[SOLVED] X not quite right (resolution, driver, color depth)
I am followed the instructions in the Beginner's Guide, and I am quite happy with my system. However although I am certain I installed the open Radeon driver, any time I enable it, X just gives me a blank screen. If I can ctrl-alt-backspace out of it, the screen is really dim and I can barely read it. So I am stuck with the Vesa driver. As I understand it, Vesa doesn't support my monitor's native resolution of 1680x1050. The highest I have been able to get is 1280x1024. Also I would like to use 32-bit color if I could, but that is not as important.
Below is my xorg.conf as it currently stands. I used hwd to generate it. Actually hwd generated two xorg.conf files (xorg.conf.radeon and xorg.conf.vesa). The radeon file never worked, but the vesa version did work right away, so that's the one I started to tweak.
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
#Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
Option "DPI" "96x96"
# DisplaySize 444 277 # 96 DPI @ 1680x1050 calc: (x|y)pixels * 25.4 / dpi
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
EndSection
Section "Device"
Identifier "Card0"
Driver "vesa"
#Driver "radeon"
VendorName "ATi"
BoardName "Radeon 7500" # RV200 QW
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by ravinggenius (2008-07-09 22:53:00)
Thanks for helping me with this. By the way does Compiz Fusion support the Vesa driver?
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ravinggenius 2.6.25-ARCH #1 SMP PREEMPT Thu Jul 3 20:29:23 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 9 13:14:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0314 card 1106,0314 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 00:09:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 00:09:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: 00:0f:0: chip 1106,3149 card 1565,3206 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1565,3206 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1565,8212 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1565,2200 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5157 card 1002,013a rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV200 QW [Radeon 7500] rev 0, Mem @ 0xf0000000/27, 0xf8020000/16, I/O @ 0xa000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 7500 QW (AGP/PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[22] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[23] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[24] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[26] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[27] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000f8020000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP/PCI)" (ChipID = 0x5157)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 23000, sclk: 230.000000, mclk: 290.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=23000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-2
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 2
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- 0x64
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1680x1050
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (470, 300) mm
(**) RADEON(0): DPI set to (90, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8020000 - 0xf802ffff (0x10000) MX[b]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[7] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[8] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[10] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[15] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[25] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[26] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[27] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[28] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[29] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[32] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit f0000000 0 0
(==) RADEON(0): Write-combining range (0xf0000000,0x4000000)
(WW) RADEON(0): Cannot read colourmap from VGA. Will restore with default
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1728,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1728,1202)
(II) RADEON(0): Largest offscreen area available: 1728 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1023000
(II) RADEON(0): Will use depth buffer at offset 0x180c000
(II) RADEON(0): Will use 32768 kb for textures at offset 0x1ff5000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x07000207 [AGP 0x1106/0x0314; Card 0x1002/0x5157]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe8000000
(II) RADEON(0): [agp] Ring mapped at 0xb3926000
(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb3925000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb3725000
(II) RADEON(0): [agp] GART texture map handle = 0xe8302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3245000
(II) RADEON(0): [drm] register handle = 0xf8020000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 146250000
best_freq: 146250000
best_feedback_div: 130
best_ref_div: 12
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xf3fff000 is: 0xf3fff000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe87fe800
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xe87fe800
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1728 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "DPI" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 433 x 271
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
disable montype: 1
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xd12bd000 at 0xb7c32000
(II) RADEON(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
Similar Messages
-
T420 on docking + extl Monitor shows on vc not the right resolution
Hello
i have an T420 ThinkPad which is connectet at home with a docking station per displayport. The display from the laptop is closed all the time all works well only when i not start X server the resolution is not set right here is what i mean. When starting X the resolution is ok.
und hier ncmpcpp
this is my .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#virtual desktop:
#xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1
#when not docked:
#xrandr --output LVDS1 --auto --output DP2 --off
#docked with NEC:
xrandr --output DP2 --auto --output LVDS1 --off
#when not docked:
#xrandr --output LVDS1 --auto --DP2 --off
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
sh ~/.fehbg &
conky &
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec openbox-session
The reason is i will when i not start X start ncmpcpp on vc1 but as you can see on the pictures they take the resolution from my laptop
How can i fix this is it possible?
ps;on my .xinitrc i have this 2 times what of them is the right? or are both the same?
#when not docked:
#xrandr --output LVDS1 --auto --output DP2 --off
#when not docked:
#xrandr --output LVDS1 --auto --DP2 --offThanks for the replies. I don't have an xorg.conf file. I tried one (generated by Xorg -configure) in my attempts to fix the problem, but I deleted it when I didn't work.
I'm not at home right now, so I can't get the exact output from xrandr, but I know it showed that the resolution was 1024x768.
When I first installed the system I thought that I needed the xf86-video-s3 driver, but that didn't work (X just ignored it and used vesa) so after a bit of research I found that the driver I needed was xf86-video-savage, which, as you can see from the log file, it is using.
karol, I'll try your suggestion of the UseBIOS option when I get home. The problem in your link looks exactly like mine! -
I should have a 720gb hard drive but it only is 650gb. is there a reason why.. e.g wrong hard drive, does it use some gb for system?
Is the hard drive itself says it has 650gb?
Please note, Windows and hdd manufacture caucluates the stronge differently.
Windows uses different way to caulate the capacity compared to manufactures.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert. -
MacBook Pro 15" with extra display not showing right resolution
I have a MacBook pro 15" that I got just the other day and I hooked it up to a Dell monitor thats native resolution is 1440 x 900 but it doesn't show up in resolutions in preferences. Kinda annoying.
Hi BSteely,
I was wishing to receive a reply from you, since I saw you solved many problems on the forums, thank you
I got it working just sometime back. It was very strange, I messed around with the Color profiles, selected ProPhoto RGB and it suddenly added a new resolution entry under Displays. Although both are identical, if I select the second 1920 x 1080 of the two (see : http://dl.dropbox.com/u/828053/Picture%201.png), it still gets me back to the scaled screen. If I select the first one, it works fine. I still don't understand what could have triggered this.
Also, any JPEG picture seemed to be really messed up on the screen shortly after I fixed it. Red & oranges were way out. I calibrated the display and things started to look better. But there was one strange thing I discovered, in the dashboard, the color of the widgets remained unchanged (and "dirty") even after calibration. Only if I added the same widget afresh, it would change !
Here's a comparison of the calculator : http://dl.dropbox.com/u/828053/Picture%202.png.
Thanks a lot. -
Apple TV not quite right, restarts needed often - are they all this way?
I have a 40GB Apple TV that I keep in 'Sync' mode with my Mac Pro iTunes library. Most of the time, about 65%, the Apple TV works just fine. But the other times here are the odd and random issues I get:
• When buying TV Shows or movies I get an "Accessing iTunes Store" that just sits there spinning forever. A restart often solves the issue, and sometimes after the restart the "Ready to Play" dialog box pops up first thing.
• After waking the Apple TV after a day of inactivity, I will go to play an encoded movie (that is coming from the Mac Pro) and Apple TV will say "File type not supported" or something like that. Waiting 5 minutes, or restarting, fixes the issue and the very same movie file plays fine.
• Though mine is set to 'sync' within iTunes, this still allows me to play movies and music via 'streaming'. But this is very inconsistent. Sometimes streaming will be very fast and movie playback (even HD) will start immediately. Other times it will take FOREVER to begin movie playback - the progress bar loads but literally moves about 10% per minute.
• Why are some TV shows there right away, and others not at all? For instance, Modern Marvels : "new" shows playing on TV are picked up my DVR, but they don't ever seem to show up on iTunes?
Any thoughts on the above issues are GREATLY appreciated... I've had this awhile and it's really been a lot of headache so far.Yes, I changed the channel to 6 (as was recommended in another post) and restarted everything. Worked fine (as usual) for a couple days. Went to get a couple new shows and it did the same "Accessing iTunes" message again - I let it spin for a good 2 mins and then retried. Spun for another minute or so with no change. So cancelled out, restarted Apple TV, went back to same show and bought it right away with no issues.
FRUSTRATING. Literally, I must restart 2 times per week, sometimes more. Sometimes less.
Our primary goal was to let Apple TV replace our DirecTV service. We really hate commercials! LOL - but with not much luck on the Apple TV, I think we'll need to wait until Apple spends more time on this thing.
Mine's on eBay, so for now the problem is solved. Thanks for the replies... -
After Archive and Install, my Home folder is not quite right....
I did an A&I last week and am slowly getting it back to the way it was (minus the problems) but am wondering if my Home Folder has all it should- it seems like it should have more in it so I am just double checking. In my Home Folder I have these items: Desktop, Documents, Library, Movies, Music, Pictures, Public and Sites. No Users folder.....And my Pictures folder just has a folder, it doesn't list my libraries nor does it have my Reunion Pictures folder in it (my genealogy software- it was stored there before and after the A&I) but it's not there now. I see that if I do a Finder search, typing in Reunion Pictures it directs me to my HD--->Users--->Home Folder--->Pictures and it comes up and I see them BUT I don't see it listed in the Pictures folder nor my other 5 libraries. So something is wrong and I need to get this set up right. Can anyone please help me straighten out this mess? I really, really appreciate the help and guidance, Judy
A short addendum: If I right-click on the Pictures folder, to highlight Show Contents, it's all listed there but I don't think I should have to do that. Plus, my Users folder isn't in my Home Folder (in the Finder, my "little house" is there and if I highlight I get just that short list of things but no Users Folder- should it be there? Or is it supposed to reside on the HD? Sorry, I am rambling. j
-
I upgraded to iPhoto 9.3 and now it seems to be mostly working. I'm missing the options for the crop tool. Also when I click on the share button I see the badges for the different services but I don't see the text that describes them. Also when I click on the info button there is no info rendered by the application. See attached images. I've tried downloading and re-applying the "iPhoto9.3Update.dmg" as well as "MacOSXUpdCombo10.7.4.dmg". Anyone have any other ideas?
I've also tried setting up a fresh new iPhoto Library as well as launch iPhoto from a different account on the same computer, iPhoto behaves the same way.
I've also tried repairing disk permisions with Disk Utility.
MacBook Pro
15-inch, Mid 2009
Software Mac OS X Lion 10.7.4 (11E53)Ok.
Other symptom is the dialog boxes when I right click on an image. It doesn't draw any text. Cut, Copy, Past etal. options not there.
I've tried re-installing iLife '11 from DVD. That brought on it's own challanges because you then have to apply the iPhoto 9.1 upgrade before you can apply the 9.3 upgrade.
Also tried repair/re-building images database by launching iPhoto while holding down command+option keys.
I've booted into recovery mode command-r and repaired permissions with Disk Utility.
I've booted into Single User user mode and run "/sbin/fsck -fy"
Now my laptop has never booted faster... But iPhoto issue still persists.
I've installed Aperture 3.3 and the iphoto library seems to be just fine since Aperture 3.3 has not problems using it.
Conclusion: I may just stick with Aperture 3.3 until the next version of iPhoto comes out? I really don't feel like paying the Appstore to buy iPhoto again...Or re-installing OS.
Anyone else have ideas?
-L -
[Solved] Xfce not Maintaining assigned resolution
Hello people,
From Thursday and been having a annoying bug with Xfce which is that it does not keep the settings screen resolution placed after a Shutdown / Restart. I mean I set the resolution of my monitor to 1920x1080 and after turning off the computer or restart it, on the next boot resolution 1920x1080 is not maintained but is changed to 1024x768, so that on every boot I set the resolution.
I have a Monitor AOC 22 "with native resolution of 1920x1080 and Nvidia graphics card with proprietary drivers
What could be causing this error? Any idea how to fix it?
regards
Last edited by jesusangelm (2013-04-22 18:06:02)Look through your /var/log/Xorg.0.log. Read the parts about EDID, available screen resolutions, and the resolution selected. Look for something about "Fuzzy" determination of aspect ratio and tell us if you find something as such.
-
Cover Flow of compilation albums not quite right on iPod Classic
Okay, so after receiving my new iPod classic 80gb the other day, I decided to go through and fix up a lot of my albums in iTunes to display properly in Cover Flow. I have lots of Various Artists albums and have marked all tracks in each album as part of a compilation so that they show up correctly in iTunes 7.4.1.2. Now, when I'm scrolling through Cover Flow within iTunes, these albums appear correctly as 1 entry of "Album Name", and then "Various Artists" underneath that.
However, when I move these tracks over to my iPod and then go to Cover Flow, it looks like instead of using "Various Artists" as the listed artist, it uses the artist of the first track on the album. So, for example, if track 1 were "Board Bangers - Cause the Beat's Hot", it would show "Board Bangers" instead of "Various Artists" as the album artist. However, if I click the middle button to "flip" the cover over to see the tracks, it correctly lists all the tracks for the album (even though it only lists the song titles and not the track artist).
Also, in iTunes, Cover Flow is sorted by album name, whereas on my iPod, Cover Flow is sorted by artist. I'm not sure if that's something I can change in the settings somewhere -- obviously, until this compilation CD "bug" is fixed, I'd rather sort by album name since I haven't memorized the artist of the first track for each disc, hehe.
Has anyone else experienced this or know of a fix for either of these issues?
Thanks,
RobYou r not alone Rob! I just posted the same complain in a previous thread...
http://discussions.apple.com/thread.jspa?threadID=1121028&tstart=0
yeah..i just hope this whole Coverflow problem,along with the ridiculously slow menu response is fixed b4 my 14 days return period is up, if not...this iPOD is going back and am going back to my iPod Photo! -
Photos from Walmart not quite right!
I am new to Mac and I’ve been having a blast so far.
I saved all my photo’s from my PC onto a portable hard drive and imported them into iphoto. I have since burned some photos to CD and tried to print them at Walmart. For some reason the photos all appear blurry, I can print the same photos on my local printer (HP deskjet 5150) and they look fine. Am I doing something wrong?If you used Share > Burn from within iPhoto to create your CD, then you created a mini-iPhoto library that contains all the Originals, Modified photos, and thumbnails. Photo developers usually don't know what to do with these, and it does indeed sound like WalMart printed your thumbnails.
To create a CD for photo developing or non-Mac computers, first select the photos you want in the iPhoto window. Then File > Export to a folder on your desktop, and burn them from the Finder. By exporting, you will ensure that you get the full-sized, edited (if there is one) version of each photo, and nothing else. After you burn your CD you can trash the desktop copies in Finder.
BTW, the export method is also used for uploading to websites. It's better than fishing through the iPhoto library folder, which can lead to a damaged database. -
Color depth adjustment -- running OS 9
Dear All,
OK. This is all about running a special image processing software under OS 9. It requires 256 colors (yes written in 90's). I used to be able to do this with the control panel -- Monitors, which allows me to select among a number of resolutions and color depths. This includes my last laptop -- an iBook G3.
Now that I moved to TiBook G4, I thought I am able to do this too. But, it won't allow me! The only color depth is millions and resolution is 1280x854. Strangely, when I boot it into OS 10.4.11, I CAN switch among the several color depths and resolutions, including 256 colors!
Why is it that I can change the color depth when boot into 10.4.11, but not able to change it when boot into OS 9.2.2? Is there something missing in my OS 9 system folder?
I hate to return back to run in classic now that I am able to boot in OS 9...Hi again, ycchen. See my last post in your other recent thread here, in which I suggested that there might be limitations on the capabilities of your copied OS 9.2.2. I suspect that this is one of them, and that it's because you don't have the right OS 9 driver for your Powerbook's video "card" (which isn't actually a separate card, but video circuitry soldered to the logic board). OS X includes drivers for all Apple's video processors, but a standard OS 9 installation on any given Mac includes only the driver for that machine's video processor. The OS 9 installer disc identifies the processor and installs only the right driver for it. Your installation of OS 9 for the iBook contained only the driver for the iBook's video processor, and not the one for the Tibook's.
My own 1GHz Tibook contains a bootable OS 9.2.2 installed from the Tibook's original Install/Restore DVD, and my OS 9 Monitors control panel looks like this:
http://i493.photobucket.com/albums/rr300/ewweber/Picture1.jpg -
Change color depth of shared screen?
I'm using ARD 3.2 on Mac Pros running 10.4.11.
First of all, I'm not asking about changing the color depth when viewing a screen with ARD. I would like to adjust the color depth when using the "*Share Screen...*" feature to put my screen on 10 other machines for demo purposes.
When viewing a screen there is a little slider to change among B&W, Grayscale, Thousands, and Millions. There is no slider or any preference that I can find for sharing, but I was wondering if there might be a plist or pref file that can be modified either client-side or on the ARD admin computer.
I need to have millions of colors, but all it will do is thousands. Anyone know if this is possible? Thanks.Hi *,
here's a little guide how to patch the Screen Sharing application so it'll allow adjustment of the color depth in full screen mode:
http://www.macworld.com/article/135649/2008/09/screensharingbuttons.html
Hope this helps,
Joern -
T430s - [Solved?] Wireless hardware is not bound to transport driver (Centrino 6205, Win7x64)
Hello,
after clean install of my new T430s using System Update everything worked quite well, except for terrible DPC latency when loading web pages (crapping sound). Therefore I changed LAN driver to 11.10.84.0 from Lenovo (83rw15ww) and latencies went down (this driver has been recommended in some online forum).
Few days later I was on WiFi and latency spiked up again, but this time all the time above 8000µs - even when idle. I started to play with devices in Device Manager and ultimately reinstalled WiFi driver to Lenovo's 15.6.1, then Intel's 15.8.0. The most recommended driver from HP I was unable to install, so no harm there
Not sure when, but somewhere since this point I don't see wireless networks any more. Driver is fine (no yellow ? or !), wireless card is fine (replaced by spare one from my "HW guy"), all drivers has been reinstalled MANY times. When I try to add WLAN manually, Win7 says "Unexpected Error". Diagnostic tool from Intel says "Wireless hardware is not bound to transport driver". In Fn+F5 I see WiFi as off and I can't turn it on (unlike Bluetooth, which works well). Windows Diagnostics says there's an issue with a driver (sorry if I don't use exact words, my Win7 is not EN). I don't see this card anywhere in "ipconfig". There's no difference in diagnostics whether the wireless switch is on or off.
I read almost everything I was able to google about similar issues. I tried various drivers from both Lenovo (manual download from Lenovo website as well as using System Update) and Intel, both with and without Access Connections. I tried to remove the device from Device Manager and let Windows to find it again. I reinstalled LAN driver, tried to update BIOS (was already updated), tried to reset various stuff using "netsh" command, deleted Intel/Wireless dir in [username]/AppData, all this with/without reboots in between. Tried to play with card settings (in Device Manager), with power settings (both Windows and Power Manager), with on/off switch on a side of the laptop. I tried System Restore, which ended by error for all meaningful points. Nothing. All this on 3 different WLAN networks (2.4 GHz).
My last thought is to reinstall Windows from scratch, but it takes me at least 2 whole days to set everything up as I use a boatload of different work stuff for different customers.
My current WiFi driver, according to Driver tab in Device Manager for Intel Centrino Advanced-N 6205, is 15.4.1.1 from January 23, 2013 (thru System Update). The more current one from Intel is 15.7.0.3 from April 18, 2013.
Thank you in advance for any suggestions, tips or help.
EDIT
Just for the heck of it I switched wireless ON at home and suddenly my home WiFi network appeared in Win7 WiFi management (no AC). The last driver I installed was thru System Update, twice. Never restarted immediately, always after a while.
So I ran System Update again and it offered me available driver for WiFi (again!) and Access Connections. The online utility from Intel also offered me available drivers. I still have WiFi driver 15.4.1.1 (23.1.2013). To be honest I'm little affraid to update one or the other, as I did it so MANY times in past 30 hours with no effect.
The only difference I noticed is a new wireless device was available - Microsoft Virtual WiFi Miniport Adapter. It may be because of my Checkpoint Endpoint Security VPN software, but last time I saw this adapter was just before I lost all the wireless networks.
As much as I'm relieved it's working again, as a programmer I'm not happy about it, because I don't know WHY it's working now, when I didn't do anything for it since my last try. I only kept the wireless switch off for a fair amount of time.
Oh, and DPC latency stays below 300µs (up to 500µs is OK).hey smarmytime,
let me get this right
laptop+router+modem (via cable) = connection working fine
laptop+modem (via cable) = connection goes wonky
laptop+wireless = works halfway then poofs
The wireless of yours comes from a Router+Wifi or is it coming from a Modem+Wifi set ?
If it's coming from a Modem+Wifi set, then try the following.
1- turn off wireless
2- reset modem to factory setting (make sure wireless is off)
3- key in the necessary info to make a connection.
4. switch wifi off on laptop
5. connect laptop to modem via cable.
Does it connect ? Does it go poof halfway?
After that, turn on the wireless for both modem and laptop, try connecting again. Does it connect ? Does it go poof halfway?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Designjet 130. The printer prints not the right colors
Ru:
Принтер печатает не правильные цвета:
жёлтый - отсутствует (отображается белым), красный - печатает розовый, зелёный - печатает голубой. Калибровка не помогает. Все картриджи полны краски.
En:
The printer prints not the right colors : yellow - no (shown in white), red - prints pink, green - blue prints . Calibration does not help. All cartridges are filled with ink.This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Not able to go to the right resolution anymore..
Hi,
I'm experiencing the following problem:
Today I noticed that when I connected my 24" Samsung Syncmaster 245b to my macbook pro via vga-->MDP the big screen doesnt get its native resolution of 1920x1280px anymore.
Last time I connected my samsung screen it automatically picked the right resolution and there were no problems at all.
Now, I can't even pick the 1280x1920 resolution anymore in the display setup?
The biggest resolution I can pick for the samsung is 1920x1080..
Does anyone know how I can fix this big problem?
I need this big screen to edit my video's and its quite annoying to have to edit on a 15" screen suddenly.
Thanks in advance!
Greetings, RobinApparently the vga cable wasn't connected properly, the problem is fixed now.
Ty anyways
Maybe you are looking for
-
Why can't I change the color of the h1?
I'm working on a site and all of my CSS is working properly but I'm having trouble changing the color of the h1. I can change the font, the size, bold....everything EXCEPT the color. I duplicated my page and CSS and began to deconstruct the page ele
-
RGB, Luminosity, and Black Point
I have an image shot in a forest, with a footbridge over a stream and a path in it. It has a lot of green, naturally, and a few blown out places in addition to dark shadows. While I like it, I've always found it a little flat. Looking at the histogra
-
Power management schedule reset on startup. How do I stop this? Running 10.6
Having updated to 10.6. The power management schedule setting (created by eyetv) is reset/deleted when the mac mini powers up and shuts down before the scheduled event. How can I set the power management system to save the settings regardless of how
-
Hi all, Is there any other method to run a report in the background other than defining it in sm36...like any function module. thank you all, santosh Kotra.
-
Problem connecting to two different databases from form
Hi all, i am using 6i forms which needs to be connected to oracle 9i and 10g databases which is having different ip address(residing in different machines).i can connect to 10g database after configuring tnsnames.ora in my machine but still i cannot