Some icon in my macbook not shown

Hello all.
I'm a newbie user for this Macbook Air 11".
I have a problem, i bought this macbook three days ago, and this afternoon when i turned my macbook into sleep mode for two hours, my mac didn't show  some icons like this
please help me to fix this.. ASAP
thanks:)

Boot in safe mode. This will cause certain caches maintained by the system to be rebuilt.
Safe mode is much slower to boot than normal.
When the login screen appears, reboot as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

Similar Messages

  • Close, new, back, forward icons are not shown

    Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
    Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Some of Photo (JPEG)-compressed images by Flash Pro are not shown in AIR app (3.7/3.8)

    Does anyone see this issue happening? In Flash Pro it's OK, but in AIR, it's broken.
    https://bugbase.adobe.com/index.cfm?event=bug&id=3558175
    Problem Description:
    Some JPEG-compressed images in swc produced by Flash Pro CS6 is not shown in AIR.
    Steps to Reproduce:
    1. Create a fla with Flash Pro CS6
    2. Put a png image in it and open the property of the image to make sure its compression option is Photo (JPEG)
    3. Produce an swc out of the fla
    4. Create an AIR app that shows the contents in the swc
    Actual Result:
    All images are shown
    Expected Result:
    Some of the images are not shown (nothing is shown where they are supposed to be)
    Any Workarounds:
    Use Lossless (PNG/GIF) for all images

    i was able to get it to work from a suggestion in another thread: if you write a JSFL that goes through all your bitmaps and makes sure they do not uset he default compression of the document, but instead use custom compression (it can match the default however). this worked for me

  • Navigation Attribut is not shown in two rows in the Query

    Hello,
    we are using a multiprovider with the infoobject 0material. In the multiprovider we use a navigation attribut MH_PR_ST of 0material.
    Normally, the query rows should show the material number and the corresponding attribut MH_PR_ST, but in some materials in the multiprovider exist some rows where the attribute is shown correctly from the master data table and in some rows the attribute is not shown.
    Therefore in the query two rows are shown:
    Material No. MH_PR_ST Key Figure
    4711           A                    10
    4711           #                       5
    Sum                                  15
    With all other navigation attributs there is only 1 row.
    Do you have any good ideas?
    Thank you very much + best regards,
    Ilona

    Hi,
    Assuming the second row comes from one of your basic cube; since it looks that 0MATERIAL is populated (it is coorectly identified), ensure that the identification of the nav 0MATERIAL__MH_PR_ST is done properly in your multiprovider.
    hope this helps...
    Olivier.

  • Checkbox not shown and also the styles

    Hi Gurus,
    I am using BI publisher standalone 10.1.3.4 and am able to see the checkboxes being generated from the template. However, they're of diamond shape and I would like to change that to a "tick" shape when checked and "not ticked" when not.
    How can I do that. I know that some fonts in wingding2 or wingding3 may do the trick.
    Also, in terms of numbering and paragraphing. Some of the symbols are not shown in the output. It shows some weird characters like "Y" instead of the arrowhead. How can I fix that?
    Rgds,
    Raymond

    Hi Raymond
    Both issues are related to the fact that the appropriate font is not available on the server. This is a requirement for PDF output, you should find that if you run your output to RTF and open it the check boxes and arrows are present. This is because the PDFs that BIP generates are completely self contained ie they do not reference any fonts on the client but rather have the glyphs embedded in the document.
    For the check boxes you need to get the Wingdings font up to the server and then change a couple of settings to specify the characters you want for checked and unchecked - check this blog article for more help - http://blogs.oracle.com/xmlpublisher/2007/05/wherere_my_checkboxes.html
    The paragraph arrows just need the font loaded to hte server. that is covered in the blog article but also in the main documentation too.
    regards
    Tim

  • [Solved] Some icons are not shown in certain websites.

    For example:
    trello.com
    gist.github.com
    is like this:
    many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
    It also happens to a gitlab server site I set up:
    How can I debug this? Does it happen at your place?
    EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
    Last edited by xgdgsc (2013-06-08 12:38:08)

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Some icons are not shown correctly in Gnome tray

    The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
    I noticed that Synergy icon behaves also wrongly.
    thanks
    Jan

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?

    Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?
    I already looked through this: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US
    However my itunes does not display the 'library' icon. Some help would be greately appreciated!
    Cheers!
    Andy

    Hello
    In itunes...preferences you can change the setting to import songs instead of mp4  to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it

  • Icon image is not shown properly in LInux

    Hi,
    I am creating a JDialog as follows:
    JDialog jd = new JDialog(frame, true);
    in the frame, I have set the icon using
    frame.setIconImage(image),
    but the image set to this is not shown properly in Linux, but it is shown clearly in windows,
    can anybody show some light here.
    thanx,
    Raj

    I would put my money on the fact that since your application is timing out, it is dropping any state that your View Objects otherwise had before the application timeout.
    So upon reauthorizing and reaccessing the application (and going directly to the detail page) the View Object is reinstantiated and only knows to go to its default data set which is 111.
    If my assumption is correct, I don't think you could really implement this without a lot of trouble.

  • For some reason, when my Macbook Pro starts up, all of the MS Office applications open.  This was not happening when I first purchased the laptop, and I never added these apps to the startup menu.  How do I remove these apps from startup?

    For some reason, when my Macbook Pro starts up now, all of the MS Office applications open.  This was not happening when I first purchased the laptop, and I never added these apps to the startup menu.  How do I remove these apps from startup?

    By default Mac apps do not close when you close the window you were working in. Unlike in Windows when you click the top right X icon in any program is closes the window and the program shuts down. On Mac OS X clicking the X in the top left hand corner only closes that windows and leave the program running in the background. If they are left open and you reboot they will restart with the system and load a window for them.

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • Some background jobs not shown in SM37

    Dear Friends,
    Some of my background jobs are not shown or visible in SM37. But, it is available in TBTCO, TBTCP & TBTCS tables. These jobs are scheduled in daily basis. These tables having records for all days of missed jobs.
    I dont know, why it is not comming in SM37. I tried in many search parameters in SM37 like prog. name, date and so on.
    These missed background jobs are not comes in spooler (SP01) also.
    Kindy, suggest me to find out the missed background jobs.
    Thanks in advance
    Regards,
    Rajagopal
    Chennai - INDIA.

    Hi rajagopalan,
    Normally this should not happen. Make sure the following in sm37:
    a. The start date is :  01.01.1800
    b. The end date is : 31.12.9999
    c. All the checkboxes (six checkboxes) are ticked.
    d. username = your username
    e. jobname = *
    SM37 gets records from the view V_OP (containing TBTCO and TBTCP)
    and filters for username using the field SDLUNAME.
    So you can basically cross-check if the count is atleast correct or the jobs were of different user (fieldname in the view/table) etc. (From SM37, you can export to excel and check the count)
    regards,
    amit m.

  • Sometimes, some images are not shown...

    Hi!
    Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

    I am having a similar problem so maybe someone can help me too.
    I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
    I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
    I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
            MediaTracker tracker = new MediaTracker(applet);
            for (int i = 0; i < img.length; i++) {
              img[i] = applet.getImage(urlCodeBase, imagePath + images);
    tracker.addImage(img[i], i);
    tracker.waitForID(i);
    if (tracker.isErrorAny()) {
    System.err.println("Error loading image " + images[i]);
    My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
    Any ideas would be a great help!

  • Some appointments are not shown sometimes

    I access a Webaccess server that is in GMT+1 timezone from GMT-5 timezone and have GW set to either GMT-5 explicitly or use workstation's timezone. I did this test on Sunday Feb 26 and couple hours into Monday Feb 27 (GMT-5) - I created an appointment for Feb 26, 11:00-11:59pm from within a week view. As soon as it was created, it was not shown either in week or day views or basic interface, but could only be seen in month view or when searching for appointments. That is just an example, it was not a single occurrence, but I had several test appointments like that. Then I also had appts that were not shown even in month view, but only in search results. Regarding that Feb 26 appt, it could be made seen again in day or week views if a different timezone was chosen in options. Today, Feb 27 at the end of the day, that appointment is seen no problem in day and week views and also in basic interface, so I do not have a reliable way of reproducing the problem. Since the appt was not shown even in basic interface before, I suspect it is a server time computation/database query problem and not browser graphics rendering problem. Also, there used to be a pdf file with Webaccess API that showed how to query calendar with startDate and endDate parameters which can be done in basic interface by manually editing the address field in browser and that part is broken too - Webaccess does not show some appointments after given start date, until the start date is moved up earlier to coincide with start of the day in GMT timezone. All that used to work fine in earlier GW versions. It looks like in GW2012 some big design changes were made and some serious bugs were introduced.

    The missing piece is how ( every other way of accessing the calendar ) sees the apointment. What happens from the Windows client? Does it show the missing appointment created in webaccess?
    Its certainly possible that some boundary condition bug is being exercised. But we need to get this to the point where it can be easily reproduced. I suspect the issue has to do with the time zone being signed differently, e.g. +1 vs -5.
    Webaccess is essentially a rewrite in 2012, this eliminated the GWINTER server component and so there are a lot of positives to this move. All things considered, its been pretty decent.
    -- Bob

Maybe you are looking for

  • PP CS4 crash - because of magic bullet stabilizer??

    I'm using PP CS4 and I have a wedding video that I've been working on and it all of the sudden crashed on me. I used time machine to pull up an older version which opened fine but I lost the hours of work I put in. So I tried again to open the file t

  • WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

    WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred

  • Prompting for Credentials

    Hi, I go to a webpage showing the performance of fund managers http://www.trustnet.com/Managers/AlphaManagers.aspx It does not require a username or password. When I try and link that data into Excel 2010 using Get External Data  - From Web, it asks

  • Little question: Word to InDesign transfer

    I am trying to help a teacher friend put together a book using Adobe InDesign, but I'm relatively new to this program. Does anyone know if there is a quick and easy way to transfer a Word Document into InDesign? I realize formatting might need to be

  • MIGO_GR Inbound Delivery

    Hi, I'm doing a goods receipt with reference to an Inbound Delivery via MIGO-GR. If I do this, it will not update the status of my IB, it wil still be A, open... How do I close/complete the status of my Inbound Delivery in this case?


HashFlare