Some Users on randomly basis unable to send mails from 2003 exchange to 2007 Exchange users Internally.
Hi All,
Some Users on randomly basis are unable to send e-mails from 2003 exchange to 2007 Exchange users Internally.
They are sending mails from outlook and users from 2007 dont have any issues.
But sometime mails from 2003 to 2007 goes without any issue.
The NDR reported is as below.
From: System Administrator
Sent: 22 February 2014 15:59
To: XYZ
Subject: Undeliverable: Regarding Test Message
Your message did not reach some or all of the intended recipients.
Subject: Regarding Test Message
Sent: 22/02/2014 15:59
The following recipient(s) could not be reached:
XXX,XYZ on 22/02/2014 15:59
The message contains a content type that is not supported
<HubServer.Domain.UK #5.6.0 smtp;554 5.6.0 STOREDRV.Deliver.Exception:PropertyValidationException; Failed to process message due to a permanent exception>
Hi,
According to the NDR, I found this point "The message contains a content type that is not supported".
Please verify whether the un-delivered messages contain some Sensitive
Information, signatures or attachments that cannot pass the Exchange 2007 Edge server. Please also check the content type of the un-delivered messages.
Found a useful KB for your reference:
Frequently asked questions about MIME and content conversion in Exchange 2000 Server and in Exchange Server 2003
http://support.microsoft.com/kb/836555/en-us
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support
Similar Messages
-
Unable to send Mail from POP account
I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.
-
Unable to send mails from Azure SharePoint 2010 VM
Hello All,
I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
But i am able to send mails from my on premise VMs to external domains.
ThanksHey There,
Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
After registration you get 400 E-mail per day free of charge.
From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
Hope it helps.
Ido -
I am unable to send mail from my Orange.fr account on my ipad add
Orange.fr lost personal data on Sunday, so I decided to change the password on my mail account which I did successfully can pick up and send mail via Thunderbird on my PC. However, I had to delete my orange account from the mail application as it would let me change the password in settings. I can now receive mail OK, but I an unable to send as I get the message that "That the username or password for "SMPT (email address)@smtp.orange.fr" is incorrect. I have checked the server settings against those on Orange.fr website, and they are correct. Any ideas what the problem is?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Unable to send mails from SCOT
Dear Gurus,
we need to configure outbound mails from SAP to our mail server.
I did everything as per the note, when i tested sending the mail, the status is waiting.
in SOST it is observed the status is " wait for communication service", mails are not being sent to target
server from SAP.
Could you please let me know how can i solve this issue.
Thanks and RegardsHi
One common missing parameter is the default domain (exemple : johndoe.com)
SCOT -> settings -> default domain
check that in your SMTP node :
- the color is green
- the box "node in use" is checked
- SMTP connection is filled with right informations (smtp server address, port)
- 'support adress type' section -> Internet is checked and in the menu 'SET' in 'adress areas' you have a line with '*' value (this means that email can be sent to anyone)
Other check :
- at os level can you reach the SMTP service ?
telnet <server adress> <port>
Hope this will help you
Edited by: Aymeric Douyere on Feb 23, 2010 7:37 PM -
Hi i am unable to send mail from yahoo mail id.can any one help on this?
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="pop3.yahoo.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames = {"c:\\gopi.txt"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
while compliling this one its compiled succesfully but i am getting exception at run time like..D:\mail>java MailClient
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/activation/re
gistries/MailcapFile
at javax.activation.MailcapCommandMap.loadFile(MailcapCommandMap.java:275)
at javax.activation.MailcapCommandMap.<init>(MailcapCommandMap.java:128)
at javax.activation.CommandMap.getDefaultCommandMap(CommandMap.java:44)
at javax.activation.DataHandler.getCommandMap(DataHandler.java:136)
at javax.activation.DataHandler.getDataContentHandler(DataHandler.java:568)
at javax.activation.DataHandler.getContent(DataHandler.java:501)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1253)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at MailClient.sendMail(MailClient.java:35)
at MailClient.main(MailClient.java:72)
can any one help on this....plz
thanks in advance
Edited by: Konapalli.Gopi on May 20, 2010 5:42 PMSomething's wrong with your CLASSPATH.
If you're not using JDK 6, you need to include activation.jar in your CLASSPATH.
If you've got any other jar files that define the javax.mail.* or javax.activation.* classes
in your CLASSPATH (such as javaee.jar or j2ee.jar), remove them. -
Unable to send mails from SOST to Outlook
Hi,
We have an issue with the messages to be sent from SOST to MS Outlook. When we run the job in SOST, the messages are sent successfully (status shows in 'green' light) but the messages are NOT being received by the Recipient(s).
We have checked and verified the followiing :
1. User's ID is maintained in SU01.
2. Communication method is defined correctly in SU01.
3. In SCOT, default domain is correctly defined.
4. Also, in SCOT, correct Host, Port & Internet settings are defined.
Please let me know if we are missing anything.
Regards
Sudarsan
Edited by: Sudarsan Sampathkumar on Oct 29, 2010 8:52 AMHi,
If you could see the return code 73 in SOST then it means that the message is sent from SAP and now the message has to be flushed out from the exchange server. Check with the Exchange admin to have a look at that.
I assume that u have set all the relevant profile parameters.
Have a look at the [Link|http://tamboly.com/SAPEmailConfiguration.html] which will be helpful.
Regards,
Varadharajan M -
Unable to send mails from apex3.0
Hi friends,
When i am trying to push the mail queue i am getting this error..please help me
ORA-29278: SMTP transient error: 421 Service not available
Regards,
Rags.Hi Rags,
Look wether the SMTP Service is running.
Try to set smtp_out_server parameter to a valid smtp server.
Have a look at another thread:
ORA-29278: SMTP transient error: 421 Service not available
Also you have to read this document:
http://www.oracle.com/technology/products/database/application_express/howtos/howto_workflow.html
Could be the bug described in doc.id 4083461.8 on metalink, affects
all version prior to 10.2
Hope you find the solution,
ben -
Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1
Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs IOS 3.1.3
iPhone 3Gs IOS 4.3.3
iPhone 4 IOS 4.3.3
iPhone 4 IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry -
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
Hi there. I'm an iphone 4s user and i am unable to send text messages. Any time i try, I get the message "message send failure" can anybody help?
try contacting your carrier and see if they can resolve the issue.
-
Unable to send mails to some of the e-mail-ids
Hi Friends
I have configured the SCOT for sending mails from SAP. When HR is trying to send the payslip from SAP the email is
not received by some of the employees. When I look into the outbox I'm seeing the message as waiting for communication
service. When I'm checking in SOST the return code message was 802.
Pleae help me.
RegardsHi,
Check what type of recipient? which one your using?
Types:
'B' : SAP user name
' ' : SAPoffice name
'C' : Shared distribution list
'F' : Fax number
'U' : Internet address
'R ' : Remote SAP name
'X' : X.400 address
If 802 is the error message then recipient is unknown.check in su01 to see if the user is maintained with Email address and if ur not having authorisation then check with su01d.
Thanks
Shaz
Edited by: Shazad Ali Khan shaz on Jun 6, 2010 9:51 AM -
Unable to send mails to outlook from sap system through workflow
Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012 17:50:12 0380 MIME_MESSAGE_GENERATE G Error when generating MIME flow
02/13/2012 17:50:12 0382 MIME_MESSAGE_GENERATE G Required 'From' header is initial
02/13/2012 17:50:12 0167 SO_OBJECT_MIME_GET G Error during MIME Generation
02/13/2012 17:50:12 0777 UPDATE_SOSC G Cannot process message in SAP System
Regards
RAGHAVENADARHello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M -
Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue? -
Unable to send email from iPhone or ipad, Unable to send email from iPhone or ipad
Recently, I have become unable to send emails from my comcast email account. I tried uninstalling and reinstalling the account, but get an error (Cannot send. Username or password for Comcast invalid). The username and password are correct, though, as my email works fine on my non-Mac laptop. Any suggestions?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom
Maybe you are looking for
-
Using Mini DVI to VGA adapter on MacBook
I bought the adapter from Apple & hooked up my LCD monitor to the MacBook, but the video I get on the monitor is different that on my laptop. It has an old screen background & the dock but nothing on my desktop shows up. Also, when I'm plugged to the
-
My ipod touch 3G got V4.2.1 and I want IOS 5 but it said that my ipod has the lates version. How I Update To Ipod IOS 5?
-
Dear Experts, I am an novice to IBM Products, i installed IBM Java Sdk 1.4.2, WebSphere, On starting the websphere i encounter an error. WARNING: Some GBeans were not started successfully: TomcatWebConnector (failed,redirectPort=8443,port=8080) What
-
How do i remove the office 2004 test drive from my computer? I tried using the remove office app included in the folder but it says it has no office files on the computer? How can i remove this folder and its apps? just move to trash? and it will del
-
New Playbook won't accept file transfer from blackberry or computer
I bought a Tablet 3 days ago and spent an insane amount of time searching for an answer. It bridges fine with my 9700 and I can go back and forth, my wifi connection / bluetooth are fine. When I try to send photos from my 9700 to my Tablet, I get a