Some Question About SRM

Hi experts!
I am very new to SAP so I wonder if you all able to answer some of my questions and doubts here.
1. I have attempt to upload 2 similar attachment with the same name under bid response and strangely it was successful. I wonder if there is anyway I can prevent the users from doing so? A validation Like probably an alert pop up? This is over the web interface btw.
2. We are updating the product master from a r/3 daily by batch using XML. We will send any updates from the material and service master to the SRM to update the product master. So I wonder wat kind of FM or Bapi can i use to merge the Service and Material master into the product master? Do note tis is done daily.
I will generously reward those who can give me something helpful. hope to hear from u all sooN!
Cheers
Jason Chee

Hi Chee,
2. If I understand yr requirement correctly, what you are looking at is delta download for matl/ service masters, which is a standard function for SRM.
For this you need to maintain the tables as per the note 720819.
maintain filters in R3AC1 (if required)
create a request in R3AR2.
and schedule this request as a background job in R3AR4 with desired frequency.
This will update the masters in SRM periodically.
(of course yr other settings should be as per config guide.)
BR
Dinesh

Similar Messages

  • Some questions about configuration in MAX.

    Hello,everyone!
    I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
    I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
    My question as following:
    1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
     If I select stepper,though motor can work but I can't test encoder in MAX.
    2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
    3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
     My English is poor,Pls pardon me!I come from China.
    Thank you for your help!
    EnquanLi
    Striving is without limit!

    Hi,Jochen,
    Thank you for your kindly help!
    The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
    And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
    Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
    1,Motor can't run.
    2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
    Except for the  two points mentioned above,"Following Error" is  occured frequently,I don't know why.
    I am still not clear why I must set the motor type be stepper in MAX .
    And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
    I am verry sorry I have too many questions!
    I am very appreciate for your kingly help!Thanks again!
    EnquanLi
    China
    Striving is without limit!

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Hello , I want to ask some question about ipads \  How powerful is the iPad?  How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device?   please help me :(

    Hello ,
    I want to ask some question about ipads \
    How powerful is the iPad? 
    How useful is it for reading books, newspaper or magazines or for surfing the web?
    Can you identify any shortcomings of the device?  
    please help me

    it's less powerful than your average computer. THink of it like a netbook but with a better processor.
    It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
    You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
    I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
    By and large, it's a good device for day to day stuff, but is not a computer replacement.

  • Some questions about javacard 2.1.1 and smartcardio

    Hello i have some question about java card 2.1.1 and the smartcardio package.
    1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
    final static byte P1_CREATION_MODE = (byte) 0x01;
    final static byte INS_SIGN_MODE = (byte) 0x60;
    final static byte SmartCard_CLA = (byte) 0xB0;
    private void signMessage(APDU apdu) {
            byte[] buffer = apdu.getBuffer();
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            signature.init(privateKey, Signature.MODE_SIGN);
            short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
            apdu.setOutgoingLength((short) length);
            apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
            apdu.setOutgoing();
        }On the host side I use the following code to connect to the card and to send the sign apdu:
    if (TerminalFactory.getDefault().terminals().list().size() == 0) {
                LOGGER.log(Level.SEVERE, "No reader present");
                throw new NoSuchCardReader();
            /* Select the first terminal*/
            CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
            /* Is a card present? */
            if (!terminal.isCardPresent()) {
                LOGGER.log(Level.SEVERE, "No Card present!");
                throw new NoSuchCard();
            /* Set the card protocol */
         Card card = terminal.connect("*");
            ATR atr = card.getATR();
            LOGGER.fine(getHexString(atr.getBytes()));
            LOGGER.fine(getHexString(atr.getHistoricalBytes()));
            CardChannel channel = card.getBasicChannel();
            CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
         ResponseAPDU response = channel.transmit(cmd);
            card.disconnect(false);But this does not work and i got the following error
    javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
            at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
            at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
            at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
            at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
    Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
            at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
            at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
            ... 3 more2.) 3Des encryption
    I want to use the 3Des algorithm to encrypt my data. I use
    keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                        KeyBuilder.LENGTH_DES3_2KEY, false);
    cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
    3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
    new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
    // the method in the applet
    private void setServerKeyMod(APDU apdu) {
            byte[] buffer = apdu.getBuffer();
            try {
                byte byteRead = (byte) (apdu.setIncomingAndReceive());
                short off = ISO7816.OFFSET_CDATA;
                // strip of any integer padding
                if (buffer[off] == 0) {
                    off++;
                    byteRead--;
                publicKeyServer.setModulus(buffer, off, byteRead);
            } catch (APDUException ex) {
                ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
        }The error code is 6700
    4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
    CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
    java.lang.IllegalArgumentException: ne must not be negative
            at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
            at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
    If you need more code to help please let me know.
    Cheers
    Edited by: 858145 on 06.07.2011 08:23

    2) What is PKCS? what is the difference between
    PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
    PKCS #11: Cryptographic Token Interface Standard
    See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
    PKCS #15: Cryptographic Token Information Format Standard
    http://www.rsasecurity.com/rsalabs/node.asp?id=2141
    If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
    BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
    Jan

  • Some question about fade in // fade out by hideEffect and showEffect in Actionscript

    Some question about fade in // fade out by hideEffect and
    showEffect in Actionscript
    Please kindly take a look at the following page:
    http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
    (can view source)
    I tried to make an image preloaded and scale the image to
    it's preferred size.
    When I came to consolidate the stuff into a component, I
    found the application goes weird as I implementation the show/hide
    effect.
    The third trial which just hide and show the images directly,
    instead of using viewstack, fail to bring the second image onto
    screen.
    It just used fadeOut instead of fadeIn(you see there is a
    flash of the second image)
    After some study of showEffect and hideEffect behaviour,
    seems the mechanism of hide/show a component works in this way:
    this._fadeIn:Fade = new Fade();
    this._fadeIn.alphaFrom = 0;
    this._fadeIn.alphaTo = 1;
    this._fadeIn.duration = 1000;
    this._fadeOut:Fade = new Fade();
    this._fadeOut.alphaFrom = 1;
    this._fadeOut.alphaTo = 0;
    this._fadeOut.duration = 1000;
    Component_A.visible = true;
    Component_A.setStyle("showEffect", this._fadeIn);
    Component_A.setStyle("hideEffect", this._fadeOut);
    then when I set Component_A.visible = false, the sequence
    works like following:
    Component_A.visible = true
    Component_A.visible = true, alpha = 100;
    Component_A.visible = true, alpha = 50;
    Component_A.visible = true, alpha = 0;
    Component_A.visible = false;
    The above sequence works visa versa as:
    Component_A.visible = false;
    Component_A.visible = true, alpha = 0;
    Component_A.visible = true, alpha = 50;
    Component_A.visible = true, alpha = 100;
    Component_A.visible = true;
    (Correct me if i am wrong)
    ========================================================================================== ====
    From what I observe from the application, I have two
    question.
    1) When more than one component using the this._fadeIn,
    this_fadeOut as the hide/show effects, the component in instance of
    this._fadeIn? will it mess out if more than one component using the
    fadeIn instance in the same time?
    2) from the third component, i.e. PictureHolder3, when I load
    other the picture , it fade out the new image instead of fading
    in... Seems there is problem if I hide show too frequent. I think
    when I hide then show right the way, the component only do the hide
    part...
    Can someone pls look into it and tell me what I did wrong?
    Cuz in normal practice I don't think appropriate to use ViewStack
    in Actionscript...

    Hello Jack,
    Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
    Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
    1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
    2. http://www.youtube.com/watch?v=5in4swnIFsw
    3. http://www.youtube.com/watch?v=KnBFLQheOk4
    Hope this helps.
    Cheers
    Parikshit

  • Some question about communicating the usb RAW device

    I have some question about USB communication: I want to make my VI communicate
    TI-DSP by USB, now, the driver of USB on DSP have done, and  there are a test
    program writen by VC and a driver fold(with a .inf and a .sys files), when I
    install the driver and run the test program, the driver program on DSP run
    regularly. And then I want to program a VI which have the same function as the
    test program, so I unload the driver on PC firstly, then install the DSP in
    NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
    Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
    Dev  Phase  Data                       Info           Time   Cmd.Phase.Ofs    
     15  CTL    80 06 03 00 - 00 00 04 00  GET DESCRIPTR  5.2sc        56.1.0       
     14  CTL    80 06 03 00 - 00 00 04 00  GET DESCRIPTR   11us        57.1.0       
     14  USTS   00 00 01 c0                canceled       2.0sc        57.2.0       
     15  USTS   00 00 01 c0                canceled         5us        56.2.0 
    PS: the software I use to capture the data is BUSHOUND
    1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
    2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
    Thank for any reply~~!

    逍遥浪子 wrote:
    I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and  there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
    Drivers". When I sent the standard control request using the VISA test
    panel, the status below happened. I don't know what wrong with my step. Dev 
    Phase 
    Data                      
    Info          
    Time   Cmd.Phase.Ofs     --- 
    -----  ------------------  15 
    CTL    80 06 03 00 - 00 00 04 00  GET
    DESCRIPTR  5.2sc       
    56.1.0         14 
    CTL    80 06 03 00 - 00 00 04 00  GET
    DESCRIPTR   11us       
    57.1.0         14 
    USTS   00 00 01
    c0               
    canceled      
    2.0sc       
    57.2.0         15 
    USTS   00 00 01
    c0               
    canceled        
    5us        56.2.0  PS: the
    software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
    Someone told me it must be done by calling .dll fies in LV, but I want
    to know if LV can program the function directly without calling .dll
    file?
    This thread
    contains already a related answer and explains what a sys driver is.
    While you could theoretically use the Call Library Node to call all the
    necessary Win32 API kernel functions to connect to a device driver,
    this would be very cumbersome and not doable without a real good
    understanding about C programming. Writing an interface DLL instead
    won't need more C programming knowledge at all but will give you a
    clean interface to that device driver which eventually could be used in
    other programming environments as well.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Some question about 9iAs R1.2.2 & R2, need your help:

    Some question about 9iAs R1.2.2 & R2, need your help:
    Since 2000, we has used 9iAS Core (R1.2.2) to publish our website. The platform is Suns Solaris (SPARC). The database is Oracle 8i. But there are so many questions:
    1.     The Web Cache cant be installed well
    2.     The web pages use JSP to query database with SQL show errors when we refresh the page a few times. The error will disappear after restarting the 9iAS or refreshing the page again. On the other hand, the same pages dont show error on resin. The error is java.sql.SQLException : Closed Connection: next. I supposed that the connection of database has some hidden troubles, but I can find it, could you give me some advice.
    Now I have installed 9iAS R2, But when I visited the manage page, I found that a password is needed to visit the web cache manage page. I dont think I have set the password, and then I cant control the web cache. I want to know is a default password occurred? If not, what is the password.

    The default password for Web Cache is: administrator
    See walkthrough on the sample code page: http://otn.oracle.com/sample_code/products/ias/content.html
    HTH,
    Ashesh Parekh
    Oracle9iAS product management

  • Some question about Toshiab reocvery disk for Satellite P300-133

    Hello guys ,
    I got some questions about unpleasant recovery surprises :
    *1)* I just made recovery DVD using Toshiba Recovery Disk Creator and it initially asked for 2 DVDs - but when the first one was done it didn`t require a second blanc DVD . Is it possible all system files of Windows Vista to be written on 1 DVD ?
    *2)* Could I reinstall Windows Vista using the HDD Recovery option ( by pressing F8 ) without using recovery DVD ?
    *3)* Which HDD partitions`ll be formatted ( just system C: or both C: and E: ) using HDD recovery ?
    *4)* What is recovery DVD - Image of the hard drives or Vista installation files ?
    Its pretty bad idea not to include OS on DVD when I have paid for it.
    Thanks for all the problems to Toshiba :(

    1. I think the recovery disk creator means 2 CDs. I have a Portege M700 with Windows Vista and one DVD too. I recovered it and after this I have a clean Vista installation with all drivers and tools from Toshiba. Nothing is missing.
    2. Yes, you can reinstall Vista using the HDD Recovery option when you press F8 at startup. You dont need the recovery DVD but you should create one when your HDD get some errors or something else. If you need a new Recovery DVD, you have pay for one.
    3. The complete HDD and partitions will be formatted, so backup your data first on a DVD, external HDD, USB stick or something else.
    After the reinstallation you have the factory settings.
    4. The recovery DVD is an image of the HDD about the factory settings. If you make a recovery, there are all drivers and tools already installed. Of course on the disk are the installations files of Vista, but you can only use this DVD on your Satellite P300. The disk can not be used on an other Satellite or on a PC.
    When you have more questions, have a look in the user manual. There are a many in formations about the recovery. Its in chapter 3.

  • Some question about Cisco Prime Infrastructure

    Dear all
    I have some question about using Cisco prime Infrastructure:
    - Can I show how many user access to one Access Point (AP) ?
    - If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
    - How many time do Cisco Prime Infrastructure refesh user  informantion .?
    Please help me and send picture about it if you can.
    Thank you so much.

    Hi,
    I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
    1- You can surely find how many clients associated to a specific AP.
    - Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
    3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Some question about georaster?

    Hello,
    I have some question about how to create high efficiency georaster model. I have 3T capacity raster data. It's bands is from 8 bands to 12 bands and the resolution is 0.5 meter. In order to ensure the original information of raster data, I consider not use the SDO_GEOR.mosaic, this means that a import file is a georaster object. I keep the original data capacity, not compression. I use JPEG-B to compress pyramid data.
    Does anyone can tell me my georaster model is OK? or tell me some areas for improvement.
    Thanks who have lool my page.

    i don't have specific performance number on georaster using bigfile tablespaces. "A bigfile tablespace with 32K blocks can contain a 128 terabyte datafile" and should be doable with georaster in considering your data size is just 8 TB. It should have some advantages over small file tablespaces, for example, it would be easiler to manage because it has only one datafile. but note, "Bigfile tablespaces are intended to be used with Automatic Storage Management (ASM) or other logical volume managers that supports striping or RAID, and dynamically extensible logical volumes". "Using bigfile tablespaces on platforms that do not support large file sizes is not recommended and can limit tablespace capacity." please refer to the Oracle Database Administrator's Guide.
    thanks

  • Some Questions about NI-6602

    Hello!!
    I have some question about NI-6602.
    1.What is the difference between Port and Line ?
    What's the difference of Line nad Portin these functionIG_In_Line,DIG_Out_Prt,DIG_Line_Config,DIG_In_Prt,DIG_Out_Prt,DIG_Prt_Config
    2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software?
    Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?
    3.Can we apply gate to this fuction ND_PULSE_TRAIN_GNR?
    4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?

    Hello,
    Thank you for contacting National Instruments.
    "1.What is the difference between Port and Line?"
    A Port is a collection of lines. Usually 8 lines to a port.
    "What's the difference of Line nad Portin these function DIG_In_Line, DIG_Out_Prt, DIG_Line_Config, DIG_In_Prt, DIG_Out_Prt, DIG_Prt_Config"
    These functions either perform an output or input, or configure your digital ports and lines. Please see the Traditional NI-DAQ Function Reference Help found under Start >> All Programs >> National Instruments >> NI-DAQ >> Traditional NI-DAQ Function Reference Help for more information on these functions.
    "2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software? Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?"
    You can apply a gate signal from software. For example you can use the 6602's Timebase to gate your counter during pulse measurement applications. You can also route a counter's output to the gate of another counter internally. Look up Select_Signal in the Function Reference Help for more details.
    "3.Can we apply gate to this function ND_PULSE_TRAIN_GNR?"
    I am not sure what you are asking here. ND_PULSE_TRAIN_GNR is a parameter used in the GPCTR_Set_Application function to set up a counter for pulse generation. Please see the page titled "application = ND_PULSE_TRAIN_GNR: GPCTR_Set_Application" in the Function Reference Help more more information about this parameter.
    "4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?"
    There is no function to read the state of the source pin. You will need to route the source pin to a PFI line and perform a digital read on that line.
    I hope this answers your questions. Please feel free to reply if you have any further questions.

  • Some question about the renegotiation function in SRM Contract (GOA)

    Hi All Expert,
    We are on SRM 5/4.6,  there is a question about the renegotiation function in SRM GOA.
    Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
    Will the item price updated automatically after the renegotiation?
    Many thanks in advance!!!
        Wendrin

    Hi Sanjeev,
    Many thanks for your help.
    One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
    Thanks and best regards
    Wendrin

  • Some questions on SRM 2007

    Hi All
    As per my earlier knowledge SRM 2007 ( EBP 6.0) is going to be released in Q4 2008.
    I read some people referring to it as SRM 7.0.
    1) Is this wrong or SAP has officially changed it to SRM 7.0.
    2) What is the corresponding version for SUS ?
    3) Is MDM an absolute must for SRM 2007 , or CCM is OK?
    Regards
    Kedar
    Edited by: Kedar Ghayal on Aug 15, 2008 1:35 PM

    Hello everyone,
    I found this thread incredibly interesting.  There are frequent questions coming from clients and internally about SRM 7.0.  But there seems to be a lack of documentation (or at least itu2019s difficult to find).  The last official memo from SAP I know of is nearly a year old (Oct 2007 https://websmp203.sap-ag.de/~sapdownload/011000358700001040832007E/SRM2007Communication.pdf).  The release documentation (https://websmp208.sap-ag.de/releasestrategy) is dated Jan 2008, which states release November 2008.
    In light of this have a couple of questions:
    - Does anyone have (or know of) any documentation detailing the new functionality compared to SRM 5.0 (or SRM 4.0)?
    - Does anyone know of any more recent official communication from SAP other than those mentioned above?
    Any help gratefully received.

  • Some questions about SAP esourcing

    Hi expert,
    I have one question about SAP eSourcing. In RFQ document, before RFQ award is published, our customer do not want the price of RFx response disclosed to collaborators. After the award is published, the price can be released to collaborators. As I know, we can use page customization to hide page field. But the price is collection field. So I failed to use page customization to hide it.
    Pls advise me how to realize it.

    Hi
    Please go through the relevant pointers ->
    eSourcing covers some scenarios in SRM for Bidding and Auctioning.
    Have a look at following link for some infos:
    http://help.sap.com/saphelp_srm50/helpdata/en/56/c34e3c59bfe747e10000000a11402f/frameset.htm
    Re: e-sourcing
    eSourcing 4.2 - Page Customization/Extensions
    Re: eSourcing withSRM or eSourcing with ECC?
    Hope this will help. Do let me know.
    Regards
    - Atul

Maybe you are looking for

  • Ctrl+shift+U - Unicode input, how to disable?

    Anyone knows how to disable ctrl+shift+u unicode input? Whenever I press ctrl+shift+u, I get an underlined "u" and can enter some unicode number. However, I don't need it, and because of this, for example in qt creator the predefined "ctrl+shift+u" k

  • Need to reinstall CS5.5 but do not have the disk - download is just not completing. I do have the serial number but have never got that far!

    I need to reinstall CS5.5 but no longer have the install disc. I have tried downloading this directly from Adobe and have used the cleaner tool the download is just not completing. I live on an island so internet speeds can be variable. Can't get a d

  • Read receipt on icloud... does it work?

    I was on icloud today and someone sent me an email and I mistakenly clicked on it without thinking first. I don't want this person to know I've seen their email at all as well, long story short, I'm not wanting them to contact me anymore. If they sen

  • Javascript from Java - calling html control functions

    i have called the attributes of an html control from java using this method private JSObject iframeObject; iframeObject=(JSObject)win.eval("parent.document.getElementById('"+popupIFrame+"')"); iframeObject.setMember("src", "../Applet/Popup.html");but

  • MeetingPlace Load Balancing

    Couple of questions about MeetingPlace 7. -What is the best way to provide fault tolerance to the MP web servers? Can you front end with a CSS/ACE or is it best to just have multiple DNS 'A' records for all of your web servers. -If you enable SSL on