Some question from a new N97 owner

Hi all,
So I just got my new N97. I have a few questions:
- Configure home screen: So far I can add 2 shortcut bars (each can contain 4 application). I want to add more short cut bars, is there anyway? In the selection list when choosing the bar item to place on the home screen, there is no "shortcut 3" item.
- Screen saver: So far my N97 locks key and screen becomes black and locked very fast (about 10 seconds) no matter how I try to change to settings. Actually there is nothing displayed (back screen) at all. And to wake up, I have to use the lock/unlock slide on the side. Is this normal? I can't touch the screen to wake it up? I got to Menu > Settings > Phones > play with settings there but no use. Do I need an application to have the screen saver feature? Is this a device flaw or do I have to change settings somewhere else?
Thanks in advance.
-Caten

hmm i have a n85 as well hence my response to you in regards to the screen saver. yes it shows those options but eventually it does go all black. unless i missed something with my phone. which is possible as i no longer use it as my primary device. the only option right now for you to customize home screen is to wait for n97 app MyPhone that hopefully will soon be released for your model. nokia phones have never nor will they ever behave in a iphonish fashion hence no possibility to set apps up as you would like. n97 is full of customizations just not exactly how you would like them to be who knows perhaps with future updates it will become even more flexible but for now its either that or waiting for MyPhone to be released. sorry. 
ps. i am greatly surprised that n97 would not have a screen saver options at least similar to the n85 that worries me as i am also awaiting arrival of my brand new n97. so hearing all kinds of news makes me a bit concerned about this new phone. time will tell. sorry i dont have anymore news for you.  
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • Basic questions from a new mozaic owner

    I have some very basic questions about how to use the new mozaic 2G mp3 player. I bought the Mozaic because it has a speaker and sleep timer, but I'm finding it to be much harder to use than other mp3 players that I have had (Ipod shuffle, clix etc). This may reflect my failure to look in the right place but I have to say the "help" section isn't much help.
    Here goes:
    . I download podcasts to listen to during my morning run. WMP provides an easy to find place in its program, "recently added," which allows the user to just work with those files. As near as I can tell, Creative makes you wade through all of your tracks. Is there some way to create a file to which "recently added" tracks, or specific tracks, can be dumped? How about automatic tagging of these added files?
    2. I have several thousand pictures on this hard dri've. Apparently, the Mozaic Centrale
    Is going to copy all of them, which strikes me as a waste of space. Is there a way to shut this function off? I couldn't care less if a single photo was added to the centrale program (or whatever it's called). Is it really going to duplicate all of the jpg files?
    3. I have the Zen Stone plus speaker which has served me very well. I had similar problems working with whatever Zen was calling its media player and wound up using WMP instead. I"d like to take a run at using the dedicated Zen media player....
    I apologize for the basic nature of these questions, but the answers weren't obvious to me from the materials I was able to locate.
    gba

    sineadholly wrote:
    Problem with speaker. I read you need to do a firmware update to get the speaker option on your product's menu so i've completely updated it, but still no option to switch speaker on, and won't just come on when i unplug the headphones, any ideas?
    what exactly is the model of your Mozaic? Is it EZ 00, EZ 300 or plane ZEN Mozaic?

  • Hi there.....some questions from a new musician (on this forum that is)

    Hey!
    New guy here......37 year old Swede, living in Los Angeles since 1988......guitar player since age 12. Pretty new to the whole computer recording thing, now working in GB3 and have Logic Express.......Some quick questions.......
    A decent audio interface?.......Right now Im running through a Line 6 POD XT PRO (the rack mounted version) It works great, for recording guitars (real) and bass and such, but recently aquired a Roland PC-200 MK midi controller, and the POD does not recognize other midi devices...? (understandably, as it is a guitar thingamagig)
    All my buddies do Pro tools, and was thinking maybe going the way of that......I understand the M-box works with garageband and Logic, albeit not SO good as let's say a Presonus Inspire or Firebox......What to do?
    Still debating wheter going with Protools or Logic? Positives, negatives please......
    I heard that ProTools is more live recording, versus Logic is more MIDI friendly.......? Understanfably you can do EVERYTHING you can do on Pro tools on Logic, I guess the difference is, if youre working with it (I am not) then perhaps if time is an issue, you choose one or the other depending on what works best.......
    I sit home, record, Time is plentiful, but do plan on recording a CD (solo material) mostly guitars, bass, midi drums and keyboard and vocals......
    Anybody with any input, suggestions etc.... will be greatly appreciated.....
    I'm glad to be here!
    Stefan

    Welcome to the forum Stefan.
    You are pretty much right on about Logic vs Pro Tools. Logic is mainly a MIDI sequencer (and the best one at that!) with added audio recording capabilities, while Pro Tools is mainly an audio recording DAW with some MIDI capabilities (I hear that Pro Tools 7 is pretty darn good with MIDI, but haven't tried it).
    Regarding the interface, what's your budget? If you have the money and are very serious about recording, I would suggest getting the Apogee Rosetta 800 (or 400). If money is tighter than that (as in my case) I would go for the Presonus Firepod. Best in it's price range by many accounts. If that's too many inputs for your needs, then I would suggest it's little brother, the Presonus Firebox.
    You'll also want to check into getting some decent monitors (speakers). All this stuff is useless without something to listen to. And they need to be accurate.
    Good luck,
    X

  • Some questions from a new user of Inventory

    Hi,
    We have some issues with our Zenworks 7 Inventory services :
    1) When we do quick report or data export, the number of object listed are not representative. Some WS are missing and other WS are in double (but not the same data associate).
    2) I've try to set the removal policy but on the server each hour I have the message "No removal policy found".
    3) What's the best way to starting from scratch ? I mean, flushing all DB entries, deleting WS object and force a full scan for everyone to be sure that we have an up to date inventory starting from now ?
    Any help will be appreciated.
    Patrick

    Hi,
    I follow all .ncf call starting from StartInv.ncf and everything looks fine.
    I look in the properties of the server package of the Zenworks server, I see you can define rules (policies) to different level (General, Windows, Netware and Linux). The removal policy is defined at the Windows Level, is it the right place to be ?
    Patrick
    Originally Posted by mrosen
    Hi,
    ppellegr wrote:
    >
    > Hi,
    >
    > We have some issues with our Zenworks 7 Inventory services :
    >
    > 1) When we do quick report or data export, the number of object listed
    > are not representative. Some WS are missing and other WS are in double
    > (but not the same data associate).
    >
    > 2) I've try to set the removal policy but on the server each hour I
    > have the message "No removal policy found".
    >
    > 3) What's the best way to starting from scratch ? I mean, flushing all
    > DB entries, deleting WS object and force a full scan for everyone to be
    > sure that we have an up to date inventory starting from now ?
    >
    Starting fresh of coure doesn't help you, as this does nothing to the
    fact that your policies don't work, so we first need to get this fixed,
    and *then* we can decide if it's still required or easier to start with
    a new DB.
    So, in the properties of the server running the removal service in
    ConsoleOne, do you actualyl see the WS removal policy in assigned or
    effective policies?
    If it is there, and you still see the server claiming it can't find a
    removal policy, then follow the trail of your startinv.ncf. It calls two
    other .ncf files, look at them closely. They should contain your
    servername and context as parameters in the program calls. Is there
    something wrong with them? (E.G, did you by chance move or rename the
    server since installing Zen)?
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    Untitled Document

  • Some questions from a new dba.

    Hello.
    I'm on a quest to learn Oracle. But in learning I've hit acouple of things that seem confusing or contradictory. Maybe someone more experienced can help me understand thse.
    1) When you mount but don't open the database, you'll get a "ORA-01219: database not open: queries allowed on fixed tables/views only" warning. If I then try and query the "static" data dictionary tables such as "ALL_USERS", I get this warning again. However, it seems like most of the V$ tables can be queries with no problem, such as V$INSTANCE. This seems contradictory, because the manuals describe the V$ tables as dynamic. How is it that I'm supposedly only able to read from "fixed" tables but the dynamic tables seem to be the only ones I can access?
    2) When I create a new user, I grant the user the CONNECT role. According to the manual the CONNECT role allows "CREATE TABLE" permissions. However, when I try and create a table as that user I'll get an error (wierd quota errors, actually). However, if I grant the user the RESOURCE role the user can create tables without a problem. I asked my DBA about this an she said this is normal "Don't worry about it", but I can't help but feeling like this is just wrong. Is the manual wrong or did I miss something when I created the user? I don't want to hand out roles I don't need to.
    Thanks! If anyone can straighten me out on these I'd really appreciate it.

    Actually CONNECT role allows the following privileges:
    ALTER SESSION
    CREATE CLUSTER
    CREATE DATABASE LINK
    CREATE SEQUENCE
    CREATE SESSION
    CREATE SYNONYM
    CREATE TABLE
    CREATE VIEW
    The problem you are having is that while you can create a table, you don't have any quota in a tablespace to create the table in. You need to assign quota to your user on a tablespace.
    i.e. alter user ME quota unlimited (or n) on data;
    Then you'll be able to create a table. The reason that granting the RESOURCE role allows you to create the table is that the resource role includes the UNLIMITED TABLESPACE privilege which gives you unlimited quota on all tablespaces in the database.
    This is a common misconception among many DBA's CONNECT gives you much more than connect to the database, if you just want connect to the database grant CREATE SESSION to the user.
    Hope this helps.

  • Basic time machine question from a new mac owner

    Hello. I have an icon on my computer that says time machine and when i select the open time machine preferences, it takes me to my set up for my airport extreme.. is this correct or is time machine something additional that i would purchase to set up?

    Thanks for the star and no problem, I would recommend that you get yourself an external drive though for backup. With any computer not having a backup system is gamble and sooner or later you will lose. If you do decide on a TM backup drive it would be wise to get one that has Firewire or Firewire 800 connections (for speed) and it should be about 2x the size of your interal drive if possible. Once you connect one TM will automatically back up your system and continue to back up every hour only backing up changes and addtions. So for example if you keep music and pictures and are continually adding material to your computer those are memories that you don't want lost if your machine has a failure, TM will help prevent that from occuring. It is one of the coolest features of Leopard. Two pieces of good news, TM is simple and external hard drives are fairly inexpensive these days.

  • 2 questions from a new Mac owner

    Hello everyone,
    I just recently purchased my first Mac (Macbook Pro) and am really enjoying it. I have 2 questions that I cannot seem to find an answer for.
    1: Is there a way to reverse the FN keys ( I dont like having to hit FN + F9 to use expose, i hardly ever use the those keys except for volume). Is there a way to make it so when i press the keys i get the normal key and if i want to use the features of the key hit FN + Key? I cant find any way to do this, weird because the documentation for Leopard never mentioned anything about me having to hit FN+F9 etc to use the features
    2: Whenever i reboot into bootcamp and start to play a game, the notebook fans start going crazy and it heats up considerably fast. I usually stop playing after half an hour out of fear i will overheat. Is this normal behaviour for this to happen or could there be something wrong with my notebook?
    Sorry if these sound silly, I am new to all this

    1. I don't think you can since the keys serve two purposes. However, an intrepid programmer may have written a utility for that sort of thing. One never knows. Search at VersionTracker or MacUpdate.
    2. Yes, that's normal because Windows does not have any fan control implemented. I don't think there's a solution for this common problem.

  • Some question from a new faceTime user

    hi all
    I have just downloaded the facetime application to 2 of my macbook pros I have.
    1. I could not yet establish a call between these two. the caller side keeps calling without any ring getting to the other side when sometimes it does the application shows a "connecting ..." message long enough (few minutes ) for me to cancel the call.
    any ideas ??
    2. can someone tell if i can send an HD quality call with a non buit-in camera (for example Microsoft live HD camera)

    1. Are you using a different Apple ID on each? I don't know if an Apple ID can call itself. It might be like trying to dial your own phone number.

  • Why can't I post a question from my new system?

    Hello All:
    I was just trying to post a question from my new mbp but it wouldn't allow me to do anything.  It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything.  I've been asking questions for quite a while and have never seen this.  I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me.  Can anyone explain this to me please?  BTW, my new system obviously has Yosemite on it while my older bmp has Lion.  Thanks in advance, to all those who respond.
    Regards,
    Ciaochiao

    ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
    Here is my ASC work flow...
    1) I login.
    2) Block the automatic 30 minute logout.
         Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) . Filling out a reply is the exception to the thirty minute window.
            Start an auto reloader.
    Safari = SafariTabReloader
    Firefox = ReloadEvery: "Reload web pages automatically"
    Others = Reloaders | Cerberus - Support Center
      You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    Reply technique
    Open a new browser window.  Pick some discussion.  Open a reply window.  As long as this reply window is open, you will stay logged in.  The 30 minute times is reset as needed by the ASC software.
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id:  
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) Adjust the ASC web page layout.
    For FireFox
    I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    For Safari
    "ASCPowerTools is a Safari Extension designed to give more control"
    http://www.etresoft.com/ascpowertools
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
    Greetings
    *update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

  • Some questions from a newbie...

    Hello,
    I just switch to the Adobe Design Suite and bought LightRoom too. Since I worked more than 25 years with Corel I have some questions:
    01. Is or will there be facial recognition? (like in "Elements")
    02. When adding photos from a card is there a way to add the coordinates from a GPS log to the photos?
    03. Does noise reduction work with exif values (iso, camera model etc) from the specific photo or is it a "general" reduction?
    04. Is there a place I can download more web/HTML templates?
    05. When adding keywords and other meta data, can they be used in other programs too? (Will they show up in other graphic programs?) Or is it a specific "LightRoom" thing?
    Thanks for any help,
    Theo

    Hello Pete,
    Yes, I do understand that it will take time. But I must focus on Photoshop and Dreamweaver first since these are the programs that I use most of the time on a daily basis. I worked with the demo versions too to get an impression of what I was about to buy.
    I worked with a DW version from Macromedia and used Corel for more than 25 years. Since CorelPaint was crashing all the time and more and more people were complaining, I switched radically to Adobe. The reasons I had, besides the crashing, is that I could start fresh and use it with my children now. They have to use it for school purposes etc. Also I believe that Adobe is leading in the world and makes it more universal for us to work with. I found a lot of stuff on the internet like manuals etc. and will go into that soon. I'm aware of the fact that posting here is best done with problems not covered in help, but of course I tried the find it first myself. I must add that although we speak and read English fairly well, the technical aspect is sometimes harder for us to understand and find in English. But again, since it's used so much over the world we choose the English versions.
    Seeing the helpful answers I got, I'm glad I posted it.
    All the best,
    Theo

  • HP Mini 110 Audio Questions from a new owner

    Good evening, all,
    Tonight I picked up a Mini 110-3110NR from a local big-box store.  It was a return but 'should' be OK according to the salesperson.  If not, all I need to do is bring it back.
    Well, there are two things that are...  odd... 
    1)  There are a lot of irritating 'ping' sounds coming from the speaker.  I turned off system sounds and now don't hear it.  But, I want some system noises.  Aside from going through each system sound, thought I would ask here.
    2) A little more odd is the fact that while the audio is working and in stereo, the audio only comes from the front right side of the case.  Ah...  Is that normal?
    Anyone?  TIA.
    -Ken

    Will try to answer your problem
    1. What kind of ping sound? A high pitch one? hopefully not like this Call HP ASAP so that it can be fixed.
    2. The stereo sould should come from both speaker but not in the same load, test it here --> left and right
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Questions from a new MacBook Pro owner

    Hey everyone! Just a few questions.
    1. My friend has his Mac set up so when you double click the top of a window, it minimizes. How do I set this up?
    2. Can I mak Safari (and other windows) fit the whole screen, so there isn't black bars on the sides?
    Thanks! I'll probably have more questions later.

    I will try to answer your questions:
    1. Go to system preference --> appearance --> then you will see an option to double click title bar to minimize.
    2. You can drag the window to maximize safari and it should "learn" this preference though I have a bookmark titled resize that I click on that maximizes my window. If you add a book mark and make the address this: javascript:self.moveTo(0,0);self.resizeTo(screen.availWidth,screen.availHeight) ;

  • 3 Questions from a new Blackberry convert

    Hello! I'm a PocketPC user turned BB owner and I dove in with the 8900.
    I just have a few usability questions and I'm hoping you can help...
    1. Is there a way to have notifications of new SMS, email, and IM messages pop up? I get the tiny icon at the top, but I have to back out of whatever I'm doing, go into the appropriate app, and guess where the message is. I saw a couple of apps on Handango that might do this, but they don't seem to work with IMs, which is the worst of the all. Any suggestions? (I'm spoiled by my multitasking PPC.)
    2. Can I change the icons that appear on the first screen? I have two email accounts so I have the messages thing, one email, the other email, then contacts, calendar and browser. The second email pushed the Media icon off. Is this customizable?
    3. This is a biggie for me: When I create an event in the calendar, I know that I can set the reminder for whatever I want. And I found the option to set the default snooze time when the event pops up. But here's the thing: there are some events that I want to warn myself about 3 days in advance, then snooze til the next day, and others (like picking up a kid, for instance) that I want to have pop up 30 minutes before and snooze for 15 minutes. As far as I can tell though, if I want to snooze for any amount of time other than the default, I have to open the event itself and change the reminder time. Is there any other way?
    Thank you so much for your insights!
    ~emily

    Hi and welcome
    1. I recomend you to solve this problem with two programms: BerryBuzz and Aerize Email
    2. Press the Menu button (left of the trackball), go to the icon you like to move, press the menu button again, choose Move and move the icon in the very first row. On this way you will get it on the homescreen.
    3. I think, you cannot set different times for snooze and popup a calendar event, popup and snooze happens in the same time (f.e. 15 min, 30 min, x day etc before the event). If you want tohave different notification for each event, you must change itfor every event separately.

  • A few questions from a new tech...

    It is based on the conversion process of a Cisco 6500 Series switch (WS-Sup720-3B release) w/MSFC3 from a hybrid mode (CatOS/IOS) over to a native mode. I've found a few conversion processes online however, I do not know which process is the best to use (as some of them seem outdated) and detailed enough:
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/12031-catos-ios-conversion-6500k.html
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/70273-70273.html
    http://www.ciscopress.com/articles/article.asp?p=102093&seqNum=5
    Also, another question that I have is about the correct, most up-to-date software. Whenever I use the Cisco software download navigator to search for an applicable image, I see different images based on various network requirements. Are these images applicable to this process? 
    https://software.cisco.com/download/release.html?mdfid=280829702&flowid=20135&softwareid=280805680&release=15.1.2-SY4a&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Any help would be very much appreciated.

    It depends on how complicated your configuration is.
    When I did this a long time ago I just did it by hand ie. I didn't use a conversion tool I just created a new configuration in a text editor and then copied in the new configuration.
    A lot of the commands in a configuration are defaults and you don't necessarily need to replicate them because you will get a new set of defaults when you convert.
    If you have a lot of extra configuration eg. QOS then it may be worth using one. It really depends on how well you know what your switch is currently doing.
    In terms of IOS image key things are -
    1) feature set ie. you need a feature set that supports all the things you are currently doing
    2) memory on your supervisor and whether you have enough
    3) module support ie. you need to check the release notes for each release because they may not support all your existing modules
    Jon

Maybe you are looking for

  • Regarding LOV's in Crystal Reports- Business View

    Post Author: crystalappu CA Forum: General Hi All, I have developed a Business View for our crystal reports, We have like two levels of cascading prompting. In which the user can select ALL option in drop down LOV's in second level. I have added an '

  • Missing DTPs, transformations of FI-CA & IS-U CCS into BI Standard Content

    BI Experts, I'm a basis guy trying to do some research for our BI team.  We are starting an IS-U CCS implementation (on top of existing/running SAP system) and have ECC6.0 EHP3 with IS-U activated in back-end.  The BW system is connected to this ECC

  • Tables Disappeared???

    I have a problem... I have 10g installed and have created a database of music with BLOB (mp3 files). The table has 1204 rows in it, making it a pretty large table. I got the bright idea to create another table using the unique column and the blob col

  • Channel stopped by administrative task.

    Hi dear experts, I got following error in message: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messag

  • Failind AND step of process chain

    Hi all I am facing problem with AND step in one process chain. AND step is failing as soon as chain is triggered. All the proceses before AND are executing properly with GREEN Status. "This AND process is not waiting for event RSPROCESS, parameter 4B


HashFlare