Some of my contacts are not displayed in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Help?
Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.
Similar Messages
-
a few days ago when I send a message from mail or reply to a message it does so in the name of one of my contacts not me. what do I change to get rid of this problem?
I found the same issue. I went into my yahoo email and did a search for duplicate addresses. Most of those type emails were spam and I think maybe they hacked into my contacts. Once I removed that person the issue was solved. You could add the person again after the issue is resolved.
-
I can't hear anything on my iPad mini4 what do I do this happened a few days ago too
I can't hear anything on my iPad mini 4 and I tried everything what do I do?!? Even when I have headphones on!?
Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again. -
I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!
Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
My photoshop element 10 stop working, I am not able to open ti anymore. ? I posted this question a few days ago and I did not get any anwer yer, please help
I have photoshop premiere element 10 editor and organizer and I have a Macbook pro 10,9,9
When I try to open a picture with element editor or if I try to open PS editor directly I see this
file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.17.35%20PM.png
when I click on Modify it doesn't open and I have this window
file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.21.07%20PM.png
and if I click REOPEN , I still have the same message
Lucie -
what do you think is the problem of my macbook, few days ago, the fan is not working its 000rpm, early this morning, it is working already.
What did the prompt look like? Did it look like the image here? http://support.apple.com/kb/TS3742
-
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
I cleared the internet browsing history a few days ago. Since then, no history from these few days has been saved in there. How can i get it to save again?
I have solved the problem. I accidentally have set it to private browsing.
-
In "Previews" when adding text to a picture I can't change the font, even though a few days ago I could. How do I fix this?
kgwrotethis wrote:
10.6
Use Software Update to update your os to 10.6.8 and anything else that needs to be updated. After the installations go to /Library/Preferences - trash the com.apple.Preview.plist file. Repair permissions, restart your computer and empty the trash. Your Preview issue should now be resolved. -
I have an I Phone 4 and it was working this morning went to use this afternoon the phone is dead. I tried charging it wont turn on at all. I had this happen a few months ago when my phone automatically updated and it crashed the phone. Apple had me do a restore to the phone. I did copy everything to ICloud but is it a software or hardware problem and why wont it boot up. or how do I get it to boot up. Its saying in ICloud its offline.
If safe, carefully slide iPhone into a plastic bag, double bag it for sure. Use items like pencils or kitchen utensils so you do not touch it. Make Genius reservation, and take it to Apple for replacement under Warranty.
-
I DON'T KNOW MY SECURITY QUESTIONS BECAUSE MY DAD MADE THIS ACCOUNT A FEW YEARS AGO! HOW DO YOU CHANGE THEM!?
So how do I change it
-
Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!
Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling -
My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
JinxeWelcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801 -
Photos are not displayed in events/faces/photos but do when magnified
I just reinstalled my OS from 10.6 back to 10.5 (software compatibility). When I imported my iphoto library which I had backed up, everything imported, but I cannot see any of the pictures unless I double-click to magnify. I can see the white dashed outline of where the pictures are supposed to be in the events and photos folders, all of the names appear in faces, etc. but I just can't actually view a photo unless I magnify it. Any ideas?
I just talked to apple support on the phone. They suggested rebuilding the thumbnails, like TD suggested. When I told the support guy that that method did not work, he said that the only other option was to build a new library and import the originals.
I was told to find the iPhoto library in the Users...>Pictures folder, right click on it and select Show Package Contents, then move the Originals and Modified (edited pictures) folders to the desktop. The iPhoto library can then be moved to the trash. When launching iPhoto, it asks what library to use. Select Create New... and the default name and location are iPhoto Library in the Pictures folder. Click save, then go to File>Import to library and select the Originals and Modified folders from the desktop. Any pictures that have been modified are still in their original form in the Originals folder. Both versions (original and modified) of a picture will be imported if both folders are selected for import.
Unfortunately, slideshows, books, folders, etc. could not be saved in my case, but the most important thing is that the pictures are still there.
Hope this helps anybody else with the same problem!
Barrett -
My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on
my audio does not work on my pavilion dv4
This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
Maybe you are looking for
-
Applying a query language to collections
Hi, we handed in a project a while ago that was essentially to read in data from a .DAT file, store it in appropriate collections, then use a basic query language to filter through the stored data. I wasn't really happy with my querying though, as it
-
How can I bend an object to come from behind a page?
I am trying to take the branch below and give it a "wrap around" effect so it looks like it is coming from behind the background. Very much like this: Are there any tools I could use to take the existing image and give it that appearance or would I h
-
Hi, Is report painter can be use by MM,PP,SD module ? in ECC6, we can use report painter for module FI, how about module MM,SD and PP ? if it can use for those module too, how is the step?
-
Re-enable UDF in Marketing Docs
Hi, I had created a UDF in marketing docs with DI API and in my code I set the field to be Enabled = false, ok, no problems until yesterday. Now I need to set Enabled = true but i'm getting the error "The field is not a user defined field" and i can'
-
HT201412 Is there a way to reboot an ipod without using the home button?
My iPod touch 4th gen is unresponsive and needs a reboot, however the home button doesn't work. How can I reboot it without using the home button?