[Solved] Pacman.log no longer logging maybe systemd

Hi, I upgraded a couple of days ago on the 11th to systemd system, I am using 86_64 awesome DE, I ran Syu yesterday and this morning I found mplayer was acting poorly so I went to check pacman.log to see what was updated. Pacman.log hadn't logged since the 11th when I upgraded, although I would like to figure out mplayer, I am more interested in the log files. I also found that my boot log file is not recording boot information from the same time although the errors.log has information in it.
thanks in advance for any help you may give.
--jerry
Last edited by jk121960 (2012-11-14 21:15:45)

bernarcher wrote:
To be more precise, did you follow this: Journald in conjunction with syslog
pacman.log is working here.
Yes and here is the status
syslog-ng.service - System Logger Daemon
Loaded: loaded (/usr/lib/systemd/system/syslog-ng.service; enabled)
Active: active (running) since Wed, 2012-11-14 00:58:57 CST; 14h ago
Docs: man:syslog-ng(8)
Main PID: 591 (syslog-ng)
CGroup: name=systemd:/system/syslog-ng.service
└ 591 /usr/sbin/syslog-ng -F
thanks for your help
--jerry

Similar Messages

[SOLVED] pacman -Syu on 10/17/2012, systemd can't load kernel modules

Ok, I did a [pacman -Syu] on my laptop, and everything went well. So I decided to upgrade my PC as well, did a reboot and then couldn't ssh into it.
Had to access the machine, and found
# systemctl --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
[email protected] loaded failed failed dhcpcd on eth0
httpd.service loaded failed failed Apache Web Server
systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
3 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
so it failed to load kernel modules...
# systemctl status systemd-modules-load.service
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Wed, 17 Oct 2012 18:27:11 -0400; 45min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 102 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-modules-load.service
Oct 17 18:27:11 MyHost systemd[1]: Failed to start Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
... then I checked network devices
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# ip addr show dev eth0
Device "eth0" does not exist.
... then the modules; and I saw that none appeared for the Ethernet...
# lspci -v | grep Ethernet -A8
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fc00 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
... whereas they did for other devices
# lspci -v | grep Kernel
Kernel driver in use: ohci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: sata_nv
Kernel driver in use: sata_nv
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: nouveau
I'm guessing it's probably something with the new image after the pgrade, but I don't know which module to load nor do I
understand why systemd isn't loading the modules when it was working stable enough to act as a headless server before. However, I've only been a week or so with systemd and might have overlooked something in the configs. Any help or insight would be greatly appreciated. Please. I'm desperate.
Last edited by confusion-is-my-sedative (2012-10-26 21:30:01)

Yep, I got that far, and tried the same advice from a different user with a 'tee' command which did the same thing, but unfortunately the forcedeth module can't be loaded because its in a different directory than the 'uname -r' specification allows modprobe to search for. I posted my attempts here: https://bbs.archlinux.org/viewtopic.php?pid=1181940

Call log no longer displaying any calls

Using Pearl and the call log no longer will display any of the calls that I have made, received or missed. The settings in the Menu options are set to list all missed calls, but none have been appearing for two days now. Any thoughts or fixes or is this a known issue with no resolution?
Solved!
Go to Solution.

You're facing memory constraints in your device. Due to which MMS
are being received in your device but for low memory they were deleted
you even see them.
Perform the following steps -
Give a soft reset by removing the battery for 30sec.
Check how much memory is free in your device to Options -> Status -> Free Memory. To view all the database size go to Option -> Status -> click Menu button then select Database Sizes
Delete less frequently used application. To delete go to Options -> Advanced Options -> Applications -> highlight the application you want to delete -> click Menu and select Delete
If you stored your picture in device memory them move them to your media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After recent OS update (10.8.2) I can no longer log into icloud.

After recent OS update (10.8.2) I can no longer log into icloud. I've reset password, but when I try to login on the icloud preferences panel it gives a little "bonk" sound and then spins forever. Open to suggestion. Thanks!

Signing out and signing back in seemed to do the trick as suggested here: https://discussions.apple.com/message/19827058#19827058

"You are no longer logged into your profile" - So....Palm just decides to delete my data???

I was told to post this over in this Palm forum also so hopefully SOMEONE from Palm/HP will address this... I could not find a bug report area but perhaps someone can log this.
So after months of (mostly) happily using a Pre Plus, Wednesday I get the message that I am no longer logged into my profile, and do I want to reboot or erase my data??!! I googled, and yup, it's an issue....So I reboot...same options, this reboot, it starts and asks me if I want English as my language. Woops!!! No data!
Now of course palm profile does not backup anything on my phone really....I sync direct to Exhange and use Chapura sync to a desktop Outlook PST file. So I spend the next 5 hours restoring and syncing. Just crazy. Why can't it just say that you are not currently logged in, we will try again in an hour?? And what right does palm have to delete MY data that the profile does not even backup??? My exchange and chapura sync'ed data? Sure, I can re-sync with both of those. But my Chapura only if I am on the same wi-fi network as the local PC. So what does that mean if I am traveling? And re-syncing a huge volume of contacts takes forever. And you lose all the linked contacts also!
So I call the carrier and Palm. The carrier says...."well if your phone originally was under another phone number and you changed it as part of an upgrade, that can cause it." Huh? This can affect me months later I say??? My phone number upgrade change was done BEFORE I even turned on the phone. Palm does not even know about that first number!
So I called Palm. The guy says it can happen if 2 people use the same e-mail or credit card in their palm profile. Now since it won't even allow you to setup the same e-mail twice, I'd like to know how THAT would happen. No one on my plan uses the same card.
So the question is. We know this happens sometimes. Is there any source with credibility that really knows WHY this happens??? And does any setting reduce the likelihood of it happening again? And why can't Palm make the results less debilating? There is NO REASON that it needs to delete your data. This is crazy.
Also, other than my few purchased apps, none of my critical data is even backed up by the Palm Profile!!! I still had to re-create all my POP3 accounts, change all my preferences back, re-sync with Exchange, re-sync with Chapura, and then re-marry all the contact duplicates that Synergy did not handle right. So what's the worth?
Can the Palm Profile/backup be turned off? Does changing the palm profile in the apps perferences setting from "submit password every 4 hours" (whatever that means) to only at purchase help??
Do you have any other options when you get that reboot r erase prompt? Pull the battery without answering the prompt perhaps???????
If I am on the road and this happened, I would be without half my contacts until I returned which is unacceptable. This is very disappointing. I cannot believe the default action is not "let's TRY AGAIN", and not, "hey, let's erase all of this user's data on him"!!!
If this happens one or two more times, I have had it. I will be looking at another OS and phone after having Palm phones and organizers for the last 10 years or so. This is unacceptable.
BJB

Thanks for the reply. Nowhere in here do I get the sense that Palm even thinks this is a problem or are going to work on fixing it. It implies Palm thinks it is okay and the problem is me, the user, the customer, because I do not want my data resided on Palm's servers or Google's servers. Does Palm understand this is an issue whether my data is on my home PC or in the cloud and in Palm Profile??? The issue is not how I choose to store just one of my calendars and contact lists (out of 3). The issue is a bug in the Palm profile system.
The first point is this.... Regardless of HOW this happens, Palm should not immediately erase all of my data!!!! Let's say I DID sync all my data to Palm Profile. I STILL would not want to have to re-download everything just because of some glitch with your backup servers, the carrier's network, or my phone!!! Go look at some pre forums. You will see many people that DO sync all of their data to their profile, and they are STILL upset with this Palm BUG. If security is the concern, how about asking for a password first vs. just asking whether I want to reboot or erase all data? If it is really me, I would know the password! Your answer seems to imply that what is happening is OKAY. It is NOT okay whether I sync everything to Palm profile or not!
Further, even if all my data WAS backed up to Palm Profile, you still lose all preferences, all manually matched synergy contacts, etc.... etc... Again, I would still be very upset if all my data was erased even if EVERYTHING was backed up to Palm profile. DON'T ERASE MY DATA!!!
I have no problem re-synching my exchange e-mail after a problem. It works from the road, etc. However after 10 years, Palm decided to not suport the syncing of home PC's with the Pre. An unfortunate decision as Palm was a pioneer in this. You talk about security....Perhaps some of us do not want our data stored on Palm servers or google servers!!! Yes, indeed, in the event of a crash I cannot restore from the road. I can live with this if the crash was from a hardware or software issue. But it is NOT OKAY if it is caused by Palm just because of some system glitch. Since you are not restoring my home PC data anyway, why erase it?
You talk about being logged out of your profile. My phone was just used, and it was sitting on my desk. Just sitting there. And then it popped up that "I was no longer logged into my profile". What causes this? Why does it not give me a chance to re-login? How come after the erase of data and reboot I was then magically "logged in" and it was working? Did the person that was trying to steal my non-existent data in my palm profile stop trying?
So are you telling me that someone was trying to use my phone SIM, on a pre plus, with my e-mail, and had my password....and trying to login, and that is why I got the message? And then magically right after I rebooted, they stopped trying and all was okay???
I do not believe that is the case. And again, if it is, ask for my password, or a security question, or SOMETHING to confirm that it is me. And a simple google search will tell Palm/HP that this is a problem many of us have had. If I have it consistently, as I said, a 10 year customer is gone.
BJB
PS. A reply that said: "Palm is aware of this problem and will correct it with the next software update" would be a lot more comforting.

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

You can update your AppleID info here: Manage your Apple ID
Also check this page for more details about iTunes: Apple - Support - iTunes

Can no longer log in to my computer

I searched but did not see this problem. I also posted this question the networking forum and i asked that it be removed as this seems like a better place for it.
I have 3 iMacs and several PC's in my signshop and we are bound by AD to the main PC serer and we connect via DHCP. One particular shared user can no longer log into her user from any of the iMacs. She just gets the shaking password window. But she can log into her shared user from any of the PC's. And we can all log into our shared users from her iMac.
Thins we have tried.
1. changed her password and that did not work.
2. renewed DHCP and that did not work.
3. disabled and re-enabled her acount and that didn't work.
Any advice? I will check this from work tomorrow if you need any info from the PC IT geeks
thanks!!

Thank you for the helpful tips below. I had pretty much given up deploying Leopard in my public labs until AD binding became more stable. With the 10.5.3 update, I have had stable logins/binding to AD from May 30th, when I applied the update to my 'image' client until this morning (6/20/08).
My setup is public labs in university. Mac clients use netboot for imaging and I have one OD Master server controlling client admistration (login window messages, etc.) All network accounts are via AD (MS Server 2003) with 3 Domain Controllers.
Could you please be a little more descriptive on some of your suggestions? for example:
Before you bind: #2 -- Make sure a reverse zone is populated.
Populated where? On the DC or the client?
Before you bind: #4 - Make sure round-robin ...
Where? On the DC or the client?
Before you bind: #7. Set a simple name in sharing...
This is good for individual client setup. I have a situation where I create one master image and push this master image via netboot out to the clients. All of my clients bind to AD with the same computer name, but the clients themselves have individual local host names.
If failure occurs: #1 - Use dscl to try and browse the domain.
On the DC or client?
If failure occurs: #3 - Use dirt to hammer the directory
Not sure if my AD sys admins would appreciate this without forewarning! I would appreciate any insight you could give to my questions as I am building new images for Fall 08 semester now and would love to deploy Leopard, but will not until I am positive Leopard/AD autentication is stable. If you would prefer (and have the time) to discuss this further via email, please email me at [email protected]
Thanks,
Cheryl Tarbox
Binghamton University

Installed SAP Master and can no longer log into old xIEP portal

Hello there,
I am very new to SAP so please bear with me. We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct. I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
However at the end of the installation, I clicked on start and it began to install SAP Master. Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of. Please tell me that this isn't true, and that somehow I can get access to our old portal. Any suggestions would be greatly appreciated. Thank you.

You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

I can no longer log into either of my banks on line. I have Safari 6.0.3

I can no longer log onto either of my banks. I have Safari Version 6.0.3(7536.28.10). I just did an update. On the apple bar there is https and a paddle lock. clicking on that it says I'm using an encrypted connection. I can't get past this. Help?

" On the apple bar there is https and a paddle lock."
That's standard. Has nothing to do with your issue. What happens when you try to log into a bank web site? What is the response?

OD client can no longer log in

I have a lab of 10.4.9 computers, all log in to an OD server. All has been fine for a year now, except that one suddenly would no longer log in. Any OD user. Only a local Admin would get in.
The message I get at login is:
"You are unable to log in to the user account "username" at this time" and "Logging in to the account failed because an error occurred. The home folder for the user account is located on an AFP or SMB server. Contact yor system administrator for help."
When I check in locally, I still can connect to the server, get online and everything. I checked the settings in Directory Access and al is fine there. I formatted the drive, reinstalled the OS. Still the same result.
Any suggestions for troubleshooting greatly appreciated.

Hi,
Would you please provides us the log file for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support

I can no longer log on to itunes store

I can no longer log on to itunes store or icloud
Can someone help me?

I sure did, that was the second try. Still no change as of an hour ago.
Whatever it is, it's only effecting this specific ATV. I have a couple of them running a lot when all three of my kids are home.

On logged in sites when i click the back button im no longer logged in until i refresh

On sites where i am logged in, eg forums or sites where i have saved the layout such as the BBC website whenever i click the back button to go to the previous page i am no longer logged in and my preferences have been cleared and the page has gone back to its defaults state. if i refresh the page its all back to how i set it and i am once again logged in.
== This happened ==
Every time Firefox opened
== Friday evening/Saturday morning.

Hello Jeni.
That's how Firefox works. When you go ''back'' to a page where you were not logged in yet, you get logged off. Although it doesn't always work and if you refresh the page you get logged in again.
The basis of this behavior is that clicking "Back" will take you to a page that is stored in cache, and Firefox doesn't have (in most cases) to redownload the page information again (this is good because it speeds up browsing). You can disable this behavior, but it will mean that every time you press "back", Firefox will re-load the page again, and it will not be instantaneous like it is now.

[SOLVED]Couldn't open file for 'Log debug file /var/log/tor/debug.log'

Hello,
I'm trying to run a tor relay on my arch linux box. Trying to launch the tor daemon, here's the log via
$ systemctl status tor.service
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.877 [notice] Tor v0.2.4.21 (git-505962724c05445f) running on Linux with Libevent 2.0.21-stable and OpenSSL 1.0.1g.
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.877 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.877 [notice] Read configuration file "/etc/tor/torrc".
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.909 [notice] Opening Socks listener on 127.0.0.1:9050
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.909 [notice] Opening OR listener on 0.0.0.0:9798
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.000 [warn] Couldn't open file for 'Log debug file /var/log/tor/debug.log': Permission denied
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.000 [notice] Closing partially-constructed Socks listener on 127.0.0.1:9050
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.000 [notice] Closing partially-constructed OR listener on 0.0.0.0:9798
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.000 [warn] Failed to parse/validate config: Failed to init Log options. See logs for details.
May 20 11:53:10 arch tor[21726]: May 20 11:53:10.000 [err] Reading config failed--see warnings above.
May 20 11:53:10 arch systemd[1]: tor.service: main process exited, code=exited, status=255/n/a
May 20 11:53:10 arch systemd[1]: Unit tor.service entered failed state.
Why the tor daemon cannot write into /var/log/tor/debug.log ?
Here's my /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon,nue
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,nue
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
power:x:98:
nobody:x:99:
users:x:100:
systemd-journal:x:190:
nue:x:1000:
avahi:x:84:
lxdm:x:121:
polkitd:x:102:
git:x:999:
transmission:x:169:
vboxusers:x:108:
tor:x:43:
mysql:x:89:
Last edited by giuscri (2014-05-20 12:18:56)

SidK wrote:You must have modified your torrc to print to that log file. systemd starts the service as the tor user (see /usr/lib/systemd/system/tor.service). So if if you want to log to a file the tor user must have write access to it. By default however tor it set to log to the journal, which doesn't require any special permissions.
Yes. I did edit the torrc file since I wanted the log to be store in that file. Indeed
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
## Send every possible message to /var/log/tor/debug.log
Log debug file /var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
Log notice syslog
## To send all messages to stderr:
#Log debug stderr
I missed the file systemd uses to choose who's the process owner.
Course, I could edit /usr/lib/systemd/system/tor.service such that root will become the process owner; or, I could add the user I use everyday in the root group, then change the permission of /var/log/tor/debug.log such that it will be writable also for the folks in the root group.
Yet they both seems to be a bit unsafe ...
What is the best choice, to you guys?
Thanks,

I can no longer log on to facetime

I can no longer log on to facetime on my ipodtouch

Try removing the account in Settings - Facetime and logging in again.

[Solved] Pacman.log no longer logging maybe systemd

Similar Messages

Maybe you are looking for