[SOLVED]Xorg 1.8 doesn't work

Hello, I've just upgraded to linux-firmware and the newest X.org, which doesn't work.
Xorg.0.log tells me:
[ 934.318]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[ 934.322] X Protocol Version 11, Revision 0
[ 934.323] Build Operating System: Linux 2.6.33-ARCH x86_64
[ 934.325] Current Operating System: Linux staerseus 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 934.326] Kernel command line: root=/dev/disk/by-uuid/727c4683-ee4c-4b32-8a59-370264cb7d9f ro i915.modeset=1 init=/sbin/bootchartd
[ 934.327] Build Date: 26 May 2010 07:50:07PM
[ 934.329]
[ 934.330] Current version of pixman: 0.18.2
[ 934.331] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 934.334] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 934.338] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 21 10:15:38 2010
[ 934.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 934.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 934.343] (==) No Layout section. Using the first Screen section.
[ 934.343] (==) No screen section available. Using defaults.
[ 934.343] (**) |-->Screen "Default Screen Section" (0)
[ 934.343] (**) | |-->Monitor "<default monitor>"
[ 934.343] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 934.343] (==) Automatically adding devices
[ 934.343] (==) Automatically enabling devices
[ 934.343] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 934.343] Entry deleted from font path.
[ 934.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 934.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 934.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 934.343] (II) Loader magic: 0x7ce880
[ 934.343] (II) Module ABI versions:
[ 934.343] X.Org ANSI C Emulation: 0.4
[ 934.343] X.Org Video Driver: 7.0
[ 934.343] X.Org XInput driver : 9.0
[ 934.343] X.Org Server Extension : 3.0
[ 934.352] (--) PCI:*(0:0:2:0) 8086:2a42:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 934.352] (--) PCI: (0:0:2:1) 8086:2a43:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2100000/1048576
[ 934.352] (II) Open ACPI successful (/var/run/acpid.socket)
[ 934.352] (II) LoadModule: "extmod"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 934.352] (II) Module extmod: vendor="X.Org Foundation"
[ 934.352] compiled for 1.8.1, module version = 1.0.0
[ 934.352] Module class: X.Org Server Extension
[ 934.352] ABI class: X.Org Server Extension, version 3.0
[ 934.352] (II) Loading extension MIT-SCREEN-SAVER
[ 934.352] (II) Loading extension XFree86-VidModeExtension
[ 934.352] (II) Loading extension XFree86-DGA
[ 934.352] (II) Loading extension DPMS
[ 934.352] (II) Loading extension XVideo
[ 934.352] (II) Loading extension XVideo-MotionCompensation
[ 934.352] (II) Loading extension X-Resource
[ 934.352] (II) LoadModule: "dbe"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 934.352] (II) Module dbe: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension DOUBLE-BUFFER
[ 934.353] (II) LoadModule: "glx"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 934.353] (II) Module glx: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (==) AIGLX enabled
[ 934.353] (II) Loading extension GLX
[ 934.353] (II) LoadModule: "record"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 934.353] (II) Module record: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.13.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension RECORD
[ 934.353] (II) LoadModule: "dri"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 934.353] (II) Module dri: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension XFree86-DRI
[ 934.354] (II) LoadModule: "dri2"
[ 934.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 934.354] (II) Module dri2: vendor="X.Org Foundation"
[ 934.354] compiled for 1.8.1, module version = 1.2.0
[ 934.354] ABI class: X.Org Server Extension, version 3.0
[ 934.354] (II) Loading extension DRI2
[ 934.354] (==) Matched intel as autoconfigured driver 0
[ 934.354] (==) Matched vesa as autoconfigured driver 1
[ 934.354] (==) Matched fbdev as autoconfigured driver 2
[ 934.354] (==) Assigned the driver to the xf86ConfigLayout
[ 934.354] (II) LoadModule: "intel"
[ 934.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.354] (II) Module intel: vendor="X.Org Foundation"
[ 934.354] compiled for 1.7.6, module version = 2.11.0
[ 934.354] Module class: X.Org Video Driver
[ 934.354] ABI class: X.Org Video Driver, version 6.0
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)
[ 934.356] (II) UnloadModule: "intel"
[ 934.356] (II) Unloading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.356] (EE) Failed to load module "intel" (module requirement mismatch, 0)
[ 934.357] (II) LoadModule: "vesa"
[ 934.357] (WW) Warning, couldn't open module vesa
[ 934.357] (II) UnloadModule: "vesa"
[ 934.357] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 934.359] (II) LoadModule: "fbdev"
[ 934.359] (WW) Warning, couldn't open module fbdev
[ 934.359] (II) UnloadModule: "fbdev"
[ 934.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 934.360] (EE) No drivers available.
[ 934.362]
Fatal server error:
[ 934.364] no screens found
[ 934.365]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 934.370] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 934.372]
What does the problem with modules mean? Archlinux was warning me, that "in future releases /etc/modprobe.d/framebuffer_blacklist.conf.save will be ignored, but it is the same file as /etc/modprobe.d/framebuffer_blacklist.conf.
I don't understand, why it cannot find any screens (I use a laptop screen)
I tried to start with and without xorg.conf, which is:
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
The graphic driver I use is xf86-video-intel-newest from archstuff, but it is the same version as xf86-video-intel.
I am not sure if I provided all needed info, but I hope so. Thank you for your help.SOLVED
Last edited by Staerseus (2010-06-21 09:18:03)

Use the arch version.   It is actually built against the xorg version that you are using...  here is the relevant section of your log:
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)

Similar Messages

  • [SOLVED] - xset at startup doesn't work

    I use the following command to set my screensaver options
    xset dpms 30 60 300
    After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
    Contents of xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "StandbyTime" "2"
    Option "SuspendTime" "3"
    Option "OffTime" "5"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Dell Inspiron 1520 WXGA+ LCD"
    VendorName "Dell"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/input/mouse0"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    Option "CircularScrolling" "1"
    Option "CircScrollTrigger" "0"
    EndSection
    Section "ServerFlags"
    Option "DontZap" "false"
    Option "BlankTime" "0.1"
    Option "StandbyTime" "0.5"
    Option "SuspendTime" "1"
    Option "OffTime" "5"
    EndSection
    Contents of ~/.xprofile
    xset dpms 30 60 300
    I even added this to crontab
    0 * * * * ~/Wallpapers/change-background-folder.py
    0 * * * * /usr/bin/xset s 30
    0 * * * * /usr/bin/xset dpms 60 120 300
    @reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
    @reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
    @reboot ID=vu AFTER=1m vuze
    Still after doing all this, when I give xset q after a reboot, I get
    [theta@boolean-pc ~]$ xset q
    Keyboard Control:
    auto repeat: on key click percent: 0 LED mask: 00000000
    XKB indicators:
    00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
    03: Compose: off 04: Kana: off 05: Sleep: off
    06: Suspend: off 07: Mute: off 08: Misc: off
    09: Mail: off 10: Charging: off 11: Shift Lock: off
    12: Group 2: off 13: Mouse Keys: off
    auto repeat delay: 500 repeat rate: 30
    auto repeating keys: 00ffffffdffffbbf
    fadfffefffedffff
    9fffffffffffffff
    fff7ffffffffffff
    bell percent: 50 bell pitch: 400 bell duration: 100
    Pointer Control:
    acceleration: 3/1 threshold: 4
    Screen Saver:
    prefer blanking: yes allow exposures: yes
    timeout: 600 cycle: 600
    Colors:
    default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
    Font Path:
    /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
    DPMS (Energy Star):
    Standby: 0 Suspend: 0 Off: 0
    DPMS is Enabled
    Monitor is On
    Font cache:
    Server does not have the FontCache Extension
    The parameters are still all 0.
    Please suggest a solution.
    Apoorv
    Last edited by theta (2011-08-02 15:56:06)

    jasonwryan wrote:
    If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
    (sleep 15s && xset dpms 30 60 300) &
    exec yourwm
    That may get around the problem bernarcher describes...
    Thank you! This works very well for me.
    It's the only way I can get it to work.
    For the records, so the smart people can find the problem, here is my xorg.conf:
    Section "ServerLayout"
    Identifier "ServerLayout0"
    Screen 0 "BenQ" 0 0
    #Option "BlankTime" "0"
    Option "StandbyTime" "10"
    Option "SuspendTime" "20"
    Option "OffTime" "30"
    EndSection
    Section "Screen"
    Identifier "BenQ"
    Device "Intel4000"
    Monitor "HDMI2"
    DefaultDepth 24
    SubSection "Display"
    #Depth "24"
    EndSubSection
    EndSection
    Section "Monitor"
    Identifier "HDMI2"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "Intel4000"
    Driver "intel"
    BusID "PCI:0:2:0"
    Option "AccelMethod" "sna"
    Option "TearFree" "true"
    EndSection
    # Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
    Section "InputClass"
    Identifier "system-keyboard"
    MatchIsKeyboard "on"
    Option "XkbLayout" "se"
    EndSection
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
    $ xset -q
    Keyboard Control:
    auto repeat: on key click percent: 0 LED mask: 00000002
    XKB indicators:
    00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
    03: Compose: off 04: Kana: off 05: Sleep: off
    06: Suspend: off 07: Mute: off 08: Misc: off
    09: Mail: off 10: Charging: off 11: Shift Lock: off
    12: Group 2: off 13: Mouse Keys: off
    auto repeat delay: 500 repeat rate: 33
    auto repeating keys: 00ffffffdffffbbf
    fadfffefffedffff
    9fffffffffffffff
    fff7ffffffffffff
    bell percent: 50 bell pitch: 400 bell duration: 100
    Pointer Control:
    acceleration: 2/1 threshold: 4
    Screen Saver:
    prefer blanking: yes allow exposures: yes
    timeout: 0 cycle: 0
    Colors:
    default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
    Font Path:
    /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
    DPMS (Energy Star):
    Standby: 0 Suspend: 0 Off: 0
    DPMS is Enabled
    Monitor is On
    And the xorg log:
    [ 17738.153]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 17738.194] X Protocol Version 11, Revision 0
    [ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
    [ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
    [ 17738.254] Build Date: 14 April 2014 08:39:09AM
    [ 17738.269]
    [ 17738.285] Current version of pixman: 0.32.4
    [ 17738.314] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
    [ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
    [ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 17738.406] (==) ServerLayout "ServerLayout0"
    [ 17738.406] (**) |-->Screen "BenQ" (0)
    [ 17738.406] (**) | |-->Monitor "HDMI2"
    [ 17738.406] (**) | |-->Device "Intel4000"
    [ 17738.406] (**) Option "StandbyTime" "10"
    [ 17738.406] (**) Option "SuspendTime" "20"
    [ 17738.406] (**) Option "OffTime" "30"
    [ 17738.406] (==) Automatically adding devices
    [ 17738.406] (==) Automatically enabling devices
    [ 17738.406] (==) Automatically adding GPU devices
    [ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 17738.406] Entry deleted from font path.
    [ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 17738.406] Entry deleted from font path.
    [ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 17738.406] Entry deleted from font path.
    [ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 17738.406] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 17738.406] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 17738.406] (II) Loader magic: 0x804c80
    [ 17738.406] (II) Module ABI versions:
    [ 17738.406] X.Org ANSI C Emulation: 0.4
    [ 17738.406] X.Org Video Driver: 15.0
    [ 17738.406] X.Org XInput driver : 20.0
    [ 17738.406] X.Org Server Extension : 8.0
    [ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
    [ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 17738.424] Initializing built-in extension Generic Event Extension
    [ 17738.439] Initializing built-in extension SHAPE
    [ 17738.454] Initializing built-in extension MIT-SHM
    [ 17738.468] Initializing built-in extension XInputExtension
    [ 17738.482] Initializing built-in extension XTEST
    [ 17738.495] Initializing built-in extension BIG-REQUESTS
    [ 17738.509] Initializing built-in extension SYNC
    [ 17738.523] Initializing built-in extension XKEYBOARD
    [ 17738.536] Initializing built-in extension XC-MISC
    [ 17738.548] Initializing built-in extension SECURITY
    [ 17738.561] Initializing built-in extension XINERAMA
    [ 17738.573] Initializing built-in extension XFIXES
    [ 17738.585] Initializing built-in extension RENDER
    [ 17738.597] Initializing built-in extension RANDR
    [ 17738.608] Initializing built-in extension COMPOSITE
    [ 17738.620] Initializing built-in extension DAMAGE
    [ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
    [ 17738.643] Initializing built-in extension DOUBLE-BUFFER
    [ 17738.654] Initializing built-in extension RECORD
    [ 17738.665] Initializing built-in extension DPMS
    [ 17738.677] Initializing built-in extension Present
    [ 17738.688] Initializing built-in extension DRI3
    [ 17738.700] Initializing built-in extension X-Resource
    [ 17738.711] Initializing built-in extension XVideo
    [ 17738.722] Initializing built-in extension XVideo-MotionCompensation
    [ 17738.734] Initializing built-in extension XFree86-VidModeExtension
    [ 17738.746] Initializing built-in extension XFree86-DGA
    [ 17738.757] Initializing built-in extension XFree86-DRI
    [ 17738.769] Initializing built-in extension DRI2
    [ 17738.769] (II) "glx" will be loaded by default.
    [ 17738.769] (II) LoadModule: "dri2"
    [ 17738.769] (II) Module "dri2" already built-in
    [ 17738.769] (II) LoadModule: "glamoregl"
    [ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 17738.770] compiled for 1.15.0, module version = 0.6.0
    [ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 17738.770] (II) LoadModule: "glx"
    [ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 17738.770] (II) Module glx: vendor="X.Org Foundation"
    [ 17738.770] compiled for 1.15.1, module version = 1.0.0
    [ 17738.771] ABI class: X.Org Server Extension, version 8.0
    [ 17738.771] (==) AIGLX enabled
    [ 17738.782] Loading extension GLX
    [ 17738.782] (II) LoadModule: "intel"
    [ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 17738.782] (II) Module intel: vendor="X.Org Foundation"
    [ 17738.783] compiled for 1.15.0, module version = 2.99.911
    [ 17738.783] Module class: X.Org Video Driver
    [ 17738.783] ABI class: X.Org Video Driver, version 15.0
    [ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    [ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    [ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    [ 17738.783] (++) using VT number 1
    [ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
    [ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 17738.783] (==) intel(0): RGB weight 888
    [ 17738.783] (==) intel(0): Default visual is TrueColor
    [ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
    [ 17738.783] (**) intel(0): Option "TearFree" "true"
    [ 17738.783] (**) intel(0): Framebuffer tiled
    [ 17738.784] (**) intel(0): Pixmaps tiled
    [ 17738.784] (**) intel(0): "Tear free" enabled
    [ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
    [ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
    [ 17738.784] (II) intel(0): Output DP1 has no monitor section
    [ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
    [ 17738.784] (II) intel(0): Output DP2 has no monitor section
    [ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
    [ 17738.784] (==) intel(0): DPI set to (96, 96)
    [ 17738.784] (II) Loading sub module "dri2"
    [ 17738.784] (II) LoadModule: "dri2"
    [ 17738.784] (II) Module "dri2" already built-in
    [ 17738.784] (==) Depth 24 pixmap format is 32 bpp
    [ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    [ 17738.784] (==) intel(0): Backing store enabled
    [ 17738.784] (==) intel(0): Silken mouse enabled
    [ 17738.784] (II) intel(0): HW Cursor enabled
    [ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 17738.784] (**) intel(0): DPMS enabled
    [ 17738.784] (II) intel(0): [DRI2] Setup complete
    [ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
    [ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
    [ 17738.784] (==) intel(0): hotplug detection: "enabled"
    [ 17738.784] (--) RandR disabled
    [ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
    [ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
    [ 17738.789] (II) AIGLX: Loaded and initialized i965
    [ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
    [ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
    [ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 17738.839] (II) LoadModule: "evdev"
    [ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
    [ 17738.840] compiled for 1.15.0, module version = 2.8.2
    [ 17738.840] Module class: X.Org XInput Driver
    [ 17738.840] ABI class: X.Org XInput driver, version 20.0
    [ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
    [ 17738.840] (**) Power Button: always reports core events
    [ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 17738.840] (--) evdev: Power Button: Found keys
    [ 17738.840] (II) evdev: Power Button: Configuring as keyboard
    [ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 17738.840] (**) Option "xkb_rules" "evdev"
    [ 17738.840] (**) Option "xkb_model" "pc104"
    [ 17738.840] (**) Option "xkb_layout" "se"
    [ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
    [ 17738.870] (**) Video Bus: always reports core events
    [ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 17738.871] (--) evdev: Video Bus: Found keys
    [ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
    [ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
    [ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 17738.871] (**) Option "xkb_rules" "evdev"
    [ 17738.871] (**) Option "xkb_model" "pc104"
    [ 17738.871] (**) Option "xkb_layout" "se"
    [ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
    [ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
    [ 17738.871] (**) Power Button: always reports core events
    [ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 17738.871] (--) evdev: Power Button: Found keys
    [ 17738.871] (II) evdev: Power Button: Configuring as keyboard
    [ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 17738.871] (**) Option "xkb_rules" "evdev"
    [ 17738.871] (**) Option "xkb_model" "pc104"
    [ 17738.871] (**) Option "xkb_layout" "se"
    [ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
    [ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
    [ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
    [ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
    [ 17738.872] (**) Option "xkb_rules" "evdev"
    [ 17738.872] (**) Option "xkb_model" "pc104"
    [ 17738.872] (**) Option "xkb_layout" "se"
    [ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
    [ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
    [ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
    [ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
    [ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
    [ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
    [ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
    [ 17738.872] (**) Option "xkb_rules" "evdev"
    [ 17738.872] (**) Option "xkb_model" "pc104"
    [ 17738.872] (**) Option "xkb_layout" "se"
    [ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
    [ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
    [ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
    [ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
    [ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
    [ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
    [ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
    [ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
    [ 17738.873] (II) No input driver specified, ignoring this device.
    [ 17738.873] (II) This device may have been added with another device file.
    [ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
    [ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
    [ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
    [ 17738.873] (**) A..... G3: always reports core events
    [ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
    [ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
    [ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
    [ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
    [ 17738.873] (--) evdev: A..... G3: Found relative axes
    [ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
    [ 17738.873] (II) evdev: A..... G3: Configuring as mouse
    [ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
    [ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
    [ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
    [ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
    [ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
    [ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
    [ 17738.873] (**) A..... G3: (accel) acceleration profile 0
    [ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
    [ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
    [ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
    [ 17738.874] (II) No input driver specified, ignoring this device.
    [ 17738.874] (II) This device may have been added with another device file.
    [ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
    [ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
    [ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
    [ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
    [ 17738.874] (**) A..... G3: always reports core events
    [ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
    [ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
    [ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
    [ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
    [ 17738.874] (--) evdev: A..... G3: Found relative axes
    [ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
    [ 17738.874] (--) evdev: A..... G3: Found absolute axes
    [ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
    [ 17738.874] (--) evdev: A..... G3: Found keys
    [ 17738.874] (II) evdev: A..... G3: Configuring as mouse
    [ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
    [ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
    [ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
    [ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
    [ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
    [ 17738.874] (**) Option "xkb_rules" "evdev"
    [ 17738.874] (**) Option "xkb_model" "pc104"
    [ 17738.874] (**) Option "xkb_layout" "se"
    [ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
    [ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
    [ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
    [ 17738.874] (**) A..... G3: (accel) acceleration profile 0
    [ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
    [ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
    [ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
    [ 17738.874] (II) No input driver specified, ignoring this device.
    [ 17738.874] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
    [ 17738.875] (II) No input driver specified, ignoring this device.
    [ 17738.875] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
    [ 17738.875] (II) No input driver specified, ignoring this device.
    [ 17738.875] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
    [ 17738.875] (II) No input driver specified, ignoring this device.
    [ 17738.875] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
    [ 17738.875] (II) No input driver specified, ignoring this device.
    [ 17738.875] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
    [ 17738.875] (II) No input driver specified, ignoring this device.
    [ 17738.875] (II) This device may have been added with another device file.
    [ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
    [ 17738.876] (II) No input driver specified, ignoring this device.
    [ 17738.876] (II) This device may have been added with another device file.
    [ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
    [ 17738.876] (II) No input driver specified, ignoring this device.
    [ 17738.876] (II) This device may have been added with another device file.
    [ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
    [ 17738.876] (II) No input driver specified, ignoring this device.
    [ 17738.876] (II) This device may have been added with another device file.
    [ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
    [ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
    [ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
    [ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
    [ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
    [ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
    [ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
    [ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    It would be nice to find out why the settings was being set to "0".
    Last edited by Sne (2014-04-29 20:40:50)

  • [SOLVED] External USB mouse doesn't work

    I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
    I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
    Last edited by avli (2011-07-14 16:53:15)

    Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
    Hope this information will be helpful for users who probably faced with the same problem. Thank you!

  • [SOLVED] openbox menu command doesn't work with &&

    I'm now using openbox-session only.
    I'd like to run a program after something was done correctly:
    zenity --question && killall openbox
    I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
    However, the previous command "zenity" is run only.
    In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
    <item label="Exit">
    <action name="Execute">
    <execute>
    zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
    </execute>
    </action>
    </item>
    Please, give me any idea. Thank you.
    Last edited by mairoo (2009-09-09 10:06:17)

    hbekel wrote:
    You'll need to use a shell explicitly:
    <execute>
    sh -c 'command1 && command2'
    </execute>
    I flagged "solved" thanks to your help. It works good. Thank you.

  • (SOLVED) Lock screen suddenly doesn't work as expected

    It doesn't matter which lock screen (PIN, swipe, etc.) I choose, after the first unlock (after a reboot or change of lock screen), the phone no longer locks. Using the power button to lock doesn't work and I have the phone set to lock right away on sleep. It was working fine a few hours ago and there wasn't anything new I did to the phone.
    Any ideas?
    Solved!
    Go to Solution.

    Hello, I feel pretty dumb. I must've hit the "Disable lock screen" option in the BatteryBot Pro app by accident...I forgot it even had that option.
    If anyone's curious how I solved this, I inspected system messages using OS Monitor while reproducing the problem (ie, flipping through lock screen options and turning off/on the screen) and kept seeing the app's name coming up as well as a few others. I'm not sure why it started disabling the lock screen today though; I'm pretty sure I didn't touch the app in the last couple days.
    Anyway, sorry for any inconvenience.

  • [solved] My Optical Drive doesn't work.

    Hello, first i should thank the community for the awesome job they've made on arch linux and everything around it.
    Secondly, i installed arch linux two days ago, it was my first attempt and it seems to work flawlessly with gnome, compiz, etc. i even managed to master pacman and yaourt.
    But i have a little issue my optical doesn't work in gnome, i can't even see it on the devices. (It worked great on the installation). Any ideas?
    Last edited by 1lj4z1 (2011-03-25 17:36:20)

    OK, so start with creating a mount point, like
    sudo mkdir -p /media/dvd
    -- and then feed your drive with a disk, and see what happens. (I suppose it will mount it automatically, but lets see...)
    Edit: Just in case your system needs a cdrom directory, you can create a symlink to your /media/dvd,  like this:
    sudo ln -s /media/dvd /media/cdrom
    Last edited by bohoomil (2011-03-25 14:27:53)

  • [Solved]Openbox: Autostart.sh doesn't work

    Hello
    I just made a fresh install of arch with openbox but I can't launch my applications at start
    xterm &
    nitrogen --restore &
    This doesn't work in ~/.config/openbox/autostart.sh neither in /etc/xdg/openbox/autostart.sh
    Can someone help me plz ?
    thanks and sorry for my bad english
    Last edited by Jeager (2010-05-16 20:48:43)

    Sorry I'm new with linux. Thanks you for your time
    Last edited by Jeager (2010-05-16 20:40:26)

  • [solved] remove grub timeout doesn't work

    i am trying to remove the grub timeout by editing /etc/default/grub and setting grub_timeout to 0, but it doesn't work, is there anything else i should change?
    p.s. should i run grub-mkconfig?
    Last edited by aldoiljazi (2013-09-18 07:35:11)

    okay i run 'sudo grub-mkconfig'
    this is my /etc/default/grub
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=0
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    and this is my /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6b44daaa-610c-4f23-a632-569d091e4d43
    else
    search --no-floppy --fs-uuid --set=root 6b44daaa-610c-4f23-a632-569d091e4d43
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-6b44daaa-610c-4f23-a632-569d091e4d43' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6b44daaa-610c-4f23-a632-569d091e4d43
    else
    search --no-floppy --fs-uuid --set=root 6b44daaa-610c-4f23-a632-569d091e4d43
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=UUID=6b44daaa-610c-4f23-a632-569d091e4d43 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    p.s. i didn't think you needed those, because i thought they had default values.
    edit: i guess i need 'grub-mkconfig -o /boot/grub/grub.cfg '
    Last edited by aldoiljazi (2013-09-18 07:31:39)

  • [SOLVED]kdeplasma-applets-menubar doesn't work.

    I've just installed the following applications:
        kdeplasma-applets-menubar,
        libdbusmenu,
        libdbusmenu-qt,
        appmenu-gtk,
        appmenu-qt.
    But kdeplasma-applets-menubar doesn't work on my KDE4.10. The menu still show in the window and the applet only has the onmipresent "File" menu.
    Last edited by mert (2013-06-22 14:22:20)

    Go to 'System Settings' -> 'Application Appearance' -> 'Style' -> 'Fine Tuning' and change 'Menubar style' to 'Only export'. Just checked, works fine with qt applications.
    I'm not sure about gtk apps, though. I recall reading somewhere that, in addition to installing appmenu-gtk and its dependencies, one needed to specify something in the .gtkrc and/or .config/gtk-3.0/settings.ini file(s). Well that or my memory might just be playing tricks on me.
    EDIT:
    If for some reason gtk apps refuse to export their menus, you might want to look at this webupd8 article. Good luck!
    Last edited by andy_v (2013-06-22 12:36:50)

  • [Solved] archiso UEFI boot doesn't work.

    I just followed the instruction on https://wiki.archlinux.org/index.php/UE … B_from_ISO, but it doesn't work as intended. It shows just 3 menu,
    Arch Linux archiso x86_64 UEFI USB
    UEFI Shell x86_64 v1
    UEFI Shell x86_64 v2
    I thought, the first option is the way to go, but
    Error loading \arch\boot\x86_64\vmlinuz: Not found
    In fact, there is no \arch directory. The iso file downloaded was not broken, so I think something's missing either in the article or in the iso file.
    edit : I found that, the name of 'arch' directory was changed to something like "?????????". I don't know why, but when I changed it to "arch" again, it works like a charm.
    Last edited by kreoso (2012-11-01 16:54:57)

    Exactly the same thing happened to me. I think there's some filename encoding issue because I wasn't able to rename ????????? to arch, instead I moved to arch2 then renamed arch2 to arch. Happy to say that worked for me too.
    I should add that the same USB stick worked first time with my laptop, it was only when trying to boot my desktop in the same way that I hit this issue, so it seems sensitive to BIOS manufacturer/version.
    Last edited by malcolmsparks (2012-11-04 19:46:32)

  • [Solved] ASUS F3Ka bluetooth doesn't work

    Hi everybody!
    Can anybody help me with getting bluetooth to work on ASUS F3Ka please?
    Here is the dmesg output:
    [n0ne@darkstar ~]$ dmesg | grep Blue
    Bluetooth: Core ver 2.11
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    I've got bluetooth daemon in my DAEMONS array in /etc/rc.conf
    BUT it still doesn't work:
    [n0ne@darkstar ~]$ sudo -s
    [root@darkstar ~]# hcitool inq
    Inquiring ...
    Inquiry failed.: No such device
    Any ideas, please?
    Last edited by alcazoid (2008-03-29 22:48:00)

    some stuff ive noticed with laptops and bluetooth...
    - bluetooth/wireless works in a lenovo i recently installed ubuntu in only after I suspend to ram. This is due to some weird Radio kill switch bug
    - sometimes leaving bluetooth and wireless turned  on on wiindows has its effects in linux, because windows drivers sometimes do not release control of the hardware. So try a cold boot, and if that doesn't work, a reboot from windows...'
    - try variants of leaving the bluetooth switch on/off during the boot process
    none of these actually seem like logical solutions, but thats how bluetooth/wireless and linux sometimes is..good luck!

  • Xorg layout still doesn't work (almost)[SOLVED]

    Hi,
    After struggling to enable keyboard layout after the latest upgrage, I managed to do
    the following:
    I enabled Hotplugging, and configured it to work.
    In the KDM login screen (prior to login), everything works fine: I got both layouts I want, and can toggle between them.
    But after KDE starts, I loose my ability to swith layouts using my configured toggle switch (its back to the
    old toggle switch - a different one, which simply changes the flag when I try to switch layouts, but the keyboard is not switched).
    I'd appreciate any suggestions.
    thanks
    fiod
    Last edited by fiod (2009-02-17 06:22:26)

    There is a bug actually in switching layouts:
    http://bugs.archlinux.org/task/13188

  • [Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100

    Hi people of the archlinux forum.
    Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
    I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
    This is my laptop after the suspend:
    I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
    this is my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "dbe"
    Load "dri2"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "CustomEDID" # [<str>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "ClockGating" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    #Option "DefaultTVDACAdj" # [<bool>]
    #Option "Int10" # [<bool>]
    #Option "EXAVSync" # [<bool>]
    #Option "ATOMTVOut" # [<bool>]
    #Option "R4xxATOM" # [<bool>]
    #Option "ForceLowPowerMode" # [<bool>]
    #Option "DynamicPM" # [<bool>]
    #Option "NewPLL" # [<bool>]
    #Option "ZaphodHeads" # <str>
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RS482 [Radeon Xpress 200M]"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
    Sorry for my english this isn't my native languaje... Thanks you for all
    Last edited by geonunez (2010-07-08 20:19:09)

    I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
    xorg.conf is not used. Turning KMS off doesn`t help.
    I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
    [Sydorenko@SLE ~]$ sudo s2ram -n
    Machine matched entry 17:
    sys_vendor = 'Acer *'
    sys_product = 'Aspire 5100 *'
    sys_version = ''
    bios_version = ''
    Fixes: 0x3 S3_BIOS S3_MODE
    This machine can be identified by:
    sys_vendor = "Acer "
    sys_product = "Aspire 5100 "
    sys_version = "V3.10A"
    bios_version = "V3.10A"
    See http://suspend.sf.net/s2ram-support.html for details.
    Last edited by SydMax (2010-06-06 16:53:50)

  • [solved] mmg from mkvtoolnix doesn't work

    Hi guys
    I just wanted to use mmg to make a mkv video file, but starting it from terminal, it only shows the following
    % locale
    LANG=de_DE.utf8
    LC_CTYPE="de_DE.utf8"
    LC_NUMERIC="de_DE.utf8"
    LC_TIME="de_DE.utf8"
    LC_COLLATE="de_DE.utf8"
    LC_MONETARY="de_DE.utf8"
    LC_MESSAGES="de_DE.utf8"
    LC_PAPER="de_DE.utf8"
    LC_NAME="de_DE.utf8"
    LC_ADDRESS="de_DE.utf8"
    LC_TELEPHONE="de_DE.utf8"
    LC_MEASUREMENT="de_DE.utf8"
    LC_IDENTIFICATION="de_DE.utf8"
    LC_ALL=
    % mmg
    Fehler: Die Sprachumgebung konnte nicht erfolgreich gesetzt werden. Bitte überprüfen Sie die Umgebungsvariablen LANG, LC_ALL und LC_MESSAGES.
    For the non german guys here:
    % locale
    LANG=C
    LC_CTYPE="C"
    LC_NUMERIC="C"
    LC_TIME="C"
    LC_COLLATE="C"
    LC_MONETARY="C"
    LC_MESSAGES="C"
    LC_PAPER="C"
    LC_NAME="C"
    LC_ADDRESS="C"
    LC_TELEPHONE="C"
    LC_MEASUREMENT="C"
    LC_IDENTIFICATION="C"
    LC_ALL=
    % mmg
    Error: The locale could not be set properly. Check the LANG, LC_ALL and LC_MESSAGES environment variables.
    Do you guys have the same error messages? I just want to be sure, that it's not my fault, before I post a bug report.
    Here I found, that this was already fixed at a much earlier version of mkvtoolnix, so I really have no idea, what's best to do. I recompiled it, didn't change a thing.
    Thanks for your help :-)
    Last edited by Army (2010-01-10 00:33:52)

    Ok, solved! I created a testuser and it worked for this user. So I removed all unneeded config files from my home directory and now it works again. Don't know what exactly caused this, but well, everything's fine again :-)

  • [solved] tmux rebinding prefix doesn't work?

    Hi everybody,
    I decided to try tmux out, so I installed it and played around with it abit ... okay, it's pretty neat, but I've got to bind the keys to the same way I bound them for screen or I will go insane, so copy and paste, from the man page:
    Commands to be run when the tmux server is started may be placed in the ~/.tmux.conf configuration file. Common examples include:
    Changing the default prefix key:
    set-option -g prefix C-a
    unbind-key C-b
    bind-key C-a send-prefix
    So I stick
    set-option -g prefix C-a
    unbind-key C-b
    bind-key C-a send-prefix
    in ~/.tmux, that unsets the "C-b" binding, (so I can't do anything), but it doesn't bind "C-a" successfully.  Has anybody here successfully rebound their prefix?
    Last edited by pseudonomous (2010-04-09 22:16:14)

    Hi, Jasonwryan.  Thanks for your response.
    It turns out the problem was tmux wasn't automatically reading ~/.tmux, if I pass
    tmux -f ~/.tmux
    then I can get your config to work, I'll be the example from the man page works too.
    Edit:
    To elaborate on this problem, the file is supposed to be called "tmux.conf", not tmux.  This is what I get for not reading carefully enough.
    Last edited by pseudonomous (2010-04-09 22:22:20)

Maybe you are looking for

  • Explorer.exe uses too much CPU cycles (roughly 50%)... How can I fix this?

    Hi everyone, In the last two days I have noticed a serious loss in system performance.  The first thing I do when I come accross a performance issue is to make sure that I don't have any scheduled automatic scans running in the background, such as my

  • PSE 9 only works with old AIR version on Win 7 x64. Adobe please help.

    I'm hoping that Adobe can jump in and help here as there are some real versioning issues with the components that PSE 9 uses.  I've made a number of posts in the Adobe AIR forum (while I was figuring this out) and have exchanged with Adobe resources

  • Invalid charater in Excel when input .txt file that run from Oracle discove

    Hi All, I ran a report from oracle discover and saved as txt file, then open it with excel, the chinese will be shown as invalid character. The problem is that Chinese characters can't be displayed well if I download the report (in csv ) from discove

  • How to spool DBMS_OUTPUT.PUT_LINE from SqlPlus?

    Hi, i have a stored procedure test: procedure test is begin dbms_output.put_line('Test'); dbms_output.put_line('Test2'); dbms_output.put_line('Test3'); dbms_output.put_line('Test4'); dbms_output.put_line('Test5'); end; I start the stored procedure ou

  • Black Bounding box?

    I just upgraded from CS3 to CS6. I hate this big black bounding box I am now working inside of. Makes it much harder to Command-zero an image up to full screen size, and Also I haven't been able to figure out how to bring 2 images up together, so I c