Solved my freezing video problem

It turns out that my iPod doesn't like to have its files managed manually. I had been having this freezing video(any video) problem for several months. I was at my wits end after trying numberous restores, all of the 'R's, and any other trick from the forum. I just decided to try disabling the manual file management and this seems to have done the trick. No more freezes at all. So, for me, manual file management isn't an option.
60 gig 5G Windows XP
Windows XP

Quote
Does that mean somewhere there is a problem starting my pc up from "coldstate".
Looks like it. The memory does not seem to be the problem (two different kits @DDR2-800 and the same results).
Quote
Is there no diagnostic test you can get for ur psu?
Good Diagnostic Equipment to really test a PSU will probably be more expensive than buying a new one.
Quote
If it was my psu, wouldnt my pc not boot at all, instead of booting and showing red LED's?
It is usually not the whole PSU that breakes down. One component inside the PSU can be problematic causing (as an example) a problem on the +5V circuit. The result is that another part of the mainboard does not get enough power to work properly which then causes a chain of other problems (system shutdown/reboot).
Is is hard to find such causes without testing all the components involved systematically (by replacing one by one for testing). I am not saying that it is definately the PSU (it could as well be the mainboard, or some component on it, your video card, your processor or even a drive causing this.

Similar Messages

[Solved][GRUB/ATI] Video problem

Hi all.
I have a Radeon HD 6670 (Turks XT/r600)
When I boot arch linux live from USB everythink works ok.
But after install I have no video.
System boots > shows grub > shows systemd things > screen blinks and all black.
After some self research, I found "gfxpayload=keep" on grub parameters and change it to "gfxpayload=disable", then F10 and everything works great (video/X/VDPAU/3D...)
Why it hapens and how can I permanently set this disable on grub?
[EDIT]
Some PC, some instalation, with on board HD4250 (RS880G) video works with gfxpayload=$ANYTHING
[EDIT 2]
You can change gfxpayload on /etc/default/grub
Last edited by souenzzo (2014-08-30 13:39:02)

souenzzo wrote:You can change gfxpayload on /etc/default/grub
After which you run '# grub-mkconfig -o /boot/grub/grub.cfg' and the changes are saved.
https://www.gnu.org/software/grub/manua … yload.html
Should you consider this issue solved, then please mark the thread as such.

[SOLVED]Video problems and more

Some months ago, I posted about my video problems in trying to install Arch on several different computers. Getting no good results I gave up, but recently made another attempt. Right now, I have Arch installed on my test computer which is a MSI Celeron, with onboard S3 ProSavage video, one monitor. I do not use a desktop, only the JWM window manager, no icons, wallpaper or any other crap. Here, Arch is great. Ultimately, I want to get Arch set up on my workhorse which is an Asus P4, with no onboard video using dual monitors. I might add that this ASUS board, with two old nVidia cards, AGP and PCI ran dual monitors with FreeBsd and Debian.
Herein lies the problem:
I want Arch NOT to mess with the video until I start xorg regardless of whatever AGP and PSI card I might be using. Please stick with the BIOS resolution. This is how it was with every other linux I have installed. I have tried several video cards, AGP nVidia, ATI, and Matrox, as well as PCI nVidia and ATI, all with different results. Using most of the cards, I get a console (no, haven't messed with xorg yet) that appears in the upper left corner so small I can't read it. Or else, there's a white square that obliterates the upper left of the console, The only time this doesn't happen is if i use the matrox AGP card or an ATI PCI card not in conjunction with another card.
I read to use the vga=xxx in the grub menu list as well as kernel boot option set to nomodset, but either I don't know how to do this, or else it doesn't work for me. What is KMS, and how to use it?
I want to resolve this issue before attempting to get dual monitors set up on the Asus board. Any help is appreciated
Last edited by Ron74 (2011-03-18 16:17:45)

bohoomil wrote:
Ron74 wrote: What is KMS, and how to use it?
KMS
I don't quite get it: does the picture get messed up as you described after the kernel loads? Do you have normal BIOS logo / text before the bootloader starts?
As Arch takes over the boot process, the resolution becomes somewhat higher, and then when comes the logon screen it's so small, in the upper left, that I can hardly read it. This problem is well documented on the search engines. I have read where some users want a higher console resolution, and others want a lower resolution. I have installed Slack, FreeBSD, Debian, TinyCore and others, without this problem. Apparently, Arch is deciding what screen resolution a user should have in the console. This would be more understandable were it not that there is no consistancy between various video cards. Yes, I'm guessing that this happens after the kernel loads. But how come the discrepancy between different video cards?

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

HT3964 For the past several months my MacBook Pro has been shutting down. I get horrible video with marks and striations acress the laptop screen and an additional monitor and the weird video problems until the multilingual notice comes up saying to shut

I used two monitors, and several months ago the MacBook Pro started crashing frequently. It seems like it might be overheating. Sometimes the disks seems to race. I leave the computer on most of the time and it sleeps when I am away, but when I come back in the morning it will have colored striations across both screens, and soon the multilingual announcement comes up that I have to press and hold down the power key.
Also, when using a progam like Skype video, the video goes insane frequently, with Skype windows freezing, video freezing, Skype window cutting in half, and eventually the computer crashing.
It seems to be a video problem.
What do I do?

I would take some screen shots of the anomalies and take the MBP to an Apple store genius bar. I you cannot reproduce the display problems, the screen shots will at least give them a start point for an analysis.
Ciao.

Apple aware of video problem in the new Intel iMacs

Macworld Daily News
Thursday - February 09, 2006
Apple investigates Intel iMac Front Row problems
By Macworld staff
Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs.
Recent reports claimed that some users had experienced random horizontal lines and other video playback problems when playing video in Front Row.
"Apple is aware of this issue and is looking into it," the company said in an email to a web-based pressure group that has been gathering information on the problem. "If a customer has any technical issues, they should contact AppleCare."
The problem is allegedly software-based.

"Sure, I'd be more understanding had it been an issue that required a very special set of conditions to trigger"
Apparently it does as this issue is not affecting all users.
"As I was told, affected owners would not be proactively notified"
Where you you prefer them to use their limited resources, trying to figure out who MAY be affected and sending them some sort of detailed action plan, or spending the resources determining the cause of the issue and developing a solution that can be distributed to the ones who need it not only now, but those that may discover the issue next week?
I can understand that you are frustrated, and don't blame you for feeling that way, but this is an all new piece of technology and bugs are going to come up that were missed in testing. No company can afford to test at a 100% level. To do so would drive the costs so high as to make it impossible to sell the product, especially to the market the iMac is aimed at. Apple has a pretty darned good track record of resolving issues quickly when they appear. Until they do you only have a few choices. Use the workaround until the solution appears, waste time complaining about it, or sell the iMac and purchase a different product. That's really about all you can do!
It was good of you to spend your valuable time, and yes it is valuable, trying to help the engineers or service reps solve the issue. That they spent that much time with you should show their commitment to solving this issue.
Be patient, give them a chance, they have not had long to try and figure this out.

Video Problems with 7.0.1

Just as with iTunes 7 I am having video problems galore. I can play all the music videos and TV shows that I currently have in my iTunes library via QuickTime. However, if I attempt to go and browse either music videos or TV shows, iTunes comes to a dead halt and I cannot even close the iTunes program without utilizing ALT, CTRL, DEL. My computer is "authorized" as I have no problem browsing in music, but if I do get as far as the TV Show home page, I get a message saying that I "CANNOT BROWSE ALBUM COVERS ON THIS COMPUTER." I am really at a loss as to what else to try and would apprecaite any assistance offered. Thanks all.

b noir, here are all the symptoms that I am currently experiencing with 7.0.1:
1. iTunes takes 3-5 minutes to boot-up and will ONLY start if an iPod is attached. Manual opening will not work.
2. Any time that I click on the "TV Shows, Music Video, or Movie" areas of iTunes Music Store the entire iTunes program freezes. I can only exit iTunes at that point by "ALT, CTRL, DEL."
3. When I do attempt to enter the TV Show area, I do eventually get a gray and white sign where the TV Show icons should be and the message says "Unauthorized to browse album covers on this computer." At this point the program is frozen. I should mention that the computer is authorized and I have NO problem browsing, playing, or purchasing music in the iTunes Music Store.
4. I have no problem whatsoever playing the music videos and TV Shows that are already a part of my iTunes Library. No issues with QuickTime's playback whatsoever.
5. There is absolutely no problem with the purchasing, playing, or control of my music portion of iTunes. I have no distortions at all and did not have them with 7.0.
6. Many times after updatingmy iPod with new music, changes, or playlists, the window of the iTunes player will say that the update is complete but does not mention anything about the iPod being OK to disconnect. Several times I tried to manually disengage by clicking the release next to the iPod in the source column, only to get a message telling me that iPods files are currently in use. Eventually I can make the disconnect.
7. In general the amount of time that it takes to sync my iPod to iTunes is at least triple what it was with iTunes version 6.
Whew. That's everything. What say ye?

Ibook video problems

I have a second gerneration g3 12 inch and i'm haveing video problems. The ibook boots up and the screen shows 3/4 and the screen shows flashing like orange and blue pictures. I've read that it proble a video ard problem or a cpu problem and i don't know how to solve it.

It's either a video card problem or a problem with the screen cable. I've know such description to be the video cable. There are two way to fix this issue, you could pay for a technician from a shop to replace the cable or logic board (video card is built into the logic board) Or if your confidant enough, you can obtain most of the parts from eBay cheaper enough and replace yourself. Check out ifix web site for iBook repair manual.

Video problems in 6368 V5 Pentium4

Hello.
I have video problems with the 6368 V5 with a P4 proccessor and the on board video card.
I just upgraded the Bios, but the problem persits.
I try with a PCI video card, and works well. But the on board video, the image is bad and windows have a lot of Page Fault errors.
What can I do to solve this problem?
Thanks,
Andres.-

Are you using any P3 Socket 370 convertor to P4 Socket 478? Your board only supports up to P3 and Celeron Tualatin processors!
All the Best... :D!!!

Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

Thumbnails do not show up after importing clips into Premiere Elements 12 Organizer. I've tried right clicking on a clip and telling it to recreate the thumbnail but it doesn't work. I've tried refreshing and repairing the catalog. I've even started a new catalog and reimported the files. The system says it's creating thumbnails but they still do not show up. Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

listiak
That is one of those questions best answered by evaluating Elements Organizer13 with your specific files in your specific computer environment.
Each of the Elements Organizer versions often appears to carry along its own baggage.
One of the things that came up about Elements Organizer 13 thumbnails recently was a problem with files with MPEG2
video compression. The Adobe word on this was that this is only an Elements Organizer 13 tryout issue...supposed not to exist
in the purchased version.
ATR

Post-Update Video Problems

Ever since installing Leopard update 10.5.2, and the subsequent Leopard Graphics Update 1.0, I've been experiencing an assortment of video problems that were not present prior to installing the updates. These problems include: horizontal black lines through windows in the display, colored blocks in the display, icons in the dock having various kinds of corruption, including garbled lines or superimposed or 1/2 & 1/2 icons, as well as all kinds of flashing and garbled screen display in games. The worst of these problems, which has been occurring several times a day, is total screen lock-up. The application behind the screen may well still be running, but the video is locked tight. The only way out of this situation is a hard re-boot with the power button.
If a fix isn't imminent, is there any way to UNINSTALL the video upgrade?
Thanks.
Robin

iv had a problem sort of like this, when i had my computer started up on the disk and repaired disk/permissions, the image would freeze on the screen, only when i moved the window did it correct itself

Mini DVI to VGA Adapter Video Problem

This year at Randolph-Macon College we replaced the Math lab Emac computers with IMac G5 Intel machines. The laboratory has an NEC model MT1050 projector with a manufacturer’s date of August 2002. We can not seem to get rid of ever present scan lines. We can slow them down and speed them up by adjusting resolution and refresh rates, but nothing will remove them. We are connecting the IMac to the projector via the Apple Mini-DVI to VGA Adapter. It is specifically designed for use with the iMac (Intel Core Duo), and the adapter connects to the Mini-DVI port of the computer and the VGA end of the adapter to an external VGA monitor or projector.
Troubleshooting the problem we have swapped IMac Intel computers with no luck, but we still have to use the Apple Mini-DVI to VGA Adapter. When we hook the projector to a Intel Mac Book Pro, we have to use a different adapter, but then it works perfectly. In fact, everything we try using other adapters works fine, it’s just when we use the Apple Mini-DVI to VGA Adapter that we experience the video problem.
Has anyone experienced this problem and if so, have you been able to remedy it?
iMac (Intel Core Duo) Mac OS X (10.4.8)

I don't have much to suggest, except to ask if you can try with a different mini-DVI to VGA adapter. (i.e. do you have more than one on hand to make sure yours isn't just defective?) Make sure it is firmly seated into the iMac.
I use the same adapter to provide an extended desktop on an old CRT monitor and the display is great.

T400 - Video problems and a long wait for repair...

Hi,
I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400. Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
All was well until February 1st, 2010, when the LCD sudden wouldn't work. Well, it would work, but the screen was very very dim, even with the display maxed out on brightness. You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable. However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way. When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU. Based on this, I figured it must be a video card or LCD issue, or a combination of both.
So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre. Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close. Not quite. So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot. And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box. That's fast service! Pleased, I put my T400 in according to instructions, and I sent it off.
Fast forward to about mid-February. I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
Fast forward to March 1st. I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
Fast forward to March 8th, still no computer. I talk to another Lenovo CS rep... strange, there's no update. The issue gets escalated to the Depot managers.
Fast forward to March 12th. Still no word on my T400's status. An email fron CS has been sent to the depot. Not even the CS reps know what's going on. The rep I talk to figures there should be a response by the end of the day.
Fast forward to today, March 13th, 4:50pm Pacific Time. I just finish talking to Lenovo CS, there's been no response from the depot. Apparently there's a part that they're waiting on for repairs, but there's no ETA on it. Is it the same part that I've waiting on all this time? Is it a new one? I don't know.
At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern. I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself. But the bottom line remains: my computer's not back to me.
So, my questions to the community here: is my experience here typical? Is there any hope of my seeing my computer back, or even at least just the hard drive? I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use. However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March. I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
If you're reading this, I'll let you judge my experience for youself. I'll update my case as it progresses.
Thanks!
Moderator edit: Removed support contact private information, per the Community Rules.

Hi all,
So, an update with some good news: my computer is finally back!
After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter. BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th). That's fast service, once repaired!
However, my case spans over 4 screens of updates and repair depot orders of parts.
Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
The story doesn't end here, however:
In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had. And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax. This is a sale price, compared to the regular retail of $129. Unfortunately, they can't sell me just one month.
At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty. I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher. Two months though.... My request for a warranty extension is being considered by the manager it was escalated to.
So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs? I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too). My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
Thanks for sticking with me through the drama!

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

Why does a Safe Boot fix my video problem?

After visiting my local Genius Bar twice (and getting two different answers), I erased and reinstalled Snow Leopard 10.6 on my late-2006 "white plastic" iMac.
I reinstalled the version of SL that came with the iMac, then upgraded it twice to OS 10.6.8. Software Updater says all of my OS components are up-to-date.
My video-corruption problems ("ghosting", "tearing", pixelation of icon, then the kernel CRASHES within 20 minutes) appear when I boot normally. But they permanently disappear when I reboot into the Safe Mode!
I've search Apple.com and every other site I can find without a clear answer to this:
What extensions, StartUp items, software daemons or gremlins DO NOT load in Safe Mode? Shouldn't one of them be the cause of my problem? Or does Safe Boot work on a hardware-level, too?
This happens on ALL accounts, both Admin and regular users. No external devices are connected except the wired mouse and wired keyboard.
I've zapped the PRAM three times, and I've unplugged it for hours. Disk Utility shows everything is good, too. There's about 50 gigs left on the internal 750 GB hard drive.
The so-called "Geniuses" both ran their Triage OS off an external drive and my iMac hardware passed ALL of their tests. One said it just needed a reinstall (a free fix!!), and the other said my video card is bad ($800, and I have to use an outside repair shop).
Can someone give me an idea how to proceed? I've been working in Safe Mode for days, but that prevents me from using: Sound, my home network, fonts, Preview, editing in iPhoto, etc.
Thanks.
Specs:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Purchase Date: March 2007

Hi, Mike,
Thanks for the quick reply.
I read the linked post about QE, but I don't see how it could help me troubleshoot my problem. Could you clarify: is QE a piece of "software" (that is, a file -- like an extension)?
If QE IS a piece of software that is disabled in a Safe Boot, I should be able to move it to my Desktop and restart. If my video problem is eliminated, the QE software is the problem, right?
But then, if my problem is caused by a file/extension, why would the problem occur (and be eliminated in a Safe Boot) right after I re-installed the OS? Shouldn't all the System software be pristine right after re-installation? But since it's NOT fixed by the re-installation, it seems like a hardware problem -- like the expensive video card. That's what's confusing me.
So, I'm proceeding as if the problem is caused by a file being loaded into memory and I'm trying to disable the items that don't load in Safe Boot Mode one-at-a-time. I just need a specific list of what those items are (and their locations on my hard drive).
In OS/9, I used Conflict Catcher to do this automatically, but I haven't found an OSX app to do the same. So I'm trying to do it manually.
Please excuse my layman's terms. Any help is appreciated.

Solved my freezing video problem

Similar Messages

Maybe you are looking for