[Solved] UTF-8 locale-gen not working

$ cat /etc/locale.conf
Lang=en_CA.UTF-8
$ locale -a
C
POSIX
en_CA.utf8
$ locale
LANG=C
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_PAPER="C"
LC_NAME="C"
LC_ADDRESS="C"
LC_TELEPHONE="C"
LC_MEASUREMENT="C"
LC_IDENTIFICATION="C"
LC_ALL=
$ cat /etc/profile.d/locale.sh
#!/bin/sh
unset LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES \
LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT"LC_IDENTIFICATION
if [ -n "$XDG_CONFIG_HOME" ] && [ -r "XDG_CONFIG_HOME/locale.conf" ]; then
. "$XDG_CONFIG_HOME/locale.conf"
elif [ -n $HOME ] && [ -r $HOME/.config/locale.conf ]; then
. "$HOME/.config/locale.conf"
elif [ -r /etc/locale.conf ]; then
. /etc/locale.conf
elif [ -r /etc/rc.conf ]; then
LANG=$(. /etc/rc.conf 2>/dev/null; echo "$LOCALE")
fi
export LANG="${LANG:-C}"
[ -n "$LC_CTYPE" ] $$ export LC_CTYPE
[ -n "$LC_NUMERIC" ] $$ export LC_NUMERIC
[ -n "$LC_TIME" ] $$ export LC_TIME
[ -n "$LC_COLLATE" ] $$ export LC_COLLATE
[ -n "$LC_MONETARY" ] $$ export LC_MONETARY
[ -n "$LC_MESSAGES" ] $$ export LC_MESSAGES
[ -n "$LC_PAPER" ] $$ export LC_PAPER
[ -n "$LC_NAME" ] $$ export LC_NAME
[ -n "$LC_ADDRESS" ] $$ export LC_ADDRESS
[ -n "$LC_TELEPHONE" ] $$ export LC_TELEPHONE
[ -n "$LC_MEASUREMENT" ] $$ export LC_MEASUREMENT
[ -n "$LC_IDENTIFICATION" ] $$ export LC_IDENTIFICATION
So how to get en_CA.UTF-8 in effect? And why isn't in effect automatically? I installed recently and followed the locale-gen procedure. Only graphical stuff installed is i3, qupzilla & smplayer, no gnome or anything. I guess it's not related, but Dvorak layout is working as per vconsole.conf. Thanks
Last edited by stozi (2013-09-30 14:33:29)

stozi wrote:thanks I have read it, didn't find anything that would help. still want to know how my /etc/locale.conf could have the wrong formating when it's never been manually edited.
Asked and answered.  You need to edit that file - this is described in the Beginners guide and installation guide (edit: and several times on the locale page).
Last edited by Trilby (2013-09-30 14:29:04)

Similar Messages

  • Oracle 10gr2 locally is not working after  installing Oracle 11g

    hi ,
    Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
    Forms session <2> failed during startup: no response from runtime process

    Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

  • Ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6

    ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6?????

    Have you went to Bose's support site?
    Sometimes an iOS update breaks compatibility
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the Bose unit
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem then there is nothing you can do except see it Base has firmware update.

  • Absolute links on hml page in local directory not working

    All the absolute links on my html pages (which are on my hardrive) are being treated as local links and are therefore not working - i.e. Firefox is adding the local file path before the url. For example, the original link is: http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article
    But Firefox is adding the directory path so the url string becomes: /www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article%E2%80%9D
    It is also being appended with: %E2%80%9D (which, when tested from a Word page, leads to site but generates page not found error).
    For testing purposes, is there any way I can reconfigure Firefox to parse my links as absolute?
    Many thanks

    Thanks, both. I have carried out cor-el's suggestion of replacing the smart quotes with dumb quotes, then tried viewing link on file again using different encoading, including UTF-16 - same result as before.
    Below I've set the HTML of the whole page, as per yalam96's request (it includes cor-el's suggested fix to the "prosecute" link):
    <pre><nowiki><h3>Who do you need to inform (in the UK)?</h3>
    <p>If you have a mortgage, you will need to inform your provider (with most lenders this shouldn't be an issue – you do not need “consent to let” as you would if you were letting out the whole property) but you do still need to inform them; why? This is partly for the protection of your lodger, if you should default on the mortgage or die, but mostly for your own protection – if the property was destroyed or badly damaged because of the negligence of your lodger.</p>
    <p>If own your property and it's leasehold, check the lease – you may need permission from the freeholder.</p>
    <p>If you rent your property, you will need to firstly check with your landlord (this applies whether you rent privately or from a public landlord – Local Authority or Housing Association), and get their permission in writing, just as you would with a mortgage provider. Incidently, in the UK, a public landlord is only likely to object to the let if moving a lodger in would mean your home becomes over crowded (e.g. you have a two bed flat and your children would have to share your bedroom). They will also object – they might even <a href=&#x201d;http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article&#x22;>prosecute</a> - if you move out and let the whole property to the “lodger” (who wouldn't be a lodger in that case, but a full tenant, with full tenant's rights).</p>
    <p>You may also need to cancel any existing residential home insurance and take out <a href=”http://www.landlordinsurance.biz/landlord-insurance-guides/landlord-insurance-faq/”>landlord insurance</a>. A few residential policies will, however, allow lodgers. Landlord insurance will not cover the lodger's possessions, they will need to get their own insurance, known as Tenant Insurance – policies can be compared on sites such as <a href=”http://www.confused.com/campaign/home-insurance/tenants-content-insurance?MediaCode=1054&kw=lodger+contents+insurance+broad&gclid=CPbbn9-Nj7MCFanItAod3GAAog”>confused.com</a></p>
    <p>If you get a single occupier's discount on your council tax, you will need to inform your local authority, unless your lodger is <a href=”https://www.gov.uk/council-tax/council-tax-exemptions”>exempt</a> from paying council tax (e.g. they're a university student).</p>
    <p>NB People claiming Jobseeker's Allowance and most other benefit claimants are <b>not</b> exempt – they are, however, usually entitled to Council Tax Benefit to help with some or all the cost of their council tax.</p>
    <p>If you're letting on a Monday – Friday basis (to someone who only needs a week night let), this person would not normally pay council tax at your property, as they already pay against their main (family) home. However, if for whatever reason you and your Monday – Friday lodger decided that they would use your address as their main home, they would then become liable to pay council tax at your address and you would lose any single occupier's discount.</p>
    <p>If you claim any kind of means tested benefit (such as job seeker's allowance, housing benefit or council tax benefit) as benefit rules currently stand (January 2013) your rental income will affect this. <b>Contribution</b> based Job Seeker's allowance (JSA(C)) will be affected if your weekly rental income exceeds £50. If you're on income based jobseeker's allowance (JSA(I)), it's very likely to be affected; however, to what extent will depend on your rental earnings and circumstances and a DWP adjudicator will decide this.</p>
    <p>However, from October 2013, when Universal Credit takes effect in the UK, <a href=”http://www.insidehousing.co.uk/tenancies/lodger-rules-to-ease-impact-of-bedroom-tax/6522846.article?MsgId=57059”>a <b>public housing</b> tenant's income from renting a room will no longer affect their benefit entitlement.</a></p></nowiki></pre>

  • Local printers not working with 2504 WLC

                       I have a 2504  WLC with 3 1262 WAPs in lightweight mode.
         Clients connect using WPA2 PSK AES with no problem.  Clients are Windows XP Home SP3.  Test pages end up in print queue and eventually get a error printing status.  Clients are not part of a domain and in a standalone workgroup - techstream.
    Printer can be pinged from wireless client.
    Another 1262N WAP in standalone mode connected to same lan from windows 7 sp1 clients have no problem printing to a local printer.
    What does work on the Windows XP Home client is connecting to a network shared printer authenticating with domain admin id and password and it works.  Reboot and the network shared printer can not connect multiple reasons are "access is denied" and message box says "only security tab will be displayed....."   Another Windows XP Home SP3 client on reboot can't open the network shared printer with message "Can't find printer"
    The local printers do work on these pc's with an old colubris router that has an outside interface on our lan and internal network with clients getting dhcp address from colubris router of 192.168.3.XXX  . 
    What is wrong with the wireless 2504 WLC?
    Thanks
    Broadcast forwarding was enabled.

    Although a cisco tech support was helpful in making sure multicasting was enabled and a multicast server defined, the problem was at the CP2025DN printer. It had old network ip mask and gateway configured on the printer.
    The new devices were part of the new network configuration (Mask and gateway had changed). I didn’t change that printer when I changed all the other printers at the facility because it was still active thru the old wireless network. I forgot to change the printer ip config when I brought the new wap on the new wireless network with the wlc 2504.
    End result was the clients were part of a different subnet and gateway configuration then the printer and this disrupted the communication between clients and the printer. Once I corrected the mask and gateway on the printer to be the same as the dhcp scope of the wireless network, communication and printing worked.
    Problem solved.  User error

  • [SOLVED] MSI GT70 keyboard buttons not working

    Hi! I am a normal user of computers that like games, so I bought this awesome notebook MSI GT70 i7 16gb ram GTX 675MX 128ssd+750hdd, with a keyboard by steelseries.
    Everything was ok, using the notebook as came when I bought, with OS windows 8, with no format nor modifications by me, using it since January 2013.
    The problem is that about 1 or 2 weeks some shortcuts of keyboard arent working anymore:
    - Wifi button isn't working and isn't becoming orange when pressed, and Fn+F8 isn't working either;
    - Screen shutdown button is becoming orange when pressed but not working;
    - Cd-dvd eject button is becoming orange when pressed but not working;
    - I tried also Fn+F9 and Fn+F12 shortcuts, and I think they arent working either.
    At the same time, the Cooler button and the Backlight's Keyboard button are working correctly. Turbo button maybe is working too but I don't know if something become overclock when I activate it.
    I would really appreciate some help, since I love my notebook very much, and I hope it's not a hard problem to solve.
    Thanks!

    Quote from: flobelix on 10-July-13, 00:47:56
    Try resetting EC: >>How to reset the EC (Embedded Controller)<<
    If that doesN't help uinstall SCM and after reboot install latest version: http://www.msi.com/service/download/utility-19670.html
    Also try updating .Net Framework 4.5: http://www.microsoft.com/en-us/download/details.aspx?id=36377
    Hi,
    I followed your advice:
    1. uninstalled SCM, restarted
    2. installed SCM, restarted
    3. tried to update .net framework, had it already
    4. resat the EC
    But unfortunately it did not change my GE60 2OC's behaviour: when i press the back-light button it opens my browser with dragoonarmy/msi.com>/ BUT NO LIGHT.
    Do anybody have a suggestion to solve this??
    Thanks Kurt

  • Local Printer not working via Remote Link

    I have a problem with my remote desktop printing to my local printer.  I connect via RD on Windows 7 Home to Windows 7 Pro.  I have installed an HP Laserjet Pro CM1415fn printer.  All prints fine locally.  Also everything printed fine
    but have had to have a recent update to my Remote PC that I log into.  So the printer had to be reinstalled.
    All worked ok for about 6 print jobs then stopped working.  Nothing has changed.  I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode.  I have tried restarting the Printer Spooler in Services
    and rebooting the remote PC but no joy.
    Any ideas please.

    Hi,
    You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
    Take a try with the printer troubleshooter:
    Open the Printer troubleshooter
    Also see if the below thread could help:
    Local Printing with
    Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
    Best regards
    Michael Shao
    TechNet Community Support

  • [SOLVED] Suspend to ram / disk not working in newer kernels

    Hi all,
    this puzzles me for a while:
    My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
    I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
    When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
    echo mem > /sys/power/state
    which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
    1. lspci output
    harvey@obelix ~ $ lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
    00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
    01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
    02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
    03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
    03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
    3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
    3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
    3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
    3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
    3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
    3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
    3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
    3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
    3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
    3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
    3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
    3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
    3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
    3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
    2. lsmod output of 2012.07.17_04-00-01:
    harvey@obelix ~ $ lsmod
    Module Size Used by
    fuse 68768 0
    tun 15297 0
    rfcomm 33627 8
    bnep 8793 2
    nfsd 246714 2
    exportfs 3665 1 nfsd
    btusb 11764 0
    joydev 9991 0
    bluetooth 190551 22 bnep,btusb,rfcomm
    rfkill 15604 2 bluetooth
    snd_hda_codec_realtek 60409 1
    snd_hda_intel 24053 3
    snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
    microcode 12185 0
    i7core_edac 17477 0
    snd_hwdep 6300 1 snd_hda_codec
    i2c_i801 8180 0
    iTCO_wdt 12813 0
    snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
    r8169 49386 0
    coretemp 5654 0
    edac_core 36656 3 i7core_edac
    iTCO_vendor_support 1929 1 iTCO_wdt
    serio_raw 4653 0
    pcspkr 1899 0
    snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
    snd_timer 18966 1 snd_pcm
    mii 4123 1 r8169
    snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5410 1 snd
    acpi_cpufreq 5933 0
    mperf 1235 1 acpi_cpufreq
    evdev 9754 4
    processor 26567 1 acpi_cpufreq
    vboxnetadp 18387 0
    vboxnetflt 16743 0
    vboxdrv 1791382 2 vboxnetadp,vboxnetflt
    nfs 276056 1
    nfs_acl 2359 2 nfs,nfsd
    lockd 62987 2 nfs,nfsd
    auth_rpcgss 32327 2 nfs,nfsd
    sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
    fscache 41059 1 nfs
    aes_x86_64 7508 64
    cryptd 8741 0
    aes_generic 26138 1 aes_x86_64
    xts 3101 32
    gf128mul 6050 1 xts
    dm_crypt 16496 4
    dm_mod 70918 9 dm_crypt
    sr_mod 14823 0
    cdrom 35648 1 sr_mod
    hid_logitech 16560 0
    ff_memless 4690 1 hid_logitech
    usbhid 36430 1 hid_logitech
    hid 85285 2 hid_logitech,usbhid
    sd_mod 29239 7
    pata_jmicron 2480 0
    usb_storage 44760 0
    pata_acpi 3408 0
    ata_piix 23160 5
    crc32c_intel 1987 0
    ahci 20549 0
    libahci 20023 1 ahci
    ata_generic 3295 0
    libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
    scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
    uhci_hcd 23372 0
    xhci_hcd 81440 0
    ehci_hcd 40994 0
    usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
    usb_common 954 1 usbcore
    floppy 58615 0
    nouveau 784289 3
    button 4502 1 nouveau
    video 11307 1 nouveau
    mxm_wmi 1425 1 nouveau
    wmi 8475 2 mxm_wmi,nouveau
    i2c_algo_bit 5391 1 nouveau
    drm_kms_helper 33051 1 nouveau
    ttm 64288 1 nouveau
    drm 208926 5 ttm,drm_kms_helper,nouveau
    i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
    ext4 424175 4
    crc16 1359 2 ext4,bluetooth
    jbd2 73919 1 ext4
    mbcache 5977 1 ext4
    3. /var/log/pm-suspend.log of a not working suspend
    Initial commandline parameters:
    Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
    Module Size Used by
    rfcomm 33627 8
    bnep 8793 2
    nfsd 246714 2
    exportfs 3665 1 nfsd
    ext4 424175 3
    jbd2 73919 1 ext4
    mbcache 5977 1 ext4
    btusb 11764 0
    bluetooth 190551 22 bnep,btusb,rfcomm
    crc16 1359 2 ext4,bluetooth
    joydev 9991 0
    rfkill 15604 2 bluetooth
    snd_hda_codec_realtek 60409 1
    microcode 12185 0
    coretemp 5654 0
    serio_raw 4653 0
    snd_hda_intel 24053 5
    snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
    pcspkr 1899 0
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    r8169 49386 0
    i7core_edac 17477 0
    snd_timer 18966 1 snd_pcm
    edac_core 36656 3 i7core_edac
    mii 4123 1 r8169
    snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
    iTCO_wdt 12813 0
    i2c_i801 8180 0
    soundcore 5410 1 snd
    iTCO_vendor_support 1929 1 iTCO_wdt
    acpi_cpufreq 5933 0
    mperf 1267 1 acpi_cpufreq
    evdev 9754 4
    processor 26567 1 acpi_cpufreq
    vboxnetadp 18387 0
    vboxnetflt 16743 0
    vboxdrv 1791382 2 vboxnetadp,vboxnetflt
    nfs 276056 1
    nfs_acl 2359 2 nfs,nfsd
    lockd 62987 2 nfs,nfsd
    auth_rpcgss 32327 2 nfs,nfsd
    sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
    fscache 41059 1 nfs
    btrfs 710578 1
    libcrc32c 1002 1 btrfs
    zlib_deflate 20436 1 btrfs
    aes_x86_64 7508 64
    cryptd 8741 0
    aes_generic 26138 1 aes_x86_64
    xts 3101 32
    gf128mul 6050 1 xts
    hid_logitech 16560 0
    ff_memless 4690 1 hid_logitech
    dm_crypt 16496 4
    dm_mod 70918 9 dm_crypt
    sr_mod 14823 0
    cdrom 35648 1 sr_mod
    usbhid 36430 1 hid_logitech
    usb_storage 44760 0
    hid 85285 2 hid_logitech,usbhid
    sd_mod 29239 7
    pata_jmicron 2480 0
    pata_acpi 3408 0
    ata_piix 23160 5
    ata_generic 3295 0
    uhci_hcd 23404 0
    crc32c_intel 1987 1
    ahci 20549 0
    libahci 20023 1 ahci
    libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
    xhci_hcd 81472 0
    ehci_hcd 41026 0
    scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
    usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
    usb_common 954 1 usbcore
    floppy 58615 0
    nouveau 784321 3
    button 4502 1 nouveau
    video 11307 1 nouveau
    mxm_wmi 1425 1 nouveau
    wmi 8475 2 mxm_wmi,nouveau
    i2c_algo_bit 5391 1 nouveau
    drm_kms_helper 33051 1 nouveau
    ttm 64320 1 nouveau
    drm 208958 5 ttm,drm_kms_helper,nouveau
    i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
    total used free shared buffers cached
    Mem: 8173500 884060 7289440 0 3764 405872
    -/+ buffers/cache: 474424 7699076
    Swap: 8386556 0 8386556
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /etc/pm/sleep.d/90alsa suspend suspend:
    /etc/pm/sleep.d/90alsa suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Tue Jul 17 11:21:18 CEST 2012: performing suspend
    This seems to be a kernel bug. Any input?
    Harvey
    Last edited by Harey (2012-08-06 13:51:49)

    Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
    BUSES="0000:00:1a.7 0000:00:1d.7"
    case "${1}" in
    hibernate|suspend)
    # Switch USB buses off
    for bus in $BUSES; do
    echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
    done
    resume|thaw)
    # Switch USB buses back on
    for bus in $BUSES; do
    echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
    done
    esac
    The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
    When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
    Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
    I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
    EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
    Harvey
    Last edited by Harey (2012-08-06 13:52:51)

  • [Solved] ar9170usb loaded but WIFI not working

    Hi,
    I bought today my new USB WIFI adapter (TP-Link TL-WN822N), but its not working.
    ar9170usb module is loaded correctly, but wlan0 doesnt.
    dmesg| grep ar9170usb
    [ 3.007214] usbcore: registered new interface driver ar9170usb
    lsmod | grep ar9170usb
    ar9170usb 49413 0
    mac80211 211662 5 ar9170usb,carl9170,rt2800lib,rt2x00usb,rt2x00lib
    ath 14355 2 ar9170usb,carl9170
    cfg80211 146369 5 ar9170usb,carl9170,rt2x00lib,mac80211,ath
    usbcore 142192 9 ar9170usb,carl9170,rt2800usb,rt2x00usb,rt2870sta,usbhid,xhci_hcd,ehci_hcd
    lsusb
    Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
    Any ideas?
    Last edited by nexxx (2011-08-08 07:23:16)

    Solved my problem by blacklisting "carl9170", so only "ar9170usb" module is loaded.
    Blacklisting "ar9170usb" did not work here!
    Thanks
    EDIT:
    After update to Kernel 3.0 the ar9170usb module was removed. Now its not working anymore.
    When i load the carl9170 module,  it says
    [    2.979833] usb 3-1: firmware not found.
    Do I need any additional firmware?
    Last edited by nexxx (2011-08-08 07:19:49)

  • Maverick Local Host Not Working Correctly

    Hello,
    I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
    Also
    * Web sharing is on
    *PHP is enabled
    *Mysql is running
    Did I mis something?
    Thanks JR

    Hello,
    I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
    Also
    * Web sharing is on
    *PHP is enabled
    *Mysql is running
    Did I mis something?
    Thanks JR

  • NAC appliance local authentication not working

    Hi,
    i am trying a test scenario for NAC. it is oob virtual gateway
    I get the login page when i try to access the web but when i try to authenticate to the local db i don;t receive an error message and i remain on the authentication screen.
    I listened with tcpdump on both interfaces. on the untrusted side i see traffic but on the trusted side no diffrence in traffic appears(but maybe this is normal)
    can someone please help with the detailed steps the authentication follows
    not just host->nas->nam(localdb)
    or some ideas
    Thank you!

    I doubt this will help, but here goes. I seem to remember a similar issue here, and I went into my browser's proxy settings and turned them off. Then I could authenticate, but not browse the web. So after authenticating I turned them back on and it was fine. There is a tab on the NAC Device Management > Clean Access Servers > >Advanced> Proxy where you can tell clean access about a proxy server, but I don't know if that's relevant.
    I assume you have verified that your local user ID works by testing the auth server with it and that it has a profile that allows you to go someplace.

  • Ipod 6th gen not working

    Hi there, I bought an ipod 6th gen just over a year ago, while using it, I noticed the screen get grainy just before my battery went low.  Now the screen is black and wont charge.  I am wondering if it is the battery or the ipod itself.  I never dropped the ipod or abused it anyway, I dont really want to buy another one, if this is going to happen, has anyone else had this happen, or know what the problem is?

    jeffreyfromottawa wrote:
    ipod 6th gen nano frozen, reset not working, help steps on web site no help?
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • [SOLVED] Hybridgraphics: acpi_call after Kernelupgrade not working

    Hi,
    after upgrading from Kernel 3.14.6 to 3.15.1, deactivating the my Nvidia Optimus GT730M by using acpi_call seems not to work anymore. Calling the parameters which worked until now seems to succeed:
    bla$ sudo sh -c './gpuOff.sh && cat /proc/acpi/call'
    0x0called
    But neither I was able to observe any changes of the battery state nor the output of lspci has changed. As far as I can gather, there should be something like "rev ff" indicating a deactivated card?!
    bla$ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    02:00.0 VGA compatible controller: NVIDIA Corporation GK208M [GeForce GT 730M] (rev a1)
    Acpi_call is up2date and compiled with current Headers.
    Maybe I'm missing something?
    Last edited by bl0b (2014-07-11 12:06:33)

    Sorry ^^
    The script simply contains the parameters for deactivating the NVIDIA card of my t440p.
    #!/bin/bash
    echo "\_SB.PCI0.PEG.VID._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x1A {0x1,0x0,0x0,0x3}" >/proc/acpi/call
    echo "\_SB.PCI0.PEG.VID._PS3" >/proc/acpi/call
    exit 0
    I have checked both lines and both commands succeed, at least according to /proc/acpi/call.
    PS:
    Using bumblebee/bbswitch is not working for me since it causes data corruption
    Last edited by bl0b (2014-06-19 15:35:35)

  • [SOLVED] Brightness control over keyboard not working, but it works...

    Hello,
    I recently got a new laptop at work and I put a fresh Arch on it.
    Almost everything works perfectly, but I have one weird issue.
    I can control backlight of my display via ACPI; I wrote a simple script for it:
    pabre@pbr-laptok:~$ cat /usr/local/sbin/brightness.sh
    #!/bin/bash
    DEV=/sys/class/backlight/intel_backlight/brightness
    MAX=`cat /sys/class/backlight/intel_backlight/max_brightness`
    ACT=`cat /sys/class/backlight/intel_backlight/actual_brightness`
    MIN=0
    STEPS=10
    STEP=$((MAX/STEPS))
    if [ $1 == "+" ]; then
    if [ $((ACT+STEP)) -le $MAX ]; then
    echo $((ACT+STEP)) > $DEV
    fi
    elif [ $1 == "-" ]; then
    if [ $((ACT-STEP)) -ge $MIN ]; then
    echo $((ACT-STEP)) > $DEV
    fi
    fi
    exit 0
    I put myself a sudoers entry for it:
    root@pbr-laptok:~# cat /etc/sudoers | grep pabre
    pabre ALL=(ALL) NOPASSWD: /usr/local/sbin/brightness.sh,/usr/bin/pacman -Sy
    And it works like a charm, when run from a terminal:
    pabre@pbr-laptok:~$ sudo /usr/local/sbin/brightness.sh -
    So, my next step was to bind that script to appropriate keys on my keyboard (Fn + UP/DOWN - which are XF86MonBrightnessUp and XF86MonBrightnessDown)
    My window manager is Awesome, so I put to the config:
    awful.key({ }, "XF86MonBrightnessUp", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh +") end),
    awful.key({ }, "XF86MonBrightnessDown", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh -") end),
    among others like touchpad toggling, volume control, etc (which are working without issues)
    And now, guess what... Those keys fire that script, change the brightness and after second or less - it comes back to old value! You can see that display blinks (for example gets brighter and moment after - it goes back to previous state).
    I tried to debug it, putting to the script something like:
    if [ $1 == "+" ]; then
    if [ $((ACT+STEP)) -le $MAX ]; then
    echo $((ACT+STEP)) > $DEV
    cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
    sleep 1
    cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
    fi
    And the first entry was that what it was supposed to be, while te other (second after) Was again the old value.
    Does anybody have any idea what "reverts" my changes to the /sys/class/backlight/intel_backlight/brightness and why it works without issues when simply run from a terminal?
    Last edited by PaBre (2014-03-16 17:10:54)

    I think that I've found partial answer.
    When I changed key binds to another keys - it works!
    But even then, when I press XF86MonBrightnessUp or XF86MonBrightnessDown, the brightness level gets reset. And now they are not bind to anything (at last not explicit).
    So it looks that I have to found how to decouple the internal, not working as expected, bind to these keys.

  • [solved] urxvt terminal: Bitmap fonts not working

    Hello
    I can't get bitmap fonts to work with urxtv (aka rxvt-unicode).
    Here's output of fc-list : file -command
    $ fc-list : file
    Fontconfig warning: "/etc/fonts/conf.d/53-monospace-lcd-filter.conf", line 10: Having multiple values in <test> isn't supported and may not work as expected
    /usr/share/fonts/TTF/DejaVuSerif-BoldItalic.ttf:
    /usr/share/fonts/Type1/a010015l.pfb:
    /usr/share/fonts/TTF/comic.ttf:
    /usr/share/fonts/Type1/n019043l.pfb:
    /usr/share/fonts/TTF/DejaVuSans-ExtraLight.ttf:
    /usr/share/fonts/Type1/n019044l.pfb:
    /usr/share/fonts/TTF/DroidSansArmenian.ttf:
    /usr/share/fonts/TTF/times.ttf:
    /usr/share/fonts/TTF/DroidSansEthiopic-Regular.ttf:
    /usr/share/fonts/TTF/DejaVuSerif-Bold.ttf:
    /usr/share/fonts/Type1/n022003l.pfb:
    /usr/share/fonts/Type1/n022004l.pfb:
    /usr/share/fonts/TTF/arial.ttf:
    /usr/share/fonts/TTF/DroidSansHebrew-Regular.ttf:
    /usr/share/fonts/Type1/n021023l.pfb:
    /usr/share/fonts/Type1/n021024l.pfb:
    /usr/share/fonts/TTF/ariblk.ttf:
    /usr/share/fonts/Type1/n019023l.pfb:
    /usr/share/fonts/TTF/DroidSansFallbackLegacy.ttf:
    /usr/share/fonts/Type1/n022023l.pfb:
    /usr/share/fonts/TTF/verdana.ttf:
    /usr/share/fonts/Type1/n022024l.pfb:
    /usr/share/fonts/Type1/n019024l.pfb:
    /usr/share/fonts/TTF/TerminusBold.ttf:
    /usr/share/fonts/cantarell/Cantarell-Bold.otf:
    /usr/share/fonts/TTF/DejaVuSansCondensed.ttf:
    /usr/share/fonts/TTF/timesi.ttf:
    /usr/share/fonts/TTF/DroidKufi-Bold.ttf:
    /usr/share/fonts/TTF/VeraMoBI.ttf:
    /usr/share/fonts/TTF/DejaVuSansMono-BoldOblique.ttf:
    /usr/share/fonts/TTF/DroidKufi-Regular.ttf:
    /usr/share/fonts/Type1/n021003l.pfb:
    /usr/share/fonts/Type1/n021004l.pfb:
    /usr/share/fonts/TTF/andalemo.ttf:
    /usr/share/fonts/TTF/DroidSansHebrew-Bold.ttf:
    /usr/share/fonts/TTF/Ubuntu-B.ttf:
    /usr/share/fonts/TTF/Ubuntu-R.ttf:
    /usr/share/fonts/Type1/n019003l.pfb:
    /usr/share/fonts/TTF/Ubuntu-C.ttf:
    /usr/share/fonts/TTF/VeraMoBd.ttf:
    /usr/share/fonts/TTF/TerminusMediumItalic.ttf:
    /usr/share/fonts/TTF/DejaVuSerifCondensed-BoldItalic.ttf:
    /usr/share/fonts/TTF/DejaVuSerif-Italic.ttf:
    /usr/share/fonts/Type1/n019004l.pfb:
    /usr/share/fonts/TTF/VeraMoIt.ttf:
    /usr/share/fonts/TTF/DejaVuSansMono.ttf:
    /usr/share/fonts/TTF/DroidSansGeorgian.ttf:
    /usr/share/fonts/TTF/DroidSansEthiopic-Bold.ttf:
    /usr/share/fonts/TTF/Ubuntu-L.ttf:
    /usr/share/fonts/TTF/DroidSansJapanese.ttf:
    /usr/share/fonts/TTF/TerminusMedium.ttf:
    /usr/share/fonts/TTF/DejaVuSans-BoldOblique.ttf:
    /usr/share/fonts/TTF/VeraMono.ttf:
    /usr/share/fonts/TTF/DejaVuSansCondensed-Oblique.ttf:
    /usr/share/fonts/TTF/DroidNaskh-Regular.ttf:
    /usr/share/fonts/TTF/DejaVuSans.ttf:
    /usr/share/fonts/TTF/cour.ttf:
    /usr/share/fonts/TTF/georgia.ttf:
    /usr/share/fonts/TTF/DejaVuSansCondensed-Bold.ttf:
    /usr/share/fonts/TTF/VeraSe.ttf:
    /usr/share/fonts/TTF/UbuntuMono-BI.ttf:
    /usr/share/fonts/TTF/DroidSerif-BoldItalic.ttf:
    /usr/share/fonts/Type1/c059036l.pfb:
    /usr/share/fonts/TTF/VeraSeBd.ttf:
    /usr/share/fonts/TTF/DroidSans-Bold.ttf:
    /usr/share/fonts/Type1/c059033l.pfb:
    /usr/share/fonts/TTF/Ubuntu-RI.ttf:
    /usr/share/fonts/TTF/DejaVuSansMono-Oblique.ttf:
    /usr/share/fonts/cantarell/Cantarell-Regular.otf:
    /usr/share/fonts/TTF/VeraBI.ttf:
    /usr/share/fonts/TTF/DroidSansTamil-Regular.ttf:
    /usr/share/fonts/TTF/VeraIt.ttf:
    /usr/share/fonts/TTF/DroidSerif-Regular.ttf:
    /usr/share/fonts/TTF/DroidNaskh-Regular-SystemUI.ttf:
    /usr/share/fonts/Type1/d050000l.pfb:
    /usr/share/fonts/TTF/VeraBd.ttf:
    /usr/share/fonts/TTF/DroidSans.ttf:
    /usr/share/fonts/TTF/UbuntuMono-RI.ttf:
    /usr/share/fonts/Type1/c059016l.pfb:
    /usr/share/fonts/Type1/s050000l.pfb:
    /usr/share/fonts/TTF/verdanai.ttf:
    /usr/share/fonts/TTF/verdanaz.ttf:
    /usr/share/fonts/Type1/c059013l.pfb:
    /usr/share/fonts/TTF/Ubuntu-BI.ttf:
    /usr/share/fonts/TTF/verdanab.ttf:
    /usr/share/fonts/TTF/trebucit.ttf:
    /usr/share/fonts/TTF/DejaVuSerifCondensed-Italic.ttf:
    /usr/share/fonts/TTF/Ubuntu-LI.ttf:
    /usr/share/fonts/TTF/DejaVuSans-Bold.ttf:
    /usr/share/fonts/TTF/DejaVuSerif.ttf:
    /usr/share/fonts/TTF/georgiai.ttf:
    /usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf:
    /usr/share/fonts/TTF/DroidSansThai.ttf:
    /usr/share/fonts/TTF/trebucbd.ttf:
    /usr/share/fonts/TTF/DejaVuSerifCondensed.ttf:
    /usr/share/fonts/TTF/couri.ttf:
    /usr/share/fonts/TTF/georgiab.ttf:
    /usr/share/fonts/Type1/b018032l.pfb:
    /usr/share/fonts/TTF/DroidNaskh-Bold.ttf:
    /usr/share/fonts/TTF/georgiaz.ttf:
    /usr/share/fonts/TTF/timesbi.ttf:
    /usr/share/fonts/TTF/arialbd.ttf:
    /usr/share/fonts/Type1/b018035l.pfb:
    /usr/share/fonts/TTF/UbuntuMono-B.ttf:
    /usr/share/fonts/TTF/trebucbi.ttf:
    /usr/share/fonts/TTF/UbuntuMono-R.ttf:
    /usr/share/fonts/TTF/arialbi.ttf:
    /usr/share/fonts/TTF/DroidSansArabic.ttf:
    /usr/share/fonts/TTF/timesbd.ttf:
    /usr/share/fonts/TTF/DroidSerif-Bold.ttf:
    /usr/share/fonts/TTF/DroidSansDevanagari-Regular.ttf:
    /usr/share/fonts/TTF/DejaVuSansCondensed-BoldOblique.ttf:
    /usr/share/fonts/Type1/z003034l.pfb:
    /usr/share/fonts/TTF/DroidSansFallback.ttf:
    /usr/share/fonts/TTF/courbi.ttf:
    /usr/share/fonts/TTF/comicbd.ttf:
    /usr/share/fonts/Type1/b018012l.pfb:
    /usr/share/fonts/Type1/p052004l.pfb:
    /usr/share/fonts/TTF/DroidSerif-Italic.ttf:
    /usr/share/fonts/TTF/webdings.ttf:
    /usr/share/fonts/Type1/b018015l.pfb:
    /usr/share/fonts/Type1/a010033l.pfb:
    /usr/share/fonts/TTF/DroidSansTamil-Bold.ttf:
    /usr/share/fonts/Type1/p052003l.pfb:
    /usr/share/fonts/Type1/a010035l.pfb:
    /usr/share/fonts/TTF/DejaVuSerifCondensed-Bold.ttf:
    /usr/share/fonts/Type1/n019063l.pfb:
    /usr/share/fonts/TTF/trebuc.ttf:
    /usr/share/fonts/TTF/courbd.ttf:
    /usr/share/fonts/Type1/n019064l.pfb:
    /usr/share/fonts/TTF/Vera.ttf:
    /usr/share/fonts/TTF/DroidSansMono.ttf:
    /usr/share/fonts/Type1/p052024l.pfb:
    /usr/share/fonts/TTF/impact.ttf:
    /usr/share/fonts/TTF/ariali.ttf:
    /usr/share/fonts/TTF/DejaVuSans-Oblique.ttf:
    /usr/share/fonts/Type1/a010013l.pfb:
    /usr/share/fonts/TTF/DroidSansFallbackFull.ttf:
    /usr/share/fonts/Type1/p052023l.pfb:
    What I've read, there should be /usr/share/fonts/local/* too in that list.
    I run my window manager, dwm with startx and ~/.xinitrc has these lines before dwm:
    xset +fp /usr/share/fonts/local
    xset fp rehash
    I have also tried to include those with xorg.conf:
    $ cat /etc/X11/xorg.conf
    Section "Files"
    FontPath "/usr/share/fonts/local/"
    EndSection
    I'm using Ubuntu's patched versions of freetype, fontconfig and cairo if that has anything to do with my problem:
    freetype2-ubuntu fontconfig-ubuntu cairo-ubuntu
    Xft fonts work fine with urxvt, but bitmaps don't. What am I missing?
    Last edited by NAND (2013-01-29 16:13:00)

    There isn't a "tamsynu" family in the tamsyn-font package.  You're trying to use a font that doesn't exist on your machine.
    $ xlsfonts -fn "-*-tamsynu-*"
    xlsfonts: pattern "-*-tamsynu-*" unmatched
    $ xlsfonts -fn "-*-tamsyn-*"
    -misc-tamsyn-bold-r-normal--0-0-100-100-c-0-iso8859-1
    -misc-tamsyn-bold-r-normal--12-87-100-100-c-60-iso8859-1
    << And more >>
    The syntax for the resource is fine, but it is case-sensitive.  The class is 'URxvt', an instance would be 'urxvt'.
    This should be good for a first attempt at the proper size:
    urxvt.font: -misc-tamsyn-medium-r-normal--14-101-100-100-c-70-iso8859-1
    urxvt.boldFont: -misc-tamsyn-bold-r-normal--14-101-100-100-c-70-iso8859-1
    That's about equal to DejaVu Sans Mono at 8 points.
    If you have rebuilt your font cache, either by restarting X or running 'fc-cache -f', and you want to use Xft, then this is equivalent (Tamsyn does not use anti-aliasing):
    urxvt.font: xft:Tamsyn:style=Regular:size=10.1
    urxvt.boldFont: xft:Tamsyn:style=Bold:size=10.1

Maybe you are looking for

  • How do I transfer my iweb to another computer

    I have a new MacBook Air and need to transfer my iWeb pages. I can't seem to publish them from my MacBook Pro. What can I do?

  • External PC Hard Drive won't show up on my Mac

    My friend copied a bunch of files on his home PC to his external USB Hard Drive. I plugged it in to my USB hub, turned it on, but my Mac won't recognize the drive. It doesn't show anything. How do I get it to see this drive so I can pull the files of

  • Converting eps to pdf in Preview

    I have a large quantity of eps files that I would prefer to be in a much more useful and accessible format. In tests that I have made, I have found that Preview is not only very fast at converting the eps files to pdfs, it also crops them to their bo

  • Ldconfig: File /usr/lib/libnotify.so is empty, not checked. power down

    Hello During installation of gnome and gnome-extra  i have a  power  down in whole house. when its back up i try to install packages and here is a problem now. [2013-05-20 12:05] [PACMAN] installed libsecret (0.15-1) [2013-05-20 12:05] [PACMAN] insta

  • How do i get my ipod back working

    how do i get my ipod back working withmy computer the usb is working in my ipod is just its not connecting i download over 500 songs i really need the music on my device