Some font in gnome not working[Solved]

Hello,
I have archlinux up and running in various desktops, laptops and even two workstations.
Each one of them with different hardware and software issues. But one of the users just complained about having problems starting Mathematica. At first I though it was some fonts issues, but then the users showed me some others problems.
Please take a look at the screenshots and please trow me a bone here, I just ran out of ideas.
http://piko.110mb.com/pics/emacs.png
http://piko.110mb.com/pics/soffice.png
http://piko.110mb.com/pics/mathematica.png
LINKS DON'T WORK. PLEASE COPY AND PASTE THE URL
Any help will be very appreciated
Last edited by donpicoro (2010-02-15 12:28:22)

My shot in the dark: perhaps a weird default-font (or fontsize) set in .gtkrc-2.0 or in the theme itself? Something chinese...
Oh but mathematica.png doesn't look like font-issue at all. More like graphics-driver or composite-problem... Any luck without compositing?

Similar Messages

Some fonts in Safari not working

After updating to Safari 3.1, I noticed that some fonts in Safari now display as Helvetica fractions. However, when I use Firefox to view the same Web page, they display fine. I am using Suitcase Fusion 12.1.6 and manage Local Fonts. Some of the local fonts do not appear in the preview pane and say they are missing. I have located them and tried to add them (repaired first, all fonts do not need repair) but Suitcase will crash each time I locate the font.
Also, I noticed in Firefox that it is using the same fonts for the default set as Safari. Times & Courier. Yet these fonts aren't missing in Suitcase, so I am not sure what is happening here.

I am using Suitcase Fusion 12.1.6
12.1.7 is the current version. You should probably update.
but Suitcase will crash each time I locate the font.
Either the font is bad, or Suitcase's database is bad. That it tells you local fonts are missing points more towards a problem with Suitcase.
To reset Suitcase, close the application. It will give you a minor warning about available fonts. Click Quit. If you are NOT using Suitcase's vault, in your user account, go to ~/Library/Application Support/Extensis/Suitcase/ and delete the file:
Suitcase Font Database.suitcasevault
In the Preferences folder of your user account, delete the file:
com.extensis.SuitcaseFusion.plist
Relaunch Suitcase. You will need to reset any preferences in the program that you have changed from the defaults. You will also lose any sets you've created.
If you ARE using the vault, following the above steps will cause you to lose all fonts you've added to the vault. If you have backups of all of your fonts, this is no big deal. Otherwise, be forewarned that they will be gone. What you can do is move the database file to the desktop. Then if the problem with Suitcase continues, you've likely eliminated its database as the problem. Then you can quit the app again and move your original database back into the ~/Library/Application Support/Extensis/Suitcase/ folder.
please tell me if I nuke my font caches, how will it affect Suitcase Fusion.
It won't do anything to Suitcase. It doesn't even create them. For the most part, OS X builds your font cache files. If you remove them, the OS will rebuild them when you restart.

I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

For some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

Hello Redpanda68,
The following article provides information and troubleshooting steps that can help get Messages and Mail working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen

For some reason this is not working

I am a fairly new (but not completely inexperienced) flash
user, and I am trying to do something which I thought would be
relatively simple but has turned in to a huge production. Basically
all I want is some animated text that is also a button that goes to
the next scene. The text just sits there on the stage, cycling
through different colors, and then when you click on it, it goes to
the next scene. I was really sure I knew how to do this but for
SOME reason it is not working. I have provided a link to my .fla
file for reference. What am I doing wrong?
.fla
file here

You're not likely to get anyone to download your movie - but
to make text a
button the best bet is to turn it into a movie clip. Then you
just give it
an onRelease:
myText.onRelease = function(){
gotoAndPlay("myScene");
Also it's advised to not use scenes.
Dave -
www.offroadfire.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Gnome-online-accounts in gnome 3.2 not working[SOLVED]

gnome-online-accounts in gnome 3.2 is not working.it gives a bad token request.are other arch users experiencing this problem.
Last edited by PranavG (2011-10-02 15:52:33)

There are issues with the proxy settings, and I had weird situations depending the network I was connecting...
When I use my wireless network I can use the online accounts correctly.
When I use a foreign wireless, mostly sure I can't.
And when I set a local proxy (e.g. pivoroxy) for https protocol, I get this error while adding the account:
http://www.mail-archive.com/desktop-pac … 25738.html
That could be solved just by issuing:
$ export https_proxy=
$ gnome-control-center
Hope this could be useful for you,
Regards,
EDIT: for some reason I wrote "I get this error will adding the account" instead of "I get this error *while* adding the account".
Last edited by lapacho (2011-10-10 20:58:32)

After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

Hi,
I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
I have no clue whats going on here because email and web is working fine.
In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
Is there anyone who could help me out here?
Thanks,
Daniel

Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

Suspend2ram via pm-utils in gnome not working

Hello Everyone,
I am new to Arch, and all signs indicate that it is finally my long-after-searched distro. Specifically, I switched from a very short dip into gentoo (gnome compilation...) and now really like arch docs and experience so far.
I managed easily to get through installation, helped by the excellent docs. After getting gnome to work, I now want to enable suspend to ram and suspend to disk. Suspend to ram (from gnome power applet) does not work, it blanks my screen, computer still runs normally and I can not get gnome back. Always need to do a hard reset.
I installed pm-utils, acpi, gnome-extra etc. as pointed out on the pm-utils and gnome wiki.
I understood that gnome uses hal for suspend by default, so this is a starting point I guess. The output of suspend in /var/log/pm-suspend.log is not helpful, since all hooks are run and it reads "performing suspend"
Thu Jan 27 21:34:52 CET 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux anvil 2.6.36-ARCH #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011 i686 AMD Athlon(tm) AuthenticAMD GNU/Linux
Module Size Used by
ipv6 244945 10
ext2 55656 1
snd_seq_dummy 1079 0
usbhid 32169 0
hid 60432 1 usbhid
radeon 814837 2
snd_seq_oss 25040 0
snd_seq_midi_event 4528 1 snd_seq_oss
snd_intel8x0 22230 0
snd_seq 41688 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_wavefront 28237 0
ttm 43438 1 radeon
snd_cs4236 21996 0
snd_ac97_codec 87943 1 snd_intel8x0
drm_kms_helper 23055 1 radeon
snd_wss_lib 17822 2 snd_wavefront,snd_cs4236
snd_pcm_oss 33694 0
snd_opl3_lib 7266 2 snd_wavefront,snd_cs4236
drm 142807 4 radeon,ttm,drm_kms_helper
snd_hwdep 4764 2 snd_wavefront,snd_opl3_lib
snd_mixer_oss 14654 1 snd_pcm_oss
ac97_bus 762 1 snd_ac97_codec
analog 7715 0
lp 6652 0
snd_mpu401 3800 0
snd_mpu401_uart 4927 3 snd_wavefront,snd_cs4236,snd_mpu401
snd_pcm 59136 5 snd_intel8x0,snd_cs4236,snd_ac97_codec,snd_wss_lib,snd_pcm_oss
i2c_algo_bit 4183 1 radeon
snd_rawmidi 15288 2 snd_wavefront,snd_mpu401_uart
ohci_hcd 19051 0
usblp 9636 0
ppdev 4862 0
snd_timer 15583 4 snd_seq,snd_wss_lib,snd_opl3_lib,snd_pcm
parport_pc 27832 1
ehci_hcd 32908 0
snd_seq_device 4369 5 snd_seq_dummy,snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi
i2c_nforce2 4408 0
ns558 2007 0
usbcore 115866 5 usbhid,ohci_hcd,usblp,ehci_hcd
snd 43219 17 snd_seq_oss,snd_intel8x0,snd_seq,snd_wavefront,snd_cs4236,snd_ac97_codec,snd_wss_lib,snd_pcm_oss,snd_opl3_lib,snd_hwdep,snd_mixer_oss,snd_mpu401,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
gameport 6917 3 analog,ns558
parport 25499 3 lp,ppdev,parport_pc
nvidia_agp 4112 1
i2c_core 15762 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2
tpm_tis 6132 0
fuse 56816 3
processor 22776 0
sg 21028 0
button 3746 0
shpchp 23037 0
forcedeth 47178 0
soundcore 4929 1 snd
tpm 9505 1 tpm_tis
evdev 6692 7
thermal 9690 0
agpgart 22816 3 ttm,drm,nvidia_agp
pci_hotplug 21523 1 shpchp
snd_page_alloc 5981 3 snd_intel8x0,snd_wss_lib,snd_pcm
pcspkr 1359 0
tpm_bios 4661 1 tpm
ext4 288261 2
mbcache 4298 2 ext2,ext4
jbd2 58404 1 ext4
crc16 1053 1 ext4
sd_mod 24384 5
sr_mod 13217 0
cdrom 31378 1 sr_mod
pata_acpi 2308 0
pata_amd 7988 4
libata 140436 2 pata_acpi,pata_amd
scsi_mod 106955 4 sg,sd_mod,sr_mod,libata
floppy 48264 0
total used free shared buffers cached
Mem: 769776 247124 522652 0 27036 92212
-/+ buffers/cache: 127876 641900
Swap: 1052252 0 1052252
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Jan 27 21:34:52 CET 2011: performing suspend
Any ideas or hints on this?
Thanks in advance
edit: After some time trying to get it to run with UPower, HAL and User Permission Method, I will end my attempts before I get mad. Fortunately, this machine was set up just to play with arch, and that was really fun. The stinging itch remains: If I could just pin down the error with debugging...
Last edited by phaebz (2011-01-27 21:48:33)

Thanks for your reply MadTux!
I have a radeon 7500 with RV200 QW VGA controller.
I use the open driver xf86-video-ati.
I tried both the proprietary and the open driver. To no avail.
One thing though: Through experimenting with both, pc now suspends (drives and cpu down). After resume, drives and cpu start up again, but screen remains black - no control.
I read on the wiki somewhere about vbetool - tried it also with that installed...
I am lost
edit: Will try with KMS disabled...
Last edited by phaebz (2011-01-29 14:02:46)

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Font Auto-Activation Not Working After First Use

Anyone else seeing this problem, or have a fix? Font auto-activation stops working after the first use. Here's what happens: Open a file that contains a font that is installed, but is disabled in Font Book. The dialog box "Application wants to use the font XXX". Click on Allow. The font will be available, as you expect. Now quit the application. Open the file again - you won't get the dialog box asking permission to use the font, and the font is not available. This happens in Pages 3.0.1 and TextEdit 1.5. It happens for each individual font - in other words, continuing my description, if you now open a second file that has another font that is disabled in Font Book, you'll be asked permission to use it. But once you've allowed a particular font to be used, you won't be asked permission again.

Make a backup. Restore the device as new. Test the issue again. If it persists, your device needs service. If the issue disappears, restore your backup. If it then reappears, then there is some form of corrupt data on the device from the backup. You'll have to restore that data one portion at a time to determine what is causing it, or set up the device as new.

Sonata font on MacOS - not working correctly

Hi,
I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
Thanks!

Hello RKmark,
Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
Back to your problem:
I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
Of course this does not help you. So let me just describe what I did:
I copied the OTF file, to ~/Library/Fonts
I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
In System Preferences, go to Keyboard and Input Sources.
Click the + button at the bottom left, scroll down the list and select “Others”.
In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
However, one thing I have observed:
If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
I hope this helps, let me know if you have any further questions.

HP 15-d041tu Notebook Some USB Stuff is not working?

I have bought this Notebook computer which is model HP 15-D041TU which has a Celeron N2810 / 2GB / 500GB HDD and having trouble with it ever since i bought it. First there were issues with finding correct drivers for the sytem which took me nearly 3 days to solve. The drivers that was provided in the website didn't work with the system plus automatic drivers detection software does not detect the system. Now i got everything installed and running perfectly well with windows 7 64BIT Version. Another problem arises,
My iPhone doesn't work, it tries to connects but breaks in the middle with blimb blimb sound coming repetitiously until USB Device gives a error
Next problem is i use to have Virus mouse ( Some cheap chinese bran Je-Way or something ). It works perfectly with all computers except for this one, driver doesn't install on this.
What's happening with this computer? is there something i don't know about USB 3.0 and windows 7? some old devices doesn't work? my iPhone works perfectly with all other computers with same cable and same itunes and same windows 7 64.

Hello nofacemonster, welcome to the HP Forums.
I see that you're having an issue with a mouse and iPhone connect them to the usb 3.0 port on your notebook. I will try to help you with this.
The first thing I'd like to provide you is this document: Troubleshooting USB Connections (Windows 8).
The issue you may be having, is with backwards compatibility. The document may be able to help you with that. Some older device just may not work with usb 3.0 though. It does depend on the device.
In regards to the iPhone, this post on the Apple Forums should answer your questions: Re: Simple. Does the iPhone 5s have usb 3?
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Some font families don't work anymore with Firefox 4 - why?

Since upgrading to Firefox 4 some font families (like for example "Script") don't work anymore though they were working with Firefox 3.6. How can one solve this?

You can see it for example here in [http://en.wikipedia.org/wiki/Font_family_%28HTML%29 Wikipedia] where (at least on my screen) most font-families look the same now. I have also attached a screenshot of the table in the article so you can see.
I don't actually know which font I have installed as I didn't install any in addition. It was propably some system font (is suppose Lucida Handwritig oder Lucida Calligraphy from the looking).
If there are any special installments required please tell me because I have absolutely no idea about such things.

Some font in gnome not working[Solved]

Similar Messages

Maybe you are looking for