Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjanc

Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent

Similar Messages

I need some help with Migration Assistant for transferring data

I would like to transfer selected items from my iMac (G4) to a new MacBook Pro using Migration Assistant, Can I selectively choose things to transfer? And are there any problems going from a G4 to an Intel-based machine? I'm mostly interested in transferring iPhoto photos and music from iTunes.

Migrating data other than your home folder may replace Intel components with PowerPC ones on the MacBook Pro, which will cause slow performance. Dragging over applications manually by restarting the old Mac with the T key held down and then placing them in the new Mac's Applications folder will work with many applications, but not all; any applications for which this doesn't work will need to be reinstalled.
(21366)

Help with migrating user data from one account to another

I am on a G5 with 10.4.11. I installed FCP studio 6 and everything works fine except compressor. I have had only one user account on this mac (i will call it account 1). I was told to create another account (account 2), log on and see if compressor works. It does. Basically there are files missing on account 1 and compressor won't run. I have installed 3 times and no change.
Anyway I was told to migrate all my user data from account 1 to account 2. I have been looking at threads and want to make sure I am doing the right thing. I found a way to close. Please see if this works. IT may be from the tiger forum:
pick a short user name for your new account. then run the following terminal commands
sudo mkdir /users/newshortname
sudo ditto ~ /users/newshortname
You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes.
Anyway, I would like to migrate everything from account 1 to 2 and have all preferences...everything. I would also like to be able to delete the old account...account 1 and rename account 2. Since this is a home MAC, I really don't need it PW protected. I would like this MAC to just use my new account 2 at start up.
Please ask me any questions. This is my editing MAC, and I can't get around inside the OS. I know FCP like the back of my hand, but don't want to screw up this computer.
Thanks in advance.
Message was edited by: Nelson May

Yeah, you should be able to move most of it by changing permissions.
Network settings could be any/all of these though for instance...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/com.apple.networkConfig.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist
/Library/Preferences/com.apple.print.FaxPrefs.plist
As well as the old Keychain & cookies from your Browser.

Help with Gmail IMAP in Mac Mall: Folders transfered from Exchange server

I'm in the process of migrating a mail account from an Exchange server over to Goggle Apps. I've transfered all old mail and the existing Exchange folder structure over to Gmail. Gmail doesn't recognize folders but instead reads the folder structure as Labels. When the account is subsequently imported into Mac Mail it appears that the orgiginal Exhange folder structure holds on the other side, which was my intent. These folders appear in Mail within the Mailboxes>Inbox.
However, there doesn't seem to be a way to insert a new folder into the Gmail IMAP account within the Inbox folder structure. I have successfully created a new "Mailbox" in Mail, but this appears to get inserted into the local version of the Gmail account much lower on the left hand side bar. It seems that I can pick up the "Mailbox" once it is created and move it up into the intended location, but only as a sub-folder. I am not able to promote it to the desired heirarchy or intended location.
Does anyone have any history with this or possibly a fix or suggestion?
Thanks!

My recollection is that unless you are a paid Hotmail account member, you cannot use Mail. Do a search within the discussion group, as I am not an expert, but I recall not getting Hotmail for that very reason.
Perhaps give gmail a try.....
That said....I still need some help with my posting! So please and thank you.

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Similar Messages

Maybe you are looking for