Some of my rotation animation is stepping at about one degree increments instead of tweening smoothly.  I'm using classic tweening.  I see that if I select the whole interval and use F6 to convert every tween frame to a key and then select the object at t

Some of my rotation animation is stepping at about one degree increments instead of tweening smoothly.  I'm using classic tweening.  I see that if I select the whole interval and use F6 to convert every tween frame to a key and then select the object at the different frames, that I see under transform that the skew values are changes from frame to frame aroung that same one degree range.  Is there a solution to this?

Some of my rotation animation is stepping at about one degree increments instead of tweening smoothly.  I'm using classic tweening.  I see that if I select the whole interval and use F6 to convert every tween frame to a key and then select the object at the different frames, that I see under transform that the skew values are changes from frame to frame aroung that same one degree range.  Is there a solution to this?

Similar Messages

  • How can I delete apps from the app store? There seems to be every app I have ever downloaded and deleted since I got my phone in 2007. When I go to app store and select update apps there's a menu at the top that says purchased! I would like to delete hist

    How can I delete apps from the app store? There seems to be every app I have ever downloaded and deleted since I got my phone in 2007. When I go to app store and select update apps there's a menu at the top that says purchased and when I select it it shows every app I've ever had! I would like to delete the history please.
    Many thanks

    You cannot.
    The entire point of this is that you can redownload any and all of your past purchases.

  • I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.

    I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.

    Try Settings > General > Reset > Reset Network Settings.

  • How can I figure out what my password is and keep it unlocked?  Every time I do a system update, it requires the password and sends me into cyber trouble with the remember my keychain access, requiring it every time I log in.  A real hassle to be avoided

    How can I find out what my password on the computer is?  I had to change it due to my teenagers helping themselves, and now every time there is a system update, I have to have the password, which I cannot remember or find.  It then wants it every time I log in and pops up Key Chain Access as well.  Very annoying.  I do not have the disc to reload it and fear I would loose everything on my computer as there is also trouble with the back up system.  Too many issues and not enough solutions.  Many thanks in advance!

    I do not have the disc to reload
    Why not?  You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your  profile. 
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.
    ===============
    I have to have the password, which I cannot remember or find.
    When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out. 
    Old school--- > Print it out & keep in a safe place.  A place that ONLY you know about AND never forget.
    New school---> Get a password manager utility.  Highly recommend 1Password which is shareware.  Do a Google search for free password managers.

  • Windows Media Player plugin was working fine before updating to 4 and now i've tried every single advice found in here and still can get it to work even though it is enabled on the add-ons page. Any new trick to try?

    worked fine with 3.6
    updated to 4
    tried uninstall/install plugin
    .dll downloads
    disable/enable different plugins
    next step is format?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Ipod touch will not restore, only gives the apple logo...i have tried every trouble shot i can.. and keep getting the sme results.

    ipod touch will not restore, only gives the apple logo....i have tried every trouble shot... and keep getting the same results.

    Maybe here:
    http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
    Is the iPod jailbroken?

  • DVCpro50 shot at 23.98 interlace problems every fifth frame ... help

    I have footage shot on DVCpro50 with the SDX900 Panasonic camera at 23.98 frame rate and I have captured it with the AJ-SD93 Panasonic deck through the built in Firewire cable to my G5 dual 2,7 ghz sysem with a Lacie Porsche 250 gb drive.
    I captured using a custom capture preset that I made using the DVCpro 50 NTSC compressor at 720x480, setting frame rate to 23.97 (initially and then tried 29.97 later) and checked Anamorphic as well (footage is 16x9).
    The problem is that on playback the image appears to be tearing, especially on all movement. This happens when watching in Viewer and in a sequence (set to match the clips capture settings). When I step through the image frame by frame it is clearly every fourth frame which gets jaggy and the edges of moving objects seperate and "tear" and then it is fine on the next frame. This appears on both my computer monitor and on my NTSC monitor.
    I assumed that meant it was a pulldown issue and tried adjusting the pulldown settings in the playback control to no avail.
    I have done a lot of reading on this discussion board as well as much experimentation with different capture presets and have found only a very slight difference between capturing the footage at 23.97 or at 29.97. It looks slightly better at 29.97 but the problem is still there.
    When I go to the desktop level and look at the quicktime files with the quicktime player they look fine. IE no tearing and smooth playback. When I step through the image with the qtime player every fourth frame is a repeated frame which is also what I see when I look at the master tape frame by frame with the AJ-SD93 deck cabled directly to a NTSC monitor. This I assume is the pulldown on the tape created by the camera when recording 23.97 video rate to the 29.97 tape.
    So then I decided I would take the footage at 29.97 with the repeated pulldown frames since that looks fine on both the tape and the qucktime files BUT when I captured at 29.97 it played back once showing a "clean" image - no tears, the fourth frame a repeated frame BUT then when I played a second time it switched and began displaying the fifth frame as a "tear" again.
    So then I thought this is simply a playback issue and if I edit to tape on the AJ-SD93 it will "pullup" the image and fix the problem as it goes back to tape BUT NO. The tearing was worse when I layed it back to tape.
    SO what is happening? Can anyone out there help?
    My preference is to capture at 23.97FPS DCVpro50 NTSC anamorphic and be able to play back with out any tearing.
    Is this possible?

    you should try capturing as regular run of mill video. launch cinema tools, import the video file, remove the telecine and then import the .rev file into fcp.
    i'm assuming the sdx900 is writing the video at 29.97fps interlaced. changing the frame rate of the capture compressor is mucking up your workflow. try cinema tools, see what happens.

  • Every 12th frame...

    Okay, I have a wedding ceremony that is like 20 minutes long. After using an Mpeg-2 Highest Quality (60 minutes) encode I have the following problem. The whole video looks great up until about the 15:40 mark. At this point every 12th frame of my 23.98 progressive footage has a digitized mosaic-y look. THe weird thing is that eventually gets to the point where it is every frame artifacty. This all happens for about a minute then suddenly everything is back to normal. I tried re-encoding to no avail.
    The original footage is fine, so its not the camera or tape.To make things more interesting, in my edit I am cutting between two different cameras and the effect happens on both cameras footage during this time 15:40 to 16:50 time period.
    There are no effects or transitions used. Also it should be noted that my workflow has been perfect for my first 2 projects.
    ADDITION - I tried just encoding the 15:40-16:60 segment as a separate clip in compressor and it works fine, so I really don't know what to do.

    Thanks Brian.
    I haven't used the Field Shifter Filter because Graeme suggests on another post that it's not required.
    http://discussions.apple.com/thread.jspa?threadID=479251&tstart=0
    Quote: "Remove the Apple shift fields filter - let the plugin handle all the field stuff"
    However, Ive just discovered the problem goes away completely if I set Field Dominance to Progressive (in Compressor).
    Is there any harm in doing this?
    My bulk audience will be watching on TV - and quite a few of them are likely to be people with older TVs and DVD players.
    If it's OK to use Progressive, should I alter the FCP Sequence Settings at all? (NONE - for instance)
    Andy

  • I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    Hi sampa1,
    Can you please let us know the error message you are getting while converting PDF to Word. Also, please let us know the steps you are following.

  • My iphone 4 switches off unexpectedly and does not charge properly every time

    My iphone 4 turns off unexpectedly and does not charge properly every time. Can anyone help

    Hey bigstu29,
    Thanks for the question. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • I just upgraded to Lion. I was trying to set up the iCloud and it asked for my "login" keychain password. I've never been asked for that before. I've tried every password I can think of and nothing works. Is there a way to reset the keychain password?

    I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???

    Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
    There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
    The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

  • Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

    Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
    If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Can't convert timeline to frame animation

    Whenever I try to upload a video clip, it only shows in timeline format and when I try to convert it to frame animation, it says "The video will not play back in frame animation." Help, please

    I do not do video but have an idea if the video segments you want to make a frame animation is less then 500 frames. If larger  split it into 500 frame segments and render the segments to video files. Then  use menu File>Import>Video Frames to Layers.
    That way you can get the frames. Converting video to frame animation seems to create a single frame for each video segment...

  • Easiest way of converting motion tween to frame by frame.

    In the old motion model it was as easy as highlighting all of the frames, converting them to keyframes then removing the tween. But I have no clue how to do it with the new motion model.

    "For whatever reason it converts the tween to frame by frame."
    Flash does this because Flash CS3 doesn't know anything about the new motion spans. So this is the way your animation can be displayed in an older version of Flash.
    (And it's why we added the feature to right-click a frame and convert to frame-by-frame animation - same operation, but allows you to do it for a single span instead of all spans across the entire document).

  • SOME gif images not animating

    I recently noticed some gif's not starting and only showing the first frame until I press view image. The animation mode is already set to normal, I just checked. Besides, some images animate normally...

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Maybe you are looking for