Some Calculations are not working in Discoverer 10g after upgrade from 4.1

Hi Gurus,
We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
Thanks & Regards

Not sure exactly what this might be... there could be an issue there.
Please make sure that you review the upgrade.log. Are there any errors / warnings?
Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
Later you may wanna open a Service Request into the Oracle Support.
I hope it helps...

Similar Messages

  • Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

    Hello all,
    this is just a hint in case anyone has the same problem with the UWL.
    It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
    The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
    You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
    Kind regards

    .. just a hint ..

  • Screens not working in ECC 6 after upgradation from 4.6c.

    The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
    jinesh kumar c.

    Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
    Because some times we get Dynpro errors for transportation of the screens.
    Reward if useful.

  • User Settings not working in Calendar Express after Upgrade from 6.2 to 6.3

    After Installing Patch 121657-19 the Calendar Express view seems to mix up
    the default preferences with the user selected preferences.
    For example let's say the user selects the green color scheme in the options panel,
    at the next login to Calendar Express the user gets for the default blue color scheme
    for the top frame, and the green colors for the middle frame.
    This seems to randomly change for each page and even between just reloading the
    page with the browser's reload button. It seems like each frame just randomly has
    either the default or the selected color scheme.
    This also seems to happens with the other User Preferences like "Default Initial View"
    or "Default Calendar Group".
    Any idea where to look to figure this out is greatly appreciated.

    mwohlf wrote:
    After Installing Patch 121657-19 the Calendar Express view seems to mix up
    the default preferences with the user selected preferences.I hit the same issue with a 6.2->6.3 upgraded system and a fresh 6.3 installation. A quick search didn't reveal any pre-existing bugs nor could I find any obvious problems delving into the xsl code -- please log a Sun support case to have this issue looked into further. Please note that in 6.3 calendar express is a deprecated interface so you should be making every effort to move to UWC/CE anyway.

  • Some Keys are not working on Lenovo G570

    Hello all
    I am new here, looking for some help regarding my Lenovo G570.
    Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
    Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
    Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
    Go to Solution.

    Hi Asadkhan92,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
    As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check  for the issue, this is to confirm if the issue with the hardware or software.
    If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.  
    Please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps! 
    Best regards,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Some keys are not working

    I have HP pavilion notebook PC with product number F6C53PA#ACJ serial number [Personal Information Removed] BIOS F.34-10/31/2013 keyboard revision 29.34.
    Some keys in my keyboard are not working properly. I couldn't type < and > in microsoft office, on the websites etc.

    Hi there
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that some keys are not working on your keyboard. I am happy to help with this. Are those keys working consistently in some applications? For now I would suggest you look at it as a cleaning issue. Perhaps some dust or debris is affecting the key presses.
    Notebook Keyboard Troubleshooting (Windows 8)
    Cleaning your Notebook PC
    Tips for Using, Carrying and Protecting your HP Notebook PC Let me know if that makes any difference.

  • Hp pavilion dv6 some keys are not working

    ,i bought my laptop 2 year earlier now some keys are not working such as less than ,greater than,question mark and all the right side keys of the keyboard 
    plz help i have to do lots of work in laptop 
    so i m very much tensed abt this plz help me as soon as possible

    Hello mahi_20. Welcome to the HP Forums. I understand certain keyboard keys are not working. The issue could be hardware or software related. Before anything else, I would attempt cleaning the keyboard. For more information on how to clean a notebook keyboard, please reference this guide: How to Clean a Laptop Keyboard
    If the issue is not resolved, after cleaning it, there is likely a software issue. To assist you thoroughly, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Locating the Model Number of the Computer
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Please respond as soon as possible. I look forward to your response.
    I worked on behalf of HP.

  • Hp pavilion d4 : some keys are not working

     some keys  are not working  as i used it after 4 months gap. do it need hardware replacement or it is due to moisture?

    While this could be a hardware issue, it's always worth trying the following.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
    That sounds like the probable cause you cannot add contacts.
    Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps).  Also contacts sync has nothing to do with iCloud behavior.  The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere.  Specific syncs are not relevant.

  • Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

    outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
    It always says call back ...
    incoming is working
    i tried number of sim cards from different networks but same issue
    tries resetting network settings but it also didnt worked

    Just counter-check the following settings.
    1. Settings>General>Set Side Swith To: Rotation Lock
    2. Make sure side switch is not in lock position
    3. If necessary do a reset a few more times

  • Formula Columns are not working in Reports 10g

    We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
    Please, someone help us in this regard.
    Thanks & Rgds,
    M T

    What version of Reports do you use..???

  • Some keys are not working of my laptop lz801pa#

    Recently I installed Windows 8.1 on my laptop (hp pavilion dv6 6115tx entertainment notebook) - lz801pa
    Then I installed Visual studio 2013. everything was working perfectly then.
    I guess when I changed keyboard option in visual studio to C# 2005, after that some of the keys stopped working.
    I also reset that option to default, but the issue is still there. 
    Down & right arrow keys, right arrow key of num pad, 1-5,8,9,0 keys in the first row(up above qwerty keys row) are not working. 
    I am able to press indivisually tab & alt, but alt+tab combination is not able to use for switching between windows/apps.
    Please help me.

    Hello Rdmusale,
    I understand that some of the keys are not working on your notebook computer, and I would be happy to assist you in this matter!
    To correct the output of characters from your keyboard, I recommend following this document on Notebook Keyboard Troubleshooting (Windows 8). This should help correct how the keys appear on your keyboard.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • In the keybourd of my mac 10.8.3 OSX, some battons are not working

    n the keybourd of my mac 10.8.3 OSX, some battons are not working

    Thank you sig , you helped me two weeks ago , now let help JCT FELIX, i went to Ebay and got a new key pad
    for $29.99 , then took it to Best Buy , they will change the key pad for $49.99 , and you will be home free , don't
    try to change it your self ,you have to gut the whole laptop of everything to get to the key board , it is very very
    hard if you don't know what to do , hope this can help you , i got my laptop working like new .
    Good luck

  • Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

    Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
    Any advice

    You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:

  • My lenovo ideapad G570 some keys are not working

    Dear Friends,
    Am using Lenovo ideapad G570
    from last 2months in my laptop some keys not working  (N,B,Left,Right,Up Arrow and Space bar)
    Kindly Suggest me For resolving the issue.

    hi vickydy,
    Welcome to Lenovo Community Forums!
        First make sure this is a hardware concern.
    Run an Onscreen Keyboard, by Pressing (Windows key + R) then type in OSK then hit enter
       Now on your onscreen Keyboard click on the keys that are not working see if they responding with the Onscreen keyboard.
         If the keys responded using the Onscreen Keyboard, Then your Keyboard hardware is bad.
    Either you call Technical Support to have them repair the unit in / out of warranty repair OR Ask them where to get the part for it and have the keyboard replaced.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Problem in Purchase Order Printing in the TCODE ME9F

    Dear Experts, I am workning in the Upgrade Project from SAP 4.6C to ECC6.0. When i change the Line items of the Purchase order in SAP 4.6C and take the print out in ME9F it shows all the Changed line items and Unchanged line items.But in ECC 6.0 if i

  • Weird OT font behaviour in InDesign and Illustrator

    Hi font experts. I've been directed here by someone at the InDesign forum, who thought you might be able to help. Can anyone explain what's happening here? I've loaded an OT version of Zapf Dingbats into Suitcase Fusion on my Mac Pro and it seems jus

  • AE CC doesn't import Mov Files.  Apple Prores / Animation Codec

    hallo, After Effects doesn't import my Prores / Animation Codec Files. at very first it did not work and the message appeared: "after effects error: file "" cannot be imported - this "moov" file is damaged or unsupported. " Then i restarted AE

  • Lost "Info" tab

    I no longer have the "info" tab at the top of the dialogue box in iTunes when I hook up my iPhone or iPad. Does anyone know what's up? OSX: 10.9.9 IOS: 7.0.6

  • Tools to design of Case Report Form

    Hello, I have two questions What tools do we use to design the CRF's . Is that Adobe Designer, Adobe Framemaker>? or what r the other ones When Oracle clinical can internally design a CRF ( summing up the DCM's and DCI's) why do we need to design usi