[solved] keycodes with more than 8bits

Hey,
I got a Logitech Presenter and I try to get it work. The 'page up/down' buttons are correctly mapped but the other two buttons don't seem to work.
I seek out the following information:
- pressing the buttons doesn't generate a key event in gnome (I used 'xev' )
- pressing the buttons generates key events in tty with key codes 425 and 431 (I used showkey)
- executing 'xmodmap -pke' in gnome shows a list of all keycodes up to 255 - it seems that only 8 bit keycodes are handled
What can I do to get keycode 425 in gnome?
I use gnome 3.10.1 with linux 3.12.5.
Thanks for your help.
Samuel
Last edited by smohr (2014-01-14 23:19:50)

I have solved my problem with a workaround.
I map all the five scancodes to keycodes less than 255:
# Logitech Presenter R400
keyboard:usb:v046DpC52Dd*dc*dsc*dp*ic*isc*ip*in00*
KEYBOARD_KEY_070029=wimax
KEYBOARD_KEY_07003e=rfkill
KEYBOARD_KEY_070037=display_off
KEYBOARD_KEY_07004b=video_prev
KEYBOARD_KEY_07004e=video_next
Unfortunately, I did not get how to use keycodes instead of definitions there.
These keycodes are mapped with Xmodmap:
keycode 250 = Prior NoSymbol Prior NoSymbol Prior
keycode 249 = Next NoSymbol Next NoSymbol Next
keycode 254 = F5 F5 F5 F5 F5
keycode 255 = Escape NoSymbol Escape NoSymbol Escape
keycode 253 = period colon period greater U2026

Similar Messages

Report with more than 500 rows

I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
Thanks a lot
Sudha

Hi All,
The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
Thats solve ur problem i think.....
Thanks n Regards,
ROSY

Sync with more than one computer

Is it possible to sync with more than one computer using the same Blackberry Curve 8310? I have a work pc and a laptop and I am using MS Outlook. I've tried syncing to both but the appointments all duplicate themselves. Is there a way to set it up so I can sync to both.
Les

Hello Keithj,
Welcome to the BlackBerry Support Community Forums
You can synchronize with multiple computers but there are a few considerations to take into account when doing so.
Check out the following KB article for more information:
http://www.blackberry.com/btsc/KB18693
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Word Mail Merge does not accurately import a Text field in Excel with more than 15 numbers

Hi, I've looked through some of the discussions regarding importing numbers from excel into word mail merge. I'm having a problem. In Excel I have a column that includes numbers with more than 15 digits. In Excel, I have made this column a text format, so
now in Excel those long numbers show up correctly. However, when doing a mail merge in Word, again the numbers past 14 digits change to zeros. I've read many help articles about this but am still not finding a solution. I even tried going the DDE route and
that didn't do it either. I checked out this answer: http://www.techsupportforum.com/forums/f57/mail-merge-data-corruption-429351.html which was the most helpful, but again, DDE seemed to work for this person but not for me. I hope someone can offer a solution.
I was hoping that I could do a picture switch, but that does not seem to be an option for this particular problem. I don't know why importing it in DDE format did not solve the problem. Thanks for any help!

Wow! After all my searching and just after posting this I figured out the solution! I originally had { MERGEFIELD Field_Name \# # } But then I just removed everything after the field name, as is normal for any other text field, so not indicating it was
a number, and now it shows up correctly even if the number (from a Text formatted field in Excel) is longer than 15 digits. Hope this helps anyone else who has a problem. I did not use DDE to solve this problem.

Spool request with more than 255 columns

Hi,
Please let me know what formatting type has to be used to have spool output with more than 255 lines.
X_24_80_JP        L      ANY           00024   00080   ABAP list HR Japan: At least 24 rows by 80 columns
X_44_120          L      ANY           00044   00120   ABAP/4 list: At least 44 rows by 120 columns
X_51_140_JP       L      ANY           00051   00140   ABAP list HR Japan: At least 51 rows by 140 columns
X_58_170          L      ANY           00058   00170   ABAP/4 list: At least 58 rows by 170 columns
X_60_80_JP        L      ANY           00060   00080   ABAP list HR Japan: At least 60 rows by 80 columns
X_65_1024/4       L      ANY           00065   01024   ABAP List: At Least 65 Lines 4*256=1024 Columns Four-Sided (Only for SAPlpd)
X_65_132          L      ANY           00065   00132   ABAP list: At least 65 rows by 132 columns
X_65_132-2        L      ANY           00065   00132   ABAP List: 2-column 65 characters 132 columns (only for SAPLPD from 4.15)
X_65_200          L      ANY           00065   00200   ABAP list: at least 65 lines with 200 columns (not for all device types)
X_65_255          L      ANY           00065   00255   ABAP/4 list: At least 65 rows with a maximum number of columns
X_65_256/2        L      ANY           00065   00256   ABAP list: At least 65 lines 2*128=256 double columns (SAPLPD only)
X_65_512/2        L      ANY           00065   00512   ABAP List: At least 65 Lines 2*256=512 Columns 2-sided (Only for SAPlpd)
X_65_80           L      ANY           00065   00080   ABAP/4 list: At least 65 rows by 80 columns
X_65_80-2         L      ANY           00065   00080   ABAP List: 2-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_65_80-4         L      ANY           00065   00080   ABAP List: 4-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_90_120          L      ANY           00090   00120   ABAP list: At least 90 rows by 120 columns
X_PAPER           L      ANY           00010   00010   ABAP/4 list: Default list formatting
X_PAPER_NT        L      ANY           00001   00001   ABAP/4 list: Obsolete (do not use)
X_POSTSCRIPT      L      ANY           00001   00001   Pre-prepared PostScript
X_SPOOLERR        L      ANY           00001   00001   ABAP list: Spooler problem report
X_TELEX           L      TELEX         00001   00001   Telex: 69 characters wide, only as many lines as supported by TTU
ZABC_SAP        L      ANY           00065   00550   LCM Report Page Type
I have created a custom Format Type with 65*550 (ZABC_SAP) , but still the output gets truncated in the spool.
In sp01 . For the spool request ... If it displayed in Graphical layoout ... Output is getting truncated but when we see in Raw format .. i can see the entire output. But it is not at all formatted.
Thanks,
Tanuj
Message was edited by:
        Tanuj Kumar Bolisetty

Hello Tanuj,
You need to use a page format greater than 255 columns for sure. However still if it does not solve the issue then you may consider using the note 186603.
PS: I guess you are on a higher release than 4.6 C . For this release this note íIt has a text attachment for a report tat allows to display such spool requests.
Regards.
Ruchit.

Not able to create a table with more than 64 fields in dictionary

Hi,
I have created a java dictionary in Netweaver Developer studio. I have to create a table with more than 64 fields in it. I was able to create the table in dictionary, but when i tried to build it, I am getting an error message as "more than 64 fields are not allowed". If i create the table with 64 fields or below 64 fields, i can build the dictionary and deploy it.
That is, when i create a table with more than 64 fieds, I am not able to compile the dictionary, But if i reduce the fields to 64 or below, i can compile the dictionary.
Kindly help me to solve the problem.
Regards,
Sudheesh

Hi,
Sudheesh,as far as I am aware creating of fields in the table actually depends on the total width of table that can be used for various Vendors.
So I actually tried out creating a table with too many fields,and I am reproducing the errors which I have obtained -
Error Dictionary Generation: DB2:checkWidth TMP_1: total width of table (198198 bytes) greater than allowed maximum (32696 bytes) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB4:Table TMP_1: fixed length: 198366 (32767). TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB6:checkWidth TMP_1: total width of table (297200) including row overhead is greater than the allowed maximum for 16K tablespaces . TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: MSSQL:checkWidth TMP_1: total width(198215) greater than allowed maximum (8060) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: SAPDB:checkWidth TMP_1: total width(198297) greater than allowed maximum (8088) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: Table TMP_1 is not generated TMP_1.dtdbtable TestDictionary/src/packages 
I hope you can understand what the errors state.I am trying to create a table whose total width(sum of width all columns) is greater than the maximum allowed for various Vendors,such as DB2,MSSQL,SAPDB etc.
I hope this answer helps you create your table suitably
Regards,
Harish
(Please award points if this answer has been usefull)

Analyse a partitioned table with more than 50 million rows

Hi,
I have a partitioned table with more than 50 million rows. The last analyse is on 1/25/2007. Do I need to analyse him? (query runs on this table is very slow).
If I need to analyse him, what is the best way? Use DBMS_STATS and schedule a job?
Thanks

A partitioned table has global statistics as well as partition (and subpartition if the table is subpartitioned) statistics. My guess is that you mean to say that the last time that global statistics were gathered was in 2007. Is that guess accurate? Are the partition-level statistics more recent?
Do any of your queries actually use global statistics? Or would you expect that every query involving this table would specify one or more values for the partitioning key and thus force partition pruning to take place? If all your queries are doing partition pruning, global statistics are irrelevant, so it doesn't matter how old and out of date they are.
Are you seeing any performance problems that are potentially attributable to stale statistics on this table? If you're not seeing any performance problems, leaving the statistics well enough alone may be the most prudent course of action. Gathering statistics would only have the potential to change query plans. And since the cost of a query plan regressing is orders of magnitude greater than the benefit of a different query performing faster (at least for most queries in most systems), the balance of risks would argue for leaving the stats alone if there is no problem you're trying to solve.
If your system does actually use global statistics and there are performance problems that you believe are potentially attributable to stale global statistics and your partition level statistics are accurate, you can gather just global statistics on the table probably with a reasonably small sample size. Make sure, though, that you back up your existing statistics just in case a query plan goes south. Ideally, you'd also have a test environment with identical (or nearly identical) data volumes that you could use to verify that gathering statistics doesn't cause any problems.
Justin

DIAdem report with more than 3 signals

Hi everybody!
How can I create a report with more than 3 signals as input. The DIAdem report accepts only 3 signals as Input.
In my opinion this is an very easy question but I could not solve it during a few hours!
Thanks in advance,
Manuel123

Thank you for your answer!
But I have still some problems.
According to your help I have connected eight of the signal-boxes to the connector. After that it is possible to connect up to eight signals to this sub-vi. Great!
But now I want show all these signals in the Diadem report, for this reason I created a new report-layout (see attachment) and wired the path of it to the "report layout file" - input. Unfortunately Diadem uses still a layout with just two signals and even if I open my own layout in Diadem there are only two data-lines listed in the "Data Portal: Internal Data" - panel.
Where is my failure?
Regards,
Manuel123
Message Edited by Manuel123 on 08-29-2007 10:00 AM
Message Edited by Manuel123 on 08-29-2007 10:01 AM
Attachments:
man.TDR.zip ‏11 KB

Read CAN Data message With more Than 64 bits

Dear All,
I'm working With CAN card PCI Series 2 with Labview 8.2.1 and Measurement and automation 5.1.
I'm making measures from an ECU.
This one (please see piture) is composed with more than 64 bits for one ID.
I don't found how I can read those Data using "Channel API". Is It possible ?
On MAX I am not able to creat CAN Task measure with more Than 64 bits...
It is necessary to use only "Frame API".
Thanks for repply.
Regards
Solved!
Go to Solution.
Attachments:
Transmition_Data _ECU_ A_50Hz.JPG ‏80 KB

NI-CAN Channel API is not able to deal with Multi frame messages, so you would need to use the NI-CAN Frame API to read the Multi frame message and do the conversion into physical values on your own.

Create activity with more than partner and send email to all of them

Hello All,
I am working on CRM 5.0 activity management I want to create activity with more than activity partner and send email to all of them
Regards
Khaled Fahim

hi
you can achieve this easily by creating a partner determination procedure in which you will be having more than one partner function having the function category as activity partner.
once you created the PDP just attach this to the transaction and then call the procedure when you are actually creating an activity.
for sending mail you can use FM
SO_SEND_MAIL_DOCUMENT_AP1
this is just one way
another way is which stephen suggests
you can use the personalised mail form functionality ,this is good in a way u neednt do any coding it will solve ur purpose in standard way.
another way is when you create campaign and when an inbound activity is created for the every survey response
this way you can send multiple mail and also for more than one or even n number of activity partners ,we can create the activity for the same
best regards
ashish

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

IOS X Yosemite, iPhoto 9.6, Facebook albums with more than 25 pictures

I have linked my Facebook albums to iPhoto. I started using iOS X Yosemite and iPhoto 9.6 a couple of days ago. Now when I select in iPhoto any Facebook album with more than 25 pictures, it automatically removes all pictures after the 25th picture. However, the pictures remain in Facebook but I want to view them in iPhoto. How can I retrieve them?

The latest iOS (10.10.2) and iPhoto (9.6.1) solved this problem. Thanks to Apple for informing me by phone!

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

How come its not letting me video chat with more than one people?

i've chatted before with more than 2 people on ichat but for some reason its not letting me. The plus sign will only show like 2 names meanwhile there are other people on my buddy list that i want to add not the ones in the plus sign. I've exited out of the chat i had with one person and went to the other person to make sure theres is working and it does. so why can;t i chat with 3 people then, and how to add them. If someone can help that would be great! Thanks!

Perthaps http://docs.info.apple.com/article.html?artnum=304486
and http://docs.info.apple.com/article.html?artnum=301050
play into this...
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the gold or green star in order to mark this reply as "helpful" or "solved")

PDFA 1b Dictionary with more than 4095 entries

Hi,
I am trying to create a PDFA 1b complaint document using a word document. Acrobat does create a PDF A document but when I try to verify complaince with PDFA 1b using the preflight option it reports error as " Syntac problem: dictionary with more than 4095 entries". How do I solve this problem?
Thanks

Sorry for the split, but the editor messes up the code if I post such a long message.
The APPLY CHANGES button triggers an event I catch in the following way:
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
* Calculate sel_lines.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = ref1.
CALL METHOD ref1->check_changed_data.
CASE r_ucomm.
    WHEN 'ZAPPLYCHANGES'.
      REFRESH mod_lfa1.
      LOOP AT it_lfa1 INTO wa_lfa1 WHERE sel = 'X'. "to get a table of the modified rows
        APPEND wa_lfa1 TO mod_lfa1.
      ENDLOOP.
Here I can see that the ZZVMDCUI field is not changed for every line, even if I have modified it. And also, SEL gets always the value of the FIRST LETTER (obviously, since it's a flag) of the ZZVMDCUI modification I made.
This sounds to me that actually my report see the SEL flag as the only 'editable' field; I can write contents in another editable field but the only modified one is just SEL (which is the first).
Can you please give an hint on that ? Thanks in advance

[solved] keycodes with more than 8bits

Similar Messages

Maybe you are looking for