[Solved] Some icons are not shown in certain websites.

For example:
trello.com
gist.github.com
is like this:
many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
It also happens to a gitlab server site I set up:
How can I debug this? Does it happen at your place?
EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
Last edited by xgdgsc (2013-06-08 12:38:08)

Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Similar Messages

  • Some icons are not shown correctly in Gnome tray

    The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
    I noticed that Synergy icon behaves also wrongly.
    thanks
    Jan

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Close, new, back, forward icons are not shown

    Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
    Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Sometimes, some images are not shown...

    Hi!
    Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

    I am having a similar problem so maybe someone can help me too.
    I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
    I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
    I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
            MediaTracker tracker = new MediaTracker(applet);
            for (int i = 0; i < img.length; i++) {
              img[i] = applet.getImage(urlCodeBase, imagePath + images);
    tracker.addImage(img[i], i);
    tracker.waitForID(i);
    if (tracker.isErrorAny()) {
    System.err.println("Error loading image " + images[i]);
    My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
    Any ideas would be a great help!

  • COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

    I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Some parameters are not shown in parameter dialog

    Hello,
    I created a VB.NET program using VS2005 sample.
    When the program refers to CR10's DLLs (VS2005 bundle),
    it prompts all parameters correctly.
    But when the program refers to CR12's DLLs, some parameters are not prompted.
    I installed merge module 12.2.
    I also checked CR11 (merge module 11.5) and  found the result is equal to CS12.
    Thank you

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Helpful and Correct icons are not shown (anymore) on certain threads only

    I think there is a bug somewhere as i.e. at the top of this thread Re: Need Help in writing the Business Rule
    I can read "This question is answered. Helpful answers available: 5. Correct answers available: 1. "
    But not a single of the following answers shows the helpful (yellow star) or correct (green star) icon.
    Is it only me or do others experience similar situations?

    Thanks. I think Justin's "non-intuitive" is worth a "correct".
    BluShadow is "correct" too.
    When I click on correct OR helpful next to this post (no matter which of them) I get shown a radio button where I can choose only one of this two: "Yes, my question has been answered." or "No, my question has not been answered yet."
    I am not very much interested in the points but want to find "good answers" quicker when reading through different posts. And for this reason the icons are extremely helpful.
    I would suggest every answered thread must get at least one "green" icon in order to be closed. If there is no correct answer I would i.e. have to post my own solution to it and this would get the "green" icon which could be altered i.e. to a blue one or so...
    Thanks everyone anyway. I am now going to try to give some points, as I now above this text do choose "Yes, my question has been answered." :-) Hopefully I will get a change to give some points after this or I will know that "answered" will mean "closed" ;-)

  • Some appointments are not shown sometimes

    I access a Webaccess server that is in GMT+1 timezone from GMT-5 timezone and have GW set to either GMT-5 explicitly or use workstation's timezone. I did this test on Sunday Feb 26 and couple hours into Monday Feb 27 (GMT-5) - I created an appointment for Feb 26, 11:00-11:59pm from within a week view. As soon as it was created, it was not shown either in week or day views or basic interface, but could only be seen in month view or when searching for appointments. That is just an example, it was not a single occurrence, but I had several test appointments like that. Then I also had appts that were not shown even in month view, but only in search results. Regarding that Feb 26 appt, it could be made seen again in day or week views if a different timezone was chosen in options. Today, Feb 27 at the end of the day, that appointment is seen no problem in day and week views and also in basic interface, so I do not have a reliable way of reproducing the problem. Since the appt was not shown even in basic interface before, I suspect it is a server time computation/database query problem and not browser graphics rendering problem. Also, there used to be a pdf file with Webaccess API that showed how to query calendar with startDate and endDate parameters which can be done in basic interface by manually editing the address field in browser and that part is broken too - Webaccess does not show some appointments after given start date, until the start date is moved up earlier to coincide with start of the day in GMT timezone. All that used to work fine in earlier GW versions. It looks like in GW2012 some big design changes were made and some serious bugs were introduced.

    The missing piece is how ( every other way of accessing the calendar ) sees the apointment. What happens from the Windows client? Does it show the missing appointment created in webaccess?
    Its certainly possible that some boundary condition bug is being exercised. But we need to get this to the point where it can be easily reproduced. I suspect the issue has to do with the time zone being signed differently, e.g. +1 vs -5.
    Webaccess is essentially a rewrite in 2012, this eliminated the GWINTER server component and so there are a lot of positives to this move. All things considered, its been pretty decent.
    -- Bob

  • We have an openerp server with webclient, after upgrade of firefox some icons are not oppening submenus as it used to be, while they are still working on internet explorer 8

    We have an ERP application(openerp), where the web client was working very fine.
    After one of the upgrades of firefox, some of the icons on the web page that should open a sub-page for selection of items in the main page are not working any more. We click on them, yet no response
    I donwloaded the fidler and it record any request sent from the PC when clicking those icons.
    I tired internet explorer 8 and the icons are working, so it is not a server side problem

    Hi,
    There're some "known issuees" with some updates, as described in the following KB:
    http://support.microsoft.com/kb/2962872/en-us 
    I would suggest install the update below which might solve the IE crash issue
    http://support.microsoft.com/kb/2977629/en-us
    Yolanda Zhu
    TechNet Community Support

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • R12-Check Printing-Some fields are not shown in Arabic

    Hi, we have a unique problem while printing the checks some fields are printed correctly in Arabic and some are printed in english, once in english are payee name, payee address, invoice number . am i missing something here, any help is appreciated.
    Regards
    Santy

    There are couple of ways to achieve this,
    1) - Create 2 variants, 1 variant for CFO with all the fields  & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
    From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
    2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
    Eg: UserID -
    Fields
           CFO -
    ALL ( report should display all the fields)
         NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
    Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
    Regards,
    Reazuddin MD

  • Some Apps are not shown in the Appstore

    I just updatet my Iphone to firmware 5.0.1.
    Now some Apps aren't shown in the Appstore
    For Example Whatsapp
    What can i do now?

    Hi,
    Go to Tcode SXI_CACHE for refreshing the Directory Caches. Go to Adapter Engine link and refresh the same
    Go thru following threads may be useful.
    Message not seen in SXMB_MOni
    Missing Messages - in RWB but not sxmb_moni
    For Adapter Engine you can do as below.
    http://<host>:<port>/CPACache/refresh?mode=full|delta
    In addition to above..
    Go thru following link about Processed XML messages.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9a5c3bab977239e10000000a114084/frameset.htm
    Just add on info.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/6baeae38391a6ee10000000a11466f/frameset.htm
    Hope this helps..
    Regards,
    Moorthy

  • Some interfaces are not shown in the sxmb_moni

    Hi all,
    We are facing the following scenario:  we have one interface in XG1 (development environment) which is very simple: it consists of a sender ‘File’ and a receiver ‘IDOC’. The file format has been double checked and apparently is what XI defines but when we execute, we can not see anything in the sxmb_moni and if we look into the ‘adapter monitor’ -> ‘file’ adapter, we can see that the sender seems to execute successfully but the receiver still shows the following: ‘no message processing until now’. So no IDOC is generated and no xml message can be seen in the TCODE sxmb_moni.
    Also we have some interfaces that has ‘file’ receivers and we have the same problems. So, for any reason, the receivers are not working properly. I have refreshed CPACache but the error persists.
    It is preventing a whole team of doing some tests and as the golive date (March-April) is approaching it is impacting us in a strong way.
    Could you please give us some support?
    XIAFUSER is getting locked periodically (i see it in the SLD user management), do you think it will be the main reason of this?
    Thanks in advance and kind regards

    Hi,
    Go to Tcode SXI_CACHE for refreshing the Directory Caches. Go to Adapter Engine link and refresh the same
    Go thru following threads may be useful.
    Message not seen in SXMB_MOni
    Missing Messages - in RWB but not sxmb_moni
    For Adapter Engine you can do as below.
    http://<host>:<port>/CPACache/refresh?mode=full|delta
    In addition to above..
    Go thru following link about Processed XML messages.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9a5c3bab977239e10000000a114084/frameset.htm
    Just add on info.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/6baeae38391a6ee10000000a11466f/frameset.htm
    Hope this helps..
    Regards,
    Moorthy

  • Some ads are not loading on my website.

    Since updating to the latest version of FF, I notice some of my ads are not showing up on my website. I can go to my site in Safari and they load perfectly which leads me to believe it is a FF issue blocking some ads and not others.
    I'm wondering if there is some new feature with the latest FF for Mac or if I need to remove a cookie which is causing this. It seems very random which makes me think FF isn't working with certain kinds of ads.
    Thanks for any suggestions.

    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

  • TS3999 Some calendars are not shown in iCloud

    I use some other calendars (birthday, holidays, etc.) which are shown on my iPhone, but I can not see in iCloud Calendar. Do someone know what is the problem? Thanks!

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

Maybe you are looking for

  • Encoding problem with XSL

    Hi, I have problems when printing the result of processing XML with an XSL that contains locale specific chars. Here is a sample: XML : <?xml version="1.0" encoding="ISO-8859-1"?> <ListePatients> <Patient> <Nom>Zeublouse</Nom> <NomMarital/> <Prinom>A

  • Updating a table binded to a database

    HI, I am using a table binded to a table inside a database. How can the database be updated when a new row is added to the database. I am using the persist command in a separate session EJB to add the new row. thanks Ray

  • Redirec to another directory

    Hi, I need to redirect all incoming traffic to my root folder (e.g., my regular URL), to another folder within the root directory. That is, my root folder will look like - ROOT - site - contact/ - about/ - index.php I need all traffic when a user typ

  • When I try to update iCloud I get error code 2343

    When try to update iCloud on my PC I get error code 2343. Does anyone know what that is or how to fix it. I get the same code when I try to uninstall  from my PC

  • Weird colors after installing SL

    Yesterday I upgraded to SL, on my classic MacBook Pro and colors now look strange to me, it's like they are much darker and much more...uhm...colored. The MBP is attached to a 21" ACD on which I have always used the default color profile that came wi