Some valuable inputs required on SAP Netweaver connection in xcelsius
Hi Gurus,
i am going to create the dashboard on top of SAP Query in xcelsius. can someone share some best practices on that.
I have a requirement where the user should be prompted for the date and year variable.i need the help on variables as well.
i would really appreciate if someone could share some realtime experience on this connection.
Regards
Abid Paul
Hi,
Below are the step by step procedure:
1. Place a input text control on the dashboard for user input for year variable.
2. double click the control will open the property sheet.
In this you set the "destination" property to a cell in the excel spread sheet.
so when the user inputs the year in the input text it will be passed to excel cell.
For passing this year value to the query:
Open the data manager and add the sap netweaver Bi connection.
In the definition tab select the input variable and in the "read from " property select the same cell in excel which you set as a destination for the input text control.
You also need to set the trigger cell property as "When value Changes"under the usage tab to the same excel cell.
After these settings, when the user enters a year the query will run for that year and if he enters another year the query will rerun with the new value for the year.
This is a general procedure. if you have any specific requirement let me know.
Hope this helps.
Uma
Similar Messages
-
System requirements for SAP Netweaver
Hi All
I would like to know the system requirements for SAP Netweaver installation on server.
Thanks in advance
VenkatHi Venkat,
Typically for EP it would be :
On Windows:
2 GR RAM,with 30-40GB HD,and with latest Windows SP`s and latest IE.
If the server is for Production incease the RAM accordingly.
For Portal RAM is very crucial,as SAPJ2EE Engine uses lot of RAM.
I hope this helps.
If yes,do award points.
Rgs
vikas -
Xcelsius with SAP netweaver connection extremely slow when executing
Hi everybody,
I am building a quite complex Xcelsius dashboard with multiple connections and many components with individual mappings.
My initial load time is now around 5 minutes (the netweaver portal loading icon) and the initialization is around 1 minute (the Xcelsius initialization icon). When I check the BI statistics using &profiling=x in the end of the URL I can see that the process "initialize item XC_DASHBOARD_ITEM_1" is causing 95% of the load time.
I read in the how to guide "how to.. build fast and efficient dash boards using the new netweaver BW integration in SAP BusinessObjects Xcelsius" that the swf should be cached on the SAP system when using SAP netweaver BI 7.0, EHP1, SP6 patch 40. I can see in our system that we are on 7.01 with SP6. However, I cannot see the patch level. The cache in the query monitor is turned on, but it seems like only queries are cached in here.
Does anyone know where I can check if the swf file is being cached on the SAP system? And do you know how to minimize the time spent on the process "initialize item XC_DASHBOARD_ITEM_1" on the JAVA and ABAP stack?
I know that I could probably remove many of my mappings and components in the dashboard to get better performance, but then I cannot build the dashboard as intended. By the way, most of my connections only retrieve data when the users are navigating, so only very few connections are refreshed before load and this is maximum 20-30 cells altogether.
Thanks in advance!
Best regards,
MortenHi Morten,
YOu can observe the SWF caching in the HTTP trace ..along with the time stamp.
For patch you can check via the SDT as per note 937697.
Thanks,
Nandan -
System Requirements for SAP Netweaver 2004 (BW 3.5)
Hi,
We have an SAP BW 3.0B system running at the moment and we are in the process of upgrading to SAP Netweaver 2004 (BW 3.5).
I'll like to know if there are any additional system requirements for upgrading the system to SAP Netweaver 2004 (BW 3.5). We do not intend to make use of the Java options for the meantime.
Any documentations will be appreciated.
Points to be awarded accordingly.
Regards,
UcheHi,
Pls visit https://service.sap.com/instguides and download the latest Upgrade guide.
Hope this is useful
Regards
Umesh -
Some FTP servers require active mode for connection.
Is there any option for select active mode during FTP server connection in iweb ?
No, but go and Click on the Apple symbol on your Mac and then open System Preferences. Once is System Preferences go and open Network and then in the bottom right corner of Network click on Advanced and then click on Proxies and at the bottom of the Proxies page there is a setting called passive ftp mode that might be check by default. If it is, then try unchecking it and then uploading your site with iWeb ftp and seeing what happens.
If this does not work, then your other option of course is to publish your site to a local folder from iWeb and then use something like Cyberduck to upload your site. -
SAP NetWeaver BI Connections - Xcelsius 2008 - XI 3.1 Enterprise
Dear Xcelsius experts,
We would like to use "SAP NetWeaver BI Connections" connecting SAP BI Queries directly in Xcelsius 2008, we read in "Xcelsius2008_user_guide_en" that there is this new connection available.
Our Xcelsius 2008 is connected in a BO XI 3.1 Enterprise, but this connection is not available.
How to show and use this new connection type to read SAP BI queries directly ?
Best regards,
Mauro.Dear all,
please find the list of products required to run the new BI NetWeaver Connection in Xcelsius:
Client:
Xcelsius 2008 SP2
NetWeaver Bex Clients greater 7.10 Patch 9.01 (this provides BEx open/save Dialoge infrastructure and more )
Server:
NetWeaver 7.00 Ehp1 SP5 (both ABAP and Java - configured for BEx Web Usage)
Please note that they are partly not released yet: Release date for SP5 is planned for End of September 2009.
Best regards, Olaf -
Suggestion on Good Books for SAP NetWeaver Administrator
Hi,
I am very new to SAP NetWeaver. Can any one please suggest some good books to learn SAP NetWeaver Administration. Is SAP NetWeaver For Dummies is good book to start with?
I want to understand the SAP NetWeaver Architecture and also want to learn from SAP Basis administration/Consultant point of view. So which book can help?
Also I got to kmow, SAP NetWeaver includes the following components and tools:
Components:
SAP Auto-ID Infrastructure
SAP Business Intelligence
SAP Enterprise Portal
SAP Exchange Infrastructure
SAP Master Data Management
SAP Mobile Infrastructure
SAP Web Application Server
Tools
SAP Composite Application Framework
SAP NetWeaver Developer Studio
SAP Solution Manager
So from SAP Basis Consultant point of view, which Componet one should learn or focus on?
Appreciate help.
Thanks
Regards,
BasisCK.Hi Nitin,
Thanks for the reply. SAP R/3 Handbook, Third Edition - By Jose Antonio Hernandez, Franklin Martinez, James Keogh
~
Table of contents
Chapter 1: SAP: From SAP R/3 to SAP NetWeaver
Chapter 2: The Architecture of the SAP Web Application Server
Chapter 3: SAP NetWeaver: An Overview
Chapter 4: Using SAP Systems
Chapter 5: Upgrading to SAP R/3 Enterprise: The First Step into SAP NetWeaver
Chapter 6: The Change and Transport System
Chapter 7: Development Options with SAP Solutions: ABAP Engine
Chapter 8: User Management and Security in SAP Environments
Chapter 9: Web Application Server System Management
Chapter 10: Performance and Troubleshooting with SAP Solutions
Chapter 11: SAP for IT Managers: Implementation, Planning, Operation, and Support of SAP Systems
INDEX
~
Is this book completely talk about SAP NetWeaver or it's kind of transition/bridge from SAP R/3 to SAP netweaver?
Since you are experienced in Netweaver technology, can you suggest the step by step approach to be master in this?
I mean read this book first, then what next? what component I should go for it? XI, EP??
Appreciate your help and inputs.
God bless u.
Thx
Regards.
Basis CK. -
Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista
This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!! Here is the contents of log.txt:
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\log.txt for details.
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Faisal,
Thanks for your response to my question. I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB. After installing VirtualDisk I only have 38GB of free space on my hard drive. System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB. Why are more than 50GB required?
If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
Thanks for your help!
Gary -
WebDynpro for Abap in SAP NetWeaver
Hi Experts,
I need some help, i'm using SAP Netweaver to develop a WebDynpro application but the thing is that when i try to open the Layout tab of the view i can't see the elements or the tools?
I don't know what to do i have been searching for weeks and i don't find the answer.
Regards,
Cesar Felcedid you activate the necessary service from transaction SICF
Raja -
Trainings for SAP NetWeaver 7.3
I was not able to find the training courses for NetWeaver 7.3 solutions. When is SAP expected to come up with these trainings?
Regards,
NoufalThis depends on NetWeaver component I would say. There are training for some components available already:
[OKP SAP NetWeaver 7.3 for Developers|https://training.sap.com/us/en/course/onwd73-okp-sap-netweaver-73-for-developers-e-learning-095-us-en/]
[OKP SAP NetWeaver 7.3 Process Integration|https://training.sap.com/us/en/course/opi73-okp-sap-netweaver-73-process-integration-e-learning-095-us-en/]
[OKP SAP NetWeaver 7.3 Portal|https://training.sap.com/us/en/course/onwp73-okp-sap-netweaver-73-portal-e-learning-095-g-en/] -
Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux
Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
Thanks,
LukeHi Sajesh,
The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
Luke
1 Overview
Purpose
This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
Platforms
You can install the SAP NetWeaver Developer Studio on:
Windows 2000
Windows XP
Web Browser
You require Internet Explorer 5.5, or higher.
Minimum Hardware Requirements
The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor. -
Error # 2032 while opening SAP BI Query in Xcelsius using Direct connectivi
Hi Experts,
I have following set up -
Xcelsius Enterprise 2008 SP3
SAP BI EHP1 - SP5
Operating System - XP
SAP GUI 710.
I have two systems - 1. Internal IDES and 2. Client system
I open a Xcelsius and try to create a connection "SAP BW NetWeaver connection" in Xcelsius, I am prompted for login details.
1. When I give internal IDES system credentials, it logs me in and the queries are displayed and I can select any query without any error.
2. When I give client system credentials, it logs me in, and shows me the BW queries. Once I select any query, it gives me "Error # 2032"
RSPOR_T_PORTAL in SM30 is set properly as expected and explained in http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333393330333733303333%7D.do
Can anyone help me to resolve this issue?
Timely help would highly be appreciated!
Regards,
RashmiHey there.
We've solved the problem on our test systems.
But we have got a special constellation. Our BW Portal is running on an other machine than the ABAP Stack.
Meaning, maybe it's not for all of you the solution.
But it was very simple in the end.
We've patched our System (ABAP and Java Stack) to SP6 (its now 7.01 SP6).
The reason was a missing rfc service that should have come with the SP5 patch. But it wasn't.
If the service is present could be tested with opening the following link:
http://<portalserver>/crossdomain.xml
Result shouldn't be the 404 page.
Please tell us if that was the solution for you, too.
Greetings -
How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
GalynaHi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K. -
Connecting SAP Netweaver ABAP Trial Version from 2 Laptops
Hi All,
I have a scenario where in I have installed SAP NetWeaver ABAP Trial 7.1 version on one Laptop. All the Presentation and application server are also installed on the same laptop and everything is working fine. Here NetWeaver is installed on Windows Vista.
Now, I would like to connect to SAP NetWeaver from another Laptop. In the other laptop i have Windows XP installed. I will install the SAP Front end and will supply all the application server details.
Is this approach proper or do i need to do something more to it?
It would be great if someone can provide some more information on this. I checked the Forum for this but as of now i couldn't find much resources or discussion on this.
Thanks and Regards,
Samantak.Hi Martin,
yes. It's true the SAP is still a client Server Application, but is SAP NW AS ABAP Trial version also supports - multiple systems?
If yes how does it do this? What are all the configuration settings required?
I have checked the SAP GUI for the main laptop where my NW AS is installed and found that the application server is configured as localhost. If there is no proper address of the application server then how to connect it with the system from another laptop?
Hope you got my point. But thanks for answering.
Waiting to hear more from you soon
Thanks,
Samantak. -
Error #2032 when using SAP NetWeaver BI Connection
Hi,
I'm trying to use to new SAP NetWeaver BI Connection in Xcelsius SP2, but when I try to connect to a BEx Query, I receive error #2032.
I have a crossdomain.xml file in the Tomcat root of the BO-server, and the Adobe Global Security Settings are also filled in with all directories of my BO-server.
Has someone an idea why this error occurs, and how to solve it?
I'm working on Sap NetWeaver 7.0.1 SP5.
LievenWe are using in total 6 different clients with Xcelsius 2008 Enterprise SP2. With two of them we can use SAP NetWeaver BI Connection and do not receive any error. The rest is showing the error message #2032.
There is one difference between the systems which are working and the ones which are not:
After selecting the query in the BI NetWeaver Connection there is an additional popup "Windows security" appearing.
--> The server sapbw100.xxxx at BicsRemote/Config1 requires a username and password.
Filling in the username and password the data from the query appear in the xcelsius.
With the clients which provide an error there is no such popoup.
If we create on an existing installation an .xlf file and open it on one which is not working, the Data Managers show the correct connection. As soon as we click on refreshing data, error #2032 appears.
System configuration clients:
Windows XP and Windows 7
Office 2007
SAP Business Explorer Patch 1001
Regarding the working clients:
One is working on XP the other on Windows 7
Both on Xcelsius 5.2.0.0
Installing the FixPatch for SP2 is also not helping to solve the problem.
All the inputs in this thread have been tested but without sucess. Till now we could not install note 1380059 since related notes are not yet released.
Maybe you are looking for
-
TFS performance report pack not working on TFS 2013
Hi I have TFS 2013 setup and I found TFS performance report pack from http://blogs.msdn.com/b/granth/archive/2009/02/03/announcing-tfs-performance-report-pack.aspx URL. These reports don't work after uploading to my report server. The blog talk about
-
Imy iPhone sounds are not working. Any help please
I have an iPhone 4s. I Powered it offhand when I opened it again all the sounds like the keyboard sounds and the sound u here when u unlock the phone. Even the music in games are not working. However, when I listen to music or watch videos on YouTube
-
Hi all, is it possible to overload the run method of a Thread. Thank You Panikiran
-
CSS, Design Mode vs Live Mode vs Missing Manual
Hi, I downloaded the trial version of DreamWeaver to see if I'd like to purchase it. To get a feeling for it, I've been using the CSS3 Missing Manual and doing the tutorials. Several times I've put code into DreamWeaver then clicked over to Live/Desi
-
Hello IO is updated from ODS. System generates an error : duplicate data records. This is because keys of ods dont match keys of infoobject. I can build an other ods to aggregate data before loading to infobjects. Are there any ways to do it in start