Some question regarding requirements in context of SAP XI

Hello!
I have few questions regarding Relational Database,  Network Archtecture and Platform Support requirements in context of SAP XI. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
<b>a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools?  If not, please explain the databases and tools supported (Yes/No)
b) database accept binary-large-objects (BLOBs) and  be referenced via the relational engine (Yes/No)
c) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
e) Software supported on OS clustered servers  (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)</b>
Thank you very much!
Regards
A. Henke

Hi Axel,
I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
regards
Barthez

Similar Messages

  • Few questions regarding requirements in context of SAP products

    Hello!
    I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
    a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
    b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
    c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
    d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
    d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
    e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
    Thank you!
    Regards
    A. Henke

    Hi Axel,
    I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
    regards
    Barthez

  • Some questions regarding CO-PA

    Hello Experts,
    I have some questions regarding de COPA module:
    1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
    2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
    3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
    Thnak you for your support!
    Leandro.

    Hi,
    a) VKOA transaction
    b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
    c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
    Regards,
    Eli

  • I have some questions regarding setting up a software RAID 0 on a Mac Pro

    I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
    These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
    A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
    The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
    Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
    It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
    My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
    I should be most grateful to receive advice regarding the following questions:
    QUESTION 1:
    I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
    If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
    Or would I have to reinstall the OS, applications and software again?
    I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
    QUESTION 2:
    I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
    Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
    Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
    QUESTION 3:
    Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
    Or would this not be of any use anyway, in the event of a single drive failure?
    QUESTION 4:
    Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
    QUESTION 5:
    If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
    Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

    Well said.
    Steps to set up RAID
    Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
    1. Open Disk Utility (/Applications/Utilities).
    2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
    3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
    4. Name the RAID set.
    5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
    6. Click Create.
    Recovering from a hard drive failure on a mirrored array
    1. Open Disk Utility in (/Applications/Utilities).
    2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
    3. If an issue with the disk is indicated, click Rebuild.
    4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
    5. Repeat steps 1 and 2.
    6. Drag the icon of the new disk on top of that of the removed disk.
    7. Click Rebuild.
    http://support.apple.com/kb/HT2559
    Drive A + B = VOLUME ONE
    Drive C + D = VOLUME TWO
    What you put on those volumes is of course up to you and easy to do.
    A system really only needs to be backed up "as needed" like before you add or update or install anything.
    /Users can be backed up hourly, daily, weekly schedule
    Media files as needed.
    Things that hurt performance:
    Page outs
    Spotlight - disable this for boot drive and 'scratch'
    SCRATCH: Temporary space; erased between projects and steps.
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    (normally I'd link to Wikipedia but I can't load right now)
    Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
    To help understand and configure your 2009 Nehalem Mac Pro:
    http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
    http://macperformanceguide.com/
    http://www.macgurus.com/guides/storageaccelguide.php
    http://www.macintouch.com/readerreports/harddrives/index.html
    http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
    http://kb2.adobe.com/cps/404/kb404440.html

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • Some questions regarding ESB system.

    Hi all,
    I've used my ESB system for a few months now, so I thought it would be interesting to look at what's going on in my database schema created by my esb system (oraesb). This led to some questions (and raising eyebrows), I hope some of you soa-experts might have an answer.
    * Is my system installed properly:
    I noticed that the oraesb schema created by running IRCA.zip installs only tables, views, topic queues and 1 procedure (create_queue). However, looking at the sql scripts in ${soaSuite_home}/integration/esb/sql/oracle there are far more stored procedures defined. Is it normal cq. okay that these objects are not installed or is my esb system faulty?
    * No constraints or indices:
    My system is yet very small, so it is still performing good/fast. I imagine that when the esb system is going further, performance and locking becomes an issue due to lack of indices on foreign key columns and primary/foreign constraints.
    * Only small part of schema used:
    When browsing through the tables of the oraesb user I notice that only a few tables are filled with data. For example all "Slide Tables" (this is the name given to these group tables in file ${soaSuite_home}/integration/esb/sql/oracle/wfeventc.sql) are empty. Is this normal? What kind of processes should enter data in these tables? What is the use of the "Slide tables"?
    * AQ-tables not being used:
    My esb system has five aq-queue tables (esb topics), but they are never used! I recall another thread on this forum about these queue tables growing enormous in size. I guess there must be a sort of switch somewhere to switch between jms-queue's and aq-queue's? Can anyone please explain how switch on the aq-queue's or point me to the proper documentation. I must have overlooked this in the documentation.
    Kind regards,
    Happy new year,
    H

    When your podcast is accepted you should receive an email telling you this and giving the URL for its page in the iTunes Store. The string of numbers at the end is the ID number.
    It usually takes somewhat longer for a new podcast to appear in the search results. Once you can find it by searching on the title, you can get the Store page URL, if you still don't know it, by control-clicking on the podcast image (or where it should be) and choosing 'Copy Podcast URL'.
    You may find this page helpful in giving you basic information about podcasting:
    http://www.wilmut.org.uk/pc

  • Some question regarding time evaluation

    Hello,
    I have two questions regarding time evaluation:
    1. Is it possible (if yes, how) to still include a employee in time evaluation even if this employee is inactive (status P0000-STAT2 = 0). We need this in order to calculate weeks of not working (this has to be calculated). I know that for payroll this is possible wih a setting in infotype 0003.
    2. Is it possible (and how) to read data back from payroll into time. For example in payroll you export something to ZL table, can you then pick this up in time evaluation schema, as there is also ZL table. Or is there another way to do this?
    Thanks for you answers,
    Liesbeth

    hi Schrage
    Why you want to evaluate the time for inactive person.
    If you want you can do.
    Process :
    First of all you have to group your employees. and sub groups.( for inactive emp)
    Assign the employee sub group grouping for PCR in Basic Pay ( IMG ).
    Then come to Time Evaluation Schema. Put the Day grouping nn nn nn nn in the Parameters. and run the time evaluation. You will get the output in DZL table.
    For the above process you need to configure the T510S table.
    Yes you can read the payroll into time.
    the same concept will run in both of the modules.
    the output should appear in the ZL table only.
    Here the concept is.....Some companies, they will not use the payroll wage types. only they will use the time wage types.. these wage types has to be configure in the T510S. and we have to do the wage type copying from the part of time management only if they are not using the payroll. So either in Payroll or in Time management the evaluation of time willbe the same.
    Cheers
    Vijai

  • Some questions regarding x-fi pro 5.1

    Hi guys, i have some questions that i cant seem to find answers to that i hope someone can help me with.
    I recently bought an X-FI Pro 5.1 USB sound blaster.
    I have it plugged into my computer, and i have an optical cable from its spdif output connected to my wireless surround headphones (sony ds6500). These headphones can accept up to 7.1 signals in dolby digital and DTS and they "emulate" a surround through its 2 speaker elements.
    As a reference i can add that i have tried these plugged directly into my PS3 system and the 5.1 DD signal i get is really good! You can clearly hear what is behind and what is in front of you!
    I have installed the latest drivers and all available software from creatives website.
    1:
    And when reading about this card i often see people refering to the diffrent modes available (entertainment, game and cinema). But nowhere in any software can i find any option to change my mode, which seems to be stuck in entertainment. Whats up with this?
    2. I am getting a DD signal to the headphones, they indicate this so the system has the basics properly set up.
    But the biggest gripe i cant figure out is why it send the same audio from the FRONT and REAR.
    That is, i can hear no diffrence between the signal that is suppose to be the front speaker and the one that is suppose to be the rear speaker. What am i missing?
    3. I have about .5 sec delay of the audio when playing a game for instance, can this be solved?
    Please ask if you need any more info to help me solve this.
    Thanks in advance

    Okay, btw. you mixed point 1 with 2 i'll stay at original numbering
    1. [2.]) Well, i must confess the manual from creative isn't working correct (while the ones for other creative card work, just checked), it just shows the menue but the browsing page shows an error (if the one that is packed with your software is working and you could upload it that would help a lot). So i just searched for modes and found one so i thought it would have them. But now i took a deeper look and there is just the Entertainment Mode in Creative Software Suite. Also the Quick Start Guide shows there is not much software available, so i guess this card simply doesn't have it.
    2. [1.]) That should work either you can try 2/2.1 or Headphone (in X-FI Console and Windows Audio Console) as the Headphone is Stereo only with kind of virtual Surround like CMSS does. Btw. on your first post you wrote: kind of nice DD you hear. Thats wrong AFAIK. You hear Sonys Virtual Technology or maybe (as other Surround Headsets feature that) Dolby Headphone. Anyway it might be some of the creative options mix up with Sony way of surround sound. So did you try enable/deable CMSS (3D/Headphone/Virtual etc)? Else it just can be the configuration of speakers in Windows: Please note that the channel settings in Windows® Vista/7 can be set in Windows Audio Console, not in the X-Fi Audio Console. (Right click the speaker icon at the system tray, Select playback device, “Speakers”, Speaker Configures)
    3. Concerning the Delay: Under 'Creative audio control panel,' be certain that 'high speed' (2.0) is checked, and not 'full speed' (1.1) . Else you might need to switch back to Vista or XP drivers that obveausly helped some people to solve the delay problem. Or you try newest PAX drivers eg. wait on Danial_K's new X-Fi Pack (what i believe will be best bet as you also get new functions). I know creative drivers are a bunch of ****** and if you compare to AuzenTech oder ASUS f.e. the hardware isn't better too. Never going to buy creative again.

  • Some questions regarding the iPhone app

    Hi, I have an iPhone 6 Plus using the app version as I don't own a computer, and am currently on my second day of the 7-day Premium Free Trial period. I just have some questions I'd like to ask about it:
    1) I have an extremely large music library, and I'm pleased to see that Spotify has most of what I own. However, for the past several hours it refuses to let me add any new artists/albums/songs to my lists, and when a new album is added, it will vanish from the artist list the next time I turn on my phone. At the same time, I actually tried deleting one of my artists from my Artist list, only to have to reappear the same way. Is this an error, or is there a limit of how much content you can add to your lists?
    2) What happens when the 7-day trial period is over? Does it just start automatically billing me, or does it give the option of opting out?
    Thanks for your help in advance. :)

    Hello , Welcome to the community! :)
    I am unaware of a bug like that, is their any chance that it could be fixed by now
    If you gave payment info/subscribed via itunes then yes it will start billing you, you stop this by folowing these steps:
    Canceling your subscription reverts your account to the Free level.
    Go to the subscription page. (Note: If you don’t know your password, go here to reset it.)
    Under Subscription and payment, click cancel your subscription.
    Select a reason (select Other reasons if you're canceling for a promotion). Click CONTINUE.
    Click CANCEL MY SUBSCRIPTION.
    Enter your password in the password field. Click CANCEL SPOTIFY PREMIUM SUBSCRIPTION.
    Your subscription page now shows the date you will revert to our Free ad-based service. We hope you decide to upgrade again!
    Note: If you subscribed through any other company than Spotify, you need to contact that company to cancel. If your subscription is through iTunes, please see Apple's instructions for canceling.
    I hope this helped :)

  • Some questions regarding SAP Content Server / Knowledge Warehouse

    Hi,
    we are thinking about SAP Knowledge Warehouse which needs the SAP Content Server.
    Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity? The Conent Server needs his own database instance. Is it possible to add it to the actually installed Maxdb for the  Solution Manager?
    What is the actual version of the Content Server 6.30 or 6.40? Is there no 7.0? What about the future of the Content Server?
    We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine? What about the database? Can I use the already installed DB of solution manager?
    Thanks ahead
    Bernd
    Edited by: Bernd Speckmann on Apr 26, 2010 10:55 AM

    Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity?
    If you have enougth resourses why not?
    The Conent Server needs his own database instance.
    This is are not true, you can install content server without MAX DB.
    Is it possible to add it to the actually installed Maxdb for the Solution Manager?
    Again why not, if you have correct max db version per PAM for content server (you need 2 DB instance second are for cache server) check pam for NW 7.0 (the PDF document) you find information about content server requirements here and in page --> Database components on same NW 7.0 PAM. 
    What is the actual version of the Content Server 6.30 or 6.40?
    6.40 are last version,
    We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine?
    Your OS are ? I'm install cont server 6.40 on system where NW 7.0 are installed without problem, do not know about NW EHP1 .... Good backup are start point .....
    Regards.

  • Some Questions regarding ABAP

    Hi All,
    1. What is the exact diffrence Between Diffrent Update Modes in BDC Process.
    What is the Diffrence B/N Synchronous[S] & Asynchronous[A] processing in Update mode. Ans Also what is the purpose of Local[L] Mode.
    2. What is meant by work processes in ABAP.
    3. In SAP Script in NACE when we connect Print Program[SE38] & Layout Set[SE71] there will be some common routine B/N them like ENTRY.
    WHat it actually does - FORM ENTRY.
                            ....ENDFORM.
    4. In ALV Output i want to change the color of particular row dynamically how can i change the same.
    Suppose i am having one row with one field (-)Negative Value that should be displayed in diffrent color, If Positive value need to be in diffrent color, Zero value need to be in diff color. how can i achieve this dynamically.
    5. I Have one issue in BDC I am running a CALL Transaction Method for one BDC program.
    In that if the process is successful or not i am creating a error Log in SM35.
    If the above CALL Transaction for BDC is successful i am updating 2 Z-Tables and if it unsuccessful i am creating a session[Error Log] in SM35 through Session Method.
    Now what i want is when if above CALL Transaction fails then Z-Tables will not be updated.
    Then user will go to SM35 and modify the log and Re-Process BDC from SM35. But here Z-Tables will not get updated though now process will run successfully.
    Means if the BDC fails, these updates to the Z-tables never happen even if we re-process the BDC & then we have an out of Sync condition.
    Can anybody give the solutions for the above issues.
    Thanks in advance.
    Thanks & Regards,
    Prasad.

    1.
    The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION ... IN UPDATE TASK. This section describes various ways of updating the database.
    A program can send an update request using COMMIT WORK
    ·        To the update work process, where it is processed asynchronously. The program does not wait for the work process to finish the update (Asynchronous Update).
    ·        For asynchronous processing in two steps (Updating Asynchronously in Steps.)
    ·        To the update work process, where it is processed synchronously. The program waits for the work process to finish the update (Synchronous Update).
    ·        To its own work process locally. In this case, of course, the program has to wait until the update is finished (Local Update.)
    http://help.sap.com/saphelp_nw04s/helpdata/en/41/7af4d7a79e11d1950f0000e82de14a/frameset.htm
    Local Update : In a local update, the update program is run by the same work process that processed the request. The dialog user has to wait for the update to finish before entering further data. This kind of update is useful when you want to reduce the amount of access to the database. The disadvantage of local updates is their parallel nature. The updates can be processed by many different work processes, unlike asynchronous or synchronous update, where the update is serialized due to the fact that there are fewer update work processes (and maybe only one).
    http://help.sap.com/saphelp_nw04s/helpdata/en/41/7af4d7a79e11d1950f0000e82de14a/frameset.htm
    2.
    Work process is a process that as a component of an application server executes an ABAP application.
    To process SAP requests from several front ends, an SAP application server has a dispatcher, which collects the requests and forwards them to work processes for execution.
    There are the following types of work process:
    Dialog
    For executing dialog programs
    Update, Upd2
    For asynchronous database updates
    Background (batch)
    For executing background jobs
    Enqueue
    For executing lock operations
    Spool
    For print formatting
    Work processes can be assigned to dedicated application servers. In the service overview (SM51), you can see which work process types are provided by the individual servers.
    Each work process is logged onto the database system as a user for the entire runtime of the SAP system.
    Each work process is assigned for the duration of a dialog step to an ABAP program.
    Check this link too.
    http://help.sap.com/saphelp_bw30b/helpdata/en/69/c24e104ba111d189750000e8322d00/frameset.htm
    3. Form entry in the driver program is the main sub-routine from which the execution of the driver program starts.
    You have to mention the from entry sub-routine in the NACE transaction where you will mention the program name, from name or in the TNAPR table
    The form ENTRY routine is present in your print program.
    In this routine you write your whole code of print program(like opening of your form, trigerring your form and closing your form and fetching data) and this routine is dynamically called by RSNAST00 program
    4. It is possible to paint some cells, rows, and columns through the ALV Grid control. Basically, with no additional effort, if you set a column to be a key column it is automatically colored. To paint we have the following procedures. 
    Cxyz
    C.6.1. Coloring an Entire Column
    To make an entire column be painted with the color you want, you can use the “emphasize” option of the field catalog. Simply assign a color code to this field of the row added for your column. Color codes are constructed as follows:
    Color numbers are:
    x      Color      Intended for
    1      gray-blue      headers
    2      light gray      list bodies
    3      yellow      totals
    4      blue-green      key columns
    5      green      positive threshold value
    6      red      negative threshold value
    7      orange      Control levels
    The “key setting” made via the field “key” of the field catalog overrides this setting. So if you want this color to be colored different than the key color, you should set the “key” field to space while generating the field catalog. However, then there may be some side effects on column orders. You can set the column order as you want at the frontend. But if this is not suitable for you, then unset all key settings and do all coloring and ordering as you want. Be careful that the function module generating the field catalog will always set the key properties of key fields.
    C.6.2. Coloring an Entire Row
    Coloring a row is a bit (really a bit) more complicated. To enable row coloring, you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row. So, let’s modify declaration of our list data table “gt_list”.
    Code Part 13 – Adding the field that will contain row color data
    As you guess, you should fill the color code to this field. Its format will be the same as explained before at section C.6.3. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by
    1/0:intensifiedon/off
    1/0:inverseon/off
    Colornumbers
    *--- Internal table holding list data
    DATA BEGIN OF gt_list OCCURS 0 .
    INCLUDE STRUCTURE SFLIGHT .
    DATA rowcolor(4) TYPE c .
    DATA END OF gt_list . 
    passing the name of the field containing color codes to the field “INFO_FNAME” of the layout structure.
    e.g.
    ps_layout-info_fname = . “e.g. ‘ROWCOLOR’
    You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
    You can color an entire row as described in the next section. However, this method is less time consuming.
    C.6.3. Coloring Individual Cells
    This is the last point about coloring procedures for the ALV Grid. The procedure is similar to coloring an entire row. However, since an individual cell can be addressed with two parameters we will need something more. What is meant by “more” is a table type structure to be included into the structure of the list data table. It seems strange, because including it will make our list data structure deep. But anyhow ALV Grid control handles this.
    The structure that should be included must be of type “LVC_T_SCOL”. If you want to color the entire row, this inner table should contain only one row with field “fname” is set to space, some color value at field “col”, “0” or “1” at fields “int” (intensified) and “inv” (inverse).
    If you want to color individual cells, then for each cell column, append a line to this inner table which also contains the column name at field “fname”. It is obvious that you can color an entire column by filling this inner table with a row for that column for each row in the list data table. But, it is also obvious that, this will be more time consuming than the method at section C.6.1.
    Again key field coloring will override your settings. That’s why, we have another field in this inner table called “nokeycol”. For each field represented in the inner table, set this field to ‘X’ to prevent overriding of key color settings.
    In this procedure, again we must tell the control the name of the inner table containing color data. The field “CTAB_FNAME” of the layout structure is used for this purpose.
    Code Part 14 – Adding inner table that will contain cell color data
    Code Part 15 – A sample code to make the cell at row 5 and column ‘SEATSOCC’ colored
    *--- Internal table holding list data
    DATA BEGIN OF gt_list OCCURS 0 .
    INCLUDE STRUCTURE SFLIGHT .
    DATA rowcolor(4) TYPE c .
    DATA cellcolors TYPE lvc_t_scol .
    DATA END OF gt_list .
    DATA ls_cellcolor TYPE lvc_s_scol .
    READ TABLE gt_list INDEX 5 .
    ls_cellcolor-fname = 'SEATSOCC' .
    ls_cellcolor-color-col = '7' .
    ls_cellcolor-color-int = '1' .
    APPEND ls_cellcolor TO gt_list-cellcolors .
    MODIFY gt_list INDEX 5 . 
    what happens if all these three procedures applied for coloring at the same time. The answer is given as there is a priority among them. The priority order is: cell setting - row setting - column setting. Beside these, key field setting must be handled.
    Cheers,
    Susmitha.
    Message was edited by: Susmitha Thomas
    Message was edited by: Susmitha Thomas

  • Some questions regarding to Webdynpro.

    Could you please help me with the following questions?
    1. Are there APIs to access URL parameters.(Webdynpro ABAP)
    2. Is it possible to call functions from Webdypro for Java in Webdypro for ABAP?
    Additional question.
    If you know, please let me know if there are any risks or limitation of Webdypron for ABAP?
    Thanks, kind regards
    Changzhao, Yu

    Hi Chang,
          Not a answers but see this thread once:
    WD for Java vs WD for ABAP
    Regards, Suresh KB

  • Vhcs, some questions regarding Directories

    Hello,
    So after being a while with Arch, it's time now to build VHCS for it, But i need an answer to a simple question:
    VHCS usually live in /var/www/vhcs2 and the websites live in /var/www/virtual that's how VHCS construct them, but that is not at all Arch way, so my question is, Do i change the folders ? if yes where would i throw them?, /opt/vhcs2 and /home/httpd/www/virtual ?? it is much better to keep them in place since i'd have to patch some considerable amount of files to change default folders but it is not impossible, so give me ur suggestions please!
    Thx

    I was planning to start digging into VHCS this week, but currently I have not much time. I'm glad to hear that you are going to make PKGBUILD for VHCS too.
    I think it is better to start from default dir layout and proftpd.conf.vhcs + instructions for user. Then when VHCS will be working OK - it may be improved. Working with real VHCS on Arch should reveal all pros and cons of starting PKGBUILD.

  • Some questions regarding SSLSocket

    Hi,
    I'm trying to write application (3 servers and 1 client) that will be using ssl.
    I've got a question - is one keystore enough for 3 server and 1 client and will it provied secure conncetions for all (for example server1<->server2, server3<->client, client<->server2 etc), or should I create one keystore for each server and if so, how can I launch client with all 3 keystores.
    //EDIT
    I'm really sorry I just realized that I posted in the wrong category, but it seems that I cannot delete this topic.
    Edited by: 801063 on 2010-10-09 15:07
    Edited by: 801063 on 2010-10-09 15:23

    EJP wrote:
    A truststore comes with the JDK and this is sufficient unless you are using self-signed certs, which you shouldn't. Your statement is accurate, except for the part I've underlined, EJP. Here's why:
    The truststore, as you indicated, is a file that maintains the digital certificates of Certification Authorities (CA) that, typically, issue certificates to requesters for monetary compensation. Their value proposition is that they undertake a verification and certification process of the SSL server, at a lower cost than what you might incur if you had to perform the verification on your own. There is no additional security they provide, technically, over self-signed SSL certificates; all their value is, supposedly, in the under-writing of the risk of dealing with an unknown SSL server on the internet (but that's very debatable given the number of phishing attacks that succeed on the internet despite the use of SSL server certificates issued by "trusted" third-party CAs).
    There are many business use-cases where SSL Server certificates need to be used, purely, for internal use, where the SSL client and server are internal applications and never visible outside the closed network of the business (such as an e-commerce application running on Glassfish communicating with a Database server to store transactions). In such a situation, since the client and server are completely known and trusted between each other, the value of an external third-party CA-issued SSL server certificate is superfluous. By and large, this is a very valid business reason for using self-signed SSL certificates, or certificates issued out of a "closed PKI".
    In another use-case, such as the one we encounter in our company's business, the SSL server certificate of our Encryption & Key Management (EKM) appliance is deliberately setup as a unique self-signed certificate for each customer, to throw up a speed-bump to anyone who's randomly doing port-scans on the internal network (they're never visible on the internet for security reasons). While this is not truly a deterrent, to people who understand SSL, the self-signed certificate throws up a "PKIX validation error" if that someone tries to use an SSL client against the server, thus slowing them down a little. Besides, it also saves our customers money because they're not paying a third-party CA for an unnecessary SSL server certificate for internal use.
    My apologies for "hijacking" this thread for a side-issue, but I felt it was important for the forum to understand that not all self-signed SSL certificates are bad or insecure; the context of their use determines the trust you may place in such certificates - this is little understood in our industry Thanks for your indulgence.
    Arshad Noor
    StrongAuth, Inc.

Maybe you are looking for

  • Error when displaying a pdf file in an iFrame

    Hi, I would like to display a pdf file in my Java Web Dynpro application. I am using an iFrame element. The code I used is: // test if the file exists if( path != null)      path = "D:\\Echanges\\Facture\\" + path + ".pdf"; if (isFile(path)) // test

  • Kernel panic with my mac pro

    Hi guys, First of all let me say hello to everyone, this is my first post in here. I kindly ask your help before sending my MP to apple support. I have to tell you as many other somewhere I installed third party ram on my machine from OWC 4x2gb. But

  • Web Service Client using computer name instead of IP

    Hi, I've built a small EJB web service with a JAVA application deployed via JAVA Web Start for the client. I testing the application on our LAN and it worked perfectly on one machine. I tested it on another machine and I get an erro along the lines o

  • Dynamic Cascading prompt in Webi

    Is there a way either at Webi/Universe level to create dynamic cascading prompt in webi based on selection from first filter object. e.g. two objects, Region and Office. In webi, Region is the first filter, Office is the second. After user selects a

  • Primitive data types as a sequence of bytes

    Does anyone have any experience of converting between primitive data types and sequences (i.e. arrays) of bytes? In particular I want to transmit primitive data types over a socket connection by writing a sequence of bytes. Thanks in advance.