[Solved] Menu Editor not loading.

I installed py solitaire, it didn't show up in the list. I tried to open up the menu editor, and that will not load either. I have fam and alacarte installed, and I am not sure what is wrong. Any help would be greatly appreciated.
Edit: alacarte will not run as a normal user, only as root. Is this normal?
Last edited by perlluver (2008-02-24 21:45:37)

perlluver wrote:
I installed py solitaire, it didn't show up in the list. I tried to open up the menu editor, and that will not load either. I have fam and alacarte installed, and I am not sure what is wrong. Any help would be greatly appreciated.
Edit: alacarte will not run as a normal user, only as root. Is this normal?
Ok I ran menu editor from the terminal and I got this message:
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications.menu': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/applications-merged': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings.menu': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/settings-merged': Permission denied
** (gmenu-simple-editor:7417): WARNING **: Failed to add monitor on '/home/perlluver/.config/menus/preferences-merged': Permission denied

Similar Messages

? Horizontal Menu Bar not loading in IE

Our horizontal menu bar does not load into IE. It works fine in Safari, Firefox and Chrome. It used to work on all four
browsers so I've gone back and uploaded an older version of our site to see if I could get it to work in IE. Even this older
site does not load anymore, also reloaded all our older Spry Assets and CSS.
The Website is www.sundogexpeditions.com
Thanks for any help and I'll provide any additional info to help diagnose my problem

We found the problem in the ul.MenuBarHorizontal li MenuBarItemIE . The display listed "none" We deleted it
and everything appears to display just fine in IE. Not sure if this was the best fix but it works for now.
Thanks

Adobe 5.0 editor not loading

We have been using Adobe Photoshop 5.0 for a while. Suddenly I can't open the editor. I get a pop up that says "COuld not load the FastCore Routines module because the file could not be found" or one that says "could not load the MMXCore Routines module because the file could not be found" or "COuld not load the Multiprocessor support module because the file could not be found". I have tried reloading the program. It will open in the organize and view mode but not the edit.
Thanks

You may need to find a system restore point; to a date when it was last working, unless you can identify the conflict with recent updates.
It’s almost certainly a system issue rather than an Adobe issue.

Overlay visible in Menu Editor, not in Simulate

Using DVD Studio Pro 4.03, I've built a menu with a .m2v background and a .psd overlay for my buttons. The menu appears correct in the Menu Editor ... both the .m2v background and the .psd overlay are visible. However when I try to Simulate the menu to check functionality, the overlay isn't visible ... if I click where they should by, the menu works as expected.
I tried doing a Build with the same results ... the overlay isn't visible.
I'm baffled. Any thoughts of something I'm missing?
Thanks,
David

I've tried .TIF and .PCT but both behaved exactly as the .PSD file. After selecting each as the overlay file, they were visible in the Menu Editor but disappeared when I go to the Simulate Menu.

[solved] TV card not loaded after upgrade to kmod

After the upgrade to mkinitcpio and kmod replacing module-init-tools, my TV card (Hauppauge WinTV Nova-S) is not loaded.
Downgrading mkinitcpio and re-installing module-init-tools and regenerating my initramfs and all is well.
Is there any extra setup needed with kmod? There are no man files in the kmod package so I'm at a loss what to do.
Incase it helps, here are (maybe not all) the modules related to my tv card when downgraded:
-->lsmod | grep dvb
cx88_dvb 23415 39
cx88_vp3054_i2c 1932 1 cx88_dvb
videobuf_dvb 4794 1 cx88_dvb
dvb_core 92868 2 cx88_dvb,videobuf_dvb
cx8802 13121 1 cx88_dvb
cx88xx 73365 4 cx88_dvb,cx88_alsa,cx8800,cx8802
videobuf_dma_sg 7936 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 15879 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
i2c_core 20492 15 isl6421,cx24123,wm8775,cx88_dvb,cx88_vp3054_i2c,cx8800,cx88xx,tveeprom,v4l2_common,videodev,i2c_piix4,nouveau,drm_kms_helper,drm,i2c_algo_bit
Last edited by fastfret79 (2012-01-10 22:29:35)

Yes - initramfs regenerated after each upgrade and downgrade.
Forgot to mention I was also suffering from the 'Filename too long' FS#27862 and your updated kmod in that bug's comments fixed that. I'm guessing that my issue is unrelated.
With both kmod packages, initramfs complains that /etc/modprobe.d/modprobe.conf doesn't exist, but I've never added anything in there anyway and the kmod package doesn't contain that file.
Last edited by fastfret79 (2012-01-10 11:53:07)

[Solved] Synaptics driver not loaded

Recently im getting
Couldn't find synaptics properties. No synaptics driver loaded?
when I run synclient
Touchpad still works but the synaptics driver is apparently not loaded. I have xf86-input-synaptics installed.
I can't figure out how to load the synaptics driver.
Last edited by Mythreya (2015-03-10 12:45:34)

This started after an update about a week ago. It was working perfectly fine with no effort before. I have an elantech touchpad.
$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=17 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ ASUS USB2.0 Webcam id=14 [slave keyboard (3)]
↳ Asus WMI hotkeys id=15 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=16 [slave keyboard (3)]
↳ USB Keyboard id=11 [slave keyboard (3)]
↳ USB Keyboard
I've mostly found ubuntu forums with the issue, they all linked to the debian wiki on synaptics which didn't help much. Even the allmighty archwiki had no troubleshooting instructions for synaptics.
Last edited by Mythreya (2015-03-06 18:12:37)

BC IN-Browser Editor not loading pages for editing.

Hi,
From Bc admin I click the edit button to open in browser editing.
The editor opens and the index page loads and is editable.
When I click the link to the about page (example) or any other page the page loads fine but none of the editable regions are visible.
If I look in my browser address bar I see that although I am viewing the about page the address is still showing the index page. If I manually update this to about.html the browser then navigates to the about page and I am able to use the in browser editing options.
I have another site in BC whiere the in browser editing works fine, each page is editable from clicking the menu link. So I feel this is an issue parculiar to this site but I cant see the difference between the two sites that could be causing the one to have this issue.
Any help would be greatly appreciated.
Cheers Cas

Hi Aish,
Thank you for your reply. I'm not using muse on the sites I mentioned though I have used it on another site and am not experiencing any issues with the In-Browser editing.
The issue is as mentioned in the thread you pointed me to, the browser address remains the same from page to page but if I update it manually I can then edit it.
I had read the thread but sadly there is no solution offered in it.
Thanks again
Cas

Photoshop Elements 13 Editor not loading

I have downloaded and installed Elements 13, and imported images into the organiser. When I try to load the editor, the message displays that it's loading, but does not go further than this.

Try shikha's solution in this thread:
Elements 12 - not working

Editor not loading

This is my first time on the forums. I cannot load Editor on Photoshop 7. Is there a reason?
Charlie 1924

Try the below
Navigate to the folder containing the TWAIN plug-in:
If you are using Mac OS:
Navigate in Finder to /Applications/Adobe Photoshop Elements 8/Plug-Ins/ImportModules/.
If you are using a 32-bit edition of Windows:
Navigate to C:\Program Files\Adobe\Photoshop Elements [Version]\Locales\en_US\Plug-Ins\Import-Export\ .
If you are using a 64-bit edition of Windows:
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements [Version]\Locales\en_US\Plug-Ins\Import-Export\.
Note: If you don't know which edition of Windows you have, see Determine whether your computer is running a 32-bit or a 64-bit edition of Windows (kb407673).
Rename TWAIN.plugin to ~TWAIN.plugin (Mac OS) or rename Twain_32.8BA to~Twain_32.8BA. (In Windows, it's possible the file doesn't have the filename extension .8BA.)

Portal menu items not loading

Hi,
for some reason, on my browser most of the portal menu items don't load properly. This happens on the detailed navigation when I expand any folder that contains iView links. I see the message loading... but nothing happens.
Some of the iviews don't load either. I see a flash message on the statu bar at the bottom that says 'error on the page' and then 'done'. I'm sure this is a IE issue since it works just fine on a different computer for the same portal. What could be wrong with my browser ? Any help would be greatly appreciated.
Sudheer

Hi Anand,
You need to make host entry for IP add (URL IP add. of Porta) in host file.
To add host entry go to run from start and type drivers it will open new window, click on etc folder,new open host file in notepad or any other word editor, there you will find default host entry for localhost, below this add your entry, e.g.
127.0.0.1 localhost
<IP add> <host name>, where host name will be your company name or any thing.
While opening Portal use host name instead of IP in URL
Thanks
Sandy

[SOLVED] Awesome's not loading

I did some updates and now I awesome won't start, giving this output instead
awesome: error while loading shared libraries: libev.so.3: cannot open shared object file: No such file or directory
After a bit of googling I found this to be a pretty common error, which just requires to recompile awesome, so I reinstalled awesome from the AUR. Since that didn't solve the problem, I tried getting rid of libev and insalling awesome. It installed just fine, but I still got the same error. I also tried awesome-git but with the same result.
I guess I'm doing something wrong since this is fixed for most people by just compiling awesome again but after a few hours of tinkering I don't seem to find what it is.
Any help would be greatly appreciated.
Last edited by Macdelaney (2010-12-17 04:13:05)

First of all thanks for your reply.
I do have Libev 4.01-1 and it-s in /usr/lib/libev.so.4 too.
I've removed awesome with yaourt -Rns, then cleared the cache from not installed packaged, and installed awesome again. I repeated this for awesome-git just in case, but the same thing happens. I downloaded the package from the AUR manually and then installed, again, same thing happens.
I must be missing something stupidly obvious, but I can't put my finger in it.
Again, any help would be greatly appreciated.
EDIT: A simple whereis awesome showed that /usr/local/bin/awesome existed, apparently I did this at some point (don't really remember). Running /usr/bin/awesome everything works great.
So yes, pretty stupid on my part!
Last edited by Macdelaney (2010-12-17 04:12:38)

[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio

EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)

Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time:

[SOLVED] ALSA firmware not loading properly with kernel 3.8.6-1

Hi All,
I have a E-MU 1820 card + breakout box that have been working beautiful under Archlinux for years but now something happen.
It still work OK under windows (dual boot same computer).
Normally during boot all indicators on the breakout box blink and then only thin show is clock setting indicator. But now all the indicators still blink but instead it is a -12 dB indicator that light up and not the clock settings and no sound.
dmesg show following.
[christer@Arch ~]$ dmesg | grep emu
[ 5.269612] emu1010: Special config.
[ 5.269731] emu1010: EMU_HANA_ID = 0x7f
[ 5.274685] emu1010: firmware file = emu/hana.fw, size = 0x133a4
[ 13.465727] emu1010: Hana Firmware loaded
[ 13.465776] emu1010: Hana version: 3.4
[ 13.465864] emu1010: Card options = 0x0
[ 13.465888] emu1010: Card options = 0x0
[ 13.466379] emu1010: Card options3 = 0x0
[ 14.486723] emu1010: Loading Audio Dock Firmware
[ 16.477785] emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x36
[ 16.477809] emu1010: EMU_HANA+DOCK_ID = 0x55
[ 16.477809] emu1010: Audio Dock Firmware loaded
[christer@Arch ~]$
aplay -l looks like it did before.
[christer@Arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
[christer@Arch ~]$
lsmod
[christer@Arch ~]$ lsmod | grep emu
snd_emu10k1 140245 1
snd_util_mem 2403 1 snd_emu10k1
snd_hwdep 6428 1 snd_emu10k1
snd_ac97_codec 113456 1 snd_emu10k1
snd_rawmidi 18831 1 snd_emu10k1
snd_seq_device 5268 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 78146 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7426 2 snd_pcm,snd_emu10k1
snd_timer 18934 3 snd_pcm,snd_seq,snd_emu10k1
snd 60156 13 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
[christer@Arch ~]$
From what I can see all looks OK, like it did when it worked, but something is not at it should.
Any thoughts or ideas about what might have happen or how to progress in troubleshooting.
All input most welcome.
I found info describing problem with firmware loading, but it is over my head.
http://git.kernel.org/cgit/linux/kernel … 54cf7008ab
Output from Aadebug ( http://alsa.opensrc.org/Aadebug )
[christer@Arch ~]$ ./alsadebug
ALSA Audio Debug v0.2.0 - Fri Apr 12 20:46:05 CEST 2013
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt
Kernel ----------------------------------------------------
Linux Arch 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.8.6-1-ARCH.
Loaded Modules --------------------------------------------
snd_emu10k1 139271 2
snd_util_mem 2339 1 snd_emu10k1
snd_hwdep 6364 1 snd_emu10k1
snd_pcm_oss 38511 0
snd_mixer_oss 14995 1 snd_pcm_oss
snd_ac97_codec 112216 1 snd_emu10k1
snd_seq_dummy 1463 0
snd_seq_oss 29098 0
snd_seq_midi_event 5660 1 snd_seq_oss
snd_rawmidi 18742 1 snd_emu10k1
snd_seq 49946 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5180 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 76956 4 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7298 2 snd_pcm,snd_emu10k1
snd_timer 18687 3 snd_pcm,snd_seq,snd_emu10k1
snd 58893 14 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
Proc Asound -----------------------------------------------
0 [EMU1010 ]: Audigy2 - E-mu 1010 [MAEM8810]
E-mu 1010 [MAEM8810] (rev.3, serial:0x40011102) at 0xd000, irq 19
1: : sequencer
2: [ 0- 0]: hardware dependent
3: [ 0- 1]: raw midi
4: [ 0- 0]: raw midi
5: [ 0- 3]: digital audio playback
6: [ 0- 2]: digital audio playback
7: [ 0- 2]: digital audio capture
8: [ 0- 1]: digital audio capture
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0] : control
33: : timer
00-00: EMU10K1 (FX8010)
00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
00-01: emu10k1 mic : Mic Capture : capture 1
00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
00-03: emu10k1 : Multichannel Playback : playback 1
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Connecting To: 15:0
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Client 15 : "OSS sequencer" [Kernel]
Port 0 : "Receiver" (-we-)
Connected From: 0:1
Client 16 : "E-mu 1010 [MAEM8810]" [Kernel]
Port 0 : "Audigy MPU-401 (UART)" (RWeX)
Port 32 : "Audigy MPU-401 #2" (RWeX)
Client 17 : "Emu10k1 WaveTable" [Kernel]
Port 0 : "Emu10k1 Port 0" (-We-)
Port 1 : "Emu10k1 Port 1" (-We-)
Port 2 : "Emu10k1 Port 2" (-We-)
Port 3 : "Emu10k1 Port 3" (-We-)
Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x 2 root root 60 Apr 12 20:42 by-path
crw-rw----+ 1 root audio 116, 11 Apr 12 20:42 controlC0
crw-rw----+ 1 root audio 116, 2 Apr 12 20:42 hwC0D0
crw-rw----+ 1 root audio 116, 12 Apr 12 20:46 hwC0D2
crw-rw----+ 1 root audio 116, 4 Apr 12 20:42 midiC0D0
crw-rw----+ 1 root audio 116, 3 Apr 12 20:42 midiC0D1
crw-rw----+ 1 root audio 116, 13 Apr 12 20:46 midiC0D2
crw-rw----+ 1 root audio 116, 14 Apr 12 20:46 midiC0D3
crw-rw----+ 1 root audio 116, 10 Apr 12 20:42 pcmC0D0c
crw-rw----+ 1 root audio 116, 9 Apr 12 20:43 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Apr 12 20:42 pcmC0D1c
crw-rw----+ 1 root audio 116, 7 Apr 12 20:42 pcmC0D2c
crw-rw----+ 1 root audio 116, 6 Apr 12 20:42 pcmC0D2p
crw-rw----+ 1 root audio 116, 5 Apr 12 20:42 pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 12 20:42 seq
crw-rw----+ 1 root audio 116, 33 Apr 12 20:42 timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
RAM -------------------------------------------------------
MemTotal: 4051696 kB
SwapTotal: 51196 kB
Hardware --------------------------------------------------
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
05:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Interupts -------------------------------------------------
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
6: 1 2 IO-APIC-edge floppy
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 1 IO-APIC-edge i8042
16: 529 493 IO-APIC-fasteoi uhci_hcd:usb1, pata_jmicron, nvidia
18: 10654 10645 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb8, firewire_ohci, i801_smbus
19: 3621 3626 IO-APIC-fasteoi uhci_hcd:usb7, snd_emu10k1
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb5, uhci_hcd:usb6
44: 7637 7652 PCI-MSI-edge ahci
45: 11719 11736 PCI-MSI-edge eth0
NMI: 47 47 Non-maskable interrupts
LOC: 49551 45081 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 47 47 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28730 28313 Rescheduling interrupts
CAL: 94 54 Function call interrupts
TLB: 3503 3509 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
[christer@Arch ~]$
output from systemctl show somw inacive sound related sevices.
alsa-restore.service loaded inactive dead Restore Sound Card State
alsa-store.service loaded inactive dead Store Sound Card State
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
dmeventd.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
lvmetad.service loaded inactive dead LVM2 metadata daemon
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local-shutdown.service loaded inactive dead /etc/rc.local.shutdown Compatibility
rescue.service loaded inactive dead Rescue Shell
systemd-...console.service loaded inactive dead Dispatch Password Requests to Console
systemd-...rd-wall.service loaded inactive dead Forward Password Requests to Wall
systemd-fsck-root.service loaded inactive dead File System Check on Root Device
systemd-...e8ee844.service loaded inactive dead File System Check on /dev/disk/by-uuid/9751ee37-e769-4bbe-9436-2d8e5e8ee844
systemd-...ev-sda2.service loaded inactive dead File System Check on /dev/sda2
systemd-...ev-sda4.service loaded inactive dead File System Check on /dev/sda4
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
systemd-...l-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
systemd-...ed-load.service loaded inactive dead Load Random Seed
systemd-...ed-save.service loaded inactive dead Save Random Seed
systemd-...ad-done.service loaded inactive dead Stop Read-Ahead Data Collection
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-...s-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-...unlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-...hutdown.service loaded inactive dead Update UTMP about System Shutdown
ypbind.service error inactive dead ypbind.service
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs-setup.target error inactive dead remote-fs-setup.target
rescue.target loaded inactive dead Rescue Mode
runlevel1.target error inactive dead runlevel1.target
runlevel2.target error inactive dead runlevel2.target
runlevel3.target error inactive dead runlevel3.target
runlevel4.target error inactive dead runlevel4.target
runlevel5.target error inactive dead runlevel5.target
shutdown.target loaded inactive dead Shutdown
syslog.target error inactive dead syslog.target
umount.target loaded inactive dead Unmount All Filesystems
All the best!
Christer
Last edited by agkbill (2013-04-15 18:41:03)

Thank you mich41!
It looks like a kernel bug.
I downgraded to 3.7.10-1 then firmware loaded OK and I could play sounds.
Upgraded to 3.8.6-1 then the firmware fail to load.
Something looks not ok with 3.8.6-1.
Best regards,
Christer

Sudden finder freezing. menu icons not loading. slow performance

Please help. My Powerbook has suddenly started acting strangely. After restarting the menu bar icons take around 5 minutes to load up. The airport cannot pick up any signals. The compiuter has no startup sound. The computer tends to freeze from the finder forcing a hard restart. I would like to re-install the system or run a diagnostic but am overseas without the disks. Have zapped PRAM and fixed privelages, trashed pref files. nothing.
Hoping I can get someone with some idea? i've run out.
thanks
B

If the machine has always taken 12 minutes to start up, since it came out of the box, then it was and is defective. There's nothing to do in that case but to take it in for service.

[solved] aesni_intel module not loaded since switch to kmod

Since installing kmod-4-1 as replacement for module-init-tools the AES-NI instruction optimized crypto modules (aesni_intel) don't get loaded automatically anymore.
CPU is a SandyBridge Core-i5 2500K; aes-x86_64 isn't loaded anymore either. The CPU definitely supports AES-NI.
Is this a problem or am I supposed to write those modules down by hand in rc.conf MODULES section?
Kind regards
lynix
Last edited by lynix (2012-02-01 20:57:25)

Nevermind. I found the bug -- I'll make sure this is fixed for kmod5.
tech note for those interested:
A module alias can resolve to many modules -- in this case, the alias 'aes' resolves to "aes_generic", "padlock_aes", "aesni_intel", and "aes_x86_64". modprobe, including the library equivalent, should insist on trying to insert all of these. kmod does, but it makes the mistake of quitting if one of them errors out. To wit:
with module-init-tools:
# modprobe -v aes
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
WARNING: Error inserting padlock_aes (/lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz): No such device
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/cryptd.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aes-x86_64.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz
WARNING: Error inserting aesni_intel (/lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz): No such device
with kmod:
# modprobe -v aes
insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
ERROR: could not insert 'padlock_aes': No such device
Last edited by falconindy (2012-02-01 20:54:47)

[Solved] Menu Editor not loading.

Similar Messages

Maybe you are looking for