[SOLVED]ps not found, and path is ok have I a rootkit?
Hi!
Often use ps aux, but yesterday remanded me ps not found, I've been looking and I have found that saying that goes some thinking of reformatting or others others who if use much the ps happens. shocked!?!? No joke, This is in stack overflow, saying that these issues had to superusers
The rkhunter returns me these warnings
Checking for prerequisites [ Warning ]
/usr/bin/ldd [ Warning ]
/usr/bin/vendor_perl/GET [ Warning ]
Checking for passwd file changes [ Warning ]
Checking if SSH root access is allowed [ Warning ]
Checking if SSH protocol v1 is allowed [ Warning ]
Checking for running syslog daemon [ Warning ]
Checking for hidden files and directories [ Warning ]
Iptables, enp4s0 not connected to internet only local network. and transmission, nfs and avahi not in use but sometimes I need it and as it is only local ...
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
2200K 147M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
251 15628 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- enp4s0 * 0.0.0.0/0 0.0.0.0/0
1210 92492 logdrop all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate INVALID
0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 ctstate NEW
1238 107K UDP udp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW
0 0 TCP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 ctstate NEW
1368 109K logreject all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 limit: avg 30/min burst 8
0 0 DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8
0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 recent: SET name: TCP-PORTSCAN side: source mask: 255.255.255.255 reject-with tcp-reset
0 0 REJECT udp -- * * 0.0.0.0/0 0.0.0.0/0 recent: SET name: UDP-PORTSCAN side: source mask: 255.255.255.255 reject-with icmp-port-unreachable
0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-proto-unreachable
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 4480K packets, 6106M bytes)
pkts bytes target prot opt in out source destination
Chain TCP (1 references)
pkts bytes target prot opt in out source destination
0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 recent: UPDATE seconds: 60 name: TCP-PORTSCAN side: source mask: 255.255.255.255 reject-with tcp-reset
0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:111
0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:2049
0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:20048
0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:57372
Chain UDP (1 references)
pkts bytes target prot opt in out source destination
0 0 REJECT udp -- * * 0.0.0.0/0 0.0.0.0/0 recent: UPDATE seconds: 60 name: UDP-PORTSCAN side: source mask: 255.255.255.255 reject-with icmp-port-unreachable
0 0 ACCEPT udp -- * * 192.168.0.0/24 0.0.0.0/0 udp dpt:111
0 0 ACCEPT udp -- * * 192.168.0.0/24 0.0.0.0/0 udp dpt:2049
0 0 ACCEPT udp -- * * 192.168.0.0/24 0.0.0.0/0 udp dpt:20048
44 6116 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:57372
0 0 ACCEPT udp -- * * 192.168.0.0/24 0.0.0.0/0 udp dpt:5353
Chain logdrop (1 references)
pkts bytes target prot opt in out source destination
380 30618 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 10 LOG flags 0 level 4 prefix "IPTables dropped: "
1210 92492 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain logreject (1 references)
pkts bytes target prot opt in out source destination
491 39302 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 10 LOG flags 0 level 4 prefix "IPTables rejected: "
1194 101K REJECT udp -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
2 3000 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset
172 5160 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-proto-unreachable
And systemctl list-unit-files
cronie.service enabled
dhcpcd.service enabled
display-manager.service enabled
[email protected] enabled
iptables.service enabled
netctl.service enabled
nfsd.service enabled
rpc-idmapd.service enabled
rpc-mountd.service enabled
slim.service enabled
[email protected] enabled
transmission.service enabled
remote-fs.target enabled
but ps returned without doing anything also need to format
My question is: this is a rootkit? And as you can be having this configuration? How can improve my safety?
regards
Last edited by botika (2014-01-09 21:54:53)
alias
alias ..='cd ..'
alias :Q=' exit'
alias :q=' exit'
alias :x=' exit'
alias cd..='cd ..'
alias chgrp='chgrp --preserve-root'
alias chmod='chmod --preserve-root'
alias chown='chown --preserve-root'
alias cls=' echo -ne "\033c"'
alias cp='cp -i'
alias da='date "+%A, %B %d, %Y [%T]"'
alias doc='xdg-open'
alias du1='du --max-depth=1'
alias firewall='iptlist'
alias gem='export GEM_HOME='\''/home/pcare/.gem/ruby/2.0.0'\'' && gem'
alias gem-1.9='export GEM_HOME='\''/home/pcare/.gem/ruby/1.9.1'\'' && gem-1.9'
alias grep='grep --color=auto'
alias halt='sudo systemctl poweroff'
alias hist='history | grep'
alias ipt='sudo /sbin/iptables'
alias iptlist='sudo /sbin/iptables -L -n -v --line-numbers | column -t'
alias iptlistfw='sudo /sbin/iptables -L FORWARD -n -v --line-numbers | column -t'
alias iptlistin='sudo /sbin/iptables -L INPUT -n -v --line-numbers | column -t'
alias iptlistout='sudo /sbin/iptables -L OUTPUT -n -v --line-numbers | column -t'
alias iptlisttcp='sudo /sbin/iptables -L TCP -n -v --line-numbers | column -t'
alias iptlistudp='sudo /sbin/iptables -L UDP -n -v --line-numbers | column -t'
alias la='ll -A'
alias listd='find /etc/systemd/system -mindepth 1 -type d | xargs ls -l --color'
alias ll='ls -l'
alias lm='la | more'
alias ln='ln -i'
alias lr='ls -R'
alias ls='ls -hF --color=auto'
alias lt='ll -rt'
alias lx='ll -BX'
alias lz='ll -rS'
alias mv='mv -i'
alias netctl='sudo netctl'
alias openports='ss --all --numeric --processes --ipv4 --ipv6'
alias pac='/usr/bin/yaourt -S'
alias pacc='sudo /usr/bin/yaourt -Scc'
alias pacexpl='/usr/bin/yaourt -D --asexp'
alias paci='/usr/bin/yaourt -Si'
alias pacimpl='/usr/bin/yaourt -D --asdep'
alias paclf='/u sr/bin/yaourt -Ql'
alias paclo='/usr/bin/yaourt -Qdt'
alias pacq='/usr/bin/pacman -Qs'
alias pacr='sudo /usr/bin/yaourt -Rs'
alias pacrf='sudo /usr/bin/pacman -Rscsn'
alias pacro='/usr/bin/pacman -Qtdq > /dev/null && sudo /usr/bin/pacman -Rs $(/usr/bin/pacman -Qtdq | sed -e '\'':a;N;;s/\n/ /g'\'')'
alias pacs='/usr/bin/pacman -Ss'
alias pacsa='/usr/bin/yaourt -Ss'
alias pacu='/usr/bin/yaourt -Syua'
alias pgg='ps -Af | grep'
alias ports='sudo netstat -tulanp | column -t'
alias reboot='sudo systemctl reboot'
alias rm='rm -I --preserve-root'
alias root='sudo -s'
alias scat='sudo cat'
alias scp='sudo cp'
alias smv='sudo mv'
alias srm='sudo rm'
alias sudo='sudo '
alias svi='sudoedit'
alias t3='sudo systemctl isolate multi-user.target'
alias t5='sudo systemctl isolate graphical.target'
alias wifi='sudo wifi-menu'
which ps
/usr/bin/ps
file $(which ps)
/usr/bin/ps: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=d861e03566317829beeeecc7e9769de7eac35298, stripped
echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/bin:/opt/cuda/bin:/usr/bin/vendor_perl:/usr/bin/core_perl
pacman -Qs procps-ng
local/procps-ng 3.3.9-1 (base)
Utilities for monitoring your system and its processes
ewaller wrote:My hunch is that you have taken a pretty large leap here.
Hopefully you're right, Anyway, my system is safe? I followed all safety guidelines, the principles recommended, minimum permissions, etc.
Thanks for quickly answer
Last edited by botika (2014-01-09 18:53:19)
Similar Messages
-
[SOLVED] Device not found and kernel panic
Hi,
I'm having an issue with the kernel. I get this weird error while booting:
Booting the kernel.
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
ERROR: device '' not found. Skipping fsck.
ERROR: Unable to find root device ''.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]# _
I don't have the slightest idea what to type in that shell, so I exit (^D) and get an error with its shell, another one and finally a kernel panic. Do I have to report the other two error as well? I think this might be related to a recent change in my syslinux.cfg. I wanted to add hibernation cabability to my arch, so I added "resume=/dev/sda2" (my swap) to kernel options. It should not yield such a result though. As a matter of fact, I get it even if I remove that parameter at runtime. For now, I managed to boot with Fallback Initramfs.
Here is syslinux.cfg, as well:
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 1 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
APPEND resume=/dev/sda2
INITRD ../initramfs-linux.img
# (1) Arch Linux Fallback
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
INITRD ../initramfs-linux-fallback.img
# (2) Windows
#LABEL windows
#COM32 chain.c32
#APPEND hd0 0
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
Any ideas?
Thank you,
rubik
Last edited by rubik (2012-07-22 10:03:59)Also, don't use "root=/dev/disk/by-uuid/...", that's just wrong. Udev kicks in after the bootloader phase.
https://wiki.archlinux.org/index.php/Sy … nux_Config
Here's mine:
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff ro quiet vga=current
INITRD ../initramfs-linux.img
And don't forget to mark it as solved. -
can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi -
EIS : Data source name not found and no default driver specified
Hi
I have Oracle Essbase installed in a x86_64 machine.
I have configured odbc 64 bits how is indicated in SQL Interface Guide, but when try to create catalog the message "ODBC Error [DataDirect][ODBC lib] Data source name not found and no default driver specified"
The is.sh script set these environment variables:
#!/usr/bin/ksh
export ISHOME=/u01/app/oracle/Middleware/EPMSystem11R1/products/Essbase/eis/server
export EPM_ORACLE_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export HYPERION_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export ARBORPATH=$ISHOME
export ESSBASEPATH=$ISHOME
export ISLOADINFO=$ISHOME/loadinfo
export ISODBC=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0
export ODBCINI=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0/odbc.ini
export TEMP=/tmp
case `uname` in
AIX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LIBPATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LIBPATH;;
HP-UX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export SHLIB_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$SHLIB_PATH;;
Linux)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH ;;
SunOS)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH;;
echo `uname -a`;;
esac
export CLASSPATH=$EPM_ORACLE_HOME/common/jlib/11.1.2.0/epm_j2se.jar
export PATH=$JAVA_HOME/bin:$ISHOME/bin:$PATHHi Andres, Can you please tell me how you resolved this issue? I'm getting the same error when I start EIS as windows services, but when I start from console it works fine.
Updated................Issue resolved!!!
OK. Upon researching other windows forums found that I had to add System DSN to ODBC administrator under "C:\Windows\*SysWOW64*\odbcad32.exe". This is because the server is a windows 64-bit machine.
Thanks
Edited by: U12345 on Dec 14, 2010 5:58 AM
Edited by: U12345 on Dec 14, 2010 6:01 AM -
Getting "Data source name not found and no default driver specified"
Hi all,
I'm trying to create a connection in SQL Developer (1.5.0.53) to an Access MDB using the Access Tab on the "New / Select Database Connection" window. I navigate to my MDB and then click the Test button and this is what I get:
"Status : Failure - Test failed: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
I do have the 1.6 JVM.
Not a show stopper, but would like to see how SQL Developer works with Access tables, so any help would be appreciated.
TIA,
SteveThis error message sounds like the MS Access ODBC driver or the Jet Engine drivers are not found. First of all you need to check the PATH environment setting if it includes the windows/system32 directory as this is the default directory for the MS Access ODBC drivers.
Next check if you are a normal user or a local admin user. As local admin open the ODBC Adminstartor (Control Panel/administrative tools) and check if a MS Access ODBC driver is registered.
If all above is true, please get from www.sysinternals.com and et the process monitor. Open it and apply a filter: Process name is sqldevloper.exe
Then start SQL Developer and open your created MS Access link. Process mon will now track all info containing all additional DLLs it tries to load.
Check out the generated log file from the bottom (last info about the mdb file load) to the top and look if it really finds all libraries, especially the MsAccess and Jet libraries. -
WIS: 10901 Data source name not found and no default driver specified(ODBC)
Hi, gurus.
We've created a universe based on Excel spredsheet or MS Access which is using ODBC connection. Then, I try to create query (which is using these universe) in QAAWS or in InfoView, and when I add a filter object to the query, the error occurs:
"GetDatasourceObject LOV exception (error WIS: 10901)".
If I don't choose any filter options and want to create query, I'm getting the error: ' [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (error WIS: 10901)'.
We tried to do this in different operations systems - Windows 7 (32 bit) and XP (32 bit).
Anymore, we can use this universes at web intelligence rich client with or without filters.
Need to solve this problem. Please help us.Dear all,
I got the same problem, I have installed BOE 4.0 at Win XP 64 bits, and also installed Sybase IQ 15.2 (32bit) ODBC, and has create the odbc entry "shkdemo" at the System Tab. However, I still got the same error when using the the "Interactive Analysis" thru "BI Launch pad".
For BOE 4.0, I found that I could only use the BOE Client tools (Universal Design Tool) to create the connection, this client tool I installed it at another 32 bit XP laptop, and I also installed the Sybase IQ 15.2 (32bit) ODBC with the same odbc entry "shkdemo", and using the "Interactive Analysis Desktop, I could be able to create report with data from IQ 15.2.
Kindly advise, why I still got the error of "10901 Data source name not found and no default driver specified(ODBC)" when I use the "Interactive Analysis" thru "BI Launch pad".
Cheers,
Hilda -
Hi, whenever i open this project, there's always this error, anybody knows how i can get rid of it? I have MinGw installed and path-ed already.
Your English is far easier to understand than native speakers who assume a huge amount of knowledge.
I have followed your steps, but i have the following problems:
Problem pane:
Description Resource Path Location Type
Program "g++" not found in PATH Preferences, C++/Build/Settings/Discovery, [CDT GCC Built-in Compiler Settings] options C/C++ Scanner Discovery Problem
Program "gcc" not found in PATH Preferences, C++/Build/Settings/Discovery, [CDT GCC Built-in Compiler Settings] options C/C++ Scanner Discovery Problem
undefined reference to `WinMain' [project name] line 0, external location: C:\MinGW\x86_64-w64-mingw32\lib\libmingw32.a(lib64_libmingw32_a-crt0_c.o):crt0_c.c C/C++ Problem
A little red X symbol on the project in the Project explorer
When i choose Run/Run or Run/Debug, I get the error "Launching [project name].exe has encountered a problem., Program file does not exist.
Indeed the file does not exist at that location, and I have no idea how to put it there. Can anyone help please?
Thanks -
Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Task not found at path: /Developer/usr/bin/gdb
My xcode works fine but debugging does not and this is the error i get whenever the debugger starts in xcode.
Task not found at path: /Developer/usr/bin/gdb
Looking in that path gdb is truly missing. find /Developer/ -name "gdb*" -type f -print comes up with;
/Developer//usr/libexec/gdb/gdb-i386-apple-darwin
/Developer//usr/libexec/gdb/gdb-powerpc-apple-darwin
..so ln -s /Developer/usr/libexec/gdb/gdb-i386-apple-darwin /Developer/usr/bin/gdb makes the debugger work again.
I couldn't find this exact error on google and i tried searching this forum here on discussions too.
I would like to know why this happened, i'm suspecting the upgrade to snow leopard, and if my solution is correct or if it might break something in the future?
I did reinstall xcode after i upgraded to snow leopard, with the latest xcode version at the time of the upgrade, for what it's worth.Moved Thread:
http://discussions.apple.com/thread.jspa?threadID=2478061&tstart=0 -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work
For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
I have been getting error messages .n MS windows the APS Daemon ,exe is unable to locate a component and the itunes updates and program failed to start because MSVCR80,dll was not found. As advised I have uninstalled all Apple Inc. programs except the Apple Mobile Device program. Then I reinstalled itunes but still get the errors and can't run itunes. Advice....
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Yesterday I updated my Itunes account and it stopped working. I tried installing itunes version 11.1.4 and once done it came back with 2 error messages MsvCR80.dll was not found and I tunes was not installed correctly Error 7 (windows error 126) I have removed Itunes completely and redownloaded several times with the same result. Is there an easy fix or can I download an older version of Itunes that works?
None of the solutions mentioned in this forum work for me. I've not ever had a problem with your software before. I installed and uninstalled itunes 3 times. No itunes directories exist. I've uninstalled everything labled Apple on my pc withe the same results. The problem is with your software not Windows.
Maybe you are looking for
-
So I just recently got a new computer. The only problem is that my iphone has been connected to my sisters computer for a year and i want my phone to be on my computer. I tried to back my iphone up to my computer and it deleted everything i had on my
-
I used to send out christmas greetings from my biz to groups of 20 customers, in BCC format. all addresses are good, but the emails don't get sent now because of the supposed ASCII problem.
-
Buy an iPad with a UK charger in the US
Hello, I would like to buy the newly released iPad 2. I am currently in New York but will be moving to the UK by the end of November. Is it possible to buy an iPad 2 in the US with a UK charger ? Thanks a lot for your answers
-
Need to run 1.4.2 and 1.5.6
Currently we have two NMS applications that require to deferent versions of Java 1.4.2 and 1.5.6. We need to be able to run both application on a windows 2000 environment. We are using IE 6.0. Any suggestions. Thanks Bill
-
Bookmarks and History now blank and not functioning.
I turned on Sync on a computer that does not connect to the cloud. I have since disabled it. However, history and bookmarks are cleared and I can't add to them. Also the url of the site I am on does not always display in the menu slot.