"Some of the object names cannot be shown in their user-friendly form"

Error states:
"Some of the object names cannot be shown in their user-friendly form. This can happen if the object is from an external domain and that domain is not available to translate the object's name"
We are receiving this error when we click on a group with ADUC and the members of that group were added from the trusted domain. Domain A has a one way non transitive trust wtih domain B that is in place and active.
We have checked every possible setting and configuration and cannot resolve this problem. Domain A has Windows 2008 R2, domain B is 2003. Domain A is at a windows 2008 functional leve, domain b is at a 2003 functional level.
YOu can add account from domain B into domain A , but they immediately turn to SIDS once you hit "apply".
Validated trust on both ends
triple checked DNS and see no issues
checked policies
dcdiag returns no errors
Could this be a bug with having a trusted domain on 2003 and the non-trusted domain on 2008 R2?

Hi,
This error occurs if:
(1) the other domain is not available (meaning, not connected or name
resolution is bad, etc)
(2) the object in the other domain has been deleted
(3) Broken secure channel
Please refer to the below link:
http://us.generation-nt.com/answer/objects-names-translation-help-77158972.html
Regards,
Yan Li
If you have any feedback on our support, please click
here
Cataleya Li
TechNet Community Support

Similar Messages

The object name is not allowed to be empty - Message no. R7105

Hello, I'm trying to create "Create InfoObject" in BI 7.0 by right clicking on "InfoObject Catalog". But I'm getting the following error :-
The object name is not allowed to be empty
- Message no. R7105
Can any one tell me how to create "info object".
Thanks,
PV

Just check is their any related logs in slg1, slg0. Also check ST22. If all looks good, then some problem with installation. Are you able to carry out other basic activities like creation of infoareas, infocube, catalogs...etc.
Regards
Pankaj

Error: Object Name cannot be Empty, when loading Master Data

Hi all,
We are loading mater data for one of the InfoObject, which is failing at Processing Step. Data is loaded properly till PSA. There is short dump error giving MESSAGE_TYPE_X error. On analyzing Job Log, We found the error like, "OBJECT NAME CANNOT BE EMPTY".
We checked InfoObject and found that, One of its attribute is inactive. Can it be the cause of error? Please Reply soon.
Thanks,
Harpal

It must be the cause of error. Please activate all inactive attributes and load the data again.
Regards
Pankaj

My new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found

my new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found

Wow .... so you are syncing via WiFi when you sync .... would that be correct?
I would still quit iTunes and then restart and see what happens. The iPad and iTunes must be playing some weird games.
If you do sync via WiFi (I do), I think you are better off closing iTunes when you are done - unless of course you are using iTunes for Home Sharing or something like that. My experience is that if you leave iTunes running, the iPad and iTunes just start sending weird signals back and forth.
Since I started Wifi syncing, I have seen messages in iTunes that made absolutely no sense at all. Anyway, that's my take on it. If you do not WiFi sync, then I have no clue why you are getting these messages.

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

"the ipod 'name' cannot be updated. the required file could not be found."

PLEASE can someone help me out on a problem that is infuriating me?? i've not long had my 30GB 5th generation video ipod, and i can't get any photos or video to transfer onto it! when i connect my ipod and itunes opens up, an error message appears saying "the ipod 'name' cannot be updated. the required file could not be found". however, it updates my music no problem..
i've reset my ipod, restored it and wiped all my music off and then transferred it all back on, downloaded the new ipod updater 28-06-2006 and made sure my ipod has the most recent software etc on there, but still no joy!
i never had a problem transferring photos onto my old colour photo ipod (4th generation?), so it's really annoying that i have a supposed 'better' ipod now that won't do this for me!
any help guys? please note, i am no techie - please put any advice in simple terms!
Packard Bell desktop Windows XP
Packard Bell desktop Windows XP

Hello WGT52,
It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
Thank you for using Apple Support Communities.
Take care,
Sterling

The ipod "name" cannot be updated, an unknown error has occurred (-48)

a few nights ago while i was updating songs to my ipod video, this thing appeared on the screen in a quick flash and i wasnt able to read what it said. then my computer blinked and resetted, causing my ipod to unplug without ejecting properly. so i pulled out the plug from the butt of the ipod only to find out that when i opened it, all my songs were gone. a good 3000 i think. i think i also pressed menu and play at the same time after that.
the ipod "name" cannot be updated, an unknown error has occurred (-48)
this is what keeps appearing on my i-tunes everytime i try to transfer songs to my ipod vid. the weird thing is that when i drag and drop songs from i-tunes to the ipod icon, it says its updating. but when its all done, not a single song appears on my ipod. and it also said something like "cannot be restored" and "ipod service error" on the ipod updater. i've tried on both computer and laptop and am experiencing the same problem. as of now, my ipod is working but it's just all empty. could anyone help? im so frustrated coz this is the second ipod i've purchased since the last one that broke down. thanks.

k i tried that but i couldnt find cupertino usa on my ipod. i did: date and time - set time zone - then a list of places come out with (DST) beside each of em. i chose bangkok (dst). tried to plug it again on i-tunes and the same darn thing appears. that dreaded -48 error. ill check out the rest of those links you guys posted anyway. thanks again for tryin to help.

HT1386 I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I can't get my playlists transferred and when I try to synch my iPad I get the following message: The iPad "name" cannot be synched. You do not have the privilege to make

I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I set up iTunes but my playlists did not come over from my PC. I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched. You do not have the privilege to make changes. I deauthorized my PC and have authorized my Mac...it just won't synch. Help!!

I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I set up iTunes but my playlists did not come over from my PC. I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched. You do not have the privilege to make changes. I deauthorized my PC and have authorized my Mac...it just won't synch. Help!!

The object name is not allowed to be empty - Transormations

Hi Friends,
I'm doing trasnformations for the datasource "0CML_INIT_DFAELL", while doing trasnformations it is giving the error saying that "The object name is not allowed to be empty ".
What is that error? i'm not getting, can i have help from any body?
Thanx in Advance
Regards,
BalajiReddy

Check the transformation rule for all objects, See whether routine icon is there and actually routine might not be there...check whether you have anything of this sort in your transformations.
Jayasudha

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

When syncing iTunes reports "The iPod "name" cannot be synced. A duplicate file name was specified. ". the music is updated but all the sleeve imagary is not including deleting the existing images. How do I solve please?

When syncing iTunes reports "The iPod “name” cannot be synced. A duplicate file name was specified. ". The music is updated but all the sleeve imagery is not including deleting the existing images. How do I solve please?

Hello WGT52,
It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
Thank you for using Apple Support Communities.
Take care,
Sterling

How to add an variable to the object name of the arraylist

Greetings,
i will like to create an object for arraylist with it name concat with a variable. This is what i mean as show below.
for i=1; i <8; i++)
ArrayList list = new ArrayList();
What i want when it loops, the arrayliost will auto create list1, list 2, list3 and so on until the for loops end. How do i add the variable i to the object name list?
Thanks

Do anyone of u mind if let me know hows the code look like?This isn't intended to be an alternative to the previous reply: in fact it's worthless unless you read the information in the link given.
import java.util.ArrayList;
import java.util.InputMismatchException;
import java.util.List;
import java.util.Random;
import java.util.Scanner;
public class ListListEg {
    public static void main(String[] args) {
        Scanner in = new Scanner(System.in);
        Random random = new Random();
            // create the mainList outside the for loop
        List<List<Integer>> mainList = new ArrayList<List<Integer>>();
        System.out.print("How many lists would you like? ");
        try {
            int num = in.nextInt();
            if(num <= 0) {
                System.out.println("Smartass!");
                System.exit(1);
                // populate the main list inside the loop
            for(int i = 0; i < num; i++) {
                mainList.add(new ArrayList<Integer>());
        } catch(InputMismatchException ime) {
            System.out.println("Idiot!");
            System.exit(1);
            // later do stuff with the lists, which you access with get()
        for(int i = 0; i < mainList.size(); i++) {
            for(int times = 0; times < 3; times++) {
                mainList.get(i).add(random.nextInt());
        System.out.println("The first list is " + mainList.get(0));
        if(mainList.size() > 1) {
            System.out.println("The second list is " + mainList.get(1));
        System.out.println("The last list is " + mainList.get(mainList.size() - 1));
}(In reality all the action would not take place in one method like this, and the exception handling would be more useful and polite.)

Help to find out some of the object model for InDesign preference

Hi All,
I'm writing script to update the specific client preferences for each and every preferences of InDesign CS5. I couldn't find some of the object models in Extendscript help. If someone knows, please help to find out this.
These are the list. Also refer screenshot.
1. Dictionary Preference - Language English: USA
                                      Hyphenation
                                      Spelling
                                      Double Quotes
                                      Single Quotes
2. Autocorrect Preference - Language English: USA
3. File Handling Preference - Default Relink Folder
Many thanks in advance.
Peru.

I looked and was not able to find a way to do this.

The database name cannot exceed 50 characters

I am trying to create an offline copy of my BCM database in Outlook 2013. I have connected to my remote server which LeadershipSBSE\BCM and the database name itself is just LS. (I have shortened it as much as I can.) Despite these efforts, whenever I try
and create the offline copy, it tells me the "database name cannot exceed 50 characters."
I quite literally CANNOT shorten anything else. How can I get this to work?
Thank you in advance.
Veronica

As mentioned above, the INSTANCE name that I am typing in is "LeadershipSBSE\BCM" and the actual DATABASE name that I am selecting is "LS". I started with much longer names, but have actually created a second SQL instance with a shorter name (BCM) and a
new database with the name "LS". I quite literally CANNOT make this any shorter.
I am using Windows 8.1 and Outlook 2013.
I think I may have figured something out with regard to the error, though. My profile name was crazy long, since I was using a Google apps profile. When I switched to a different Outlook profile named "Outlook", I no longer got that error message. Now, though
I am getting a "Database creation was unsuccessful" and in the Windows event log, I'm getting an Application error 1000 with these details:
Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x521590bf
Faulting module name: svrenumapi100.dll, version: 2009.100.1617.0, time stamp: 0x4db1edee
Exception code: 0xc0000005
Fault offset: 0x0003a05f
Faulting process id: 0x441c
Faulting application start time: 0x01cef050aed27518
Faulting application path: C:\WINDOWS\sysWOW64\wbem\wmiprvse.exe
Faulting module path: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\svrenumapi100.dll
Report Id: eca67711-5c43-11e3-be6e-14dae951ed82
Faulting package full name:
Thanks.
Veronica.

I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

The recipients have to have an apple device and an apple id.
about messages
http://support.apple.com/kb/HT3529
Troubleshooting messages
http://support.apple.com/kb/TS2755

"Some of the object names cannot be shown in their user-friendly form"

Similar Messages

Maybe you are looking for