Some usage rights have been applied pop-up

When I edit a form in livecycle I often get the pop-up:
I just click Yes and continue on, however; a coworker of mine is using fields from the forms to populate into an application they have built and cannot get passed the pop-up. Is there any way to disable the pop-up or something I can set to stop it? Thank you for any information you can provide.

You get the pop-up because the Reader Extensions for saving the PDF is enabled...
They give you this pop-up because if there is any data entered in the PDF, it will be lost because LiveCycle can only modify the template of the PDF Form.
Which means the initial Form as it is created. Once you enable Reader Extensions you MUST remove the usage rights to be able to modify the form...
If you want to keep the data inside the form, you should keep a copy on the side to be able to re-enter the data inside the form once it is modified in LiveCycle.

Similar Messages

  • Firefox has spontaneously decided not to show the task bar at the bottom of the screen, and some menu bars have been messed up. How can I fix this?

    My Firefox has spontaneously (apparently) decided not to show the task bar at the bottom of the screen (the margin is there, but it is blank), and some menu bars have been messed up. Perhaps the most annoying aspect of these changes is the fact that I have to use alt-tab to move from a Firefox session to another session.
    I can find no way to fix these problems. Can you help? Am I going to have to uninstall and re-install Firefox in order to get back to the default settings? If so, is there any way to preserve my bookmarks?

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
    If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
    *https://support.mozilla.org/kb/how-to-use-full-screen
    See also:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    *https://support.mozilla.org/kb/Toolbar+keeps+resetting

  • Row cannot be located for updating. Some values may have been changed...

    Hello,
    I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
    I've a problem during insert of a record using recordset method (AddNew).
    The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
    I know that problem is caused by a Before Insert trigger that I CANNOT change.
    Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
    I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
    I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
    I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
    Other important info:
    Cursor = adUseClient (and i cannot adUseServer)
    Provider= MSDAORA (version 9.2...)
    Oracle server = 9.1
    Trigger causing problem = BEFORE INSERT (for each row)
    Thanks in advance
    Luigi

    Hello,
    I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
    I've a problem during insert of a record using recordset method (AddNew).
    The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
    I know that problem is caused by a Before Insert trigger that I CANNOT change.
    Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
    I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
    I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
    I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
    Other important info:
    Cursor = adUseClient (and i cannot adUseServer)
    Provider= MSDAORA (version 9.2...)
    Oracle server = 9.1
    Trigger causing problem = BEFORE INSERT (for each row)
    Thanks in advance
    Luigi

  • How can I check the patch I have been apply?

    Dear all:
    How can I check the patch I have been apply in the Financial Management?Does it have the record in the server? or has the SQL to query?
    Regards
    Terry

    Hi Terry;
    In addition to Hussein Sawwan great post, please also check those notes-recomendation on
    how to check MINIPACK 11I.AD.I.5 ?
    Regard
    Helios

  • Logging off - because ZENWorks policies have been applied

    We use Windows 2008 terminal servers with ZCM 11.1.
    One of our user has a message again and again (1-2 times a day):
    "ZENWorks - Logging off
    ZENWorks policies have been applied on the device which require a relogin to take affect. Save your work before relogin occurs."
    The policies didn't change nowadays, and just one user gets the message.
    If this user logs in another terminal server he gets same message there.
    The zmd-messages.log:
    [BundleManager] [BUNDLE.MachineShuttingDown] [Could not perform task because the machine is currently shutting down.] [] [855638aa2a36dc9f8cfb89f4a6299c6e]
    What is the problem, what can I do?
    Thank you,
    va

    The simplest thing would be to configure the policies to not force a
    logoff. If you look at the MS Policy Spreadsheet, the number of items
    requiring a logoff to take effect are miniscule.
    On 6/10/2014 7:16 AM, bakoseva wrote:
    >
    > We use Windows 2008 terminal servers with ZCM 11.1.
    > One of our user has a message again and again (1-2 times a day):
    > "ZENWorks - Logging off
    > ZENWorks policies have been applied on the device which require a
    > relogin to take affect. Save your work before relogin occurs."
    >
    > The policies didn't change nowadays, and just one user gets the
    > message.
    > If this user logs in another terminal server he gets same message
    > there.
    >
    > The zmd-messages.log:
    > [BundleManager] [BUNDLE.MachineShuttingDown] [Could not perform task
    > because the machine is currently shutting down.] []
    > [855638aa2a36dc9f8cfb89f4a6299c6e]
    >
    > What is the problem, what can I do?
    >
    > Thank you,
    > �va
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Some obsolete objects have been removed from the query. (QP0027)

    HI All,
    I'm Getting the below error whenever i try to export my Universe to the reposotory.
    "Some obsolete objects have been removed from the query. (QP0027)"
    I know what this error means but i need to know do i get out of it.
    I have to click ok N number of times to export this universe to Rep.
    I have more than 1300 objects in my univers and more than 100 tables.
    Please suggest how to fix this issue.
    Thanks,
    Ravichandra K

    >
    wavery wrote:
    > Hi Simon,
    >
    > Can you explain what you mean by "spin it off" if your Universe has more than 100 tables?
    >
    > Thanks
    Hi wavery, when you have more than 100 tables in the universe, the chance these tables are all used by the same functional group is very slim. When I say functional groups, I mean groups of users from, say Inventory Management Department or Financial Planning Department for example. You can then break up the humongous universe into multiple smaller universes that cater these functional groups. It makes the universes more manageable. When a universe gets too large, it becomes more and more difficult every time when you are trying to troubleshoot for problems.
    There are of course different schools of thought.  Some argue that you do not want to have to recreate the common objects, like date/time LOVs and condition objects or organizational hierarchy LOVs and condition objects (we have a whole bunch of those). The management in our company favored this school of thought, and that got us into big trouble. We have a universe that is so big and so complex that even the developers have difficulty figuring out which object is for what purpose. Then management came up with another idea of using link universes to provide self-service to the business users. And that did not go well either, but that is another story.
    Every company has different business needs. So there is no cookie-cutter formula. You have to sit down and review your business needs, and figure out what makes sense to break up the large universe into more manageable smaller size universes.
    Hope this helps. Please feel free to post again if you have further question.

  • How to Identify what Portal Patches Have Been Applied?

    hi All
    I need to identify which patches have been installed in my OAS Installation. I have OAS 9.0.4 installation on HP/UX, and i need to import some page groups from a production environment but i´am reading note 263995.1 for import/export issues and i need to find out if patch 3277149 it´s already applied in my testing environment.
    Where can i find this patch? is there any table where i can query for patches installed?
    regards

    I believe the table is wwutl_patch$.
    Please check metalink note 279771.1.
    Regards

  • I heard that some iphone 5s have been recalled, how to tell if mine is one of theym

    I heard that some iphone 5's have been recalled.  how do I know if mine is one of them?

    The replacement program links are:
    https://www.apple.com/support/iphone5-battery/
    iPhone 5 Sleep/Wake Button Replacement Program - Apple Support
    Both have a place for you to put your device Serial number to see if it is eligible.\
    Cheers,
    GB

  • How do I save into iphoto some images that have been emailed to me without having to select and save each one?

    Hi - I have received lots of emails with photos from a recent party, but I cant seem to select them and save them into iphoto as a group - so far I have been selecting them one by one, but I am getting a bit weary of that! I am sure there a faster way.... any ideas?

    Hi Bamber17,
    When you're in Mail, click and hold on the Save button and it'll bring up a drop down showing all the photos that are attached to that particular email message. Then choose the "Add to iPhoto" option. Should save you a lot of time.

  • How can I determine which service packs have been applied?

    Our installed version of business objects enterprise R2 is indicted as 11.5.3.4175 in the support information selected from the Add/Remove Programs listing of Business objects Enterprise R2......
    How / or what information can I refer to in order to compare the version # to in order to determine which SP#'s and / or fix patches have been installed?

    To verify that you have SP2 or SP3
    installed (Windows)
    1. Go to Start > Settings > Control Panel.
    2. Double-click Add or Remove Programs.
    The "Add or Remove Programs" dialog box opens.
    3. Check the list for BusinessObjects XI Release 2 Service Pack 2 or
    BusinessObjects XI Release 2 Service Pack 3.

  • How to edit a PDF created with Acrobat XI Pro after signatures have been applied (like I can in 7, 8.0

    I have a major issue that I need to resolve before we can purchase Acrobat XI Pro:
    Currently, with Acrobat 8.1 Pro, after all signatories sign a document, we add an Effective Date (we add it after they sign since we don't know when the last signature will be acquired and we can't have an Effective Date that is before the date of the last signatory, otherwise, it would be effective before they signed it, which is not possible). I'm also allowed the latitude (as stated in our Documentation Control procedure) to make spelling corrections, hyperlink updates and minor formatting changes (by using the typewriter tool and also by replacing a page that is NOT the signed page if the change repaginates the document or involves modifying a hyperlink that has changed).
    In all of the previous versions of Acrobat that we've used (7 Pro, 8 Pro and 8.1 Pro) , this has been easily possible and all changes would be listed under the Signatures tab, which is exactly what we want, which is traceability.
    I'm using the trial version of Acrobat XI Pro now but am getting the message "This document is signed and can not be edited." If I bring the same PDF that was created from Word 2003 & 2013 using Acrobat XI Pro into 8.1 Pro, though, I CAN add the date, use the typewriter tool and replace non-signed pages, save it and exit without clearing or losing any signatures.
    My question is this: How can I do this in Acrobat XI Pro, as XI Pro (in the Signature pane) also lists the changes made to the document when it was edited using 8.1 Pro? (It's OK that the changes made to the PDF then mark the signatures as "invalid", as the reason why they were invalidated is also listed in the Signature pane, e.g. "Form Field Added", which is usually the applied Effective Date.)
    Thanks for any help!

    Acrobat versions prior to 9 had a bug which allowed you to do what you did. In Acrobat 9 this bug was fixed. In order to do what you want you need to certify (apply special certification digital signature with your certificate -- it is "Certify (Visible/Invisible)" choice in the "Work with Certificates") your document first. In the process of certification you can specify which modification permissions you allow the users of your document to make after signing. Certification signature must be the first signature in the document.

  • Deleted everything on my iphone and restored them.. I had alot of photos and videos.. Now some of them have been restored and a ton of other photos haven't been restored!!! And when i go to icloud tab it says ur data is currently being restored :( ...

    Btw now it's almost two days that am waiting without getting a new photo restored..
    PLEAASEEEE HELP ME IF U CAN  

    Photos are meant to be imported from the phone to your computer for archival and safekeeping.  Have you not been using your phone as designed?

  • HT201272 Hi I puchased a few songs and for some reason they have been deleted from my computer.  Can you help me

    I purchased  Karma yoga by yoga specialists from the pure yoga moods album,  Om by Wade Irme Morrissette,  Sattvam on Asana 2,  Ganesh Mahatmantra on Sacred morning chants.  
    They have all be errased from my computer.  Is there any way someone can help me retrieve them or re-download them?
    Thank you

    If you are in a country where music can be redownloaded, and you haven't changed countries since buying them and they are still in your country's store (and they aren't hidden), then you should be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage. If they show there but don't have the cloud symbol against them for redownloading then do you still have them listed in the Music part of your library ? If you do then deleting them from Music should then give you the cloud symbol against them in Purchased for redownloading.
    If you can't redownload them then do you have them on your backup of your library/downloads so that you can copy them back onto your library ? Or do you have them on your iOS device - you should be able to copy them back it via File > Devices > Transfer Purchases (though again, if you have them listed in the Music part of your library then you will need to delete them from there before Transfer Purchases will work).

  • Unstructured Name Parser - How to tell which Classification or Reclassification rules have been applied to a Name

    I am using the EDQ Unstructured Name Parser and have a Name value that isn't getting parsed.  I would like to know how the engine is classifying it or reclassifying it in order to set up some reclassification rules of my own to ensure that it gets resolved correctly.
    The name is something like Thomas J. Hamilton,Jr  ... I would expect it to classify as <valid Given>_<valid Initial>_<valid Family><P><valid Suff>.  Given a data record, how can I trace it back to see how it was classified and resolved?

    Hi Aaron,
    For starters, you can change the parser to run in "Parse and Profile" mode in the Advanced Settings in order to output more intermediate metadata. Then I'd recommend filtering the data going into parser to isolate the record you're interested in. Either sample data in the reader in the run preferences or just insert a value check processor before the Parser.
    Run the process through against and then look at the various steps of parsing in the different tabs of the results browser (Base tokenization, classification, unclassified tokens, etc.)
    regards,
    Nick

  • TS1717 how do i go about iTunes reloading some songs i have been billed for which did not download properly...

    how do i go about itunes reloading somesongs i have  already been billed for...

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Maybe you are looking for