[SOLVED] WINE and NVIDIA issues - scrolling away from fullscreen

Hello again... more problems from me.
I seem to have a problem with my WINE running fullscreen applications, such as games. When I start, say, a fullscreen game, it does start in fullscreen, but if I move my mouse to the right or bottom edge of the screen, the game screen "scrolls away", and I'm shown my desktop (at a lower resolution). When I pull my mouse/touchpad back to the left or upper edge, the screen returns.
I'd love to post screenshots of this, but those show nothing useful
(which leads me to a suspicion there might me something wrong with my display configuration - but this is only a suspicion.)
It happens regardless of Compiz or any other window manager, and regardless of the "Graphics" settings in winecfg. This is only the case with WINE; I've tried some native fullscreen games, which work flawlessly.
This is really annoying, as it renders most of the games unplayable.
I have an NVIDIA GeForce 9600M GT graphics card, and am running the 64-bit Arch Linux. Here's my xorg.conf and my Xorg.0.log.
I'd be very grateful if someone could help me with this. Thanks!
Last edited by Wintershade (2009-08-20 19:58:14)

there was also a workaround I came to, but it was a messy one compared to this. the idea was to make a batch script for every game I would install, which would first call the xrandr <resolution>, then wine the game, and after that xrandr back to my desktop resolution. needless to say I had this as a last resort, since this would mess up changing the ingame resolution, and don't even get me started about the mess it makes on the desktop

Similar Messages

  • [SOLVED]Wine and nvidia-96xx

    Hi. Just switched to arch from Debian, loving it so far. First major problem I ran into is, of course, wine related.
    Trying to get Diablo 2 running in wine. I have an ancient nVidia Geforce 4 Ti 4800 card in my machine, because I couldn't get my (slightly newer, but still ancient) ATI Radeon X1650 running in Debian. Had no problem with the nVidia card on Debian with the same wine version.
    Error: API mismatch: the NVIDIA kernel module has version 96.43.14, but this NVIDIA driver
    component has version 190.42. Please make sure that the kernel module and all NVIDIA
    driver components have the same version.
    I've browsed the repos and AUR looking for a legacy version of lib32-nvidia, googled some, but no solution as yet. Am I going to have to go with open source drivers or build my own drivers, or is there a nice simple solution to this?
    Oh, almost forgot, I'm running 2.6.31-ARCH x86_64.
    EDIT: Solved this. Made a lib32-nvidia-utils-96xx which I uploaded to AUR if anyone else needs it.
    Last edited by Xlator (2009-11-16 15:50:06)

    Cracked it. For whatever ridiculous reason, wine didn't want to run apps off my other hard drive, whether I symlinked the D2 dir or mounted it. Copying Diablo 2 to the drive where I have arch installed solved the problem. Guess I'll file a bug with wine. Now to erase Debian from my life (well, almost, it's still running on my server ). Thanks for all the help guys!

  • I want to access my library on my macbook pro and copy work done away from home from my imac how do I do this?

    I want to access my library on my macbook pro and copy work done away from home to Aperture on my imac how do I do this?

    Are you working on images on both machines?
    If you want to round-trip images, you can export a project as a library from your iMac, copy that to your MacBook Pro, and then edit the images there.  When you're done, copy that library back to the iMac and import it to your iMac.  The iMac should recognize the changes you've made and update its images.
    Read the Aperture help file, which will guide you to the Aperture manual.  It can walk you through this.  You have to be careful to do it correctly, but I've done this a few times and it works quite well.

  • I am only able to receive e-mails at home and cannot receive them away from home

    I am only able to receive e-mails at home and cannot receive them away from home.  Not being a technical person some "simple" suggestions would be appreciated.

    How many other places/networks have you tried? Maybe those places you tried are blocking the port/site.
    Have you tried contacting your email providers support site?

  • [SOLVED] WINE and Eve Online

    First off, I am not using 64bit.
    Lately, running Wine and Eve-Online is fine.
    However, when I Quit from the game menu...it freezes.
    I actually have to x-it-out (the wine window), and a window pops up with
    "A simulated logout was in the process and is not responding".. or some such thing
    and then I can terminate it and get my desktop back.
    I've seen several posts about this, but no resolve.
    Last edited by Kilzool (2014-07-13 09:58:09)

    andrewd18 wrote:
    Sekre wrote:
    Did you try the aur package, I suggested earlier?
    aur/wine-d3dstream-git
    I compiled this again two-three days ago, and am seeing good effect in EVE in particular, with an nVidia 660, both with and without bumblebee.
    I use PlayOnLinux to manage my WINE prefixes. It turns out the 1.7.18-CS-0.8-f1cf438 build is a build of the HEAD of that repository. So I switched to that WINE version, and yes, the problem is solved.
    I also created a CSMT-enabling registry key. To do so, launch regedit, browse to HKEY_CURRENT_USER/Software/Wine/Direct3D, right click and select New > String Value “CSMT”. Then, double click and set the string to “enabled”.
    Thank you!
    Neat!
    Then the million isk question is, "Why does the CSMT build not display this issue?"
    I just might have to put on my scuba gear and go diving into this some more when the schedule permits.

  • Wine and resolution issue

    hello!
    i have used archlinux for a year or so. everything went quite perfectly, but because archlinux is not multilib (i need it for my 32-bit blitzmax application) i installed gentoo last week. and because gentoo did not get me "that feeling" of arch, i went back and reinstalled arch...completely new. now i have got problems with 32bit-wine. i am using arch64 and never had such a problem. we are discussing that in the german forums without any solutions yet so i hope you could help me. i guess nobody else has this problem (because i did not read of it) so i must be an idiot and do sth. wrong .
    ok, first, this issue does not appear when running native 64bit applications, like frozen-bubble iin fullscreen. so i guess it has sth to do with the lib32 packages...dont know. when i am running windows games iin wine (bin32-wine 1.1.17 or bin32-wine-suse 1.1.18 from aur) in fullscreen, wine changes the resolution as it has to be (640x480, 800x600 or whatever), but i can still use my mouse and move it to the right or bottom edge and can so navigate through the whole screen ( so i can see the rest of my gnome desktop for example). because of that my games are unplayable. it happens to morrowind, half-life (the old one, not the source-based) & half-life 2, so it not depends on one game. i tried running wine using xrandr resolution changer (changed in wine config) but the i cannot change the resolution from my native one (1680x1050), also not perfectly, because i want to play my games in 800x600 ^^.
    but remember, it did work quite well two weeks ago :-\ (i will never change my distro again, i will never change my distro again... )
    here is maybe stuff you will need:
    my xorg.conf:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    but i also tried different other xorg.conf's. i had also this minimalistic one:
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    but the i had problems changing my resolution in gnome (via gnome-display-properties).
    my lib32-*:
    [stephan@myhost ~]$ pacman -Qs lib32-
    local/lib32-alsa-lib 1.0.19-1 (lib32)
    An alternative implementation of Linux sound support
    local/lib32-e2fsprogs 1.41.4-1
    Ext2 filesystem utilities
    local/lib32-expat 2.0.1-2 (lib32)
    An XML Parser library written in C
    local/lib32-fontconfig 2.6.0-2 (lib32)
    A library for configuring and customizing font access
    local/lib32-freetype2 2.3.9-1 (lib32)
    TrueType font rendering library
    local/lib32-gcc-libs 4.3.3-1 (lib32)
    The GNU Compiler Collection
    local/lib32-glibc 2.9-4 (lib32)
    GNU C Library (32 Bit)
    local/lib32-libdrm 2.3.1-3 (lib32)
    Userspace interface to kernel DRM services
    local/lib32-libice 1.0.5-1 (lib32)
    X11 Inter-Client Exchange library
    local/lib32-libjpeg 6b-6 (lib32)
    Library of JPEG support functions
    local/lib32-libsm 1.1.0-1.1 (lib32)
    X11 Session Management library
    local/lib32-libx11 1.2-1 (lib32)
    X11 client-side library
    local/lib32-libxau 1.0.4-1 (lib32)
    X11 authorisation library
    local/lib32-libxcb 1.2-1 (lib32)
    X11 client-side library
    local/lib32-libxcomposite 0.4.0-1 (lib32)
    X11 Composite extension library
    local/lib32-libxdamage 1.1.1-1 (lib32)
    X11 damaged region extension library
    local/lib32-libxdmcp 1.0.2-1 (lib32)
    X11 Display Manager Control Protocol library
    local/lib32-libxext 1.0.5-1 (lib32)
    X11 miscellaneous extensions library
    local/lib32-libxfixes 4.0.3-1 (lib32)
    X11 miscellaneous 'fixes' extension library
    local/lib32-libxml2 2.7.3-1 (lib32)
    XML parsing library, version 2
    local/lib32-libxrender 0.9.4-1 (lib32)
    X Rendering Extension client library
    local/lib32-libxslt 1.1.24-2 (lib32)
    XML stylesheet transformation library
    local/lib32-libxt 1.0.5-1 (lib32)
    X11 toolkit intrinsics library
    local/lib32-libxxf86vm 1.0.2-1 (lib32)
    X11 XFree86 video mode extension library
    local/lib32-mesa 7.2-1 (lib32)
    Mesa OpenGL library
    local/lib32-nvidia-utils 180.29-3 (lib32)
    NVIDIA drivers utilities and libraries.
    local/lib32-zlib 1.2.3.3-3 (lib32)
    A compression/decompression Library
    i am using stable archlinux, no testing. as you can see i have got an nvidia-card.
    i also tried removing .wine and also (!) .* and created a new user, but without any solution. everytime the same problem. i will try installing a 32bit chroot now, maybe it is working there.
    i hope you can help me

    G`Day I had the same problem also (x64), I managed to get it working by installing all of lib32* without chroot
    # pacman -S lib32
    resolving dependencies...
    looking for inter-conflicts...
    warning: removing 'lib32-libgl' from target list because it conflicts with 'lib32-nvidia-utils'
    Targets (69): lib32-glibc-2.9-4 lib32-alsa-lib-1.0.19-1 lib32-glib2-2.20.1-1 lib32-atk-1.26.0-1 lib32-expat-2.0.1-2 lib32-zlib-1.2.3.3-3 lib32-freetype2-2.3.9-2
    lib32-fontconfig-2.6.0-2 lib32-libpng-1.2.35-1 lib32-libxau-1.0.4-1 lib32-libxcb-1.2-1 lib32-libxcomposite-0.4.0-2 lib32-libxdmcp-1.0.2-2
    lib32-libx11-1.2.1-1 lib32-libxrender-0.9.4-2 lib32-pixman-0.14.0-2 lib32-xcb-util-0.3.4-2 lib32-cairo-1.8.6-1 lib32-openssl-0.9.8k-2
    lib32-curl-7.19.4-1 lib32-gcc-libs-4.3.3-1 lib32-db-4.7.25-2 lib32-libtasn1-2.1-1 lib32-lzo2-2.02-3.1 lib32-libgpg-error-1.6-1.1
    lib32-libgcrypt-1.4.4-1 lib32-opencdk-0.6.6-1.1 lib32-ncurses-5.7-2 lib32-readline-5.2.013-2 lib32-gnutls-2.6.6-1 lib32-heimdal-1.2.1-3
    lib32-libjpeg-6b-6 lib32-libtiff-3.8.2-4 lib32-libcups-1.3.10-2 lib32-libxfixes-4.0.3-2 lib32-libxcursor-1.1.9-2 lib32-libxext-1.0.5-2
    lib32-libxi-1.2.1-1 lib32-libxinerama-1.0.3-2 lib32-libxrandr-1.3.0-1 lib32-libxft-2.1.13-1 lib32-pango-1.24.1-1 lib32-pcre-7.9-1 lib32-gtk2-2.16.1-1
    lib32-libart-lgpl-2.3.20-1 lib32-libdrm-2.4.9-1 lib32-libxxf86vm-1.0.2-1 lib32-libice-1.0.5-1 lib32-libsm-1.1.0-1.1 lib32-libstdc++5-3.3.6-3
    lib32-libxdamage-1.1.1-2 lib32-libxml2-2.7.3-1 lib32-libxt-1.0.5-2 lib32-libxmu-1.0.4-2 lib32-libxslt-1.1.24-2 lib32-libxss-1.1.3-1
    lib32-libxtst-1.0.3-2 lib32-libxv-1.0.4-1 lib32-nvidia-utils-180.51-1 lib32-mesa-7.4.1-1 lib32-nas-1.9.2-1 lib32-nspr-4.7.4-1 lib32-sqlite3-3.6.13-1
    lib32-nss-3.12.3-1 lib32-openal-1.7.411-1 lib32-pciutils-3.1.2-1 lib32-qt-4.5.0-5 lib32-qt3-3.3.8-10 lib32-sdl-1.2.13-3

  • How to install this update and solve USB and touchpad issues?

    I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
    Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
    The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
    The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
    This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
    Driver revision history:
    Twinhan VP704A Driver Release note
    Note:
    1.In case the system crashes while running with VP704A, Please install ULI
    USB 2.0 host driver in \ULiUSB20Driver
    2. For XP/SP1, please update with the patch in
    <http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
    3.In XP/SP1, updating driver will crash the system, while new install is ok.
    The trick to update driver in XP/SP1 is shown in the following steps,
    a. Uninstall the driver
    b. Unplug and plug the USB device
    c. Install the driver
    4. To support remote controller, please launch Agent.exe in \Agent.
    Further details can be found in \Agent\Readme.txt
    Known issues:
    1. Multi-instance is not supported
    2. Remote wakeup is not supported
    3. High CPU usage in Analog audio/video capture
    4. Bad VBI Signal using YUY2 color format
    5. AV out of sync if audio captured from wrong filter.
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    6. Noise with analog-TV and FM Radio
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    Driver revision history:
    2005/10/24, Version: 1.0.2.8
    Bugs fixed and new features:
    1.Crossbar not properly set.
    2005/10/21, Version: 1.0.2.7
    Bugs fixed and new features:
    1.Firmware version read from FLASH OK!
    2005/10/14, Version: 1.0.2.6
    Bugs fixed and new features:
    1.Mutil-Access driver blank part below part screen when VBI!
    2.Mutil-Access driver HCT driver verify crash fix!
    2005/10/07, Version: 1.0.2.5
    Bugs fixed and new features:
    1.Tuner Power off when S-Video,Composite.
    2005/09/30, Version: 1.0.2.4
    Bugs fixed and new features:
    1.Agent.exe updated for repeat bug!
    2.TI5150 Register for Video Format fix!
    2005/09/29, Version: 1.0.2.3
    Bugs fixed and new features:
    1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
    Note: "USB Audio device" filter provided by system does not support mutil-Access.
    2.Reset TI5150 when a new frequency is set
    2005/09/27, Version: 1.0.2.2
    Bugs fixed and new features:
    1.Fix I2C unstable access on some devices.
    2005/09/23, Version: 1.0.2.1
    Bugs fixed and new features:
    1.Analog TV becomes darker sometimes.
    2005/09/15, Version: 1.0.2.0
    Bugs fixed and new features:
    1.Fix INF for Windows 2000 installation.
    2.FM radio scan policy changed!
    2005/09/13, Version: 1.0.1.9
    Bugs fixed and new features:
    1.USB serial number string not visible with USBView, firmware update required.
    2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
    2005/09/13, Version: 1.0.1.8
    Bugs fixed and new features:
    1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
    2005/09/12, Version: 1.0.1.7
    Bugs fixed and new features:
    1.Improve channel lock status check performance
    2.Pinnacle INF Fix.
    2005/09/09, Version: 1.0.1.6
    Bugs fixed and new features:
    1.Add some audio initialization function.
    2005/08/31, Version: 1.0.1.5
    Bugs fixed and new features:
    1.NTSC & PAL mode resolution separation.
    2005/08/30, Version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2.Frame Drop.
    3.Pinnacle inf file HCT chkinf fail.
    2005/08/22, Version: 1.0.1.3
    Bugs fixed and new features:
    1.Add Remote controller interface in digital source filter.
    2.A new Remote controller test tool with source code in \Test_RC.
    2005/08/16, Version: 1.0.1.2
    Bugs fixed and new features:
    1.Reorg Pinnacel & Twinhan's driver & folder.
    2.VP704A_BDA_Test tool, add system code test.
    3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
    4.Firmware update
    2005/08/15, Version: 1.0.1.1
    Bugs fixed and new features:
    1.Serial number function is lost while adjusting TV audio volume
    2.RC6A CIR support
    (This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
    The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
    EEPROM should be flashed with \Firmware\M9207.bin )
    3.Serieal number, MAC address and OEM device name supported.
    Please refer to further details in \Firmware\readme.txt.
    4.Ioclt sample source code included.
    2005/08/08, Version: 1.0.0.10
    Bugs fixed and new features:
    1.Analog TV audio volume increase.
    2005/08/04, Version: 1.0.0.9
    Bugs fixed and new features:
    1.Analog TV Video mode set failure.
    2005/08/03, Version: 1.0.0.8
    Bugs fixed and new features:
    1.Off-centerf requency scan +/- 125Khz
    2.Fix duplicated program scanned in MCE.
    2005/08/02, Version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
    2005/07/28, Version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
    2.Improve I2C communication stability.
    3.Unify Signal strength & quality indication as THBda ioctl interface.
    4.Capture filter Lock status check.
    2005/07/28, Version: 1.0.0.5
    Bugs fixed and new features:
    1. The same signal strength & quality indications as VP7046.
    2. Debug build driver
    2005/07/21, Version: 1.0.0.4
    Bugs fixed and new features:
    1.Update INF.
    2005/07/20, Version: 1.0.0.3
    Bugs fixed and new features:
    1.Improve performance in PCM4
    2.Switching from Analog TV Mode to FM Mode failure
    2005/07/04, Version: 1.0.0.2
    Bugs fixed and new features:
    1.Production Tool FM test OK!
    And here is the readme from the other file within the update ?
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
    INTRODUCTION
    This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
    and Windows XP.
    CONTENTS OF THIS DOCUMENT
    1. Installation Instructions
    2. Uninstallation Instructions
    1. Installation Instructions
    (Windows 98 SE & Windows ME)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system,then restart your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows 2000)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows XP)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - Click "NEXT"
    - This program will install and load the driver and you don't have to reboot the
    computer.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller", continue to install.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    Notice:
    If you can't setup driver successfully. Please reboot your system and then follow
    above steps to install driver again.
    2. Uninstallation Instructions
    1. Open "Control Panel" folder.
    2. Invoke "Add\Remove Programs" icon.
    3. Choose "ULi USB2.0 Driver" item.
    4. Click on "Add/Remove" button to remove drivers.
    Change List:
    1.74
    1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
    2.support all USB2.0 Host Controller.
    1.73
    1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
    2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
    3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
    4.fix issue that wirless lan will disconect when plug-in usb device.
    1.72
    1.Fix issue that system will crash when USB HD copy large file.
    1.71
    1.improve Power management function in Win98/ME.
    1.70
    1.Improve the function of devcie detection.
    1.62
    1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
    1.61
    1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
    1.60
    1.To support power management functions when a HUB with USB device plug into
    a root HUB.
    1.57
    1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
    2.Fix issue that audio can't display smooth when USB device attach to system.
    3.Fix system can't detect USB dvice when USB device attach to system in
    suspend mode.
    4.Fix issue that when USB root HUB have full loading, USB HD sometimes
    transaction fail.
    1.56
    1. Fix issue that DVD decoder device can't display properly.
    1.55
    1. Fix OTI USB 2.0 hand drive can't be detect issue.
    2. Fix USB mouse can't use after resume from suspend.
    1.54
    1.Improve driver security.
    1.53
    1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
    2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
    1.52
    1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
    automatically fix file system errors
    2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
    v.1.51
    1. Improve USB 2.0 cardreader compatibility.
    2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
    v1.50
    1. Improve bulk transfer
    v1.48
    1. Fix USB 2.0 LAN driver installation hanging up
    2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
    3. Fix some laptops Win98SE booting hanging up
    v1.47
    1. Improve bulk transfer performance.
    2. Fix USB 2.0 bulk webcam preview failure.
    v1.46
    1. Support USB 2.0 and 1.1 Isochronous devices
    2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
    3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
    4. Improve device detection capability in Win9X/ME
    v1.45
    1. Fix system hanging up when resuming from ACPI sleep mode.
    2. Fix mouse sometimes doesn't disappear when it's unplugged.
    3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
    v1.44
    1. Support composite device
    2. Improve device detection
    v1.43
    1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
    2. Fix high-speed device detected as full-speed device
    3. Fix some USB mouses detection failure problem
    4. Fix some USB 2.0 hubs detection failure problem
    5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
    v1.42
    1. Fix PC Card ejection hanging up in Win98/ME
    2. Fix suspend/resume hanging up in Win98
    3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
    4. Fix some PC Card USB 1.1 device detection failure
    v1.41
    1. Add new feature that system can install driver before device is plugged.
    2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
    v1.40
    1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
    2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
    v1.32
    1. Fix issue that driver can't detect Microsoft driver in Windows XP
    if OS path is not c:\windows.
    2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
    v1.31
    1. Fix issue that driver can't install on Windows 2000.
    v1.30
    1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
    2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
    3. Fix issue that sometimes when you click "Scan for hardware changes".
    to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
    file can't be found.
    4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
    verison of ULi EHCI controller devices are plugged and unplugged.
    5. Support installing driver for more than one ULi EHCI controller devices existing on
    system at the same time.
    6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
    v1.20
    1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
    ULi Coporation. (ULi) web sites:
    http://www.uli.com.tw/ (Taiwan)
    CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
    i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • [SOLVED] Keyboard and Mouse Issue

    Hi Arch Guros!
    Please be easy on me, this is my first post and I'll try to make it as specific as I can..
    When I use the Arch Linux Boot CD to attempt to install Arch Linux I noticed that my keyboard was not working..
    I walked away from my computer for 5 minutes and when I came back I noticed that the keyboard it was lit up and working..  I noticed after a few reboots that the keyboard does in fact takes a few minutes to start to work and I noticed that this started to happen on my second hard drive running Linux Mint (when I fell back to it)..  However, with a Windows 7 installation, this does not happen.
    Anyway, I ran:
    # lsusb
    Relevant Output:
    Bus 009 Device 006: ID 06a3:0728 Saitek PLC
    Then I ran:
    # dmesg | cat > /root/dmesg.txt
    # grep usb /root/dmesg.txt | cat > /root/dmesg_usb.txt
    dmesg Output:
    http://pastebin.com/0ci5kvy7
    USB relevant dmesg Output:
    http://pastebin.com/JAWmH1dP
    I've noticed A LOT of usb descriptor errors and usb address issues..
    I have tried flashing a new BIOS to my motherboard (gigabyte 990fxa-ud5) and resetting the settings on it to factory defaults.. This dmesg output is when JUST my keyboard is connected..
    I will attach the two files with the errors..
    If you need anymore information please ask, I can provide anything you need..
    Thanks in advance guys! I hope I have met the forum etiquette.. (I was intimidated by the date output question >.>)
    Edit: I would also like to note that the keyboard starts working at 166 in the dmesg output..  Not sure if that helps at all
    Last edited by DizzyThermal (2012-12-12 20:26:04)

    Alright, so I did an extensive amount of research after posting this while I waited for a response and seemed to find a procedure that worked to fix this issue..
    I used a jumper to clear my CMOS settings..
    I then loaded up the Arch Linux install and was greeted with a:
    Unexpected Inconsistency: Run fsck Manually
    I proceeded by running fsck /dev/sda2..
    I said yes to all the prompts and rebooted,,
    Everything seems to work find now.. Odd, but it didn't seem like a solid fix.. Oh well, thanks for listening!

  • Drag and Drop - detecting drop away from a component

    Flex 4, AIR 2.0 app
    I have a drag and drop detecting a Button drag away from a Group1 into Group2.
    When the user drops into a Group2, the Button is added to it, which obviously removes it from Group1.
    I would like it that if the user drags away from Group2 and drops it randomly on the screen, the Button will be added back into Group1.
    Does anyone have any ideas as to how I might go about detecting the end of a drag when not over a component, so I can add the button back into Group1 again?
    Hope that makes sense!!!

    Thanks Ronnie,
    I'll have a look at gthis as it looks a bit more efficient than the solution I have come up with.
    The only thing I'm not sure about is at what point my Button gets put back into Group1.  In my current movie, I have a function which handles the dragDrop event.  But if I drop outside a component, I don't have an event from which I call the handleDrop(dragEvent) function.
    I'll have a look.
    In the meantime, what I'm doing is Making my drag item a custom component, passing a reference to it's default container (Group1) and its Default X and Y co-ordinates.
    Then, I have a dragComplete handler which is called whenever the drag item is released - I then check the action property of the event and if it is "none" I know it has been dropped outside a recognised target and I can add it back into its default group and set its default x and y coordinates.  This seems to work quite nicely at the moment.
    so, my code in the Drag Button looks like this:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Button xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        mouseDown="mouseDownHandler(event)"
        dragComplete="dragCompleteHandler(event)">
    <fx:Script>
      <![CDATA[  
       import mx.core.DragSource;
       import mx.core.IUIComponent;
       import mx.events.DragEvent;
       import mx.managers.DragManager;
       public var _defaultParent:Object;
       public var _defaultX:Number;
       public var _defaultY:Number;
       protected function mouseDownHandler(event:MouseEvent):void
        // the drag initiator is the object being dragged (target of the mouse event)
        var dragInitiator:IUIComponent = event.currentTarget as IUIComponent;
        // the drag source contains data about what's being dragged
        var dragSource:DragSource = new DragSource();
        // ask the DragManger to begin the drag
        DragManager.doDrag( dragInitiator, dragSource, event, null );
       protected function dragCompleteHandler(event:DragEvent):void
        // TODO Auto-generated method stub
        //trace("Drag complete!");
        //trace("target = " + event.target);
        //trace("action = " + event.action);
        if (event.action != "none"){
         trace("woo!");
        }else{
         trace("put the drag label back into its original position");
         if (event.target.parent != _defaultParent){
          trace("put it back, you monster!");
          _defaultParent.addElement(event.target);
          event.target.x = _defaultX;
          event.target.y = _defaultY;
         }else{
          trace("ah... it's already in the right place... actually!");
      ]]>
    </fx:Script>
    </s:Button>

  • Need to have the keyboard and mouse 100 feet away from Mac

    I need to have the Keyboard and Mouse/Track-pad 100 feet away from Mac Mini.
    What are my options ?
    Thanks

    In your case with the need to control it from multiple locations the best and realistically only solution is to use Screen Sharing to remotely control the Mac.
    With this solution you can control it from anywhere you have a network connection and could use a laptop to control the Mac mini. This is the solution I use in a very similar situation.
    Bluetooth does not have enough range, even RF wireless keyboard and mice devices also would not have the range, and I don't believe there is a suitable USB solution.
    The only other possibility that occurs to me is to use an IP based KVM. A KVM (Keyboard/Video/Mouse) switch box allows multiple computers to be controlled from typically a single keyboard and mouse. However there are versions which allows you to do this over a TCP/IP network i.e. Ethernet. Then again you would be able to do this anywhere on your network. Here is one example - http://www.aten-usa.com/products/productItem.php?model_no=CN8600
    Personally I still strongly recommend using Screen Sharing. Its built-in and completely free!

  • [SOLVED]libgl and nvidia-173xx-utils conflicts

    sudo pacman -Syu
    :: Синхронизируются базы данных пакетов...
    core up to date
    extra up to date
    community up to date
    archlinuxfr up to date
    :: System full update...
    Dependencies...
    проверка на взаимную несовместимость...
    :: libgl и nvidia-173xx-utils conflicts. Delete nvidia-173xx-utils? [y/N] n
    error: обнаружен неразрешимый конфликт пакетов
    error: не удалось подготовить запрос (конфликтующие зависимости)
    :: libgl and nvidia-173xx-utils conflicts
    (Sorry, original log is on russian, but I translated main words)
    But!
    pacman -Rns libgl
    error: 'libgl': not found
    How to fix it?
    Last edited by Dr.X (2010-11-10 18:41:30)

    Solved the problem is very simple - removing the nouveau. I have it was because I was in one blog/forum read that no problem with containing both nvidia and nouveau, but that one of them will be in Blacklist. But he interrupted me to upgrade. But the strangest thing - when I last updated, they do not conflict, but now whoop.
    Thanks TigTex and wonder for your help!

  • [SOLVED] Libgl and Nvidia-Utils are in conflict with the mos

    :: Synchronizing package databases...
    core is up to date
    extra                   887.1K 1424.1K/s 00:00:01 [-------------------------] 100%
    community               580.2K 1192.7K/s 00:00:00 [-------------------------] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    :: libgl and nvidia-utils are in conflict. Remove nvidia-utils? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: libgl and nvidia-utils are in conflict
    I've read threads on this before but this time nvidia-utils is being asked to be removed. I'm not sure if removing nvidia-utils is safe. Before, reading some threads on here, I had to set libgl to ignore to get nvidia-utils to install.
    Thanks.
    Last edited by 6msj (2011-11-02 22:48:25)

    Sorry to bump a dying post but I'm running into this problem upgrading dkms-nvidia.
    ==> Install or build missing dependencies for dkms-nvidia:
    resolving dependencies...
    looking for inter-conflicts...
    :: nvidia-utils and libgl are in conflict. Remove libgl? [y/N] y
    :: nvidia-utils and nvidia-utils-bumblebee are in conflict. Remove nvidia-utils-bumblebee? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: nvidia-utils and nvidia-utils-bumblebee are in conflict
    sudo pacman -Rns nvidia-utils
    error: target not found: nvidia-utils
    pacman -Qs dri
    local/bumblebee 3.0.1-4
        Bumblebee brings Optimus Support for Linux Through VirtualGL. You need to install proper drivers separately. Can be used with Nouveau or Nvidia
    local/dkms-nvidia 304.64-1
        NVIDIA dynamic kernel module (DKMS) drivers for kernel26.
    local/dri2proto 2.8-1
        X11 DRI protocol
    local/hdparm 9.43-1
        A shell utility for manipulating Linux IDE drive/driver parameters
    local/intel-dri 9.0.1-1
        Mesa DRI drivers for Intel
    local/lib32-nvidia-utils 310.19-1
        NVIDIA drivers utilities and libraries. (32-bit)
    local/libgl 9.0.1-1
        Mesa 3-D graphics library and DRI software rasterizer
    local/libraw1394 2.0.7-2
        Provides an API to the Linux IEEE1394 (FireWire) driver
    local/libzapojit 0.0.2-1
        GLib/GObject wrapper for the SkyDrive and Hotmail REST APIs
    local/nvidia-utils-bumblebee 304.64-1
        NVIDIA drivers utilities and libraries. With LibGL and xorg modules installed in a different directory.
    local/unetbootin 581-1
        Create bootable Live USB drives
    local/xf86-input-evdev 2.7.3-2 (xorg-drivers xorg)
        X.org evdev input driver
    local/xf86-input-keyboard 1.6.2-2 (xorg-drivers xorg)
        X.Org keyboard input driver
    local/xf86-input-synaptics 1.6.2-2 (xorg-drivers xorg)
        Synaptics driver for notebook touchpads
    local/xf86-video-intel 2.20.14-1 (xorg-drivers xorg)
        X.org Intel i810/i830/i915/945G/G965+ video drivers
    local/xorg-xdriinfo 1.0.4-3 (xorg-apps xorg)
        Query configuration information of DRI drivers
    >wonder wrote:you have intel-dri  installed which has libgl dependency versioned. that package was updated recently and wants a newer libgl but it can't install it because nvidia-utils is installed.solution: pacman -R intel-dri
    My laptop has optimus so intel and nvidia drivers are required, any idea how to proceed?
    Last edited by possiblefool (2012-12-05 12:56:44)

  • [solved]libgl and nvidia-utils are in conflict

    resolving dependencies...
    warning: dependency cycle detected:
    warning: udev will be installed before its util-linux dependency
    looking for inter-conflicts...
    :: libgl and nvidia-utils are in conflict. Remove nvidia-utils? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: libgl and nvidia-utils are in conflict
    I remember that I had to remove libgl when installing the Nvidia driver, has something regarding that situation changed/inverted  ?
    (Also, I have multilib enabled and 32 bit nvidia packages installed)
    Last edited by manasij7479 (2012-03-17 21:40:10)

    Grepping "pacman -Q" for nvidia, ati and intel individually do not show anything suspicious under the later two.
    [manasij7479@manasijd ~]$ pacman -Q | grep nvidia
    lib32-nvidia-utils 295.20-1
    nvidia 295.20-3
    nvidia-cg-toolkit 3.1-1
    nvidia-utils 295.20-1
    opencl-nvidia 295.20-1
    [manasij7479@manasijd ~]$ pacman -Q | grep intel
    intel-tbb 4.0_20111130-1
    [manasij7479@manasijd ~]$ pacman -Q | grep ati
    kdegames-granatier 4.8.1-1
    kdegames-kpatience 4.8.1-1
    kdeplasma-addons-applets-weatherstation 4.8.1-1
    kdetoys-kteatime 4.8.1-1
    startup-notification 0.12-2
    telepathy-kde-integration-module 0.2.0-1
    What other names can video drivers have ?
    Does the lib32-nvidia-utils count as a dupe ? If so, how do I run 32 bit software with 3d acceleration ?

  • [SOLVED]youtube and flash issue

    So, I've got a flash issue that only happens on youtube. It looks like this:
    It happens every time I open a browser (on both firefox and chrome) and goes away after refreshing the page, but its kinda annoying to refresh the page every time I wanna watch a video. Also when switching to fullscreen the video stays in software video rendering when it should switch to accelerated rendering so I get around 10 fps making the video unwatchable (this doesnt happen with windows on the same hardware).
    Other flash websites like vimeo work fine and I can watch vimeo HD videos in fullscreen without any issue.
    This started happening when youtube introduced the new black look of their player (it was all fine and dandy before), and its bothering me ever since so I'm now using flashvideoreplacer extension for firefox but I still want flash to work properly so I can use chrome again.
    I'm using 64-bit arch, flashplugin from extra (getting the same effect with any other flashplugin from AUR) and EnableLinuxHWVideoDecode is set to 1 in /etc/adobe/mms.conf
    Oh and I've tried this on Ubuntu live cd and controls work fine but accelerated video still doesnt work.
    Any help would be appreciated.
    SOLVED:Graphic problem is resolved after installing new version of flashplugin, but still no HW acceleration.
    Last edited by pixy (2012-04-03 21:39:11)

    strangest thing...  a few 'non-youtube' sites still work ok, but still complain 'no javascript' ..
    so went to firefox (v17.0.4 ESR) 'tools, options, content' and yup,  javascript UNTICKED!!   :O :O  my bad memory? something else???  {shrugs}
    ticked it, now ok........  think im getting old??????  ROFL..

  • [SOLVED] Xfce and bus issues

    Long story short, I updated Xfce to 4.8 few days ago, and everything went well. I was running my basic programs and VM during these days.
    But today, all of a sudden, some programs didn't launch anymore. xfce4-mixer quit with a "Bus Error" message, and many other things started failing. After a reboot, it just got weirder: NMApplet appeared in the tray and displayed my network (wireless), but clicking it just "freezes" the icon. Aside from that, xfce wouldn't load my keymap (es), instead it defaults to a "us" keymap.
    The only packages I updated today were a few python and power management packages. Downgrading these (and dbus) didn't help.
    Also, X terminals (xfce's terminal, tilda, etc) behave strangely when scrolling back: A few lines are displayed, but scrolling up further just displays empty space.
    No major configs were edited during this time. Googling a bit gave me results about dbus being twice on rc.conf, but that's not the issue. My current rc.conf has dbus and hal after it (Method 1 in archwiki). Excluding dbus (Method 2) doesn't change things. I also tried excluding hal (Xfce 4.8 doesn't require it anymore, correct?), but it's the same thing.
    Xfce itself seems to run sorta fine though: The shutdown command inside the DE works, and some apps do run (power management, xfce notes, notifications). Others give out several errors: Chromium for example says it "can't create a directory socket" or something (using another system right now, so I can't check), while avant-window-navigator gives out dbus and gconf errors.
    dmesg doesn't display anything out of the ordinary at the end (the blank space in terminals issue doesn't let me read too far back.)
    EDIT: A dbus-daemon process is constantly using 50% of the CPU. And the kernel is 2.6.36 (upgraded it quite some time ago, had no issues)
    Any ideas on how to proceed would be greatly appreciated.
    Last edited by GRem (2011-01-23 01:00:54)

    ...and I solved it.
    Since nothing would work, I decided to back up my system files and pacman cache, among other things. When checking my pkgcache folder size, I noticed that the / partition was at 100%...
    So running ncdu I find out slim had a 9.9 GB log for some reason. Deleted that, rebooted, and everything is back to normal.
    So now I mark this as solved, thankfully. Now the slim logs are not growing like crazy.

Maybe you are looking for

  • How to get the values inputted by the user in Classification view of  MM02

    Hello, Does anyone know how to get the inputted values in Classification view of MM02/MM01? I tried to use CLAF_CLASSIFICATION_OF_OBJECTS but this gets the values that is currently saved in the tables and not the values that the user recently inputte

  • Slow start up

    my computer has been slow to boot so I decided to reach to some of the pros out there and try finding out  what is going on. I noticed a lot of redundancies and repeating of what seems to be errors in the report from CONSOLE - see below. Can anyone h

  • Photo Uploading on facebook

    I can't upload photos through inbuilt browser of blackberry. Whenever i go for this it will display Error-Your browser does not support photo uploaing. Can any one help in thismatter. Solved! Go to Solution.

  • Product warning messages not shown in WCEM

    Hi, I am facing a problem regarding product warning messages in WCEM 3.0. If a product is having status I1050 (Blocked - Error), message CRM_PRODUCT_I message 420 is shown in WCEM and it is not orderable. (Correct behaviour) If a product is having st

  • Retina Display-Better Screen or More Pixels?

    I make a lot of advertisments, e-mail blasts, web banners, etc. that are viewed on my platforms. Does the higher-quality Retina display actual add more pixels to the screen so a graphic on an iPad 2 with a 1024×768 screen will look different, size wi