[SOLVED] Static IP/assigning router IP per box

I am a bit confused about static IP and router IP even after reading some guides from searching. What I would like to do if possible is, I have one server and 2 desktops (one arch one win7) and I would like to assign one 192.168.1.10? IP per each. So for example I want to make sure that my server is always 192.168.1.100, even after a power outage or something, when it restarts its network and tries to get IP from router it is always 192.168.1.100, and no other device connected to the network can possibly take that spot. How exactly do I accomplish this? Is this static IP or a bit different? TIA for any help
Last edited by colbert (2010-02-19 21:07:43)

colbert wrote:
Sorry for image size! Resized hopefully is OK.
vacant wrote:
Change the router "start IP address" from 100 to 150
Then give your Server and PCs the static IPs you want (192.168.1.100 etc)
Okay, how do I do the second part though, how do I give the pc the static IP? Is that this: http://wiki.archlinux.org/index.php/Net … _Static_IP ??
Yes.
For your server 192.168.1.100, assuming a wired interface on eth0, in /etc/rc.conf
#Static IP example
eth0="eth0 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
For your Arch PC do the same but change the IP address to 192.168.1.101
For you Windows PC, something like right click on the network connection, properties, TCP, IPV4, then uncheck "automatic" or DHCP and fill in the IP address as 192.168.1.102, broadcast 192.168.1.255, netmask 255.255.255.0, gateway & DNS 192.168.1.1
Last edited by vacant (2010-02-19 20:06:50)

Similar Messages

(EA4500). With static IP assigned, how to tell of devices are connected?

I've assigned static IPs to all of my network devices.
Logging onto the router, there does not appear to be any way to tell whether any device is connected or not. Is this normal?

Static IP assignments are only done on the device itself. You switch the device from DHCP to static IP and configure everything on the device itself.
DHCP reservation is not a static IP assignment. It's telling the DHCP server to assign a specific IP address to a specific device. The device still runs on DHCP and cannot tell whether the IP address received is the IP address reserved or not. That's something entirely different and not to be confused with static IP.
Linksys routers never showed a complete list of connected devices. As mentioned before, you can only see the list of wireless devices associated. You won't see wired devices with static IP nor DHCP reservation and even the DHCP client list is often incomplete...

Mail smtp using PAT instead of static NAT assigned

All, I am seeing some odd things in relation to how our smtp gateway is sending information out across the Internet. When I do a show xlate it shows that it is using the global PAT of our primary ISP. However, I have a static NAT assigned to it over our second ISP. When emails are sent to external email systems from us, it is showing it coming from our smtp gateway as the global PAT assigned on my primary ISP. Is there any specific way I can watch what's going on when the firewall does a NAT with a specific command on the ASA?

Hi,
I think you may find that routing is what is causing what you are explaining. i.e The destination of the connection you are describing means that the traffic exits via the primary ISP link which (for your mail server) only has a PAT to the firewall interface address.
In order to verify this, you can check the routes manually using the 'sh route' command, or you can trace the path a packet would take through the firewall device using the 'packet-tracer' command, paying specific attention to the last section.

Assigning Value to text box which is in another form

i have got created on form with link buttons, on click of these link buttons it will take me to another page which has got matrix, on double click of this matrix the value should be assigned to a text box in previous page, can any one tell me how to do it. it's very urgent.
Thanks & Regards,
Jayanth

Hi Jayanath,
I am putting a code that I am using to put values between different forms.
You will need to Change the String "FormID" with your own ID that u assigned to the form while creating. Also change "TxtControl" with your textbox ID. This might not be the exact solution to your problem but by manipulating it a little you will be able to do it.
Dim MatrixValue as String
oTextBox = CType(SBO_Application.Forms.Item("FormID").Items.Item("TxtControl").Specific, SAPbouiCOM.EditText)
oTextBox2 = (SAPbouiCom.EditText)oMatrix.Columns.Item("ColumnID").Cells.Item(SelectedRowNo).Specific
OTextBox.Value = OTextBox2.Value
Hope it Helps
Regards
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan
Message was edited by:
Rizwan Hafeez

Static IP Assignment Not Working With Hostname Entry on Client Machines

Hello:
I'm working through the Oreilly OSX Server book to get my server skills up and, hopefully, to prep for the certification exam. I'm running into a weird little problem though. I have gone through the forums here and I've checked other resources for Mac help and nothing matches the problem I've found.
I have the latest versions of everything (10.4.9), I've set up the static IP assignments in the Server Admin application, and everything is assigned as desired so long as I don't have any entry in the DHCP Client ID window in the client's Network Control Panel. If I don't have an ID there the Clients panel in Server Admin doesn't show the connection.
I do plan to do a local DNS as well and I'm suspecting this might be another piece of my uncompleted puzzle but I'm not sure. It just seems terribly weird that a client ID would change a MAC Address specific ip assignment, DNS or not.
I'm also curious, as a secondary and substantially less important issue, is there a way to flush out the DHCP list for clients that are no longer connected?
Thank you for your time.
G4 Tower as Server Mac OS X (10.4.9)

You are correct about an entry in the client ID field disabling static ip assignment. I've no idea why this is as I have not found any relation between this and bootpd's static assignment method (in 'man bootpd' at least).
A local DNS does not seem to affect anything in bootpd. Indeed, you can forget about any thoughts of combining named & bootpd (e.g., getting bootpd to dynamically update ip addresses for hostnames in the dns zone files).
/var/db/dhcpd_leases contains all leases handed out from the dynamic pool. You can safely (in my experience) delete the whole file or individual entries. The IP addresses are stored there even after the lease has expired (hence increasing number of "Current DHCP Clients" in the Overview pane). However, this behaviour of bootpd seems to allow 'virtual' static IPs, even if the lease time is short, as bootpd will still try to re-assign the same IP at every opportunity, using the expired info in this file. From the bootpd man page...
The server tries to give the same address back to a client by remembering
the binding even after it has expired. The server removes an expired
lease entry only when it runs out of addresses, and needs to reclaim an
address in order to fulfill a new request.
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/bootpd.8 .html
Static mappings are stored in the local netinfo database (not dhcpd_leases file) and can be viewed there under 'machines' in Netinfo Manager or with Workgroup Manager's 'All Records' inspector. Bootpd stores most of its own setup info in netinfo and looks there first when an IP address is requested. Which brings us back to your question... why doesn't it find a relevant static mapping in netinfo just because there is something in the client ID field?
-david

OSB: Static Vs Dynamic Routing With "Get All Headers"

Hi
How Static and Dynamic Routing works when calling Business Service pointing to a service inside or out-side the domain with respect to carrying "Get All Headers".
The scenario is
I have two BIZ services of http protocol, B1 pointing to a serive with-in the same domain and B2 pointing to a serivce outside the domain.
Now i am calling both BIZs throught Static and Dynamic Routing
1. Proxy X calls BIZ1 using Static Routing
2. Proxy X calls BIZ1 using Dynamic Routing
3. Proxy X calls BIZ2 using Static Routing
4. Proxy X calls BIZ2 using Dynamic Routing
Question: In all 4 cases, does "Get All Headers" get passed to called service?. How is the behaviour?
Thanks
Venkata Madhu

If you're getting errors like -
ORA-12514: TNS:listener does not currently know of service requested in connect
And you're database has been started you can -
'alter system register'
and that will register the database with the listener.
If you are trying to start up databases remotely you need to have a static entry (listener.ora entry) otherwise you will not be able to connect to the database and will get the above error. I've seen people connect remotely, shutdown the database, try startup and they are not able to. Good way to shoot yourself in the foot.

Account assignment grp as per material type

Hello,
Is anyone of you aware of the settings where I can bring the default material account assignment group as per the Material type in material master.
I think it is not possible by configuration so kindly provide the user exits if any.
Thanks!!!
Regards
Karan

Hi
Have you thought of using Transaction variant through transaction code SHD0,
which is your materrial type is it SAP standard?
you create a transaction variant with your value of acc *** group and you can make it as default.
you can also use for e.g MMR1 for raw material , MMH1 for tranding and so on and change this , but this will only be in case of sap standard material type.
Regards
Jitesh

Number or portals per box

Ok, let me slightly change my questions. Assuming a typical server box (current CPU, enough memory, etc.) is there a practical limit to how many BEA portals you can deploy per box? What I'm really trying to get at is: if each client site needs to be a seperate BEA portal instance, how many of these sites can I host on one box?
thanks,
Chad

Chad,
I see customers application foot prints varying greatly between portal
distributions. Develop your portal application to meet whatever
requirement you have and then use profiling tools to determine the
optimal configuration of the host machine, Weblogic Server, database, etc.
At a minimum follow the docs on supported configurations
http://e-docs.bea.com/platform/suppconfigs/configs81/81_over/overview.html
using the recommended GIG of memory.
Some recommended reading :
WebLogic Server Performance and Tuning
http://e-docs.bea.com/wls/docs81/perform/index.html
Designing Portals for Optimal Performance (8.1.4)
http://e-docs.bea.com/wlp/docs81/taxonomy/index.html
Wily Technology
http://www.wilytech.com/solutions/applicationManagement.html
http://www.wilytech.com/solutions/products/PortalManager_BEA.html
Borland
http://www.borland.com/optimizeit/
-- Jim
Charles Burnette wrote:
Ok, let me slightly change my questions. Assuming a typical server box (current CPU, enough memory, etc.) is there a practical limit to how many BEA portals you can deploy per box? What I'm really trying to get at is: if each client site needs to be a seperate BEA portal instance, how many of these sites can I host on one box?
thanks,
Chad

How to set and static ip_address for a Suse Linux box

Hi.
I've done the following to set an static ip address for my Suse 9 Linux box:
- Take not of inet address value from ifconfig command. ie: (172.17.2.14)
- Change this value in /etc/hosts for my linux box.
Since Suse is configure by default to use DHCP for assigning dinamic ip_addresses i'm not sure whether will lastly be set as a static address. I've rebooted my box and it seems to be OK.
Thanks in advance ...!

/etc/hosts is not configuration file for ethernet interfaces.
Configuration files for ethernet interfaces are stored in /etc/sysconfig/network directory.
For example if you have eth0 device then configuretion for this device is stored in /etc/sysconfig/network/ifcfg-eth0 file.
Important directives:
DEVICE - interface (eth0)
IPADDR - IP address of interface
NETMASK - netmask
BOOTPROTO - "static" for static configuration, dhcp for dynamic configuration via dhcp
ONBOOT - activating interface during boot (yes/no) (yes - of course :-) )
GATEWAY - default gateway
So for example you want setup static IP (192.168.10.1 / 255.255.225.0) for eth0 interface.
Edit the /etc/sysconfig/network/ifcfg-eth0 file and your configuration should be:
DEVICE=eth0
IPADDR=192.168.10.1
NETMASK=255.255.255.0
BOOTPROTO=static
ONBOOT=yesThen you simply restart the nework using:
/etc/init.d/network restartOR
/sbin/ifdown eth0
/sbinf/ifup eth0 OR
ifconfig eth0 down
ifconfig eth0 up

Assigned Backup skills per resource in UCCX 10.5

UCCX System version: 10.5.1.10000-24
CUCM System version: 10.5.1.10000-7
We have a dedicated team of agents who support our enterprise channel support base. In the SLA we provide to the customer, it states each agent will have 2 backup resources, in total 3 resources with knowledge of the customers voice/data plan.
Per the SLA, this is how the call should route
Each resource has their own dedicated toll free number in which the customer can contact them directly. If the resource is not logged in or logged in and not ready, the call will route to the queue and according to the SLA it should route to that resources 1st backup. If the 1st backup isn't available, it should then route to a 2nd backup. If none are available, the call will overflow into the generalized queue for any of the next "longest available" agents to handle it. Right now each resource is assigned their own skill and their own queue, like below.
Resource : Bob Smith
Resource ID : bsmith
Skill: bob_smith
CSQ: bob_smith
Resource config, assigned Skills in RmCM>Resources
bob_smith: comp level 10 "Most Skilled"
jane_doe: comp level 9
jane_smith: comp level 8
All other skills, (if there are any below): comp level 5
At the moment I don't know if this is working correctly. The supervisor edits the resources by clicking on the resource and changing the competency levels of the 1st and 2nd available skills to handle the dedicated resources call if they're not available.
Is assigned backup resource functionality available in UCCX?

Correct, so every agent will be assigned to every personal skill with level 10 for their own skill, level 9 or 8 of other agents' skill depending if they are first or second backup agent.
Again make sure you stay within the guidelines of how many skills/CSQs an agent can be assigned to as if you start having a lot of these this solution will not scale well.
HTH, please rate all useful posts!
Chris

Assigning Material Group per User

Hi SAP Experts! =)
Pls Help! does anybody have an idea how can I assign a Material Group per User. This is for authorization purposes. What I just know, is to Assign just one Material Group per user through Parameter ID MKL. This will only solve my problem if a User will only have access for a Single Material Group.
Do you know a way how to Assign access for Multiple Material Groups? I would want to use this for the PR/PO process, so a User will only purchase Materials under his/her assigned Material Groups. =)
Mik

HI,
Usually we give a star symbol for the authorisation object of material groups means the user is authorised for all the material groups.
In case if you want to give multiple material groups for the user then we have to specify the material groups instaed of the star symbol.
You can check the users authorisaion against the user ID in tcode SUIM.(Users with complex selection)
Thanks & Regards,
Kiran

SRX Using DHCP on UNTRUST (BRANCH)-- Connected to Static VTI Cisco Router (HQ)

Good morning Gentlemen, I need some advice. I am primarily a cisco IOS chap, but have recently been delving into some JUNOS action.
I cannot find an example on the Juniper Forums/Documentation or the Cisco Forums/Documentation to my specific Issue.
Firstly, I am not interested in Policy Based VPNs. I do not know if it is possible to use a DHCP assigned public address on remote device with a "static VTI" - when using IKE identities. However as Phase one is up, I think the issue is more to do with Phase2 proposals when not explicitly defining a Tunnel destination.
In the scenario I am trying to sort now, I have an SRX-100 device, that gets its public address from a DHCP server.
I have back at the HQ, a cisco router.
The Cisco router has various VTI tunnels out to other branch devices, that are smaller Cisco routers. These VTI tunnels are working fine - note all using static Public IP's
I have my phase1 up fine, (from both sides' perspective) and am sending a local-identity hostname instead of a defining a destination address on the Tunnel on the cisco side.
JUNIPER
Index State Initiator cookie Responder cookie Mode Remote Address
5048723 UP 41ee08a4a0fde661 517176fea0f23989 Aggressive 4.4.4.4
CISCO
IPv4 Crypto ISAKMP SA
dst src state conn-id status
4.4.4.4 1.1.1.1 QM_IDLE 1110 ACTIVE NICK-SRX-ISAKMP-PROFILE
A working VTI tunnel has an SA of : (cisco perspecive)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
I have tried sending this as the proxy-id on the Juniper to no avail.
The error is still :
*Jun 6 10:20:07.244: ISAKMP1110):atts are acceptable.
IPSec policy invalidated proposal with error 64
*Jun 6 10:20:07.244: ISAKMP1110): phase 2 SA policy not acceptable!
The IPSEC transform-Set attributes are accepted though,
transform 0, ESP_3DES
*Jun 6 10:20:07.244: ISAKMP: attributes in transform:
*Jun 6 10:20:07.244: ISAKMP: authenticator is HMAC-SHA
*Jun 6 10:20:07.244: ISAKMP: SA life type in seconds
*Jun 6 10:20:07.244: ISAKMP: SA life duration (VPI) of 0x0 0x0 0xE 0x10
*Jun 6 10:20:07.244: ISAKMP: SA life type in kilobytes
*Jun 6 10:20:07.244: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
*Jun 6 10:20:07.244: ISAKMP: encaps is 1 (Tunnel)
*Jun 6 10:20:07.244: ISAKMP1110):atts are acceptable.
So it is something to do with the SA/Proxy ID's being sent.
here is the Juniper Config:
proposal IKE-SHA-AES128-DH2 {
authentication-method pre-shared-keys;
dh-group group2;
authentication-algorithm sha1;
encryption-algorithm aes-128-cbc;
lifetime-seconds 86400;
policy IKE-POLICY-HQ {
mode aggressive;
proposals IKE-SHA-AES128-DH2;
pre-shared-key ascii-text "secretkey";
gateway IKE-GATEWAY {
ike-policy IKE-POLICY-HQ;
address 4.4.4.4;
local-identity hostname knuckles.net;
external-interface fe-0/0/0.0;
proposal HQ-IPSEC-PROPOSAL {
protocol esp;
authentication-algorithm hmac-sha1-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3600;
lifetime-kilobytes 4608000;
policy HQ-IPSEC-POLICY {
proposals HQ-IPSEC-PROPOSAL;
vpn ROUTE-BASED-VPN-TO-HQ {
bind-interface st0.0;
ike {
gateway IKE-GATEWAY;
ipsec-policy HQ-IPSEC-POLICY;
establish-tunnels immediately;
st0 {
unit 0 {
family inet {
address 10.1.1.2/30;
CISCO SIDE:
crypto isakmp policy 2
encr aes
authentication pre-share
group 2
crypto keyring NICK-SRX
pre-shared-key hostname knuckles.net key secretkey
crypto isakmp profile NICK-SRX-ISAKMP-PROFILE
keyring default
keyring NICK-SRX
match identity host knuckles.net
initiate mode aggressive
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile NICK-SRX-IPSEC-PROFILE
set transform-set ESP-3DES-SHA
set isakmp-profile NICK-SRX-ISAKMP-PROFILE
interface Tunnel1
description HQ to NC-SRX
ip address 10.1.1.1 255.255.255.252
tunnel source 4.4.4.4
tunnel mode ipsec ipv4
tunnel destination dynamic
tunnel protection ipsec profile NICK-SRX-IPSEC-PROFILE
FYI - If I use the Provider given DHCP address on the Cisco Tunnel config, as a destination - the tunnel comes up immediately....So ' thinking this may be a limitation of static VTI. I have not tested the IKE identity on a remote cisco router also using VTI yet.
e.g.
interface Tunnel1
description HQ to NC-SRX
ip address 10.1.1.1 255.255.255.252
tunnel source 4.4.4.4
tunnel mode ipsec ipv4
tunnel destination 1.1.1.1
tunnel protection ipsec profile NICK-SRX-IPSEC-PROFILE
So I guess my question is Is this possible using a static VTI?
What does this comand do - does it turn on dynamic VTI (all that virtual-template business)- or just tell the tunnel to expect and IKE identity?
tunnel destination dynamic
Does Dynamic VTI work with Different Vendors, and if so how can you control what VRF is assigned to the tunnels - I will need in the future multiple VRF's for each branch device, some using DHCP public addresses.
The VTI design guide does not mention Identity IKE for branch sites without using dynamic VTI.
I would like to avoid using the whole easyVPN / dynamic VTI, as I need to use multiple VRF;s on the endpoints.

Perhaps this fellow has cracked it - is this the only way ???
https://supportforums.cisco.com/document/58076/dynamic-ip-dynamic-ip-ipsec-vpn-tunnel

Cisco 3700 Access Point static IP assignment

Hello,
Able to access console on the 3700 AP yet unable to find any commands that permit the assignment of a static IP and mask?

It depends on the kind of IOS software currently running on your access-point, below the examples for both autonomous and Controller based.
Autonomous
AP#conf t
AP(config)#int bvI 1
AP(config-if)# ip address <IP> <subnetmask>
AP(config-if)# exit
AP(config)#ip route 0.0.0.0 0.0.0.0 <IP GW>
Controller based
AP#capwap ap ip address <IP> <subnetmask>
AP#capwap ap ip default-gateway <IP GW>
AP#test capwap restart
Optionally to statically configure the WLC to join:
AP#capwap ap controller ip address <Management IP of the WLC>
Please rate useful posts :-)

Static IP after router

I have a security DVR that's hardwired into a WRT54GX4 wireless router. The DVR was given a static IP and I can't access it when I go through the ports of this router. When the router is bypassed, no problems getting in. So how do I get a staic IP to work after the router?

Is the static IP the DVR was assigned in the same network segment as the LAN range of the router?
i.e. if the router LAN IP range is 192.168.1.0/24, does the DVR have an IP address of 192.168.1.something?
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

How do I solve a self-assigned IP address?

Hello all,
Here is the situation: I am currently on the road with a MacBook Pro running 10.6.8 and an iPhone 4 running iOS 5.0.1.
The hotel where I am staying doesn't have WiFi, but does have ethernet cables in all the rooms. My laptop is therefore hooked up to the internet through its ethernet port. No problem there.
Way back when, I used to be able to share that internet connection with my dataless iPhone (I don't use data while travelling internationally as I'm not made of money), but going to System Pref>Sharing and sharing the internet connection, which is incoming through the ethernet port, through the AirPort. One day, it stopped working, reporting that the AirPort has a self-assigned IP address (in the dreaded 169.254.xxx.xxx range) and will not be able to connect to the internet. Hence my iPhone won't get its internet feed. I have looked all over for a solution and haven't been able to find one where the problem was similar to this one; those posts I found dealt with computers trying to hop onto the net directly, not with sharing a net feed.
I would be extremely grateful for a solution.
Many thanks!
Carl

Power cycle your router.

[SOLVED] Static IP/assigning router IP per box

Similar Messages

Maybe you are looking for