[SOLVED] Xorg 1.6 with intel graphic corruption

Hi Arch community
frequently the part of graphic corruption in any application, see screenshot:
this fix (depend) when refresh section, or move mouse over this.
I have:
Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller
xorg 1.6 with xf86-video-intel-legacy
my xorg.conf:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
Option "DRI" "True"
Option "NoDDC" "True"
Option "XAANoOffscreenPixmaps" "True"
Option "XaaNoPixmapCache"
Option "EnablePageFlip" "True"
Option "RenderAccel" "True"
#Option "AccelMethod" "xaa"
Option "Tiling" "false"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "MIT-SHM" "Yes"
EndSection
please help, this problem is annoying
thanks {
Last edited by epsilom (2009-04-24 00:41:36)

andywxy wrote:
@epsilom
could you share your xorg.conf? I have the same problem with the compiz fusion as my WM, however, I didn't use xorg.conf.
Thank you!
first generate xorg.conf (see http://wiki.archlinux.org/index.php/Xorg ) and modify/add:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
Option "DRI" "True"
Option "RenderAccel" "True"
Option "ExaOptimizeMigration" "off"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I don't make public all my xorg.conf because is for my particular hadware 
Last edited by epsilom (2009-04-24 14:34:29)

Similar Messages

  • Is Flash CS4 not compatible with Intel Graphics (laptop)? Really?

    Hi!
    I'm graphic and animation designer. My company buys CS4 suite
    including Photoshop & Flash. And I'm buying a laptop and now
    choosing between one having Intel Graphics and another with ATI
    Radeon. Intel has some features I need, but after googling, finding
    and reading this topic:
    http://www.adobeforums.com/webx?14@@.59b6c473/0
    till the end, I see it does not fully support Photoshop
    CS4!!! I also need Flash CS4 working, so does it support Flash?
    So can you still recommend me buying intel integrated-laptop
    or should I take an ATI Radeon powered one? I need Flash working
    without annoying compatibilites problems. I don't want to buy an
    Intel one, if it is not Photoshop- and Flash- compatible....
    Thank you!

    Anne,
    > after googling, finding and reading this topic:
    >
    http://www.adobeforums.com/webx?14@@.59b6c473/0
    > till the end, I see it [an Intel chip] does not fully
    support
    > Photoshop CS4!!! I also need Flash CS4 working, so does
    > it support Flash?
    It's important you understand what "fully support" means in
    this
    context. According to Eric Palmer's Dec 4 reply (12:11pm),
    Photoshop CS4
    does, in fact, run reliably on systems with Intel graphics.
    Eric purports
    to be an Intel employee, but obviously there's no proof of
    that.
    Regardless, his assertion jibes with with I hear from
    colleagues with Intel
    graphics chips.
    It's not as if Photoshop suddenly fails if you happen to
    choose, say,
    red from the color swatches. It's not as if Photoshop fails
    to export GIFs
    on Intel machines. The only thing you're missing -- and this
    is true for me
    too, even though I don't have Intel equipment -- is
    functionality that
    relies on OpenGL. One of these features, for example, lets
    you rotate the
    canvas while you work on a file. I don't mean rotate the
    image itself ... I
    mean rotate the actual work space without resampling the
    image, just as if
    you were rotating the piece of paper on which you were
    drawing. Granted,
    that sounds like a neat feature (I'd like to experiment with
    it, myself!),
    but it's not a deal-breaker.
    As far as I've seen, the Flash CS4 authoring tool doesn't
    rely on any
    OpenGL-accelerated features.
    David Stiller
    Adobe Community Expert
    Dev blog,
    http://www.quip.net/blog/
    "Luck is the residue of good design."

  • KDE4 compositing no longer works with Intel graphics card

    I recently upgraded to the new intel graphics card drivers and when I started KDE4, I got a black screen. I disabled compositing through the kwinrc file, but I want it back! Here's my xorg.conf
    Section "ServerLayout"
            Identifier     "Xorg Configured"
            Screen      0  "Screen0" 0 0
            InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
            Option "AllowMouseOpenFail"  "true"
            Option "AIGLX" "true"
    EndSection
    Section "Module"
            Load  "ddc"  # ddc probing of monitor
            Load  "dbe"
            Load  "dri"
            Load  "extmod"
            Load  "glx"
            Load  "bitmap" # bitmap-fonts
            Load  "freetype"
            Load  "record"
    #       Load  "synaptics"
    EndSection
    Section "InputDevice"
            Identifier  "Keyboard0"
            Driver      "keyboard"
            Option      "CoreKeyboard"
            Option "XkbRules" "xorg"
            Option "XkbModel" "pc105"
            Option "XkbLayout" "gb"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
            Identifier "Monitor0"
            Option "DPMS" "true"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
            Identifier  "Card0"
            Driver      "intel"
    #       Driver      "vesa"
            VendorName  "All"
            BoardName   "All"
            Option      "XAANoOffscreenPixmaps" "true"
            Option      "DRI" "true"
    EndSection
    Section "Screen"
            Identifier "Screen0"
            Device     "Card0"
            Monitor    "Monitor0"
            DefaultColorDepth 24
            SubSection "Display"
                    Depth     24
                    Modes "1280x800" "1024x768" "800x600" "640x480"
            EndSubSection
    EndSection
    Section "DRI"
            Mode 0666
    EndSection
    Section "Extensions"
            Option "Composite" "Enable"
    EndSection
    and my Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH x86_64
    Current Operating System: Linux michael-laptop 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:44:59 CET 2008 x86_64
    Build Date: 26 January 2008 09:52:13AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 12 11:23:12 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (==) |-->Input Device "<default pointer>"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x7b0560
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2a00 card 14c0,0026 rev 0c class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,2a02 card 14c0,0026 rev 0c class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,2a03 card 14c0,0026 rev 0c class 03,80,00 hdr 80
    (II) PCI: 00:1a:0: chip 8086,2834 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1a:1: chip 8086,2835 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1a:7: chip 8086,283a card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1b:0: chip 8086,284b card 14c0,0026 rev 03 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,2830 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,2831 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,2832 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,2836 card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2815 card 0000,0000 rev 03 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,2850 card 14c0,0026 rev 03 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,2829 card 14c0,0026 rev 03 class 01,06,01 hdr 00
    (II) PCI: 00:1f:3: chip 8086,283e card 14c0,0026 rev 03 class 0c,05,00 hdr 00
    (II) PCI: 04:00:0: chip 14e4,1713 card 14c0,0026 rev 02 class 02,00,00 hdr 00
    (II) PCI: 0c:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
    (II) PCI: 0e:06:0: chip 1180,0832 card 14c0,0026 rev 05 class 0c,00,10 hdr 80
    (II) PCI: 0e:06:1: chip 1180,0822 card 14c0,0026 rev 22 class 08,05,00 hdr 80
    (II) PCI: 0e:06:2: chip 1180,0592 card 14c0,0026 rev 12 class 08,80,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,14), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
    [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
    [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
    [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xc3ffffff (0x4000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xcc000000 - 0xcdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
    [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
    [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
    [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
    (II) Bus 4 non-prefetchable memory range:
    [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[b]
    (II) Bus 4 prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:28:2), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
    [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
    [2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
    [3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 8: bridge is at (0:28:3), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 8 I/O range:
    [0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
    [1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
    [2] -1 0 0x00005800 - 0x000058ff (0x100) IX[b]
    [3] -1 0 0x00005c00 - 0x00005cff (0x100) IX[b]
    (II) Bus 8 non-prefetchable memory range:
    [0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[b]
    (II) Bus 8 prefetchable memory range:
    [0] -1 0 0xc8000000 - 0xc9ffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 10: bridge is at (0:28:4), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 12: bridge is at (0:28:5), (0,12,12), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 12 non-prefetchable memory range:
    [0] -1 0 0xf8200000 - 0xf82fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 14: bridge is at (0:30:0), (0,14,14), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 14 non-prefetchable memory range:
    [0] -1 0 0xf8300000 - 0xf83fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/20, 0xd0000000/28, I/O @ 0x1800/3
    (--) PCI: (0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/20
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "glx" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified inthe config file.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33
    (II) Primary Device is: PCI 00:02:0
    (--) Assigning device section with no busID to primary device
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 965GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [23] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [24] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [25] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [26] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [27] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [33] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [34] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [35] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [36] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [37] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [38] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "true"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xF8000000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)Crestline Graphics Chip Accelerated VGABIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)Crestline Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing on
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
    [1] 0 0 0xf8000000 - 0xf80fffff (0x100000) MS[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [7] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [8] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [9] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [10] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [11] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [12] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [13] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [14] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [15] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [16] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [27] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [28] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [29] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [30] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [31] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [36] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [37] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [38] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [39] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [40] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [41] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 238592 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 954364 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Success.
    (II) intel(0): [drm] Registers = 0xf8000000
    (II) intel(0): [drm] ring buffer = 0xd0000000
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
    (II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
    (II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
    (II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xd0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) evaluating device (<default pointer>)
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1304 1336 1408 800 801804 813 -hsync -vsync (48.9 kHz)
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) 3rd Button detected: disabling emulate3Button
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2fff9000
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) 3rd Button detected: disabling emulate3Button
    Last edited by miggols99 (2008-02-12 14:50:38)

    Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
    The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
    Last edited by May-C (2008-02-13 01:16:48)

  • Issues with intel graphics

    Hello everybody.
    I recently installed arch on my new laptop (lenovo z460, core i3, intel graphics), and I'm facing issues with graphics: every time I execute some 3D application the X is crashing.
    I use kde4 as window manager, but did a test on gnome and faced the same issue there, so it does not look like a WM issue.
    The applications I tested so far are the video players using gl as video output and games like openarena. Video players using xv as video output with composite disabled runs well.
    Searching on the forum, I saw an old post with an issue similar to mine, saying that this is an issue introduced in ligbl 7.4.2, but I cannot even downgrade to this version since I cannot find it anymore.
    One more information that may help, I did a try with arch 32 and 64 and faced issues on both, but I also tried on kubuntu 10.04 LTS and this issue does not happen there. Unfortunately I am not that experient to understand the differences and find a solution
    Do you guys have any ideas on how to fix this issue? I really don't wanna use kubuntu...
    Thanks

    Kubuntu likely has older versions of Xorg and the intel driver. If you look into /var/log/Xorg.0.log on both Arch and Kubuntu, it should be possible to find out which version works and which don't. You can then see if you can find the working version in the repositories.

  • Add integrated graphics to a laptop only with Intel graphics

    hi
    i have hp 4530s with Product Number: xu015ut#aba.
    Can I add a graphics card to my laptop(ati or nvidia)?
    This question was solved.
    View Solution.

    Hi:
    Only if you replace the entire motherboard, which would cost as much as buying a new notebook with the graphics solution you want.

  • Nvidia 7300/7600gt desktop users with Aperture graphic corruption read:

    Not promising anything, but consider installing the January 19, 2010 "Graphics Firmware Update 1.0 (iMac and Mac Pro) compatibility with Windows 7" then perform a restart as per the installer. Then restart while resetting PRAM (I have done this numerous times before this update, so don't even think of suggesting this was the fix) and then shut down for good measure and reboot again....what the ****....
    EXPLANATION:
    I have a new HD, new RAM, new clean Aperture and OS install. I have been trying to determine the source of my woes for months. I also performed a complete check of the innards of my machine (checking voltages, yanking mother boards and GPU board for visual inspections, capacitor failures, connections, traces, etc......all to prove everything looked great with little dust) But I still had issues.
    For kicks, even though I am not running WIndows 7 or BootCamp (I use VMWare for XP Pro) I updated the graphics firmware in my computer. It says: "Download and install the Graphics Firmware Update 1.0 IF YOU RUN WINDOWS 7 using Boot Camp on your iMac (with NVIDIA GeForce 7300 or 7600 GT) or Mac Pro (with NVIDIA GeForce 7300 GT or Quadro FX 4500) computer." (Capital emphasis mine) Furthermore, some descriptions I have seen for this refer to "early 2008" models...clearly not mine...though Apple, to my knowledge, never made iMacs in 2008 with a 7300/7600 GT card. They were produced in 2006 and early 07.
    I originally assumed this update was not required or recommended for those of us NOT using WIndows 7 (and perhaps this assumption is correct, technically). Well, I did the update, and since performing this update...I am nervous to even suggest this....I see the graphic corruption has not occurred while making adjustments. I have even used screen sharing with Aperture in full screen mode with success....crazy, I know.
    This is...so far...a miracle. It also proves in my twisted dementia and euphoria, that it was NOT (here comes the jinx) hardware failure related, but rather a driver or firmware issue. (of course you will see a follow up about how this was an awful idea plagued with problems and no fix for Aperture....but be patient, all good drama needs time)
    Let me be clear, the update never popped up via software update and the update itself says it is for windows 7 boot camp users of which I am NOT...
    The ROM Revision # has changed in "About This Mac" TO 3467 FROM 3021. I cannot necessarily suggest this was a fix (I have done nothing else, however, to my computer since), but it seems to have worked so far. I have no idea how to roll back this firmware if you should try this, not succeed and suffer problems. But for the risk-takers (not sure how risky this is for the described users) it's worth a shot. Post your experience via this thread, just to confirm if I am imagining this....
    Message was edited by: lovinmymac

    Clem wrote:
    Does it still crash if you change your directory that you are exporting to, but leave it in icon mode?
    Yes. I just checked, and the 2nd try it crashed when in icon mode to another than the usual directory. Usually I export to the Desktop, now I exported to the home-dir.
    Are there other images or pdfs of interesting items in the directory?
    My Desktop is usually empty. I tried again exporting random images one by one removing each exported image in between, and after around six times it crashed. So I would say: No.
    Do the icon size or text settings have an effect on if you crash or not?
    I have tried with 2 sizes 64x64 and 128x128 with the same result: Crash. So I would say No, but I haven't tried all icon sizes.

  • Blanking remote with Intel Graphic HD = hang

    Hi, after a few test there seem to be a bug with the remote management and when we blank the screen, or if we use the remote diagnostic (which blank the screen) with the latest Intel Graphics HD that come with the Dell Optiplex 7010.
    The remote become unusable, one click take about 1 minute to do!!
    I tested the same workstation with an addon graphics display (AMD Radeon) and the remote is ok.
    The workstations are Windows XP, and we have ZCM 11.2.3a on both servers and workstations.
    Does someone saw this bug?
    thanks
    Eric.

    My guess would be the Intel Graphics Driver is not working properly with
    the Mirage/Mirror Driver used for optimization.
    Try one or both of these methods to disable the Mirage/Mirror Driver.
    http://www.novell.com/support/kb/doc.php?id=7013470
    or
    http://www.novell.com/support/kb/doc.php?id=7005102
    If that helps, you could try updating the Video Card Driver to see if it
    helps.
    The Mirage Driver is Open Source and generally up to date.
    You could TRY updating it with the one here...
    http://www.demoforge.com/dfmirage.htm
    However, I have never seen a case where the newer Mirage Driver helps.
    It normally seems to come down to fixes in the Graphics Card driver
    fixing Mirror Driver support. (Mirage is a Specific Mirror Driver.)
    On 12/5/2013 1:56 PM, eric pouliot wrote:
    >
    > Hi, after a few test there seem to be a bug with the remote management
    > and when we blank the screen, or if we use the remote diagnostic (which
    > blank the screen) with the latest Intel Graphics HD that come with the
    > Dell Optiplex 7010.
    > The remote become unusable, one click take about 1 minute to do!!
    >
    > I tested the same workstation with an addon graphics display (AMD
    > Radeon) and the remote is ok.
    >
    > The workstations are Windows XP, and we have ZCM 11.2.3a on both servers
    > and workstations.
    >
    > Does someone saw this bug?
    >
    > thanks
    > Eric.
    >
    >

  • Choppy and Laggy especially Ichat on C2D Imac with intel graphics

    Last night I upgraded from 10.4.10 to leopard on my Imac C2D. Now my Imac has the integrated Intel graphics and not a fully fledged Ati but this has never been an issue before as Tiger was always nippy. I have 1.256mb ram, due to having a 1GB stick and a 256MB.
    I performed an upgrade install and it all went fine. Initially though the system was very laggy and choppy, especially when using the dock, coverflow and even screensavers. Having used coverflow extensively in Itunes I can say it was never an issue before. I then decided to check out Ichat. Ichat was extremely choppy in particular with its video capture which lagged several seconds behind and even dropped frames. When I tried the effects these were about the same, no worse really and the background substitution effects worked very poorly with most of me missing.
    I rebooted after installing the second wave of updates for Leopard and there was a significant increase in performance but its still choppy in places. I’m not sure if it’s due to my integrated graphics and wondered had anyone else had a similar issue, such as Macbook or Mac Mini users?
    I’ve ordered a second 1GB stick from Crucial and hope this will bottom out any potential memory bottleneck but can’t help worrying it’s the Intel graphics. Would Apple seriously use Intel graphics only to release a OS which struggles with it?

    In part thats a relief. I did not move over to Tiger until is was 10.4.6 to ensure stability and was always pleased with its performance. In truth Leopard works fine but graphically it does seem to have speed issues which i had put down to the GMA Intel graphics.
    I really find Ichat and coverflow the worst afflicated and notice the minimal slow down I'm guessing more due to the excellent performance I had previously in Tiger.
    In Ichat the video effects are terrible and the interactive rear screen fail to detect me properly. In coverflow in the finder the delay is less noticable but you can see the icons sharpen up after a second or two.
    Hopefully Apple will sort this out shortly.

  • Graphic failure with Intel Graphics

    Hi!
    I got my new MBP 15" i7 two weeks ago and installed all updates that were available.
    I have noticed that if I watch movies in fullscreen mode with the Intel gfxCard and a Growl message appears or if I move my mouse cursor to the hidden dock some graphic failures show up:
    http://img.skitch.com/20100904-by9mfjq6uantsn752ftjc9sg1b.jpg
    This also happens in screensaver if any popup (growl...) appears.
    Thanks a lot!
    StonerL

    Are you forcing the computer to stay on the intel graphics chip with a program (like gfxCardStatus)?
    I have the same computer, but for anything other than simple internet browsing my computer automatically switches to the dedicated nVidia card. As soon as I put up a full screen video or even an app like MS Word it switches cards.

  • [SOLVED] Xorg won't start - Intel Sandy Bridge graphics

    Did a fresh install of Arch on my laptop last night, looking to use the window manager i3 which I have installed but when i run "exec i3" it logs me out, indicating some sort of failure in the session. Tried "startx" and noticed that didn't work either.
    "grep EE /var/log/Xorg.0.log" shows me the following errors in the log:
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (EE) Failed to load module "modesetting" (module does not exist, 0)
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    Extensively read the Intel and Xorg pages on the wiki and googled for an hour or two, tried to create some custom configurations for Xorg but nothing has worked so far.
    It appears to be some issue with the driver in combination with Xorg. I've tried updating, then uninstalling and reinstalling the packages (the three Xorg packages + Intel driver) and specifying what driver and acceleration mode Xorg should use (intel and sna). No luck so far.
    Anyone here who is having the same problem or know the solution?
    Last edited by olger (2013-02-24 19:45:22)

    Gusar wrote:Not really, because if nothing is configured (and the defaults of xterm and twm aren't installed), X will simply quit, and people will ask what's wrong even though things are fine.
    Well maybe I am asking the wrong question then, because I think that might be exactly whats happening. I think maybe my problem is simply related to the window manager, i3.
    Here's a link to my log anyways, if anyone wants to take a look and help me exclude Xorg from the list of potential causes:
    https://gist.github.com/anonymous/f85c2a1f2a0319198a09
    My original problem was that running "exec i3" gives me a blank screen followed by the login screen. I remember running "startx" at another installation I was troubleshooting and getting the very basic Xorg interface, but I dont have xterm or twm installed right now so thats probably why it's just shutting down when I run "startx".

  • Gnome 3 vertical lines with intel graphics

    EDIT: The lines initially went away, but returned after a few hours. Not solved actually. I will test kernel 3.19, as ugjka stated it will be fixed there and see if that works.
    I had this thread typed out, and then I thought I should check whether the xorg drivers were installed (they weren't). I installed them, and the problem appears to have gone away. I'm going to post this anyway in case someone has the same issue.
    What I've found works: Install xf86-video-intel (run 'sudo pacman -Syu xf86-video-intel')
    Original issue:
    I'm not sure if this is a GNOME issue or an Arch issue (Probably GNOME). The system is a Dell Inspiron 1525 from ~2009
    Here's my graphics info from lspci:
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
    I've found some people with similar issues on Ubuntu who are using Radeon graphics, Here's a thread, Here's a bug report.
    Last edited by adril (2015-03-17 19:16:08)

    https://bugs.freedesktop.org/show_bug.cgi?id=28813 Will be fixed in kernel 3.19

  • [SOLVED] GL Apps Segfault with intel Driver

    New arch linux user here, recent convert from gentoo Loving it so far, spectacular operating system. Not building everything from source is a beautiful thing
    However, it seems that GL doesn't like me... After I had Xorg in a state where everything seemed to be working, I decided to give glxgears a run, and boom: "Segmentation Fault." So, I tried to install a game which used GL, picked torcs, tried running it... "Segmentation fault."
    After playing with all manner of xorg.conf options, reading the log file and googling like mad, I'm completely lost. Everything looks fine, up until the segfault.
    Here's the xorg.conf, (with a good bunch of options i tossed in to try to fix it...) :
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dbe"
    Load "dri"
    Load "dri2"
    Load "extmod"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    Option "NoDDC" "True"
    Option "DRI" "True"
    Option "AccelMethod" "UXA"
    Option "RenderAccel" "True"
    Option "EnablePageFlip" "True"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Modes "1366x768"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    ...and the logfile:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.1.902 (1.7.2 RC 2)
    Release Date: 2009-11-20
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.31-ARCH x86_64
    Current Operating System: Linux alice 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64
    Kernel command line: BOOT_IMAGE=arch ro root=/dev/sda4 i915.modeset=1
    Build Date: 21 November 2009 05:05:05PM
    Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 26 20:30:25 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AIGLX" "True"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x7c1ca0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:107b:0704 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:2a43:107b:0704 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0400000/1048576
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.9.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    (II) Primary Device is: PCI 00@00:02:0
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "True"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    (--) intel(0): Chipset: "GM45"
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output DVI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): Output DP2 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output DVI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Output DP2 disconnected
    (II) intel(0): Using user preference for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1366x768
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): video overlay key set to 0x101fe
    (**) intel(0): Display dimensions: (433, 243) mm
    (**) intel(0): DPI set to (80, 80)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "dri2"
    (II) LoadModule: "dri2"
    (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: DRI2 Enabled
    (WW) intel(0): Option "NoDDC" is not used
    (WW) intel(0): Option "AccelMethod" is not used
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (WW) intel(0): Option "DPI" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    record: RECORD extension enabled at configure time.
    record: This extension is known to be broken, disabling extension now..
    record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 361 x 203
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 2.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) Synaptics touchpad driver version 1.2.0
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) config/hal: Adding input device CNF7129
    (**) CNF7129: always reports core events
    (**) CNF7129: Device: "/dev/input/event9"
    (II) CNF7129: Found keys
    (II) CNF7129: Configuring as keyboard
    (II) XINPUT: Adding extended input device "CNF7129" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event8"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event7"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event2"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    (II) intel(0): EDID vendor "AUO", prod id 4332
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1486 768 771 775 806 -hsync -vsync (48.5 kHz)
    I am using kernel modesetting, which could perhaps be related... The thing is, everything else seems to work perfectly fine, which leads me to believe it's some obscure config issue i've just completely missed somewhere along the line.
    Any ideas? any help would be highly appreciated
    Last edited by decibelmute (2009-11-28 01:23:03)

    Haha, worked like a charm
    Many thanks

  • [SOLVED] No brightness control with Intel!

    Hi, i bought a new motherboard (Asus Z87-K) and a i7 4770k. In the processor box are witten that it have a Intel HD Graphics 4600 GPU.
    I have never used a UEFI motherboard before and i passed all the day trying to configure the UEFI boot! ( im using gummiboot)
    With the system instaled, i too installed the xf68 intel drivers. But i realized that that i cant control the brightness. So i tryed to do it mannualy editing the /sys/c ass/backlight/* archive. But in this folder don't have the intel folder, just an acpi_video0 folder, and when i edit it anything happen .
    In my older notebook with a intel graphis, just edit the archive are the solution, but now it dont help.
    I too tried xbacklight, and i receive the message.
    # xbacklight +20%
    No outputs have backlight property
    The strange thing is that my lscpi output show me this:
    $ lscpi | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
    I readed something about boot configuration, but im noot using GRUB, and they say to add some paramethers to boot script.
    I'm using HDMI!
    Right now, anything solved my problem.
    Henrique Lengler
    Last edited by henriqueleng (2014-02-19 00:11:50)

    Your old computer was a laptop with integrated display, and your new computer is a desktop with external monitor, right? As far as I know, you cannot control a monitor's backlight through a standard video interface. Laptops can use /sys/class/backlight because they have a direct connection to the backlight hardware. If the monitor's built in controls do not lower the brightness sufficiently, then there is not much else you can do. There may be software methods to lower the overall brightness (I know nvidia can do this), but that is not the same as lowering the backlight and may hurt the image quality.

  • [Solved]Xorg 1.6 with nvidia 180.44 2D performance painfully slow

    Hi folks,
    Since the latest upgrade of Xorg and Nvidia all screen refreshes have become visibly very slow. Anything that has to redraw the whole screen takes a full second and my cpu usage jumps to 15%. The wierd thing is that glxgears is getting 200fps and looks perfectly smooth. Direct rendering is enabled and the client and server versions of the driver match. There are no errors in the Xorg.0.log apart from warnings about ACPI
    I am using an Nvidia 6200 in TwinView mode with 2 identical monitors.
    Here's my files/logs:
    xorg.conf:
    # nvidia-settings: version 1.0 (buildmeister@builder63) Tue Nov 4 14:08:09 PST 2008
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    # Load "type1"
    # Load "freetype"
    Load "glx"
    EndSection
    Section "ServerFlags"
    # Removed Option "Xinerama" "1"
    Option "AutoAddDevices" "false"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "gb"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "TEU TL970"
    HorizSync 30.0 - 81.0
    VertRefresh 40.0 - 76.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "TEU TL970"
    HorizSync 30.0 - 81.0
    VertRefresh 40.0 - 76.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 6200"
    Option "NoDRI"
    EndSection
    Section "Screen"
    # Removed Option "TwinView" "0"
    # Removed Option "TwinViewXineramaInfoOrder" "CRT-0"
    # Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "1"
    Option "TwinViewXineramaInfoOrder" "CRT-1"
    Option "metamodes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
    Option "NoLogo" "True"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    #Section "Extensions"
    # Option "Composite" "Enable"
    #EndSection
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux vostok 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 11:11:42 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) Option "Xinerama" "0"
    (**) Option "AutoAddDevices" "false"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI: (0@3:0:0) Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) rev 2, Mem @ 0xe0000000/16777216, 0xe3800000/16384, 0xe3000000/8388608, BIOS @ 0x????????/65536
    (--) PCI:*(0@10:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe1000000/16777216, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 180.44 Mon Mar 23 15:29:02 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) NVIDIA dlloader X Driver 180.44 Mon Mar 23 15:05:32 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 0a@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "True"
    (**) NVIDIA(0): Option "TwinView" "1"
    (**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
    (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:10:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.44.a2.10.52
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:10:0:0:
    (--) NVIDIA(0): TEU TL970 (CRT-0)
    (--) NVIDIA(0): TEU TL970 (CRT-1)
    (--) NVIDIA(0): TEU TL970 (CRT-0): 400.0 MHz maximum pixel clock
    (--) NVIDIA(0): TEU TL970 (CRT-1): 400.0 MHz maximum pixel clock
    (**) NVIDIA(0): TwinView enabled
    (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, CRT-1
    (II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0):
    (II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
    (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
    (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) NVIDIA(0): configuration option may not be set correctly. When the
    (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Setting mode
    (II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (WW) NVIDIA(0): Option "NoDRI" is not used
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/psaux"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/psaux"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/psaux"
    (**) Option "Emulate3Buttons" "no"
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse0: ZAxisMapping: buttons 4 and 5
    (**) Mouse0: Buttons: 9
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    Thanks for your kind attention.
    Last edited by sekenre (2009-04-14 16:48:38)

    Dheart wrote:glxinfo | grep direct ?
    Also try to run some game to see whether it will work.
    Already done:
    direct rendering: Yes
    And I'm at work, no games sorry
    I lowered the colour depth to 16bpp and it's a little bit faster on window refreshes. It's good enough to be usable but it's still annoying.

  • [Xorg] Black screen with 2nd graphic card

    Hi !
    I'm a french (Sorry for my English) and new on ArchLinux.
    I have a problem with my laptop, he have 2 graphics cards, the first one is an ATI Mobility Radeon HD4200 series and the second it's an ATI Radeon HD 5650.
    The problem is when I want to use the second card,  I have a black screen when I start X. It's the same problem with ATI driver and xf86-video-ati driver even if my card is detected with "lspci" and by "aticonfig --list-adapters" with catalyst driver.
    If you need, this is my Xorg log :
    Xorg.log with catalyst
    Xorg.log with free driver
    And if you want  my xorg.conf , very basic.
    Thanks for your help.

    https://bbs.archlinux.org/viewtopic.php … 6#p1133766 FGLRX Configuration
    I use one card and found I needed catalyst-dkms pkg as well as catalyst & catalyst-utils
    Hope this helps.
    Last edited by ackt1c (2012-11-27 15:37:05)

Maybe you are looking for

  • Delivery credit check

    Dear friends I have analyzed one customer, at present time During Sales order creation credit limit checking, we have created one sales order in development server with credit limit... We cannot make the delivery for that sales order. Now we have rem

  • Installation of ECC 6.0

    Hi guys I am about to install Swedish Baseline 2.6 and that is on top of a SAP ECC 6.0 installation. Question I have is exactly where do I found ECC 6.0 installation? My guess is that it is a part of Netweaver 7.0 but when downloading "Installation M

  • Rundll32.exe has stopped responding

    When I install Ghost v14 on the T500, after reboot the DVD drive has a yellow exclamation mark on it with "the device is not responding properly" and an error pops up with "rundll32.exe has stopped responding", and also the power Manager icon on the

  • This regarding cheque printing with advice

    hi experts This regarding cheque printing with advice i am using standard driver progarm : RFFOUS_C                 standard layout             :F110_MX_CHEQUE(which is modified as per clients layout) In advice the line items (i.e) inv no ref no inv

  • Oracle taking a strange query execution path

    I have a query which is admittedly a bit unconventional but Oracle is really doing something strange with it... SELECT   GROUP_CODE, STATUS, COL3, COL4, ETC... FROM MAIN_TABLE A WHERE A.STATUS = 'COMPLETE' -- ONLY GET COMPLETE RECORDS...     -- AND O