[SOLVED] plasma-desktop could not start
hi!
i have almost two weeks after installing archlinux yesterday i powered off the laptop and when i powered it on but there was no plasma-desktop then i tried plasma-desktop in the consoe and i get this output
[issam@fuhrer ~]$ plasma-desktop
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
any suggestions?
Last edited by fuhrer (2013-07-22 17:07:03)
sorry i forgot to give the solution
i removed/moved the "~/.kde4" directory and every thing returned as usual and if you have some themes/dolphin plugins/ksplash themes ... you can make backup and copy theme to the new "~/.kde4" directory
Similar Messages
-
[Solved] plasma-desktop won't start by itself
Not sure what I did but when I try to log in to KDE 4.5, via KDM, slash screen does it's thing, and then I end up with a session that doesn't have plasma-desktop. I have to run plasma-desktop from krunner (Alt+F2) to start it. How do I get it to start on its own again?
EDIT: In trying to change KDE to use the raster graphics system I misspelled it. Dumb.
Last edited by herrvideman (2010-08-26 23:56:06)Not sure what I did but when I try to log in to KDE 4.5, via KDM, slash screen does it's thing, and then I end up with a session that doesn't have plasma-desktop. I have to run plasma-desktop from krunner (Alt+F2) to start it. How do I get it to start on its own again?
EDIT: In trying to change KDE to use the raster graphics system I misspelled it. Dumb.
Last edited by herrvideman (2010-08-26 23:56:06) -
My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.here is link to the apple product feedback website:
http://www.apple.com/feedback/ -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Could not start the app due to a configuration problem - Launchpad issue
Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
MayankHi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas -
Sun Java System Application Server8 could not start..using OSX
I am having problems trying to run my application. When run the applicaiton it tries to deploy it but fails with a message that is could not start the applicaiton server. It suggests the fault could be port conflicts or corrupt domain.xml file.
If I use a browser and goto localhost:18080 I see the applicaiton server seems to have started.....
To be sure I have no port problems I shutdown all sharing services(FTP, Windows File Sharing etc.) Still not luck.....
Ideas??Hi
There are situations where appserver watchgog process might be running still even after shutting down the appserver process and sharing services.
I experienced this few times and rebooted the machine to solve this. This may not be the best solution but try to reboot the machine.
Thanks
Srinivas -
Could not start Agent on a Solaris 5.10u2 x86 machine
Hi,
I installed SunMC 3.6.1 on a Solaris 5.10u2 x86 machine. Only Agent
and Concole are installed.
There's no error during installation and setup, but the agent could not be started.
# /opt/SUNWsymon/sbin/es-start -a
Could not start Agent.
After running svcs -x, I could see:
# svcs -x
svc:/application/management/sunmcagent:default has no "restarter" property group; ignoring.
svc:/application/management/sunmcplatform:default has no "restarter" property group; ignoring.
svc:/application/print/server:default (LP print server)
State: disabled since Mon Aug 21 10:41:38 2006
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: lpsched(1M)
Impact: 2 dependent services are not running. (Use -v for list.)
# svcs -v
offline - Aug_21 - svc:/application/print/ipp-listener:default
offline - Aug_21 - svc:/application/print/rfc1179:default
- - - svc:/application/management/sunmcagent:default
How to solve this problem? Any help is appreciated.
HalHi Hal, :)
# /opt/SUNWsymon/sbin/es-start -a
Could not start Agent.I've seen this before too. "svcadm enable/disable sunmcagent" didn't fix things. But for some reason if I started the agent interactively (es-start -ai) it worked... and I let the Agent load a few modules and verified it worked in the Console. Then once I quit out of interactive mode (thereby stopping the Agent) svcadm enable/disable and es-start/stop worked correctly again.
I had that happen to me 2-3 times now, and every time mucking about in interactive mode a bit fixed it. It must reset something in svcs.
Regards,
[email protected]
http://www.HalcyonInc.com -
Could not start Layout Designer (see long text)
Dear All,
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Refer also to SAP Note 1121176.
Note : I have already checked forums and also the long text file , i have installed SAP gui 720 with latest patch even though , we are getting the same error . or i have to installed ADOBE LIFE CYCLE DESIGNER to user PC ?
Note :
One of the forum is mentioned ,we can also download and install the newest SAP GUI (what is 7.2 i believe) which has LCD as a part of installation.
but still i am getting error .
SAP gui Details :
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
saplogon.exe
SAP Logon for Windows
720 Final Release
7200.3.9.1071
1286983
SYSTEM INFORMATION:
Operating system: Microsoft Windows XP 5.1 (2600)
Service Pack 3
Kindly advise.Please let me know the path and it can be used permanent ? or it will ne expired ?
Thanks
Edited by: satheesh0812 on Nov 29, 2011 12:17 PM -
Could not start the hyperion workspace-web application Error 1067
Hi,
I have installed hyperion from scratch in a distributed environment...everything was working fine.......i.e. shared services, workspace, essbase, sql server, and hfm. I was able to logon and navigate different options in the hyperion products...but essbase stopped working when I re-started all four servers ....?
(1) When I restarted all four servers and stopped and restarted all hyperion services as per giving sequence then everything works fine but essbase EAS console and workspace web console...i was getting error message " could not connect to administration server" whenever i try to connect EAS console to essbase then I went to services there I saw workspace agent and workspace web application service is down.
(2) as soon as I started those both services then my shared services automatically stopped but I was able to logon in Essbase console and workspace console but my shared services are down...
(3) as soon as I start shared service they started but my workspace agent and workspace web application automatically stopped...and when I try to start again workspace web application then I get this error "[ Could not start the hyperion workspace-web application services on local computer. Error 1067: the process terminated unexpectedly]"
I have been searching online and googling but have a hard luck to get some best solution for this...can some one help me or guide me to walk through with this issue...
Thank you very much in advance ...
Regards,
SafiI solved this issue...It was with Hyperion Services those were stop responding some how.....but I stopped each service and restarted then those started working again...
Regards,
Safi -
Could not start transport control program tp
Hi all
when i am trying to see the TP Parameters i am getting the below error:
System DV2 Command TMS_MGR_READ_TPPARAM
Client 000 Service Transport Service
User TMSADM Start Online
Date 10/18/2008 Function TMS_TP_READ_TPPARAM
Time 12:03:39 Message TP_CALL_FAILED
Could not start transport control program tp
RFC error: Error when opening an RFC connection
and in SMGW i am seeing the below error:
Sat Oct 18 11:09:33 2008
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >/usr/sap/DV2/DVEBMGS00/exe/tp< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname, conv ID: 60516439 [gwr3cpic.c 6148]
please help me to solve this.
Thanks:
GiridharHi Giridhar,
I think its a cpic timeout occurring before reading tp could start. Please check the parameter gw/cpic_timeout in your system. The default may be 20 sec for this parameter.. You can consider it increasing to 60 sec.
https://service.sap.com/sap/support/notes/638701
Regards,
Debasis. -
MDM Adapter: MDM Adapter listener could not start (MdmSecureSocketFactory)
Hi there,
We are running the following versions of the PI MDM adapter:
MDM_ADAPTER 710.700 SP7 (1000.710.700.7.0.20110411174317)
MDM_JAVA_API 710 SP5 (1000.710.0.5.111.20101227095400)
com.sap.mdm.tech.apireset 710 (710.20101227094734.0000)
com.sap.mdm.tech.connector 710 (710.20101227094734.0000)
com.sap.mdm.tech.mdm4j 710 (710.20101227094734.0000)
tc/mdm/adapter/svc 710.700 (8917411)
And the following versions on the MDM Server itself:
SHARED_COMP 7.1.05.104
MDS 7.1.05.104
MDIS 7.1.05.104
MDSS 7.1.05.106
MDLS 7.1.05.99
All the MDM adapters have the same error now:
MDM Adapter listener could not start due to:
com/sap/mdm/net/MdmSecureSocketFactory
Does anyone know what this error means?
Any help would be greatly appreciated
LyntonWas just a version issue, the MDM java API and MDM adapter had different versions.....un-deploying and re-deploying solved the issue.
Lynton -
Could not start Layout Designer
When i press layout button in adobe forms (SFP) i am getting the following error..
LONG TEXT:
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).Hi Kodandarami Reddy.S ,
Which web site did you downlad the adobe lifecycle v8.0 ? I have to install this program to make a adobe forms.
Regards
recoba561161 -
SMLT Could not start transport control program tp
Hello.
I want to install language on fresh system ERP 2005 SR2. Platform is AIX and Oracle. In SMLT i get error:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
trace from SMGW:
Fri Sep 7 15:22:10 2007
ERROR => GwISearchPartner: timeout, partner LU: >sapdb2<, TP: >/usr/sap/TR3/DVEBMGS01/exe/tp< [gwr3cpic.c 5842]
ERROR => GwISearchPartner: HOST: sapdb2, conv ID: 58517568 [gwr3cpic.c 5855]
Fri Sep 7 15:22:12 2007
ERROR => GwIConnectHandle: conversation 58517568 not found
(lu=sapdb2 , tp=tp , host=sapdb2) [gwxxrd.c 7762]
I have update the kernel and tp to the newest version.
Can anybody help me to solve this problem ?
Thanks.I found problem in TCP/IP RFC connection CALLTP_AIX :
I tested it several times, and sometime it returns error:
Logon Cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout bei
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host sapdb2 / sapgw01
Error Details DETAIL: no connect of TP /usr/sap/TR3/DVEBMGS01/exe/tp from host sapdb2 after
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 192
Error Details MODULE: gwr3cpic.c
Error Details LINE: 5873
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Fri Sep 7 16:04:55 2007
Error Details VERSION: 2
Also report RSTPTEST somitemes return problem in step RFC ping:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout beim Verbindungsaufbau (Partner vorhanden ?)
Message was edited by:
Evgeniy Druzkin -
Could not start SQL services (Plz help me)
I logged in windows with an administrator account, but I could not start sql services. Here is the newest log file, please help me to fix it. Thank in advanced.
2014-10-02 16:17:49.06 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 3)
2014-10-02 16:17:49.06 Server (c) 2005 Microsoft Corporation.
2014-10-02 16:17:49.06 Server All rights reserved.
2014-10-02 16:17:49.06 Server Server process ID is 3888.
2014-10-02 16:17:49.06 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2014-10-02 16:17:49.06 Server This instance of SQL Server last reported using a process ID of 1104 at 10/2/2014 4:07:13 PM (local) 10/2/2014 9:07:13 AM (UTC). This is an informational message only; no user action is required.
2014-10-02 16:17:49.06 Server Registry startup parameters:
2014-10-02 16:17:49.06 Server
-d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2014-10-02 16:17:49.06 Server
-e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2014-10-02 16:17:49.06 Server
-l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2014-10-02 16:17:49.07 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-02 16:17:49.07 Server Detected 2 CPUs. This is an informational message; no user action is required.
2014-10-02 16:17:49.71 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
--The Anh--Hello,
Can you tell us the status of the issue ? If you have found answer please post here so that it can help other members when needed. If You found answer in this thread please mark answer to the post and close the thread
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
When trying to start the camera I get this message..Could not start the camera. Close other applications and try opening the camera again.
I have nothing else running other than the phone itself waiting for a call. I can not find anything on Blackberry support for this issue unless I am missing it.
When I first got the phone a couple of months ago it worked fine and I could send pictures, now it is stuck.
Thanks for any help.
CB
Solved!
Go to Solution.Some say that removing the battery cover and pushing down around the camera lens will solve this problem. Apparently, it's a hardware issue. If it keeps up, you will likely need a replacement device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Maybe you are looking for
-
Deployment failure in web services tutorial
In http://java.sun.com/webservices/docs/1.2/tutorial/doc/index.html I have got as far as Chapter 3: Getting Started with Tomcat and attempted to build and run the /gs example. I have HTTP error 404, apparently for neither of the possible reasons give
-
Hi Gurus, I have three iviews (v1,v2,v3)assigned to a role(RoleAll) which will be assigned to user. The requirement is: certain user can only see certain iviews. my notion is: another three roles(role1, role2, role3) created, and set the iviews' end
-
Udm_dispute enhancement
Hi Experts, In udm_dispute transaction, after the status of case is set to 'closed', the screen is seen in Display mode. The requirement is to make 'Planned close date' editable even after the status is closed. Please suggest the screen exit which ca
-
Hi, How can we create dynamic pages(new page) in Scripts? ie., like I am selecting a new company code, while doing this I need a page to be created dynamically. Regards, Renjith MIchael.
-
How to import mp3 into Logic 7.2.1 ?
How to import mp3 files into Logic 7.2.1, without converting the file? I have tried to make an mp3 with logic 7.2.1 and then improt it into logic again, and it still converts the **** file. Help needed here. I thought importing mp3 files in Logic 7.2