Some of my images do not show up (some do) when I publish a Dreamweaver document

Here's my problem: I have been working on a web site, using Dreamweaver CS6. Working on a mac with 10.6.8. The site has several pages, and several of these pages have several images each. All the images are jpgs. Some are RGB files, drawn from digital cameras. The others are grayscale files, drawn from scans from drawings.
On some pages there are no problems. But there is one page of drawings that has three tables--one table has eight cells that each have an RGB image--fine, no problem. Another table has two cells that each have a grayscale image. Also fine. The final table has eight cells that each have a grayscale image. In Dreamweaver the page looks fine, and when I "preview in browser," it looks fine. But when i publish the page, only one of the images is visible. with Safari or Firefox I can determine that there is a file there somewhere, what its name is--but they don't recognize it as an image, and in fact I get a "404" response.
I have examined the code, and can't find ANY difference ebtween the images thast work and those that don't. I have examined the images, and there are no differences among them that I can find--and there shouldn't be.
I tried just creating a new page, and had the same problem with these images.
The one image among the 8 that shows up only did that when i changed iits location in the directory--but changing the location of other files didn't work.
Any ideas? I have gone over and over the files, the code, the information about the links for hours; this is making me very crazy.

OK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck.

Similar Messages

When I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
I am using I photo 11, 9.1.1.
Thank you

Alt text of image tooltip not showing for some cases

Hello,
I have followed the following steps in adding the alt text of images. Adobe Acrobat X Pro * Add alternate text and supplementary information to tags
However, there is a weird case where the tooltip of the alt text is not shown on hover for a specific page (page 5 of the attached PDF)
http://s000.tinyupload.com/?file_id=63161349344665038065
Please advise if there is something wrong with the PDF that is causing Reader to not show the alt text for the images in that certain page. (and if the PDF should be fixed or is Reader the one that has a problem).
Thanks

RamaRao.G wrote:
I added a JInternalframe on south side of a JFrame.Well, that's plain wrong. JInternalFrame is meant to be added to a JDesktopPane.
I added mouse listeners to JFrame. In mouse release I am placing one image at mouse release x,y location by following statement.
g2.drawImage(bitmapImage, x, y, w , h, null)
Problem is when I do mouse release just near to JInternalFrame component which added south side of main Jframe.
showing some part of image on south panel for a sec and then going back. Directly It should to go back side JFrame .
It should not appear on JInternalFrame even for fraction of sec also.To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

Some of the images are not showing up on my Blogger blog even though the HTML is there. They do show up in Opera.

Here is the link to the blog post -
http://happyholidays-blog.blogspot.com/2010/09/welcome-to-trick-or-treat-street.html
Three days ago I went to a post from last year and an image was gone. The code was there but not the image.
It doesn't get rid of all the images just certain ones and they are consistently gone. It is not a random deletion of images.
I have had images not show up on other blogger sites.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions 
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences.

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences. Is there a solution to this issue?

I've seen the opposite issue. My wife recieved an email with jpg attachments. She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app. I had her forward the email to herself and then they showed up. I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
So yeah. Seems like some bugs. Hope Apple fixes them soon.

Images do not show up

I can get some .gif images to show up in my Dreamweaver HTML
page and can see them when I upload the document.
Other images are not showing up.
The images that show up and do not show up are in the same
"images" folder. All of them have been uploaded.
The images that show up were created by a software program
that made them be .gif images.
The images that do not show up were made in Adobe
Illustrator. I then imported them into Adobe Photoshop and saved
them as .gif, .jpg. png. and even used the "save for web" feature.
I also imported the image into Fireworks and saved it as .gif and
.jpg.
None of the copies of the image that I created are showing up
in a webpage.
I have used the image icon to place the image. I also went to
Insert | Image and put the image in that way. Plus I tried the drag
and drop method to get the image onto the page. In many cases I can
see the image on the page in Dreamweaver, but not when I upload the
page. Not even the alt tags with the red X show up online. Each
image does have an alt tag.
I have no clue what to do because other .jpg and .gif files
are showing up as images. Oh, and when I used a .gif version as the
background, it worked as a background.
If you know why an image I made will not appear after being
linked to a webpage and uploaded, please tell what you know. I am
stumped on this one.
Thank you for any assistance you can give me.
Baffled,
Ntropi

quote:
Originally posted by:
bregent
Always include a url when you have questions about your web
pages.
Sorry, newbie to these forums here.
here's a link to one of them:
http://www.onlineschoolsurveys.com/banner_trial_2.html
With this page I tried using a table and put the images in
spots in the table. The empty spots are where there should be
images. The two images that are there were made by other people.
This link is actually quite obnoxious.
http://www.onlineschoolsurveys.com/oss_banner.html.
With this one, again the only image that shows up is one that I
made originally as a bmp export out of Snap Surveys, turned into a
gif in Photoshop (I think). In the table toward the bottom with the
pink squares there should actually be two pink squares, one should
have an image in it. Being a practice page that I did not expect
others to look at I left the obnoxious background. If this is too
annoying, I can remove the background and repost.
Did you define a site in the site manager?
I'm sorry but I do not know what this means. I regularly have
a site at www.onlineschoolsurveys.com. The first link goes to a
page that is actually a part of the website- I tried using a
template I know works thinking that maybe the non-templated page
was flawed. So if you are asking if these were loaded to an active
website: yes, I regularly have pages at that website, but no, these
pages are not intended to be a part of my regular website. I was
just using that space to practice.
Do the linked images exist within the defined site?
Yes, the images were uploaded. They should exist in an image
folder. Although it may be really stupid for me to make a link to
an unprotected list of files, here is the list of images in my
images folder:
http://www.onlineschoolsurveys.com/images/
Since I am new to using a message board for help, please advise me
if I should not post such directories in the future.
Thanks for your quick response.
Mel

Why aren't my FW (PNG) image are not showing up

Hey guys.
This is really bugging the hell out of me. I feel like I
can't move on until i can figure out why my PNG images are not
showing up in preview (F12). They did yesterday before I deleted
some pages and renamed old pages I no longer needed.
All my images that was done in FW are in my root folder in
the file panel. i didn't move any of those. When I double click on
the image to bring up the "select image source" in the URL it
starts off with two periods then a slash and then the name of where
it's located as well as the name of the image. The "relative to":
is site root. i didn't change any of these setting before I deleted
and renamed pages in my file panel.
Oh, and my Ap Divs show up in light gray boxes.
Please help!
CS3 Mac

I'm confused by the subject line! Is this like 'all of your
base are belong
to us?' 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gki5he$3pu$[email protected]..
> Why_ATL wrote:
>> Hey Alan
>> is the filename exactly what it should be? YES
>> Are these .png files for web use, or are they PNG
fireworks original
>> files
>> which are very large in file size because they
contain all the info on
>> layers and such? They are .png files for the web. I
can't figure out why
>> my Div is showing up in preview instead of my images
There just Div's
>> with the little blue question mark.
>>
>> This is getting harder and harder. I'm trying to
laugh so i don't get a
>> head ache over this. This is weird.
>
> Without a link we can only make wild stabs in the dark.
>
> Dooza

Thumbnails of images will not show

When using bridge on some of my computers, thumbnails of images will not show, only a generic .eps icon. We are trying to view files from an Art Explosions CD library and are using Bridge CS6 V 5.0.0.399

Check this:
Project - Properties - Flex Compiler - Additional compiler options: -use-network=true
If this post answered your question or helped, please mark it as such.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

I made sure the 'Show Icon Preview' box was checked. This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

Image does not show up!

Hello. Im studying java swing and working on some experiment and badly need some help. Im using Graphics2D and not JLable or Icon for some reason. The problem is the image does not show up. What could be the reason and work around? Another, do you know any tutorial on the said matter? Thanks in advance.
import java.awt.*;
import javax.swing.*;
public class ShowImageGraphics
     //Graphics2D g2;
     public static void main(String[] args)
          new ShowImageGraphics();
     public ShowImageGraphics()
          JFrame frame = new JFrame("Sample Graphics");
          frame.setSize(200, 300);
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.getContentPane();
          frame.show();
     public void paint(Graphics g)
           Graphics2D g2 = (Graphics2D)g.create();
          Image img = Toolkit.getDefaultToolkit().getImage("/images/rocketship.gif");
          g2 = (Graphics2D)g;
          g2.drawImage(img,14,5,33,40, null);
}

import java.awt.*;
import java.awt.image.*;
import java.net.*;
import javax.swing.*;
public class ImageExample {
    public static void main(String[] args) throws MalformedURLException {
        URL url = new URL("http://today.java.net/jag/bio/JagHeadshot.jpg");
        JLabel label = new JLabel(new ImageIcon(url));
        JFrame f = new JFrame("ImageExample");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(label));
        f.pack();
        f.setExtendedState(JFrame.MAXIMIZED_BOTH);
        f.setVisible(true);
}

My podcast image is not showing up in itunes

I am using feedburner for my podcast.
I can see in my feed the <itunes:image href="the url of my image"/>
But the image is not showing in itunes?
I just added the image last week, and it is a 1400x1400 pixel jpg.

It can take quite some days for the image to appear. If you've got it correctly in the feed it will appear eventually, it's just a question of waiting.

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Some of my pictures do not show up in the organizer

Some of my pictures do not show up in the organizer. The folders are all there but no thumbnails appear in the organizer. If I do a search for them they are shown but I cannot find them in the organizer.

This is a small...."Bug" I guess you could call it, in the ipods software where if you have songs by one artist and none of them have a album listed with them, they do not show up under "Artist".
I forgot the exact workaround, but I think its something like if you give one song by the artist a album name (By rightclicking it in iTUnes, hitting get info and selecting the info tab) all the rest of the songs will now appear under artist on the ipod

Image is not showing up on Dialog.

Hi Guys
I am getting problem with Dialog. In my Dialog I have created the image field which accepts image from dam by Drag and drop. Whil Iam dropping the image it is showing up inside the Dialog properly and is showing up on the screen also But when I try to edit the image the current image got vanished inside the dialog. I don't understand why it is happening?
while uploading
The above image is not showing up while editing. Could you please help me where I am doing wrong?
here is my dialog.xml
<normalmode
jcr:primaryType="cq:Widget"
collapsed="{Boolean}false"
collapsible="{Boolean}false"
hidden="{Boolean}false"
title="Picture Properties"
xtype="dialogfieldset">
<items jcr:primaryType="cq:WidgetCollection">
<pictureurl
jcr:primaryType="cq:Widget"
allowUpload="{Boolean}true"
autoUploadDelay="1"
ddGroups="[media]"
fieldLabel="Picture Link"
fileNameParameter="./fileName"
fileReferenceParameter="./fileReference"
height="{Long}200"
name="./file"
requestSuffix="/image.img.png"
rootpath="/etc/designs/aib/business/images"
sizeLimit="100"
uploadUrl="/tmp/upload_test/*"
xtype="html5smartimage"/>
<picturealttext
jcr:primaryType="cq:Widget"
fieldLabel="Picture Alt Text"
name="./picturealttext"
xtype="textfield"/>
<picturetitletext
jcr:primaryType="cq:Widget"
fieldLabel="Picture Title Text"
name="./picturetitletext"
xtype="textfield"/>
</items>
</normalmode>
Cheers
Kirthi

Hi Jitendra,
It worked.Perfect. Thank you very much. I want to implement the same in my Custom widget which contains smartimage. But it is not showing up. Here is my Custom widget code for the smartfile but iam not getting Drag and drop jus it is showing up blank. Any idea how can I incorporate the smartfile in my Custom widget.
// Picture URL
 this.add(new CQ.Ext.form.Label( {
 cls : "customwidget-label",
 text : ""
 this.bannerImageURL = new CQ.form.SmartFile( {
 cls : "customwidget-1",
 fieldLabel : "Picture Link: ",
 editable:false,
 allowBlank : false,
 anchor: '75%',
 maxLength : 100,
 cropParameter :"./image/imageCrop",
 ddGroups : "media",
 fileNameParameter : "./image/fileName",
 fileReferenceParameter : "./image/fileReference",
 mapParameter :"./image/imageMap",
 rotateParameter : "./image/imageRotate",
 name : "./image/file",
 requestSuffix : "/image.img.png",
 sizeLimit : "100",
 autoUploadDelay : "1",
 listeners : {
 change : {
 scope : this,
 fn : this.updateHidden
 dialogclose : {
 scope : this,
 fn : this.updateHidden
 this.add(this.bannerImageURL);
Once again thanks for helping me to resolve the issue. The above is another requirement. Any ideas?
Cheers
Kirthi

Image is not showed in Apps Output

Hi,
In Apps output image is not showed, but in report builder output images are showed.
I imported image from my local system. Is there any path in Apps server to keep images?
Thanks in advance.
Regards,
Kalyan

Hi,
Are you working ona Report?. If so please check the concurrent program definition, it should be PDF or Postscript.
Thanks,
Robert

Some of my images do not show up (some do) when I publish a Dreamweaver document

Similar Messages

Maybe you are looking for