox/Info.plist: No such file or directory
20/10/2014 10:51:22.518 Mail[3459]: Exception during migration: data parameter is nil
20/10/2014 10:51:22.518 Mail[3459]: Migration (simple) failed and took 108.279527 seconds
20/10/2014 10:51:27.228 Mail[3459]: emlxCountPreMigration 61078
20/10/2014 10:51:27.228 Mail[3459]: emlxCountPostMigration 61078
20/10/2014 10:51:27.229 Mail[3459]: lostAndFoundEmlxCount 0
20/10/2014 10:51:27.229 Mail[3459]: messageCountPreMigration 31712
20/10/2014 10:51:27.229 Mail[3459]: messageCountPostMigration 31712
20/10/2014 10:51:27.230 Mail[3459]: MessageTracing took 4.710642
20/10/2014 10:51:27.230 Mail[3459]: Upgrade failed because of exception: data parameter is nil
20/10/2014 10:51:27.231 Mail[3459]: Library upgrader failed: Error Domain=MCMailErrorDomain Code=1029 "data parameter is nil" UserInfo=0x7fac01622a90 {NSLocalizedDescription=data parameter is nil}
The thing is - that file does exist (the Info.plist reported at 10:51)
Any ideas, or are we destined to wait for the upgrade patch!?
Andrew

For what it's worth, I solved my problem. I went into the preferences for iCloud and unchecked mail and then rechecked it. Mail then started up just fine. However, my old messages for a couple pop accounts were not there (icloud and google mail were fine). So then I tried to import, but in the dialogue box, it didn't show the mail folder or even the library folder (which is normally hidden). So in finder, using the option + go menu I navigated to the libary folder and made an alias for the missing pop account's mail and put that on the desktop. Then I went back to mail and selected the alias for the missing pop account mail. It had no problem importing then, although it did take a while. Then when I selected import again, for some reason it went right to the correct mail folder within the library folder and I didn't have to make an alias for the other account. The mail all came in then under the imported category. For me that's actually ok. I had one piece of mail I really needed to find, and the search found it right away. So at least for now, all is well.

Exchange Server 2013 CU7 Upgrade Failed

I am trying to upgrade Exchange Server 2013 SP1 to CU7 but after complete 46% of Mailbox Role Transport Service the Upgrade Failed and automatically rebooted the server. After restart its showing memory dump. How can we solved it.

Hi livesayed,
According to your description, we cannot get the key of this question.
Would you please help to collect related event log or setup log? It’s more helpful for further troubleshooting.
Besides, I find an similar thread about Exchange 2013 CU2 upgrade to CU3 Failed at Front End Transport Service, for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/32e06b5b-76bb-45d0-bf99-0b83c3182199/exchange-2013-cu2-upgrade-to-cu3-failed-at-front-end-transport-service?forum=exchangesvrdeploy
Best Regards,
Allen Wang

Firmware upgrade fails

I am having trouble upgrading the firmware on my WRE54G. My hardware is v.3 and the existing firmware is 3.01.01.
I downloaded the latest firmware and extracted the .img file. I went to the admin page of the expander, pointed it towards the new firmware, and hit "go." After a minute or so it said something like:
Firmware upgrade fail.
Fail!
No reasons are given.
Anybody have any idea what is going on?
Thanks,
Garth

I had a similar problem upgrading firmware with my WRT300N. What i did to solve the problem was first i downloaded and went through the winzip program given for the router, then i went back to the webpage of the router and retried the upgrade and it worked. I actually ignored by routers version, and downloaded and went through each winzip program and each firmware upgrade for every different version . **i only downloaded the firmware up to my version and my version**.
Message Edited by DaveY on 11-15-2007 07:01 PM

Muse upgrade fails to install

MUSE upgrade fails to install. I'm a Creative Cloud subscriber and have successfully installed all available apps. It's not me or my system. The problem is with the upgrade.

Same problems. Update failed and after uninstall of Muse trying to reinstall is also unsuccesful.
Two months ago I also had problems with Muse, The workaround i used then doesn't help me now.
Perhaps Adobe has version problems with Muse and Air that also had a recent (3.4) update.
Or a problem with the new flash version and Muse.
Anyway, the reason I signed up for Creative cloud i.e. Muse doesn't seem to be a good choice since Muse sucks now it's in the production.
with the Beta had I no problems at all.
Windows event viewer (Win XP) describes the problem after the failed update as well as after the failed reinstall as:
'Faulting application adobe muse.exe, version 0.0.0.0, faulting module fontsfre.dll, version 0.0.0.0, fault address 0x00010b78.'
Best,
Ysbrand van der Veen
P.S. To see how the Muse uninstall problem relates (that's what it in essence is) to the other apps in Creative Cloud, I unstalled all the other Creative Cloud apps I had installed.
Uninstalling them changed the Status in AAW (adobe app mgr) from <installed> to <install> like it should be with only one exeption that is Adobe Muse.
Even manually deleting the prefetch files for Muse and all other remains of Muse I could find with Windows search on my c: drive didn't help me out.
Uninstalling Air (though needed by other apps) didn't solve the problem as well of Muse having the in this case hateful status of installed although uninstalled.

Zen Micro 5GB Firmware "Upgrade Faile

Zen MicroFirmware: 2..02?Have just bought it from america, have tried installing both firmwares from the site, and both of them say "Upgrade Failed!" I havent installed any of the software from the disc except the Zen Micro driver, my pc didnt need this but i thought it would be best to. Also i can only add tracks to it through WMP 0, i cant drap and drop in windows explorer, why is this? On my old creative muvo n200 i could do this fine!?Some help please. Do i need to erase the firware in the recovery menu? I am just running the downloaded applications when my player has the docked icon on the screen.
Message Edited by ajay6 on 03-5-200607:28 PM

Thanks for help.
Major problem solved.
Already upgraded to new firmware.
I do it by:
1. uninstall all creative application and plugin.
2. using registry cleaner to clean the registry.
3. downgrade WMP to WMP0
4. Detected by WMP as MTP device, loading firmware upgrade, closed WMP. upgraded.
Now it Working fine already, just still have some problem is:
. Only WMP can detect it, all creative application can't detect it..
thanks anyway.

[Solved]kernel26-2.6.34.2-1 upgrade fails

Similar Messages

Maybe you are looking for