Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
Edited by: Chaitu on Mar 17, 2013 8:57 AM

Chaitu wrote:
If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
Hi Chaitu,
patchset(10.1.2.3) is applicable for the following releases only:
Oracle Application Server 10g Release 2 (10.1.2.0.0)
Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
Oracle Application Server 10g Release 2 (10.1.2.0.2)
Oracle Application Server Forms and Reports Services (10.1.2.0.2)
Oracle Application Server Portal 10g Release 2 (10.1.4)
Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
Oracle Developer Suite 10g (10.1.2.0.2)
Oracle Business Intelligence 10g Release 2 (10.1.2)
Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
Hope this helps
Hamid
* batter discuss at {forum:id=82} forum.

Similar Messages

Some reports are not displayed in Windows Vista and IE9

Hi,
as the title says, I had a problem with Windows Vista.
I'm using CR2008, VS2008, and .NET 3.5 to develop web form.
So, in every computer (WXP, W7) with IE9 works fine, but in Win Vista, some reports are displaying in a wrong way.
You can see a screenshot here
http://dl.dropbox.com/u/27544299/bad%20cr.PNG
SP2 installed.
Any suggestion??
Thanks.

CR 2008 SP2 does not support IE 9.
Upgrade to [CR 2008 SP5.|http://www.sdn.sap.com/irj/boc/support?rid=/webcontent/uuid/10e38d93-7f07-2d10-beae-e739182f8ada]
- Bhushan.

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Updated to firefox 8. now some favicons are not displaying, either on site or in bookmarks.

I am running Win 7 Ultimate. After updating to Firefox 8 some favicons are not displaying, either on websites or in my bookmarks.
Thank you.

I have the same problem, but note: the problem is NOT that the dotted-line box is showing up per se; it's that favicons that used to appear on bookmarks no longer do so, even though a valid favicon exists for that Web site, and even though I visit the Web site again by clicking on that link and even though about:config confirms that favicons should be showing up.
In other words, favicons are not being saved or refreshed; they are all turning to the dotted box icon and staying that way, no matter what.
To repeat, the dotted-line icon is not the problem; it's the loss of favicons that appeared properly in FF7 and the failure in FF8 to update favicons after clicking on links.
In a possibly related bug, the Adblock Plus icon no longer appears in the Navigation Toolbar, even though about:config confirms that it should and even though the option to display in the Navigation Bar is checked and even though an icon does appear in the Status Bar and even though the add-on is installed and otherwise working normally.

Some reports are not loading

Hi,
i'm working with reports 6i. i use run_product built-in in a particular form. while running a particular report from this form, some reports are generated, some are not loading.. any general issues!!
pls help me.

Hi Ammad,
The details upto the margin of the main section are displaying. But the body of the main section is not displaying. this is happening when i give some particular items.
when i give such items directly through report builder, its working..
but while through forms, the body part is not getting displayed.
pls help me.
Edited by: user13106173 on Dec 2, 2010 8:38 PM

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

Some contraints are not displayed in modeler

Hello,
I imported a set of tables into the modeler that is in Jdeveloper. There are some foreign key constraints that are not being displayed with a line although the constraint is there if I look at the table's properties.

Hello,
Answers to your questions:
-Oracle DB: 9.2.0.1.0
-Server OS: Win 2000/Server, updated all service packs
-Jdeveloper: 10g == 9.0.5.1 (build 1605)
-I use the import wizard to get all of the tables imported to a off-line set at the same time.
-Yes, the tables were all imported at the same time.
The schema is propietry, so I can't not release it. It would take me quite bit of effort to remove the propietry information, so I don't think I'll be able to provide the code. If I have free time in a week or so, I'll consider shrubbing it and sending it to you.
Anyways, here is a descrption ofthe behavior of Jdeveloper when the error ocurrs, a simple description of the DDL, and details on the constraints on the tables where the problem occurs:
1) I use the import wizard to get all of the tables imported to a off-line set at the same time. Sometimes a table will get imported without a tablename. Sometimes a blank line is in the list of table names, but all of the tables are there. When the blank line error occurs I get the problem with the missing relationship line in the diagram.
2) Create blank diagram.
3) Select all tables. Since there is a blank line in the list of table names, I have to use the control key to select all of the tables.
4) Drag all of the selected tables onto the diagram.
5) Only one relation is does not display in the diagram with a line although the details of the relation is there if I look in the properties for the table. The relationship that has the problem is a foreign key relationship from a table A to table B named PRE_SMD_FK that is listed below. Table A is different from other tables in the schema because it has a circle constraint which is also listed below.
DDL is about:
~40 tables
~20 in a star configuration
~19 tables linked in almost a chain
1 table has no relationships
ALTER TABLE B
ADD (CONSTRAINT SME_PK PRIMARY KEY
(ID))
ALTER TABLE B ADD (CONSTRAINT
SMD_STD_FK FOREIGN KEY
(SYSTEM_VERSION) REFERENCES C
(SYSTEM_VERSION) ON DELETE CASCADE)
ALTER TABLE A
ADD (CONSTRAINT P_PK PRIMARY KEY
(ID))
ALTER TABLE A ADD (CONSTRAINT
PRE_SMD_FK FOREIGN KEY
(ID) REFERENCES B
(ID) ON DELETE CASCADE)
ALTER TABLE A ADD (CONSTRAINT
P_P_FK FOREIGN KEY
(PARENT_ID) REFERENCES A
(ID) ON DELETE CASCADE)
ALTER TABLE A ADD (CONSTRAINT
P_P_FK FOREIGN KEY
(PARENT_ID) REFERENCES B
(ID) ON DELETE CASCADE)

Why after exporting PDF to Word some characters are not displaying accurately.

I exported a PDF to Word and it changed the case of some of the characters from upper case to lower case and even changed the font. In some areas the kerning is wonky too. What do I need to do differently?

Very likely you are not needing to change anything. Some variation in output can be found depending on the data structure of the file involved.
Will Adobe ExportPDF convert both text and formatting information?Adobe ExportPDF is capable of exporting high quality information, but the quality of your Word document depends on the quality of the PDF file you start with. For instance, if your PDF file was originally authored in Microsoft Word and converted to PDF using the PDF Maker functionality in Adobe Acrobat® software, your PDF file contains a rich set of information that can be captured by Adobe ExportPDF. This includes relative positioning of tables, images, and even multicolumn text, as well as page, paragraph, and font attributes. If your PDF file was originally authored using simpler PDF generation methods, such as “print to PDF” or “scan to PDF” options, Adobe ExportPDF will convert any recognizable text and then use sophisticated conversion intelligence to preserve as much of the page layout as possible.

Standard BI reports are not displayed in Web UI

Dear Experts,
I have a requirement to get a report on activities based on category, employee responsible and planned activities. So i have used standard report - 0TPLB_0SAL_DS01_Q0005_1 - Activities by category and assigned BI logical system and created logical link and assigned to Business role. I have loaded the data in BI successfully.
But, When I login to Sales professional role and click on Report Activities by category, i got "No application data found", then I clicked on Advance analysis from filter area, I can see standard key figures like Interaction log, e-mail, appt, task, overall result. But i am not using these standard key figures, I have customized my own Categories.
Is this causing the problem, if so how could i had my custom key figures. If this is not the issue, could please provide some light on how to get data in the report.
Your help is much appreciated and rewarded.
Thanks
Mahesh

HI Mahesh,
You already have answer in your question.
I can see standard key figures like Interaction log, e-mail, appt, task, overall result. But i am not using these standard key figures, I have customized my own Categories.
As you have you Zcategories, there is no data for the above mentioned categories.
From Query designer, search your query 0SAL_DS01_Q0005_1
In Filters you will find many restrictions.
and in the row/columns - KFs you will find the Categories which are standard.
You can create a Zquery based on these rows and create KFs for Zcategories.
Revert back if any more clarifications.

Why some song are not displayed on my iphone or my ipad?

hello everyone...
Yesterday i added a music album on my itunes library on my macbook... i went on store-->update itunes match and i supposed to find it on my iphone ( where itunes match is enabled ad well).
But there is not this album at all on my phone, so i created a playlist on my mac with only the album i miss and magically that one is correctly displayed on my iphone and i can even play the song... but if i go to week added no way to see this album...can someone help me out here
Thanks a lot

update: i forget to say that on the mac's library the album is listed as WEEK ADDED and all the other album of the week are there and are displayed correctly on the iphone.
If i go on music from the iphone and i search the artist i miss i correctly find it...
So the issue is just related to the playlist WEEK ADDED and MONTH ADDED..

CS-MARS Issue - Custom queries/reports are not displaying any data

I am trying to produce a report to identify which clients are TFTPing traffic to a particular host and then quantify the amount of data being transmitted. These statistics should be available via the Netflow data being exported to the CS-MARS System. However, the queries continuely produce nil results.

These release notes are for use with the Cisco Security Monitoring, Analysis, and Response System (CS-MARS), Version 4.1.1 running on either a Local Controller or on a Global Controller.
http://www.cisco.com/en/US/products/ps6241/prod_release_note09186a0080504531.html

Some fonts are not displayed correctly

We are developing an application where in the font for the whole application can be changed from a particular font dialog.the problem is that although it works fine for majority of the fonts, rectangular boxes are displayed for Impact, Marlett, Symbol, Webdings, wingdings font.
i am doing a
GraphicsEnvironment ge =GraphicsEnvironment.getLocalGraphicsEnvironment(); for getting the fonts and displaying it in a JList.Is there any way of suppressing these fonts from being displayed to the user ?

Yes these fonts have one feature - see http://developer.java.sun.com/developer/bugParade/bugs/4279855.html
so you can check them by next way :
     GraphicsEnvironment ge = GraphicsEnvironment.
getLocalGraphicsEnvironment();
     Font[] fonts = null;
     if (ge != null) {
          fonts = ge.getAllFonts();
     for (int i=0; i < fonts.length; i++) {
          fonts.canDisplay('a');

Reports are not displaying

Hi BW Experts,
I am trying to execute SD reports. But iam getting the message "No Applicable data Found".
But data is there in Infocube and Reporting Flag is also there.
Recently we added some fields in Infocube and Transported all changes from Development to Production.
Then we deleted previous data from Infocube and we loaded data again.
What may be the problem?
Can anyone tell me the solution?
Thanks & Regards
Anjali

Hi,
R u sure that the data is available in cube and the reporting icon also enabled?
Check whether u have any restrictions, exits in the querry?
If u find any restrictions then check the data in the cube with those restrictions.
Khaja

In Mac OS X Mail some emails are not displaying the correct font size.

I have set my Mail to display email messages (Inbox) to Courier 13 point (easy to read) and most messages are displayed that way, however I often get emails that are displayed in unreadably small and often colored type. I don't understand why this is ... could someone explain how to fix this? Thanx.

The email was probably sent from Outlook as RTF or HTML. You can tell Mail to display those as plain text as well by opening Terminal and typing this command (quit Mail first):
defaults write com.apple.mail PreferPlainText -bool TRUE
See http://www.hawkwings.net/2005/09/27/viewing-html-messages-in-apple-mail/ for more information.

Having problems with text, some images are not displaying properly

when opening an image( as screenshot) in firefox support forum, the close button is not showing instead a number code is shown in a box

That is a font problem.<br />
It looks that the font that is used doesn't have a glyph for this character: &#x2716; - ✖
*http://www.alanwood.net/unicode/dingbats.html
You can consider to install the DejaVu font.
*http://www.alanwood.net/unicode/fonts.html
*http://dejavu.sourceforge.net/wiki/index.php/Main_Page
I see more little boxes with a hex code that indicate that the used font is missing those glyphs and Firefox doesn't seem to be looking for them in another font as would normally happen.

Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

Similar Messages

Maybe you are looking for