Some Examples of FICO tickets regarding Automatic Payment Run,GL,AR,AP,Bank

Hello,
Could anybody please provide me with 5 or 6 examples of FICO tickets that we normally get during real time and their solutions regarding APP,AP,AR,GL,Bank and Cash
I need it badly so kindly send me those tickets and the solutions if u can to my Gmail Account
[email protected]

Dear Friend,
Each and every thread you can treat as a ticket.
Regards
Sree

Similar Messages

Automatic Payment run without Bank Ranking order

Dear Experts,
I want to excute the Automatic Payment run without assigning the Bank ranking order in OBVCU, means that when I run the APP it should pay from the House Bank entered in the Vendor master data under the Automatic payment transactions. In my case House Bank is the Bank Account.
Details of the data in Vendor master are;
Payment methods: C
House Bank: Given
Details of BVCU are;
Ranking Order: Not entered
Bank Accounts: Entered
Available Amounts: Entered
When I execute the APP, it puts the payment in exception list in the proposal.
Any help will be much appreciated, thanks.

Hi
As per my understaning there will be no impact . Vendor Master data always have priority.
so maintain ranking order and vendor master also woth aprropriate House Bank and Account ID
Thanks
Manoj J

Integration between SAP HR and FICO module regarding advance payments

Hi friends,
Can anybody tell me that is there any type of integration possible in SAP HR and FICO module regarding advance payments?
I mean to say that, if any advance payment made in cash department through FICO module on behalf of any employee vender and the amount is recover from that employee salary ( in full or installment ) through HR module in time of salary process. Is it possible that the recovery will reflect in FICO module also.
Eg. : Suppose one employee has taken an advance of Rs. 10000 from Accounts & the amount is recovered from his salary by Hr as Rs. 5000 per month. After first month salary is it show as Rs. 5000 to be recovered from him in the FICO module.
Please let me inform that is it possible in SAP. If yes then how?
I shall wait for your warm response.
With regards,
Diptendu

Hi Sikindar,
Thanks for your reply, it's really helpful for me. But can you please tell me that, is there any way to automatized it.
I want to mean that, what ever fitment is made by the accounts in FICO it will reflect in payslip and related reports of HR module.
Eg. :-
If anyone take any advance from accounts, after make an entry in FICO, it will directly reflect in his payslip as a note and also display in the salary related report of HR.
In time of recovery, it will automatically deduct the amount from his salary and reflect in his payslip ( in the deduction part ) and reports as per mansion installment ( The no. and amount of installment should be maintain in FICO. )
With regards,
Diptendu

Give some examples of sd tickets

give some examples of sd tickets, how these are solved?????/

Check these few ones
1. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
Solution:
Option 1 (Standard solution):
step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
step 2: Maintain Customer master / Material Master correctly.
step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
Option 2:
Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
2. Account Key not maintained in Pricing Procedure:
Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
3. Billing Document not being released to accounting --
In Material Master, there is some link between Profit Centre & MRP Type. If one of it is not maintained, erratically few documents get stuck while releasing Billing Document to accounting. Few of course get posted.
Solution1: Cancel Billing Document --> Reverse PGI --> Cancel Delivery --> Block the sales Order & Create new sales Cycle all over again after rectifying Material master.
Solution 2: (Temporary Solution) In Debug mode in Billing, force the Profit Center in Billing Document with the help of Abaper. But ensure Material master is rectified.
From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client to upload through LSMW / SCATT / BDC.
In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
1. G/L account not found
2. Cost Element not maintained for G/L account.
In both the above cases, FI consultant requires to take corrective action.

Automatic payment run

Hi
One of the User run the F110 on some date and gave vendor numbers from 1 to 99999 with AP wire payment. Finally it showed 11 posting orders generated and completed. When I see the FBL1N for the vendor # 10346, it is showing under open only not cleared.
Could you please advise me what should I do for this.
Regards
Murali

Here are a couple of things that you can check.
1. Go to FBZP and check if the payment method is in the country of the company code in which you are running the automatic payment run (also check in 'payment methods in country' if you have anything in allowed currencies. If you have none, all currencies would work. If you have specified any, it will work only for that currency).
2. FBZP - Payment methods in company code - Check if the payment method is assigned to the company code and in the same option (payment methods per country) check if foreign business partner allowed checkbox is checked in case your vendor's country is other than the country of your company code.
3. FBZP - Bank determination - Check if the payment method is having (a) ranking order and CoCd, (b) housebank/payment method (here again the same rule above applies to currency) is assigned to bank account ID and GL account, and (c) available amounts. Value Date and Expenses/Charges are not important.
Good luck!
Assign points if it helps!!!

Error in printing sum value of DME file in Automatic Payment Run

Hi All,
We are in the process of upgrading from R/3-4.0B to ECC6.0.
In Automatic Payment run in transaction F110, when the spool is generated, the sum values is displaying in correctly. It is displaying and printing as actual value/100 for example if total of all the line items is 1000000, the sum value displaying as 10000 and in words also prints as ten thousands.
Kindly let us know how to fix the issue, if any one has come across with similar issue.
Thanx & Regards
Ashok

Hi VVR,
I got the following errors:
Err     Message text
003    Item is blocked for payemnt
007    Error in creating the payment doc, read job log.....
But if we have a look at the job log it is showing for all the 50,000 items... how to find where the problem is???
thanks.

Payment File for each Payment method in Automatic payment run

Hi Guru,
For each payment method in automatic payment run, eg, ACH(Auto Clearing House), Bank Draft. etc. what kind of payment outbound file I need to take note to configure it, please advice me. Thanks.
Regards,
Kick

Hi
Please check the documentation in the link below. You will be able to get some help from them.
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9c24d455711d182b40000e829fbfe/frameset.htm
Please let me know if it is useful. Also do award points if found useful.
Karthik

Automatic Payment Run - Alternate Bank Account in Vendor Master

Dear Forum,
We have a situation where the users want the alternate bank accounts to be maintained in the Vendor Masters and also to select this alternate bank account while doing the automatic payment run thru F110. While we can maintain more than one bank account in the Vendor Master, but how to select the alternate one during payment run. Your help would be highly appreciated.
Regards

Hi...
As per your issue while runing APP in F110 once complete parameters
And go to Edit praposal and double click vendor and double click on line items than it will displays the one more screen there select Reallocate button there you can enter your respective bank details.
Otherwise there is a Business Transaction Event 1810. You can see the code, looks like you need to replicate the vendor bank details with link to a company code.
Note:
Assign Multiple Bank Accounts in the Vendor Master
Your SAP system provides the functionality to store and use
information from multiple vendor bank accounts in the Payment
transactions screen of the vendor master general data via
transaction FK03 (Figure 1). Figure 1 reflects the bank type
determination logic I used in the vendor master, using the
three-digit International Organization for Standardization (ISO)
currency code as the Bank type.
Figure 1 Bank details vendor master
You can use the BnkT (bank type) field in the vendor master to
enter text differentiators for identifying the vendoru2019s bank
accounts. If you leave the bank type field blank against a bank
account in the vendor master, then it serves as the default bank
if the bank type information is missing in the vendor invoice.
You may want to leave this field blank if the vendor has only
one bank account and you want the system to select that bank
account for all payments.
If the bank type is blank for multiple bank accounts, then the
system looks for the first bank account with the blank bank type
in the vendor master to use as the default. You are not required
to define the text values u2014 in my example, INR, SGD, and USD u2014
elsewhere in your SAP system. The field allows any value up to a
length of four characters. Iu2019ll demonstrate the use of bank type
with vendor invoice later on.
The system performs a check at the time of invoice creation on
the bank type value used in the vendor invoice against the bank
type values used in the vendor master. If you have not defined
the bank type value in the vendor master prior to using it in
the vendor invoice, the system shows an error message. The
system performs the check to ensure that you are using a bank
type value in the vendor invoice against which it can find a
bank account in the vendor master. Otherwise, the system cannot
determine a bank account for making payments to the vendor.
Prerequisites for Vendor Bank Selection
You need to take care of a few configuration prerequisites before
you can use vendor bank selection in the automated payment
functionality.
1. Check the Bank details check box in the payment method as
defined at the country level in transaction FBZP. This ensures
the selection of the bank details from the vendor master at the
time of the automatic payment run. If you donu2019t do this, the
system does not copy the bank details into the payment IDoc that
it creates as a result of the automated payment run (transaction
F110).
2. Make the Bank Business Partners field optional in the field
status group attached to the vendoru2019s reconciliation G/L account
by selecting the button under Opt. Entry for this field. This
field maps to the Part.bank type (partner bank type) field in
the vendor invoice. If the Bank Business Partners field is not
optional and is in a suppressed state, then you cannot input the
partner bank type field in the vendor invoice.
I hope it will helps you....
Regards
vamsi

Block of payment in automatic payment run

Dear friends,
Can anyone help me in blocking an open line item in automatic payment run which is not already blocked but it is due for payment and i donot want to make its payment in the proposal.
Also if i want to do partial payment out of the open line item proposed in the automatic payment run, how do i do it?
Please help.
Regards
Dhirav Shah

It is possible to add and delete payment blocks on individual items
if they are included in the payment proposal. When you have run
the proposal there should be a button 'Edit Proposal' and there should
be an option for payment block. You can then enter a payment block,
and when you save this the item should then appear in the payment
proposal. It is not possible to block an entire vendor account, you
can only block individual line items.
Also most important thing in case you cannot edit this field in payment proposal:
Check your customising in transaction OB27, For you to be able to change/edit "payment block" in a payment proposal, you have to set the flag 'Change in Pmnt Prop' in this transaction.
Once an item is included in the proposal, the only ways it can be blocked is by either editing the item WITHIN the proposal, or else by deleting the proposal, adding the payment block via FB02 and then rescheduling the proposal.
Exact Steps:
Press the 'Edit Proposal'
Click 'All accounting clerks' on the Accounting Clerk box (This might
not appear on your system)
Double click on a particular item which you want to change
Then you can add/remove the payment block .
Hope it helps
Rgds
Soumya

Automatic Payment Run Issue

Hi,
In my company I want to do the automatic payment run with the customer setoff & customer open items document currency is USD & vendor document currency is LKR .I want to do the payment run in LKR.(My company code currency is LKR) I have defined the payment method "C" in both the Master data ( Customer and Vendor). Now I am trying to run Automatic Payment Program. But system shows all Customer invoice in exception list and display the following given below message. Can I run the automatic payment program using difference currencies? Please advice me to resolve the above issue.
Further this process I am doing for LKR customer & vendors & its working fine without giving any issues.
Enter a payment method for incoming payments
Message no. FZ010
Diagnosis
The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
System Response
The payment method is rejected.
Procedure
Enter a payment method for incoming payments
Thanks
Chrishantha

Hi,
I have created incomming payment method under this company code & asing to the customer master records.
How can I select multiple payment method at the time of doing auto payment run
Further , I didn't do any changes in vendor master records since I have to do the outgoing payment also
Please advice
Regards
Chrishantha

Automatic payment run - F110 for range of periods

Dear Friends,
In Automatic Payment Run - is it possible to run for the particular period or range of periods as i need to take 14 days data .
As i need to take only previous 14 days data only
Say for eg. I have customer who is having open item from Period 01-02-2011 to till date 27-03-2011.
eg : it should take the open item in between period of 13-03-2011 to 27-03-2011.
as this need to dymanic
Help me to solve this issue.
Kind Regards,
sarfraz

If you can't use the fields on the Parameter tab, then try the Free Selections tab. If that doesn't suffice, then use the BTE for payment blocking and item exclusion - Process 1820.

F110 - Automatic Payment Run - Checks Will Not Print!!

Hi!
My client executed transaction F110 - Automatic Payment Run for a range of vendors (100000 - 599999). He was able to execute the run but could not print checks and found out that payments weren't assigned check numbers in the system. However, payments were cleared off the vendors account as if they had been paid.
Please help!!
Tks,
Deki

Hello
did you assign a variant in the prinout/data medium tab?
you need to assing the proper house bank, account id and check lot in this variant.
If this is correct then you should get the check number assigned to the payment
document #.
Points will be appreciated
Regards,
Zaid Azam

Automatic Payment Run (F110) posting key setting

HI,
I would appreciate very much if someone could advice me about the posting key setting for Automatic Payment Run (F110). Where is the config done?

Hi Vani,
I am of the view that the solution to this issue would be :-
Moving to transaction FBKP.
Posting Key Allocating/checking.
Defination of each posting key and it field status
PL ASSIGN POINTS, IF USEFUL
Regards
Vivek Sahni

Automatic payment run through F110

Hi Everyone,
During the aotumatic payment run via F110, after creating the proposals when i am trying to display the proposal, it is giving an error message that " Company Code XY12 / XY12 does not appearin proposal 08.07.2011 AB00; correct "
But I already set company code XY12 , in the company code in the parameter tab. I ahve also set there payment methods and next payment date. Please help.

Hi
After you get the mesage
Carried out Automatic Payment Run through F110
Posting orders: 2 generated, 0 completed
You need to refersh data by pressing Status or Pressing Enter.
Regards
Venkat

Automatic Payment Run-f110 Reg

Hi,
I am not FICO Guy.But,I need to run the Automatic payment Run -F110.
Can you please explain step by step procedure how to run the F110.
Thanks in advance.

Select run date and enter and identification
Enter your parameters, company code payment methods, next pmt date, select the vendors and/or customers
On the free selection screen you can select values which can be included or excluded
On the additional log screen select the type of logging that you require along with the vendors and customers
On the printout data medium screen youcan select a variant to use when running the program
Save the parameters
Schedule the proposal and run it
After proposal has been created verify it is correct
Schedule the payment run, run it and note posting orders carried out
You can use SP01 to faciliate the printing of checks
Then you can create a payment file - FCHX
Print a list of checks from the check register FCHN
The following link may also assist you...
http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9c079455711d182b40000e829fbfe/frameset.htm

Some Examples of FICO tickets regarding Automatic Payment Run,GL,AR,AP,Bank

Similar Messages

Maybe you are looking for