Some links do not work in Micro soft explorer???

Hey there everyone! Does anybody know how to fix this? I just created my site using iweb.
I have it hosted on godaddy.com. It works great on safari, & firefox. However, some links do not seem to work for people using micro soft explorer. Anyway to fix this??? I welcome any advice. Thx!!
My site is: http://www.inspired2design.net/Welcome.html
Rgds_
larry

It's known problem:
[Explorer Links|http://discussions.apple.com/search.jspa?objID=f1193&search=Go&q=explorer +links]

Similar Messages

  • Some links are not working

    Could someone please look at the code on this page.  The Home link and the Prices link work in the table on the left but the other links in that table do not work.  I can't figure out what is wrong, perhaps another set of eyes can spot it.
    Any help would be appreciated.
    Thank you,
    Judy B

    Remove this from your code -
    <div id="Layer1" style="position:absolute; width:331px; height:270px; z-index:1; left: 383px; top: 204px;"></div>
    You don't need it, and it's masking those links that "don't work" so that the hover never kicks in.

  • Some links are not working when i click on them

    I will click on a link and it loads and then nothing. The only way I can open it is to open link in new tab. This has been happening since the new updates. Very frustrating as I have to resort to Google Chrome in order to not have to deal with this. Lots of links will not open.

    Nothing in header. Email from booking.com. Richard

  • Dynamic drill link is not working when i substitute some parameters in Plus

    Hi Gurus,
    Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
    Thanks & Regards
    Vikram

    Hi Vikram
    Oh gosh, me and my big mouth!
    Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
    Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
    Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
    All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
    Hope this helps
    Regards
    Michael

  • Some links don't work in Safari

    I ran a whole bunch of software updates a while ago (funny, after the entire process, nothing actually updated... I had to run it again later), and somehow, in the process, something went wrong with Safari. Now, some links don't work. It's mostly links in the content portions of webpages. For example, things like the Store/Mac/etc buttons at the top of the Apple site work fine, but things like links in forum signatures don't. I have to open them in a new tab. I tried updating Safari, but it didn't fix anything. I've tested Firefox and Camino and they work fine, but Safari is my browser of choice, so this is pretty irritating. Any ideas as to what's causing this and how to fix it?

    You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

  • After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

    I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Link is not working for one role. how to check please guide.

    Hi Expert,
    I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
    I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link  will not work as per the role maintianed.
    But where this link got maintained and how i will be able to check which link is tagged to which profile.
    rolewise mappeing with link.
    Please guide.
    Prem.

    Hello Prem,
    Please check the navigation bar profile from your business role.
    Then go to the navigation bar profile settings, you can find the details settings there.
    If it is a link under some work center, you need to start from the work center.
    If it is a direct link, then start from the derect link group.
    Hope this could be helpful.
    Best regards,
    'Maggie

  • In P6 P6 Help link is not working

    Hi,
    My P6 help link is not working in help menu.
    P6 Library and Support link are working.
    As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
    Can anybody help?

    Hi,
    We worked on this issue ,
    Solution:
    In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from  http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
    Then everything fine now,
    Regards
    Kumar

  • The figure links are not working

    The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.

    Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
    How I create navigation menus:
    http://jeffnitschke.com/Video.html

  • Links do not work RH5 to RH 8

    I upgraded a context sensitive, Oracle Help output, from RH5 to RH8.  Now several of the old topic ID links do not work. The links are not "broken" and some links within the same topic work and some do not. It gives the message that the address is invalid on the non-working links.  Also, the help system does not work when the "search" functionality is used.

    Dear jscher2000, thank you for your response! I'm running 16.01 version, so the 3.6.20 version isn't the correct one. I've updated it yesterday.
    I also have to mention that today everything seems to work just fine! :) I don't experience the problems anymore and all links work again just normally, eventhough I'm logged into Facebook account. Maybe it was just a temporary bug.
    I couldn't say what was the reason to that solution, but I'm glad there aren't problems anymore with Mozilla.
    Thank you again and best regards,
    Nina

  • Some Keys are not working on Lenovo G570

    Hello all
    I am new here, looking for some help regarding my Lenovo G570.
    Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
    Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
    Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
    Thanks  
    Solved!
    Go to Solution.

    Hi Asadkhan92,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
    As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check  for the issue, this is to confirm if the issue with the hardware or software.
    If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.  
    Please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps! 
    Best regards,
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

    Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
    Any advice

    pcmyhre,
    You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html
    External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Copy Protection without DLT - Link does not work

    I'm trying to find out how I can protect DVDS with Encore. Or if anyone knows of reasonably priced software to do this. I see there is a link to something called, Protection without DLT, but the link does not work....
    Help!
    Jessica

    CSS keys are only licensed to replicators, player manufacturers, etc. so it is highly unlikely that there will ever be a free solution for creating encrypted DVDs.
    CSS encryption is worthless, by the way.  It has been compromised for over a decade.  There are more complex copy-protection methods available that work by creating malformed structures on the DVD meant to confuse "ripping" programs.  However, they are an additional cost from third parties and, more significantly, they run the risk of making your product incompatible with older players or with some computer DVD-ROM drives or software players. 
    Your replication facility can tell you which additional copy-protection methods they offer and what their cost is.

  • XAV 601BT mirror link does not work at all ..app is crashing...its hopeless

    I am completely disappointed by this product of Sony. I had big regards for a brand like Sony and always believed that Sony delivers what they commit. But my heart broke when I installed this ****** stereo in my Honda car. The mirror link does not work on any compatible phone as they have shown in the box or website.<br>The App crashes system shows Device not detected. Tried many times.<br>So folks Dont buy this Mirrorlink ******....copy of this review is going to all major review sites..so people dont fall into this ditch.<br><br><br>

    I'm sorry to read about your disappointment with Sony Mikasony.
    I would just like to inform you that the available operations of  the MirrorLink function vary depending on the smartphone or the application being used. Therefore, some of the applications installed in the smartphone may not work when using the MirrorLink function. You can close the application and remove the USB connection between the smartphone and the car stereo then, reconnect again to resolve the issue. Here's the list of compatible devices.
    NOTE: For inquires about the application that is not working, contact the application vendor or the smartphone's manufacturer.
    Should you need further assistance, please reach out to Sony India Support here. Thank you!

  • Premiere Pro to Adobe Audition Dynamic link does not work. Cannot edit audio in Audition.

    Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
    -Windows 7
    -Premiere Pro CC 2014
    -Adobe Audition CC 2014

    You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.

Maybe you are looking for

  • PLD: B1 always uses the same layout in Sales Opportunity(2005A SP1 PL31&36)

    Hi all, I can change the print layout of Sales Opportunities and Payment Receipts (B1 will show the defined layout in bold), but when I preview it, or print it, the same layout is always used. I have noticed this in 4 systems, using SQL  Server 2000

  • Vmtools on Solaris 10 10/08 (u6) client on an  ESX 4.0 not running

    Hi there I have about 30 Solaris Servers running on an ESX 4.0 Server. Since we updated from ESX 3.5 to 4.0, we also have to update the mvtools. Now I have an interesting issue: after the removal of the old vmtools and the installation of the new set

  • Mapping BW TO CRM?

    Hi Gurus How to Map BW info cube and BW info set to CRM Cheers Mahi

  • Using built-in textures?

    Does anyone know if it's possible to use Keynote's built-in textures (Library/Application Support/iWork '08/Content/Fills/ and then Images or Textures --> show package contents of the files in those folders. There are nice fills and textures, just do

  • Configure Sap NetWeaver MDM with Sap Netweaver XI

    SAP NetWeaver MDM communicates with SAP NetWeaver XI by writing an XML file into a directory on a file server. Can someone gives me  an idea about the path of this file server? How can I configure it?