[SOLVED] log into KDE given a blank black screen with mouse cursor

hi,
noticed kwin using much higher cpu usage then normal, restarted KDE, everything seemed ok and then, while copying a file over to a samba share, my desktop went black with only a mouse cursor.
Restarted KDE, rebooted pc, reinstalled KDE (everything), xorg, nvidia, deleted xorg.conf created new user but nothing will give me my desktop back
once when i logged on, i had a kde crash report and messages on my widgets saying missing components. Tried to submit bug but missing debugging tools.
sometimes KDE won't log in at all.
forced an fsck on next boot with no errors found.
please help
thanks
EDIT: [solved] I had filled up my /var partition. cleaned pacman cache and all is good again. Phew!
Last edited by Fungyo (2009-12-07 08:10:40)

Hi,
Have you tried the suggestion Cyber_Defend_Team provided?
If the issue persists, start the computer in Safe mode to check the result:
If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
in safe mode and then remove the program that's causing the problem.
If it still in the safe mode, we may need to repair the installation with the recovery media.
In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
Karen Hu
TechNet Community Support

Similar Messages

Gnome Black Screen with Mouse Cursor after Login

I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

there are a lot of processess running... dunno killing which process will not cause a problem
here is the xorg log ( sorry i dont have much knowlegde to analyse it )
[ 2957.489]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 2957.493] X Protocol Version 11, Revision 0
[ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
[ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
[ 2957.497] Build Date: 21 September 2014 10:53:13AM
[ 2957.498]
[ 2957.499] Current version of pixman: 0.32.6
[ 2957.501] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
[ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2957.507] (==) No Layout section. Using the first Screen section.
[ 2957.507] (==) No screen section available. Using defaults.
[ 2957.507] (**) |-->Screen "Default Screen Section" (0)
[ 2957.507] (**) | |-->Monitor "<default monitor>"
[ 2957.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2957.507] (==) Automatically adding devices
[ 2957.507] (==) Automatically enabling devices
[ 2957.507] (==) Automatically adding GPU devices
[ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2957.507] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2957.507] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2957.507] (II) Loader magic: 0x818d80
[ 2957.507] (II) Module ABI versions:
[ 2957.507] X.Org ANSI C Emulation: 0.4
[ 2957.507] X.Org Video Driver: 18.0
[ 2957.507] X.Org XInput driver : 21.0
[ 2957.507] X.Org Server Extension : 8.0
[ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2957.512] (II) LoadModule: "glx"
[ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2957.514] (II) Module glx: vendor="X.Org Foundation"
[ 2957.514] compiled for 1.16.1, module version = 1.0.0
[ 2957.514] ABI class: X.Org Server Extension, version 8.0
[ 2957.514] (==) AIGLX enabled
[ 2957.514] (==) Matched intel as autoconfigured driver 0
[ 2957.514] (==) Matched intel as autoconfigured driver 1
[ 2957.514] (==) Matched modesetting as autoconfigured driver 2
[ 2957.514] (==) Matched fbdev as autoconfigured driver 3
[ 2957.514] (==) Matched vesa as autoconfigured driver 4
[ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
[ 2957.514] (II) LoadModule: "intel"
[ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2957.515] (II) Module intel: vendor="X.Org Foundation"
[ 2957.515] compiled for 1.16.1, module version = 2.99.916
[ 2957.515] Module class: X.Org Video Driver
[ 2957.515] ABI class: X.Org Video Driver, version 18.0
[ 2957.515] (II) LoadModule: "modesetting"
[ 2957.515] (WW) Warning, couldn't open module modesetting
[ 2957.515] (II) UnloadModule: "modesetting"
[ 2957.515] (II) Unloading modesetting
[ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "fbdev"
[ 2957.515] (WW) Warning, couldn't open module fbdev
[ 2957.515] (II) UnloadModule: "fbdev"
[ 2957.515] (II) Unloading fbdev
[ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "vesa"
[ 2957.515] (WW) Warning, couldn't open module vesa
[ 2957.515] (II) UnloadModule: "vesa"
[ 2957.515] (II) Unloading vesa
[ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2957.516] (++) using VT number 1
[ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2957.517] (==) intel(0): RGB weight 888
[ 2957.517] (==) intel(0): Default visual is TrueColor
[ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
[ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 2957.517] (II) intel(0): Enabled output LVDS1
[ 2957.517] (II) intel(0): Output VGA1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VGA1
[ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output HDMI1
[ 2957.517] (II) intel(0): Output TV1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output TV1
[ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VIRTUAL1
[ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[ 2957.517] (==) intel(0): TearFree disabled
[ 2957.517] (==) intel(0): DPI set to (96, 96)
[ 2957.517] (II) Loading sub module "dri2"
[ 2957.517] (II) LoadModule: "dri2"
[ 2957.517] (II) Module "dri2" already built-in
[ 2957.517] (II) Loading sub module "present"
[ 2957.517] (II) LoadModule: "present"
[ 2957.517] (II) Module "present" already built-in
[ 2957.517] (==) Depth 24 pixmap format is 32 bpp
[ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 2957.518] (==) intel(0): Backing store enabled
[ 2957.518] (==) intel(0): Silken mouse enabled
[ 2957.518] (II) intel(0): HW Cursor enabled
[ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2957.518] (==) intel(0): DPMS enabled
[ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 2957.518] (II) intel(0): [DRI2] Setup complete
[ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
[ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
[ 2957.518] (II) intel(0): hardware support for Present enabled
[ 2957.518] (==) intel(0): display hotplug detection enabled
[ 2957.518] (--) RandR disabled
[ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2957.569] (II) AIGLX: Loaded and initialized i965
[ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
[ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2957.636] (II) LoadModule: "evdev"
[ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
[ 2957.637] compiled for 1.16.0, module version = 2.9.0
[ 2957.637] Module class: X.Org XInput Driver
[ 2957.637] ABI class: X.Org XInput driver, version 21.0
[ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
[ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 2957.638] (**) Video Bus: always reports core events
[ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2957.638] (--) evdev: Video Bus: Found keys
[ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
[ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
[ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 2957.638] (**) Option "xkb_rules" "evdev"
[ 2957.638] (**) Option "xkb_model" "pc104"
[ 2957.638] (**) Option "xkb_layout" "us"
[ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
[ 2957.670] (**) Power Button: always reports core events
[ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2957.670] (--) evdev: Power Button: Found keys
[ 2957.670] (II) evdev: Power Button: Configuring as keyboard
[ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2957.670] (**) Option "xkb_rules" "evdev"
[ 2957.670] (**) Option "xkb_model" "pc104"
[ 2957.670] (**) Option "xkb_layout" "us"
[ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2957.671] (II) No input driver specified, ignoring this device.
[ 2957.671] (II) This device may have been added with another device file.
[ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2957.672] (**) Sleep Button: always reports core events
[ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2957.672] (--) evdev: Sleep Button: Found keys
[ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
[ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2957.672] (**) Option "xkb_rules" "evdev"
[ 2957.672] (**) Option "xkb_model" "pc104"
[ 2957.672] (**) Option "xkb_layout" "us"
[ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
[ 2957.674] (II) No input driver specified, ignoring this device.
[ 2957.674] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
[ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2957.675] (**) Option "xkb_rules" "evdev"
[ 2957.675] (**) Option "xkb_model" "pc104"
[ 2957.675] (**) Option "xkb_layout" "us"
[ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 2957.675] (II) LoadModule: "synaptics"
[ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
[ 2957.676] compiled for 1.16.0, module version = 1.8.1
[ 2957.676] Module class: X.Org XInput Driver
[ 2957.676] ABI class: X.Org XInput driver, version 21.0
[ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.676] (**) Option "Device" "/dev/input/event11"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 2957.710] (**) Option "TapButton1" "1"
[ 2957.710] (**) Option "TapButton2" "2"
[ 2957.710] (**) Option "TapButton3" "3"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
[ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
[ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
[ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 2957.712] (**) ALPS PS/2 Device: always reports core events
[ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
[ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
[ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
[ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 2957.714] (**) Dell WMI hotkeys: always reports core events
[ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
[ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
[ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 2957.714] (**) Option "xkb_rules" "evdev"
[ 2957.714] (**) Option "xkb_model" "pc104"
[ 2957.714] (**) Option "xkb_layout" "us"
[ 2963.887] (II) evdev: Dell WMI hotkeys: Close
[ 2963.887] (II) UnloadModule: "evdev"
[ 2963.887] (II) systemd-logind: releasing fd for 13:69
[ 2963.949] (II) evdev: ALPS PS/2 Device: Close
[ 2963.950] (II) UnloadModule: "evdev"
[ 2963.950] (II) systemd-logind: releasing fd for 13:74
[ 2964.016] (II) UnloadModule: "synaptics"
[ 2964.016] (II) systemd-logind: releasing fd for 13:75
[ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2964.070] (II) UnloadModule: "evdev"
[ 2964.070] (II) systemd-logind: releasing fd for 13:64
[ 2964.123] (II) evdev: Sleep Button: Close
[ 2964.123] (II) UnloadModule: "evdev"
[ 2964.123] (II) systemd-logind: releasing fd for 13:67
[ 2964.156] (II) evdev: Power Button: Close
[ 2964.156] (II) UnloadModule: "evdev"
[ 2964.156] (II) systemd-logind: releasing fd for 13:66
[ 2964.183] (II) evdev: Video Bus: Close
[ 2964.183] (II) UnloadModule: "evdev"
[ 2964.183] (II) systemd-logind: releasing fd for 13:76
[ 2964.271] (EE) Server terminated successfully (0). Closing log file.

Server 2008 crash - black screen with mouse cursor

dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.

Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Vista Home Premium: Following install, black screen with mouse cursor

I have tried installing with Boot Camp (v2.0) twice now with the same result.
After the install is complete, the mac reboots into windows. I should see the Vista welcome screen but instead I get the black screen with a mouse cursor. The mouse is functional but clearly not much use!
A subsequent reboot brings up the options for restarting following an unclean shutdown of windows. Running in safe mode, the restart hangs. The last dll loaded was crcdisk.
I am running an OEM version - once activated (assuming I ever get that far) - the installation will be locked to the mac... which is fine.
Googling the problem reveals some early Vista beta issues with graphics that caused a similar problem. Does Vista have an issue with the 8800GT that is fitted in my Mac?
Any help/ideas/suggestions/fixes much appreciated. Rather stumped.
I would load up XP Pro but I dont have an installer with SP2 :/

Well my problem turns out to be a bad disk. I added two seagate 7200.11 750GB drives. Once which was making ominous ticking sounds. Vista took an age to install and really, I should have caught on earlier.
When I got a bunch of disk i/o errors creating a Fusion VM of XP Pro I decided to remove the disk and to try the other unit.
Vista installed very rapidly indeed and worked. Yes worked.
Hurrah! Problem solved.
Time to see about replacing that disk...

Xorg-server 1.6 - black screen with mouse cursor

Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

New screen standby bug (black screen with mouse cursor)

It seems there is a new issue with adobe messing up the monitor standby process.
This time the monitor turns of at the setup time, but after a few minutes turns on again showing a black screen with the mouse cursor in the middle.
Happens with me if i have any kind of webbrowser running in the background, as soon as i quit the browser my screen stays off again. But with open browser windows it often turns on again and shows the black screen with the mouse cursor.
Anyone else experiencing this problem?

I haven't been able to reproduce this. What makes you suspect Flash Player? Do you see this behavior if you uninstall the player? What output do you get if you type the following commands in a command prompt window?
powercfg -lastwake
powercfg -devicequery wake_armed
Thanks,
Chris

Windows 8.1 black screen with mouse cursor after login (HP 2730P)

I live in Canada and first just to confirm that Windows 8 with all Microsoft patches was running ok on my HP EliteBook 2730P NoteBook PC. Originally I had Windows XP running in it. With Win 8, I just lost few unique HP
applications.
But last night, just after my upgrade to Windows 8.1, I had the blank screen problem after the login, as you already described. I went to HP and Intel web sites for some help and fixes but nothing really helpful. According
to what I red, it's always someone else responsability but not their's or the easy way to get out of it, not supported on Windows 8 and above. But as my (not so old) HP 2730P is a NoteBook PC that I am used to work with, I
did a lot of researches to make it work fine with Win 8 and now with 8.1 .
So, after many hours on Internet I finally corrected my problem the same way as ghoust1101 showed previously; with the Info and instructions on youtube.com/watch?v=Rgje-t0OLdI
After the sfc /scannow , I got a message saying that many errors and corrupted files were fixed, plus as showed, I deleted "c:\Windows Activation Technologies", which corrected my problem. Done a reboot and everything was fine after
showing me the correct Windows 8.1 screen and the rest is to get familiar with it.
Hope this could help...

Hi,
Actually, I'm not sure what your exactlly problem it is, what's you meaning of Black Screen? All the screen black or just background? While Glad to see your problem resolved, Hope your experience is helpful with others.
Roger Lu
TechNet Community Support

Black Screen with mouse cursor

Hello
We are an enterprise organization with staffs logging in to their systems using domain username and password.
For some of our users having Windows 7 as OS, when they log in with their domain credentials a blank screen appears with movable mouse cursor, this screen does not go away until we disconnect them from LAN as well as wireless after which only the login
happens.
Kindly suggest how to resolve this issue

Hi,
Have you tried the suggestion Cyber_Defend_Team provided?
If the issue persists, start the computer in Safe mode to check the result:
If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
in safe mode and then remove the program that's causing the problem.
If it still in the safe mode, we may need to repair the installation with the recovery media.
In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
Karen Hu
TechNet Community Support

Blank black screen with just mouse pointer after logging in windows 8.1

First of all On starting the system, it was taking much longer time than usual.. Then after logging in it showed only a blank black screen with white mouse pointer.. had to force shut down (shut down also took longer time).. on starting went to safe mode and ran extensive system check.. HARD DRIVE SMART CHECK PASSED but HARD DRIVE SHORT DST CHECK FAILED...I have the recovery discs and the notebook is under warranty..

Hi
If your hard drive is failing on short DST test then you will need to contact HP in your local region and arrange with HP a repair ( Hard drive replacement ) . You say your machine is still in Warranty then the cost of shipping and repair will be covered by HP .
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Macbook does not shut down or restart. It stops at an blank white screen with the cursor moving around it. Updated to the latest software

I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

Black screen with mouse

Hey everyone ,
I have a Lenovo z50 70 laptop which is just 4 months old. Recently I exper muffled sounds from speakers and updated the driver. After installation and restarting and logging in I am left with black screen and cursor . As some of the forums said I tried running explorer in task manager . Please give me another solution for this.
Thank u

Hi Htj10,
Welcome to Lenovo Community Forums!
When you are in the Black screen with mouse situation, Try Pressing Windows key + R to open a run box
If that open type in msconfig and let me know if that pulled up the system configuration window.
You can follow this guide to run the system in a Clean Boot.
http://winaero.com/blog/how-to-perform-a-clean-boot-of-windows-8-and-windows-8-1-to-diagnose-issues/
Let me know if this works for you
Regards
Solid Cruver

C655D 5210 tosiba black screen with mouse pointer

I have only had this computer for 8 months. One day I turned it on, and windows kept restarting. After a few trouble shooting steps off the internet, I decided to reinstall windows 7 and lose my data and start all over. The first time it could not repair the computer and asked me to send the information to microsoft. Cannot boot in safe mode, I can get to the setup utility screen. This is a new Windows 7 cd. After several tries, it installed and said it had to restart, (this may happen several times) it only restarted once, then a black screen with a cursor. When I try to boot from the cd, the windows logo apppears, then a black screen with mouse pointer again. Toshiba is no help at all. This is my third Toshiba laptop. The first one did the same thing. But it was out of warranty, the amount they wanted to charge us, i just got another one. My mom's Toshiba just died with no real reason, the old one is in the garbage, and this one is only 8 months old. Toshiba would like us to send the computer in, pay for shipping, wait for 3 weeks, pay to ship it back to us, with a promise that it may not work.
Please help
here is the error message when trying to install windows 7
file:\Boot\BCD
Statu" 0xc000000f
An error occured while attempting to read the boot configuration.

Hi, last try is to install os manually, a clean os Install (way to go here)
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Tecra M2 - black screen with the cursor flashing

Hi guys,
Im hoping someone out there may be able to help me fix my laptop.
Ive read a couple of posts but not sure they can help me.
When I swicth on my Tecra M2, I just end up with a black screen with the cursor flashing in the top left or I get a screen filled with alternating 0's and 1's.
Sometimes the TOSHIBA splash screen appears with the boot options, other times it doesnt.
I cannot boot to CD and it wont boot to the HDD. Ive taken the HDD out and the CDROM out but it does the same thing which to me suggests that its not getting through the BIOS even as far as the boot sequence.
Does this sound like BIOS failure to you and do you know of a way to fix it? Ive tried taking the battery out, powering off and starting again but the same thing happens.
Any advice would be be appreicated.
Thanks,
Ross

I have had this twice now and in both cases it was caused by a faulty HDD - to confirm that the motherboard etc is still OK load the recovery CD in the DVD drive (or even better a freestanding XP disc), press F2 on startup and shift the cursor under the DVD drive as the boot drive.
If the motherboard etc is OK you will get the reload instructions (from the recovery disc) or a Windows install screens (from the XP install disc).
Satisfied that the machine at least works - replace the HDD and recover from the recovery disc or try a Windows repair from the recovery console (from the XP install disc with the HDD still in place).
In my cases I was forced to recover to a new HDD and then rebuild the machine from backups - I now clone the HDD when rebuilt.

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

[SOLVED] log into KDE given a blank black screen with mouse cursor

Similar Messages

Maybe you are looking for