[SOLVED] linux-ck 3.17.4-1 fails to load nvidia - xserver dies
Hi,
since upgrading linux-ck from 3.17.3-1 to .4-1, xserver doesn't start anymore because it can't load the nvidia module.
Downgrading solves this issue, no problems like this with the stock kernel…
I tried adding nvidia to initramfs, didn't help either.
Any ideas how to resolve this? Or Is this just a sit-and-wait-bug?
Last edited by cju (2014-11-24 07:39:27)
It says:
modprobe: ERROR: could not insert 'nvidia': invalid argument
Here the according X-log:
[ 60.383] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[ 60.383] (EE) NVIDIA: system's kernel log for additional error messages and
[ 60.383] (EE) NVIDIA: consult the NVIDIA README for details.
[ 60.383] (EE) No devices detected.
As said before, with 3.17.3-1ck, everything was fine…
Similar Messages
-
Failed to load nvidia kernel module
When I try to start x it outputs the following error
Failed to load nvidia kernel module
I'm trying to use the new nvidia-beta drivers from AUR but the same error occurs with ordinary nvidia drivers and the nv drivers. Under xorg.conf I currently have 'nvidia' next to driver and I've also put nvidia in the modules section of rc.conf
when I try to modprobe nvidia is just outputs 'module nvidia not found'Ended up booting into gnome using the vesa driver (max resolution was 800x600) and downloading the new nvidia beta setup from the nvidia website then going back into terminal and running it. Just had to download make from pacman and it compiled a new nvidia kernel module for me it seems. All works well with the new driver now.
Thanks. -
[solved] kernel 3.2.8 fails with loading nvidia and virtualbox modules
Topic says it. I just updated from kernel 3.2.7 to 3.2.8 and X won't start. The kernel fails to load the nvidia module with the follwing error: 'Exec format error'. Same for the virtualbox kernel modules. This is on x86_64, multilib and all testing repos enabled.
Downgrade to 3.2.7 by
pacman -S core/linux
solves the issue.
Last edited by Harey (2012-02-28 18:55:36)Allan wrote:Bug tracker...
https://bugs.archlinux.org/task/28695 -
[SOLVED] XOrg fails to load Nvidia driver on startup
Hi,
I'm having a fairly strange issue where XOrg is failing to load my driver when I start up my laptop. I'm using kdm, but this is causing it to fail. However, doing a simple
$sudo systemctl restart kdm
works, and everything starts up fine. When kdm is in the failed state, I see this:
$sudo systemctl status kdm
● kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2014-12-19 18:47:26 EST; 41s ago
Main PID: 247 (kdm)
CGroup: /system.slice/kdm.service
└─247 /usr/bin/kdm -nodaemon
Dec 19 18:47:26 laptop systemd[1]: Started K Display Manager.
Dec 19 18:47:27 laptop kdm[247]: X server died during startup
Dec 19 18:47:27 laptop kdm[247]: X server for display :0 cannot be started, session disabled
And in my XOrg log, I see:
[ 3.639]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 3.639]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 3.639] X Protocol Version 11, Revision 0
[ 3.639] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 3.639] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 3.639] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 3.639] Build Date: 10 December 2014 02:34:24PM
[ 3.639]
[ 3.639] Current version of pixman: 0.32.6
[ 3.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.639] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:47:26 2014
[ 3.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.649] (==) No Layout section. Using the first Screen section.
[ 3.649] (==) No screen section available. Using defaults.
[ 3.649] (**) |-->Screen "Default Screen Section" (0)
[ 3.649] (**) | |-->Monitor "<default monitor>"
[ 3.650] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.650] (==) Automatically adding devices
[ 3.650] (==) Automatically enabling devices
[ 3.650] (==) Automatically adding GPU devices
[ 3.658] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.658] Entry deleted from font path.
[ 3.659] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.659] Entry deleted from font path.
[ 3.659] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.660] Entry deleted from font path.
[ 3.660] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.660] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.660] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.660] (II) Loader magic: 0x818d80
[ 3.660] (II) Module ABI versions:
[ 3.660] X.Org ANSI C Emulation: 0.4
[ 3.660] X.Org Video Driver: 18.0
[ 3.660] X.Org XInput driver : 21.0
[ 3.660] X.Org Server Extension : 8.0
[ 3.662] (EE) systemd-logind: failed to get session: PID 267 does not belong to any known session
[ 3.663] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.663] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.664] (II) LoadModule: "glx"
[ 3.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.767] (II) Module glx: vendor="NVIDIA Corporation"
[ 3.767] compiled for 4.0.2, module version = 1.0.0
[ 3.767] Module class: X.Org Server Extension
[ 3.768] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 3.769] (==) Matched nouveau as autoconfigured driver 0
[ 3.769] (==) Matched nv as autoconfigured driver 1
[ 3.769] (==) Matched modesetting as autoconfigured driver 2
[ 3.769] (==) Matched fbdev as autoconfigured driver 3
[ 3.769] (==) Matched vesa as autoconfigured driver 4
[ 3.769] (==) Assigned the driver to the xf86ConfigLayout
[ 3.769] (II) LoadModule: "nouveau"
[ 3.769] (WW) Warning, couldn't open module nouveau
[ 3.769] (II) UnloadModule: "nouveau"
[ 3.769] (II) Unloading nouveau
[ 3.769] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.769] (II) LoadModule: "nv"
[ 3.769] (WW) Warning, couldn't open module nv
[ 3.769] (II) UnloadModule: "nv"
[ 3.769] (II) Unloading nv
[ 3.769] (EE) Failed to load module "nv" (module does not exist, 0)
[ 3.769] (II) LoadModule: "modesetting"
[ 3.769] (WW) Warning, couldn't open module modesetting
[ 3.769] (II) UnloadModule: "modesetting"
[ 3.769] (II) Unloading modesetting
[ 3.769] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.769] (II) LoadModule: "fbdev"
[ 3.769] (WW) Warning, couldn't open module fbdev
[ 3.769] (II) UnloadModule: "fbdev"
[ 3.769] (II) Unloading fbdev
[ 3.769] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.769] (II) LoadModule: "vesa"
[ 3.770] (WW) Warning, couldn't open module vesa
[ 3.770] (II) UnloadModule: "vesa"
[ 3.770] (II) Unloading vesa
[ 3.770] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.770] (EE) No drivers available.
[ 3.770] (EE)
Fatal server error:
[ 3.770] (EE) no screens found(EE)
[ 3.770] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3.770] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3.770] (EE)
Which looks like it loads my nvidia driver, but then just decides not to use it for some reason... After I restart kdm, it seems to use the driver fine:
[ 78.897]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 78.897]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 78.897] X Protocol Version 11, Revision 0
[ 78.897] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 78.897] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 78.897] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 78.897] Build Date: 10 December 2014 02:34:24PM
[ 78.897]
[ 78.897] Current version of pixman: 0.32.6
[ 78.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:48:38 2014
[ 78.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.897] (==) No Layout section. Using the first Screen section.
[ 78.897] (==) No screen section available. Using defaults.
[ 78.897] (**) |-->Screen "Default Screen Section" (0)
[ 78.897] (**) | |-->Monitor "<default monitor>"
[ 78.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.898] (==) Automatically adding devices
[ 78.898] (==) Automatically enabling devices
[ 78.898] (==) Automatically adding GPU devices
[ 78.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 78.898] Entry deleted from font path.
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.898] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 78.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.898] (II) Loader magic: 0x818d80
[ 78.898] (II) Module ABI versions:
[ 78.898] X.Org ANSI C Emulation: 0.4
[ 78.898] X.Org Video Driver: 18.0
[ 78.898] X.Org XInput driver : 21.0
[ 78.898] X.Org Server Extension : 8.0
[ 78.900] (EE) systemd-logind: failed to get session: PID 542 does not belong to any known session
[ 78.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.901] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.901] (II) LoadModule: "glx"
[ 78.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.913] (II) Module glx: vendor="NVIDIA Corporation"
[ 78.913] compiled for 4.0.2, module version = 1.0.0
[ 78.913] Module class: X.Org Server Extension
[ 78.913] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
[ 78.914] (==) Matched nvidia as autoconfigured driver 0
[ 78.914] (==) Matched nouveau as autoconfigured driver 1
[ 78.914] (==) Matched nv as autoconfigured driver 2
[ 78.914] (==) Matched nouveau as autoconfigured driver 3
[ 78.914] (==) Matched nv as autoconfigured driver 4
[ 78.914] (==) Matched modesetting as autoconfigured driver 5
[ 78.914] (==) Matched fbdev as autoconfigured driver 6
[ 78.914] (==) Matched vesa as autoconfigured driver 7
[ 78.914] (==) Assigned the driver to the xf86ConfigLayout
[ 78.914] (II) LoadModule: "nvidia"
[ 78.914] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.920] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.920] compiled for 4.0.2, module version = 1.0.0
[ 78.920] Module class: X.Org Video Driver
[ 78.920] (II) LoadModule: "nouveau"
[ 78.921] (WW) Warning, couldn't open module nouveau
[ 78.921] (II) UnloadModule: "nouveau"
[ 78.921] (II) Unloading nouveau
[ 78.921] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.921] (II) LoadModule: "nv"
[ 78.921] (WW) Warning, couldn't open module nv
[ 78.921] (II) UnloadModule: "nv"
[ 78.921] (II) Unloading nv
[ 78.921] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.921] (II) LoadModule: "modesetting"
[ 78.921] (WW) Warning, couldn't open module modesetting
[ 78.921] (II) UnloadModule: "modesetting"
[ 78.921] (II) Unloading modesetting
[ 78.921] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 78.921] (II) LoadModule: "fbdev"
[ 78.922] (WW) Warning, couldn't open module fbdev
[ 78.922] (II) UnloadModule: "fbdev"
[ 78.922] (II) Unloading fbdev
[ 78.922] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.922] (II) LoadModule: "vesa"
[ 78.922] (WW) Warning, couldn't open module vesa
[ 78.922] (II) UnloadModule: "vesa"
[ 78.922] (II) Unloading vesa
[ 78.922] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.922] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 78.922] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.922] (++) using VT number 7
[ 78.935] (II) Loading sub module "fb"
[ 78.935] (II) LoadModule: "fb"
[ 78.935] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.936] (II) Module fb: vendor="X.Org Foundation"
[ 78.936] compiled for 1.16.2.901, module version = 1.0.0
[ 78.936] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.936] (II) Loading sub module "wfb"
[ 78.936] (II) LoadModule: "wfb"
[ 78.936] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.937] (II) Module wfb: vendor="X.Org Foundation"
[ 78.937] compiled for 1.16.2.901, module version = 1.0.0
[ 78.937] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.937] (II) Loading sub module "ramdac"
[ 78.937] (II) LoadModule: "ramdac"
[ 78.937] (II) Module "ramdac" already built-in
[ 78.939] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.939] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 78.939] (==) NVIDIA(0): RGB weight 888
[ 78.939] (==) NVIDIA(0): Default visual is TrueColor
[ 78.939] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 78.940] (**) NVIDIA(0): Enabling 2D acceleration
[ 79.610] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 79.610] (II) NVIDIA(0): 3D Vision stereo.
[ 79.610] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 79.612] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 79.612] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 79.612] (--) NVIDIA(0): VideoBIOS: 80.04.67.00.06
[ 79.612] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 79.616] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 79.616] (--) NVIDIA(0): DFP-2
[ 79.616] (--) NVIDIA(0): DFP-3
[ 79.616] (--) NVIDIA(0): DFP-4
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal LVDS
[ 79.616] (--) NVIDIA(GPU-0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 79.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 79.616] (**) NVIDIA(0): has been enabled on all display devices.)
[ 79.618] (==) NVIDIA(0):
[ 79.618] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 79.618] (==) NVIDIA(0): will be used as the requested mode.
[ 79.618] (==) NVIDIA(0):
[ 79.619] (II) NVIDIA(0): Validated MetaModes:
[ 79.619] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 79.619] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 80.144] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 80.144] (--) NVIDIA(0): option
[ 80.144] (--) Depth 24 pixmap format is 32 bpp
[ 80.144] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.144] (II) NVIDIA: access.
[ 80.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 80.150] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 80.150] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 80.150] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 80.150] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 80.150] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 80.150] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 80.150] (II) NVIDIA(0): Config Options in the README.
[ 80.155] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 80.532] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.532] (==) NVIDIA(0): Backing store enabled
[ 80.532] (==) NVIDIA(0): Silken mouse enabled
[ 80.533] (==) NVIDIA(0): DPMS enabled
[ 80.533] (II) Loading sub module "dri2"
[ 80.533] (II) LoadModule: "dri2"
[ 80.533] (II) Module "dri2" already built-in
[ 80.533] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.533] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.533] (--) RandR disabled
[ 80.539] (II) Initializing extension GLX
[ 80.605] (II) config/udev: Adding input device Power Button (/dev/input/event14)
[ 80.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.605] (II) LoadModule: "evdev"
[ 80.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.607] (II) Module evdev: vendor="X.Org Foundation"
[ 80.607] compiled for 1.16.2, module version = 2.9.1
[ 80.607] Module class: X.Org XInput Driver
[ 80.607] ABI class: X.Org XInput driver, version 21.0
[ 80.607] (II) Using input driver 'evdev' for 'Power Button'
[ 80.607] (**) Power Button: always reports core events
[ 80.607] (**) evdev: Power Button: Device: "/dev/input/event14"
[ 80.608] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.608] (--) evdev: Power Button: Found keys
[ 80.608] (II) evdev: Power Button: Configuring as keyboard
[ 80.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input18/event14"
[ 80.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.608] (**) Option "xkb_rules" "evdev"
[ 80.608] (**) Option "xkb_model" "pc104"
[ 80.608] (**) Option "xkb_layout" "us"
[ 80.635] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.635] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.635] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.635] (**) Video Bus: always reports core events
[ 80.635] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.635] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.635] (--) evdev: Video Bus: Found keys
[ 80.635] (II) evdev: Video Bus: Configuring as keyboard
[ 80.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input19/event15"
[ 80.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.635] (**) Option "xkb_rules" "evdev"
[ 80.635] (**) Option "xkb_model" "pc104"
[ 80.635] (**) Option "xkb_layout" "us"
[ 80.636] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 80.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.636] (II) Using input driver 'evdev' for 'Power Button'
[ 80.636] (**) Power Button: always reports core events
[ 80.636] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 80.636] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.636] (--) evdev: Power Button: Found keys
[ 80.636] (II) evdev: Power Button: Configuring as keyboard
[ 80.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input17/event13"
[ 80.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.636] (**) Option "xkb_rules" "evdev"
[ 80.636] (**) Option "xkb_model" "pc104"
[ 80.636] (**) Option "xkb_layout" "us"
[ 80.637] (II) config/udev: Adding input device Lid Switch (/dev/input/event11)
[ 80.637] (II) No input driver specified, ignoring this device.
[ 80.637] (II) This device may have been added with another device file.
[ 80.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event12)
[ 80.637] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.637] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.637] (**) Sleep Button: always reports core events
[ 80.637] (**) evdev: Sleep Button: Device: "/dev/input/event12"
[ 80.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.637] (--) evdev: Sleep Button: Found keys
[ 80.637] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16/event12"
[ 80.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.637] (**) Option "xkb_rules" "evdev"
[ 80.637] (**) Option "xkb_model" "pc104"
[ 80.637] (**) Option "xkb_layout" "us"
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.639] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event3)
[ 80.639] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 80.639] (**) LOGITECH G110 G-keys: always reports core events
[ 80.639] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event3"
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 80.639] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 80.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/0003:046D:C22B.0003/input/input7/event3"
[ 80.639] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 80.639] (**) Option "xkb_rules" "evdev"
[ 80.639] (**) Option "xkb_model" "pc104"
[ 80.639] (**) Option "xkb_layout" "us"
[ 80.639] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event4)
[ 80.639] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.639] (**) Gaming Keyboard G110: always reports core events
[ 80.639] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event4"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/0003:046D:C22A.0004/input/input8/event4"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.640] (**) Option "xkb_layout" "us"
[ 80.640] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event5)
[ 80.640] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.640] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.640] (**) Gaming Keyboard G110: always reports core events
[ 80.640] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event5"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.1/0003:046D:C22A.0005/input/input9/event5"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.641] (**) Option "xkb_layout" "us"
[ 80.641] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event1)
[ 80.641] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[ 80.641] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.641] (**) Razer Razer Lachesis: always reports core events
[ 80.641] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event1"
[ 80.641] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.641] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[ 80.641] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[ 80.641] (--) evdev: Razer Razer Lachesis: Found relative axes
[ 80.641] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[ 80.641] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[ 80.641] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[ 80.641] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[ 80.641] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:1532:000C.0001/input/input5/event1"
[ 80.641] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 13)
[ 80.642] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[ 80.642] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[ 80.642] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[ 80.642] (II) No input driver specified, ignoring this device.
[ 80.642] (II) This device may have been added with another device file.
[ 80.643] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[ 80.643] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[ 80.643] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.643] (**) Razer Razer Lachesis: always reports core events
[ 80.643] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[ 80.643] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.643] (--) evdev: Razer Razer Lachesis: Found keys
[ 80.643] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[ 80.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:1532:000C.0002/input/input6/event2"
[ 80.643] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 14)
[ 80.643] (**) Option "xkb_rules" "evdev"
[ 80.643] (**) Option "xkb_model" "pc104"
[ 80.643] (**) Option "xkb_layout" "us"
[ 80.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 80.643] (II) No input driver specified, ignoring this device.
[ 80.643] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 80.645] (II) No input driver specified, ignoring this device.
[ 80.645] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event17)
[ 80.645] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 80.645] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 80.645] (**) BisonCam, NB Pro: always reports core events
[ 80.645] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event17"
[ 80.645] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x512
[ 80.645] (--) evdev: BisonCam, NB Pro: Found keys
[ 80.645] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 80.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input23/event17"
[ 80.645] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 15)
[ 80.645] (**) Option "xkb_rules" "evdev"
[ 80.645] (**) Option "xkb_model" "pc104"
[ 80.645] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.646] (**) Option "xkb_rules" "evdev"
[ 80.646] (**) Option "xkb_model" "pc104"
[ 80.646] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 80.646] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 80.647] (II) LoadModule: "synaptics"
[ 80.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.647] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.647] compiled for 1.16.0, module version = 1.8.1
[ 80.647] Module class: X.Org XInput Driver
[ 80.647] ABI class: X.Org XInput driver, version 21.0
[ 80.647] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 80.647] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.647] (**) Option "Device" "/dev/input/event20"
[ 80.756] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4660 (res 47)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 80.757] (**) Option "TapButton1" "1"
[ 80.757] (**) Option "TapButton2" "2"
[ 80.757] (**) Option "TapButton3" "3"
[ 80.757] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input22/event20"
[ 80.810] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 80.810] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.811] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 80.811] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 80.811] (II) No input driver specified, ignoring this device.
[ 80.811] (II) This device may have been added with another device file.
[ 88.265] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.265] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.291] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: 1680x1050_60_0 @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 89.221] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 89.221] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 90.639] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 90.639] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93.745] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 93.745] (II) NVIDIA(GPU-0): 3D Vision stereo.
Notably, the following lines appear in the working case, but not the broken case:
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
Does anyone know what might be going on here?
Last edited by straemer (2014-12-20 13:03:58)Hmmmm, that doesn't seem to be the issue. I have a nvidia geforce gtx 670mx. The nvidia website does link me to the 340xx driver for that card, but downgrading to that version still has the same issue. I suspect the issue is in Xorg, since it seems to load the module, but then decides it doesn't have a driver to run for some reason.
-
[Solved]Vmware Player - Blocking File System not fails to load
All the mods load fine, except Vmblock.
this is what i get when i run vmplayer.
make: *** /tmp/modconfig-NtGU4D/vmblock-only: No such file or directory. Stop.
Starting VMware Services:
Virtual machine monitor....
(finishes loading without problems)
i suspect this has to do with the fact that i couldn't patch it following the wiki's guide (vmnet patched fine).
I have the latest vmware player and the current arch linux kernel (3.10.7-1)
The patch doesn't seem to find the file it's meant to patch.
I'd also like to know if i can safely ignore this.
Edit: I suspect i just made a failure during the installation, i reinstalled it and it loaded this time... i think.
Last edited by rabcor (2013-08-23 09:10:09)andy_v wrote:Make sure you create a 'compiz.desktop' file under /usr/share/applications.
And that fixed it! Don't know how I overlooked that. Thanks! -
"Failed to load the NVIDIA kernel module" [SOLVED]
Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)." -
How to solve the issue "CUV check user equivalence failed" ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ? -
How to install Linux on UEFI systems where GRUB fail to install?
A few of us are asking:
How to install Linux on UEFI systems where GRUB fail to install? Because after installing Linux, my MBR is messed up, and I get a "no operating system found" at system startup.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.
Solved!
Go to Solution.Hi again,
I would like to answer to another question, just in case:
Question: Can I dual boot Win7 and Linux on a UEFI capable bios?
Answer: Yes you can. If your HDD is formatted in MBR partition table (or msdos) than you can install first windows 7 and than the distro of your choice. BUT, careful, if you install windows from a DVD media it will convert your HDD in GPT partition table and dual boot will be almost impossible... (or will give you a lot of headache) to avoid this, dump the win7 iso to an usb using Windows 7 USB/DVD Download Tool. Installing from USB will not change the hdd in GPT partition table.
take care
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode. -
Error Failed to load database information - access report from jsp in linux
Hi,
While accessing the report from my jsp file I got the below error. I am using Crystal Report Server 2008 V1 in linux environment.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Failed to load database information.
Error in File rpt_dp_customer_stmt {9515FCCB-0245-11E0-9DA4-000C29D5AD7D}.rpt:
Failed to load database information.---- Error code:-2147482931 Error code name:failed
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
org.apache.jsp.formula_jsp._jspService(formula_jsp.java:117)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Moreover, in my jsp i am passing the data base parameter like below,
PropertyBag logonProperties = new PropertyBag();;
mainPB.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, logonProperties);
mainPB.put(PropertyBagHelper.CONNINFO_DATABASE_DLL, "libcrdb_jdbc.so");
logonProperties.put("Database Class Name", "oracle.jdbc.driver.OracleDriver");
logonProperties.put("Use JDBC", "true");
logonProperties.put("Connection URL", url);
logonProperties.put("Server", dbserver);
Also I set the LD_LIBRARY_PATH in linux machine, because i have the libcrdb_jdbc.so file on that path.
/home/ReportServer/bobje/enterprise120/linux_x86/crpe/Its working. I gave crdb_jdbc.dll name in the connection info
-
I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine. -
[Solved] Ncmpcpp Visualizer Failed To Load (Blank)
I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
I used config from one of our member via this thread. here is my .ncmpcpp/config:
##### connection settings #####
mpd_host = "localhost"
mpd_port = "6600"
mpd_music_dir = "/home/drfreddy/Music"
mpd_connection_timeout = "5"
mpd_crossfade_time = "1"
mpd_communication_mode = "notifications" (polling/notifications)
visualizer_fifo_path = "/tmp/mpd.fifo"
visualizer_output_name = "my_fifo"
visualizer_sync_interval = "1"
visualizer_type = "wave" (spectrum/wave)
system_encoding = "utf-8"
##### delays #####
playlist_disable_highlight_delay = "5"
message_delay_time = "4"
# Playlist
song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
now_playing_prefix = "$b$1» "
now_playing_suffix = "$/b"
playlist_display_mode = "columns" (classic/columns)
autocenter_mode = "yes"
centered_cursor = "yes"
cyclic_scrolling = "yes"
mouse_list_scroll_whole_page = "no"
# # Bars
song_status_format = "{%a - }{%t - }{%b}"
progressbar_look = "─╼ "
titles_visibility = "no"
header_visibility = "no"
statusbar_visibility = "yes"
# Browser
browser_playlist_prefix = "$2plist »$9 "
browser_display_mode = "classic" (classic/columns)
# Colors
discard_colors_if_item_is_selected = "yes"
header_window_color = "default"
volume_color = "cyan"
state_line_color = "white"
state_flags_color = "green"
main_window_color = "default"
color1 = "cyan"
color2 = "black"
main_window_highlight_color = "red"
progressbar_color = "cyan"
statusbar_color = "white"
active_column_color = "red"
visualizer_color = "cyan"
# Others
song_window_title_format = "MPD: {%a > }{%t}|{%f}"
search_engine_display_mode = "columns" (classic/columns)
follow_now_playing_lyrics = "yes"
display_screens_numbers_on_start = "no"
user_interface = "alternative" (classic/alternative)
And here is my .mpdconf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/drfreddy/Music/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#state_file "~/.mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "drfreddy"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "Beats by Dr. Freddy"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_type "software" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Client TCP keep alive #######################################################
# For clients connected by TCP on supported platforms.
# Allows detection of dangling connections due to clients disappearing from
# the network without closing their connections.
# This is not usually necessary but can be useful in cases such as wifi connectected
# clients that go in and out of network range or turn off wifi without closing their
# connections. Combined with low max_connections this can soon cause clients to not
# be able to connect.
# Enable tcp keepalive on new client connections (default is "no")
#tcp_keep_alive "no"
# Time in seconds since the last communication on the connection and before
# the keepalive probing is started. (default is 7200 seconds)
#tcp_keep_alive_idle "7200"
# Interval in seconds between keepalive probes, once a probe started.
# (default is 75 seconds)
#tcp_keep_alive_interval "75"
# Number of failed probes before the connection is pronounced dead and
# the connection is closed. (default is 9 times)
#tcp_keep_alive_count "9"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
Can somebody tell me how to enable the visualization? Am I missing something?
Last edited by Archer1X (2013-02-07 10:48:34)Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
visualizer_look = "+|"
Anybody have a better look for the visualizer?
I also have tried several figures like "=="..hmm..kinda like it..
Last edited by Archer1X (2013-02-07 10:49:13) -
Failed to load database information in linux
Hi,
I installed crystal report server 2008 v1 in suse linux 10 (64 bit). I designed report in windows by using crystal report developer edition XI.
When i try to view the report in crystal report server 2008 v1 in suse linux error like "Failed to load database information"
We are using oracle 10g which is running in another linux machine with in the network. We dont insalled oracle client in suse linux 10.
Please help me to resolve this.Hi
First make sure that You have installed/mounted Oracle 10g client on Suse linux machine where you have crystal report server 2008 v1
if you plan to install 64-bit oracle 10g client then in LD_LIBRARY_PATH make sure to point to "lib32", as you need 32-bit lib files to refresh your report
Regards
Ashwini -
Adobe Reader 9 plugin fails to load on RedHat Linux OS
I built a plugin using Acrobat SDK 9 for Adobe reader 9.5 on Redhat Linux OS. I am able to successfully build and reader enable the plugin.
But when I start Adobe Reader 9, the plugin fails to load with error "Undefined Symbol: RestorePlugInFrame".
As I understand, on Linux platform with C++ enabled, the RestorePlugInFrame function should not be required.
Is there any other flag I need to set while building the plugin?
Appreciate any suggestions in resolving this issue. Thank you.
-SrilathaYes. Adobe support told me that the license key I used to build Adobe 8 plugin on Linux should work for Adobe 9 plugin too. Using SignPlugin tool and the license key I was able to successfully reader enable the plugin.
-Srilatha -
Error on Linux 64 bit "Failed to load LDAP Library: libibmldap.so"
Hi Experts,
Currently i am testing out OBIEE 11g application on Linux (64bit). I am running into the following exception when i try to configure the LDAP authentication provider for authentication. The error message is "Failed to load LDAP Library: libibmldap.so" However i cannot be able to reproduce in this same issue on my windows environment. I am sure this is some lib issue on Linux 64bit. Please advice me in case if i miss out any configuration or in case if you know the work around to resolve this issue.
Thank you
Edited by: user10476276 on Oct 13, 2010 8:47 PMHi Srikanth ,
Iam stuck with the same above error configuring LDAP connectivity for OBIEE 11g and I get the same error . I tried following John's blog but I dont see the libibmldap file at all in our linux 64bit set up . Any ideas pls ...
Thanks
Karthik -
LibGL error: failed to load driver: i965 [Solved]
Executing some wine programs I get this messages:
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Following the suggestion I get:
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/i965_dri.so
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/swrast_dri.so
What is that lib32 xorg module file that appears missing?
Some informations that might be useful...
# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
# glxinfo | grep 'dir\|^Open'
direct rendering: Yes
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL version string: 3.0 Mesa 9.0.2
OpenGL shading language version string: 1.30
OpenGL extensions:
# uname -a
Linux macthearcher 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64 GNU/Linux
Last edited by ezzetabi (2013-02-08 09:33:19)According to wine#Graphics_Drivers it is lib32-intel-dri.
Maybe you are looking for
-
What are my options for having my case for my Early 2008 white macbook repaired?
I own an early 2008 white macbook and as most people know they were notorious for ending up with cracks in the plastic body. Well, mine has it's fair share of cracks and the little nob on the bottom used for securing the battery in place has also bro
-
AUR for LibreOffice GIT (can't upload to AUR?)
I have created a PKGBUILD for LibreOffice that builds from the GIT master branch, but the AUR won't allow me to upload it, so I'm putting it here. Source package: http://8bitboobs.com/stuff/libreoffice- … src.tar.gz PKGBUILD: # Maintainer: Maxwell Pr
-
Migration from Crystal IX to BO-XI using java sdk-- very urgent
Post Author: Pranav.Sharma CA Forum: Migration to XI R2 Need help in migration from Crystal Report IX to BO-XI. Currently we are using CR IX and Java SDK to access reports from J2ee application. These reports reside on remote server where we have sha
-
Hi, I am getting a error in the RWB: Self-Test Status: HTTP request failed. Error code: "500". Error message: "Internal Server Error [http://host:port/AdapterFramework/rtc]" I have a mail channel setup that is running on this Adapter Engine. I am abl
-
I had several problems using BBDM for MAC as have so many others and followed the advice of one the posts on this board. I now cannot find that post so can't give credit to the poster but the solution worked for me and follows: Delete all prior sync